Sanyo PLC-WL2500 Owner's Manual

Sanyo PLC-WL2500 - 2500 Lumens Manual

Get Sanyo PLC-WL2500 - 2500 Lumens PDF manuals and user guides
UPC - 086483078859
View all Sanyo PLC-WL2500 manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo PLC-WL2500 manual content summary:

  • Sanyo PLC-WL2500 | Owner's Manual - Page 1
    Multimedia Projector MODEL PLC-WL2500 Network Supported □ Wired LAN * Refer to the owner's manual below for details about network function. □ Network Set-up and Operation Owner's Manual
  • Sanyo PLC-WL2500 | Owner's Manual - Page 2
    projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. L�a�r�g�e��S�c�r�e�e�n��i�n��L�im��i�te��d�S��p�a�c�e� Short focus lens allows you to project large images from short distance and maintains lamp life. (p.51)
  • Sanyo PLC-WL2500 | Owner's Manual - Page 3
    the Projection Lens 62 Cleaning the Projector Cabinet 62 Lamp Replacement 63 Resetting the Lamp Counter 64 Appendix 65 Troubleshooting 65 Menu Tree 68 Indicators and Projector Condition 70 Compatible Computer Specifications 71 Technical Specifications 73 Optional Parts 74 The
  • Sanyo PLC-WL2500 | Owner's Manual - Page 4
    Troubleshooting" section in the back of this manual. If the problem still persists, contact the dealer where you purchased the projector or the service distances must be maintained. -Do not cover the ventilation slot on the projector. Heat build-up can reduce the service life of your projector
  • Sanyo PLC-WL2500 | Owner's Manual - Page 5
    . Use only with a cart or stand recommended by the manufacturer, or sold with the projector. Wall or shelf mounting should follow the manufacturer's instructions, and should use a mounting kit approved by the manufacturers. An appliance and cart combination should be moved with care. Quick stops
  • Sanyo PLC-WL2500 | Owner's Manual - Page 6
    is being used (p.57). Failure to do so may affect the projector life. C AUTION ON CEILING MOUNTING For ceiling mounting, you need the ceiling mount kit designed for this projector. When not mounted properly, the projector may fall, causing hazards or injury. For details, consult your dealer
  • Sanyo PLC-WL2500 | Owner's Manual - Page 7
    the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Model Number PLC-WL2500 Trade Name Sanyo Responsible party : SANYO NORTH AMERICA CORPORATION Address 21605 Plummer Street
  • Sanyo PLC-WL2500 | Owner's Manual - Page 8
    Lamp Cover ② Top controls ③ Adjustable feet ④ Infrared Remote Receiver ⑤ Projection Lens ⑥ Speaker ⑦ Lens Cover CAUTION Do not turn on a projector LAN Connection Terminal is for the Network function. Refer to the owner's manual of "Network Set-up and Operation" .  Kensington Security Slot This
  • Sanyo PLC-WL2500 | Owner's Manual - Page 9
    the LAN cable (refer to the owner's manual of "Network Set-up and Operation"). ② HDMI Connect the HDMI signal from computer or video equipment to this AUDIO IN terminal (⑧ or ⑨) or HDMI terminal ② (digital audio). ⑦ CONTROL PORT When controlling the projector with RS-232C, connect the control
  • Sanyo PLC-WL2500 | Owner's Manual - Page 10
    detects abnormal condition. This also blinks red when the internal temperature of the projector exceeds the operating range. (pp. 60, 70) ③ LAMP REPLACE indicator Turn yellow when the life of the projection lamp draws to an end. (pp. 63, 70) Top controls ① ② ⑥ 10 ③ ④ ⑤ ① ON/STAND-BY
  • Sanyo PLC-WL2500 | Owner's Manual - Page 11
    Remote Control Part Names and Functions ① ② HDMI ③ ㉒ ④ ㉑ ⑳ ⑤ ⑥ ⑲ ⑦ ⑧ ⑱ ⑰ ⑨ ⑯ ASPECT ⑩ ⑮ ⑪ ⑭ ⑬ ⑫ ① ON/STAND-BY button Turn the projector aspect from 4:3, 16:9 and 16:10. (pp.25,50) ⑯ LAMP button Select a lamp mode. (pp.25, 54) ⑰ P-TIMER button Operate the P-timer function
  • Sanyo PLC-WL2500 | Owner's Manual - Page 12
    is replaced by an incorrect type. ● Dispose of used batteries according to the instructions or your local disposal rule or guidelines. Remote Control Operating Range Point the remote control toward the projector (Infrared Remote Receiver) when pressing the buttons. Maximum operating range for the
  • Sanyo PLC-WL2500 | Owner's Manual - Page 13
    be set perpendicularly to the plane of the screen. The projector will focus at distance from 2.09' to 3.93' (63.6 cm to 119.7 cm). Note: • This projector is not equipped with an optical zoom. To adjust the screen size, change the throw distance. • The brightness in the room has a great influence on
  • Sanyo PLC-WL2500 | Owner's Manual - Page 14
    to a Computer Cables used for connection • VGA cables (Mini D-sub 15 pin) * • Audio cables • HDMI-DVI cable (*One cable is supplied; other cables are not supplied with the projector.) DVI Output Monitor Output or Monitor Input External Audio Equipment Monitor Output Audio Output Audio Input
  • Sanyo PLC-WL2500 | Owner's Manual - Page 15
    Cables used for connection • Video and Audio cable (RCA x 3) • S-video cable • Audio cable (Cables are not supplied with the projector. ) Installation External Audio Equipment Video and Audio Output S-video Output (Video) (L) (R) Audio Input S-video cable Video and audio cable Audio
  • Sanyo PLC-WL2500 | Owner's Manual - Page 16
    cable • Component cable • Component-VGA cable • HDMI cable (Cables are not supplied with this projector.) Component Video Output RGB Scart 21- (Y, Pb/Cb, Pr/Cr) pin Output HDMI Output Audio Output External Audio Equipment Audio Input HDMI cable Component cable ComponentVGA cable Scart
  • Sanyo PLC-WL2500 | Owner's Manual - Page 17
    any other type of power system. If you are not sure of the type of power being supplied, consult your authorized dealer or service center. Connect the projector with all peripheral equipment before turning it on. CAUTION The AC outlet must be near this equipment and must be easily accessible. Note
  • Sanyo PLC-WL2500 | Owner's Manual - Page 18
    .) Note: The Filter warning and Lamp replacement icons may appear on the screen depending on the usage state of the projector. Video / PC selection window If the projector is locked with a PIN code, PIN code input dialog box will appear. Enter the PIN code as instructed on the next page. Input
  • Sanyo PLC-WL2500 | Owner's Manual - Page 19
    the number in a column on page 76 of this manual and keep it on hand. Should the PIN code be missing or forgotten, consult your dealer or service center. PIN Code Input Dialog Box After the OK icon disappears, you can operate the projector. Note: • If the PIN code number is not entered
  • Sanyo PLC-WL2500 | Owner's Manual - Page 20
    the remote control or on the top control, and Power off? appears on the screen. 2 Press the ON/STAND-BY button again to turn off the projector. DO NOT OPERATE THE PROJECTOR CONTINUOUSLY WITHOUT REST. CONTINUOUS USE MAY RESULT IN SHORTENING THE LAMP LIFE. TURN OFF THE PROJECTOR AND LET STAND FOR
  • Sanyo PLC-WL2500 | Owner's Manual - Page 21
    The projector can be adjusted or set via the On-Screen Menu. The menu has a hierarchical structure, with a main menu that is divided into submenus, which are further divided into other submenus. For each adjustment and setting procedure, refer to respective sections in this manual. Remote Control
  • Sanyo PLC-WL2500 | Owner's Manual - Page 22
    or HDMI source, projector's operating configurations. (pp.44-58) ⑧ Information Display the input source information: Input , H-sync freq., V-sync freq., Screen, Language, Lamp status, Lamp counter, Power management, Key lock, PIN code lock and Remote control. (p.59) ⑨ Network See owner's manual
  • Sanyo PLC-WL2500 | Owner's Manual - Page 23
    function. When the image is not provided properly with this operation, manual adjustments are required. (pp.31-32) Remote Control HDMI AUTO SET button Keystone Correction ASPECT Press the KEYSTONE button on the remote control or on the top control. The Keystone dialog box appears. Use
  • Sanyo PLC-WL2500 | Owner's Manual - Page 24
    HDMI Basic Operation Sound Adjustment Direct Operation Volume Press the VOLUME+/- buttons on the remote control or on the top control to adjust the volume. The volume dialog box appears on the screen for a few seconds. Remote Control ASPECT Mute Press the MUTE button on the remote control to
  • Sanyo PLC-WL2500 | Owner's Manual - Page 25
    will appear on the Screen menu while the Freeze function is working. Fig.1 Remote Control COMPUTER 1/2 buttons HDMI VIDEO button HDMI button S-VIDEO button COMPONENT button FREEZE button D.ZOOM buttons ASPECT INFO. button LAMP button ASPECT button Note: When use the MUTE button to release the
  • Sanyo PLC-WL2500 | Owner's Manual - Page 26
    the No Show function, the mute function can not be operated at the same time. No show disappears after 4 seconds. HDMI P-TIMER button Press the P-TIMER button on the remote control to operate the Count up/Count down function. Refer to p.52 for detail of Setting for the P-timer function. To
  • Sanyo PLC-WL2500 | Owner's Manual - Page 27
    , correct input source should be selected through Menu operation as described below. Remote Control HDMI COMPUTER 1 button Top Control Computer 1 Computer 2 * Computer 1(RGB) ASPECT Computer 1(Scart) INPUT button HDMI Video Input Menu S-video *COMPUTER 2 can not be selected when using the
  • Sanyo PLC-WL2500 | Owner's Manual - Page 28
    the top control. Before using these buttons, correct input source should be selected through Menu operation as described below. Remote Control HDMI COMPUTER 2 button Computer 2 (RGB)* Top Control Computer 1 Computer 2 * *COMPUTER 2 can not be selected when using the COMPUTEARSPEICNT 2/ MONITOR
  • Sanyo PLC-WL2500 | Owner's Manual - Page 29
    is required. (pp.31-32) There is no signal input from the computer. Check the connection between your computer and the projector. (See "Troubleshooting" on page 66.) The preset system is manually adjusted in the PC adjust Menu. The adjusted data can be stored in Mode 1-10. (pp.31-32) PC Systems
  • Sanyo PLC-WL2500 | Owner's Manual - Page 30
    Auto PC adjustment can be stored in the projector. Once the parameters are stored, the setting can image is not provided properly with this operation, manual adjustments are required (pp.31-32). • The ) , or when the signal is coming from the HDMI terminal. Use Point ▲▼ buttons to select Auto PC adj
  • Sanyo PLC-WL2500 | Owner's Manual - Page 31
    enables you to precisely adjust several parameters to match those signal formats. The projector has five independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific computer. 1 Press the MENU button to display the On-Screen Menu. Use the
  • Sanyo PLC-WL2500 | Owner's Manual - Page 32
    when 480i, 575i, 480p, 575p, 720p, 1035i, or 1080i is selected in the PC System Menu (p.29). • When input computer signal to the projector, PC adjust will become available. Values of Total dots, Horizontal, Vertical, Display area H, and Display area V. Store Menu Vacant 32 Press MENU button to
  • Sanyo PLC-WL2500 | Owner's Manual - Page 33
    HDMI Image Mode Selection Direct Operation Select the desired image mode among Dynamic, Standard, Real, Blackboard (Green), Colorboard, Image 1, Image 2, Image 3, and Image 4 by pressing the IMAGE button on the remote control. Remote picture mode preset on the projector. Real Picture mode with
  • Sanyo PLC-WL2500 | Owner's Manual - Page 34
    Computer Input Image Adjustment 1 Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Image adjust and then press the Point ► or the SELECT button. 2 Use the Point ▲▼ buttons select the desired item and then press the SELECT button to display the adjustment
  • Sanyo PLC-WL2500 | Owner's Manual - Page 35
    can not display any resolution higher than 1920 x 1200. If your computer's resolution is higher than that, lower the resolution before connecting to the projector. •The image data other than 1280 x 800 is modified to fit the screen size in initial mode. •True and Digital zoom +/- are not available
  • Sanyo PLC-WL2500 | Owner's Manual - Page 36
    Input Custom adj. Adjust the screen scale and position manually with this function. Press the Point ► button adjustable range for Scale H/V and Position H/V is limited depending on the input signal. HDMI Remote Control POINT buttons SELECT button ASPECT D.ZOOM ▲ button D.ZOOM ▼ button Note:
  • Sanyo PLC-WL2500 | Owner's Manual - Page 37
    buttons, correct input source should be selected through Menu operation as described below. Remote Control HDMI VIDEO button Video S-VIDEO button S-video Top Control INPUT button Computer 1 Computer 2 * HDMI Video S-video *COMPUTER 2 can ASPECT not be selected when using the COMPUTER IN
  • Sanyo PLC-WL2500 | Owner's Manual - Page 38
    1(Component) or Computer 1(Scart) by pressing the the COMPONENT or COMPUTER 1 button on the remote control or press the INPUT button on the top control; choose HDMI by pressing the HDMI button on the remote control or press the INPUT button on the top control. Before using these buttons, correct
  • Sanyo PLC-WL2500 | Owner's Manual - Page 39
    select the system manually. PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N If the projector can not reproduce proper video image, select a specific broadcast signal COMPONENT VIDEO SIGNAL FORMAT If the projector can not reproduce proper video image, select a specific component video signal format from among
  • Sanyo PLC-WL2500 | Owner's Manual - Page 40
    HDMI Video Input Image Mode Selection Direct Operation Remote Control Select the desired image mode from among Dynamic, Standard, Cinema, Blackboard (Green), Colorboard, Image 1, Image 2, Image 3, and Image 4 by pressing the IMAGE button on the remote preset on the projector. Cinema Picture mode
  • Sanyo PLC-WL2500 | Owner's Manual - Page 41
    Video Input Image Adjustment 1 Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select the Image adjust and then press the Point ► or the SELECT button. 2 Use the Point ▲▼ buttons select the desired item and then press the SELECT button to display the adjustment
  • Sanyo PLC-WL2500 | Owner's Manual - Page 42
    options. Off.......... Disabled. L 1.......... For an active picture. L 2.......... For a still picture. Film........ For watching a film. With this function, the projector reproduces pictures faithful to the original film quality. Reset To reset the adjusted data, select Reset and press the SELECT
  • Sanyo PLC-WL2500 | Owner's Manual - Page 43
    Video Input Screen Size Adjustment This projector has the picture screen resize function, which Custom Provide the last stored aspect screen image. Custom adj. Adjust the screen scale and position manually with this function. Press the Point ► button at Custom adj. and the Custom adjustment menu
  • Sanyo PLC-WL2500 | Owner's Manual - Page 44
    Setting Setting This projector has a Setting Menu that allows you to set up the other various functions described below. 1 Press the MENU button to display the On-Screen Menu.
  • Sanyo PLC-WL2500 | Owner's Manual - Page 45
    set to On 1 or On 2, the status of Input and Lamp are displayed every time the signal is switched. • Only the last selected input source can be detected. • If the COMPUTER 1/2 button, VIDEO, S-VIDEO, COMPONENT or HDMI button on the remote control is pressed during Input search is in progress, Input
  • Sanyo PLC-WL2500 | Owner's Manual - Page 46
    is this option. Countdown off........ Show the input image instead of the countdown when turning on the projector. Use this function when you want to project the image as early as possible even when the lamp is not bright enough. Off Hide the On-Screen Displays except; ● On-Screen Menu
  • Sanyo PLC-WL2500 | Owner's Manual - Page 47
    Logo (Logo and Logo PIN code lock settings) This function allows you to customize the screen logo with Logo select, Capture, Logo PIN code lock and Logo PIN code change functions. Note: When On is selected in the Logo PIN code lock function, Logo select and Capture functions can not be selected.
  • Sanyo PLC-WL2500 | Owner's Manual - Page 48
    Then the captured image will be displayed the next time you turn on the projector. To cancel the capture function, select Yes in the "Quit?" confirmation (pp.33, 40). • A signal from a computer can be captured up to WXGA (1280 x 800). A signal from video equipment can be captured except for 720p,
  • Sanyo PLC-WL2500 | Owner's Manual - Page 49
    Enter a Logo PIN code Use the Point ▲▼ buttons to enter a number. Press the Point ► button to fix the number and move the red frame pointer to the next box. The number changes to . If you fixed an incorrect number, use the Point ◄ button to move the pointer to the number you want to correct, and
  • Sanyo PLC-WL2500 | Owner's Manual - Page 50
    is used to project the image from a ceiling-mounted projector. Rear When this function is set to On of the LCD panel. The orignal Screen Menu is available. HDMI setup This function is only used for HDMI input source . For details, refer to the owner's manual of your Digital RGB equipment. When the
  • Sanyo PLC-WL2500 | Owner's Manual - Page 51
    For reducing power consumption as well as maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not operated for a certain period. Select one of the following options: Ready When the lamp has been fully cooled down, the POWER indicator changes
  • Sanyo PLC-WL2500 | Owner's Manual - Page 52
    Be sure to turn off the projector properly (see "Turning Off the Projector" on page 20). If the projector is turned off in the incorrect set Exit To exit the P-timer operation. Stop or Cancel the P-timer via Remote Control To stop the P-timer, press the P-TIMER button. To cancel the P-timer,
  • Sanyo PLC-WL2500 | Owner's Manual - Page 53
    Closed caption Closed caption is a printed version of the program sound or other information displayed on the screen. If the input signal contains Closed captions, you can turn on the feature and switch the channels. Press the Point ▲▼ buttons to select Off, CC1, CC2, CC3 or CC4. If the Closed
  • Sanyo PLC-WL2500 | Owner's Manual - Page 54
    you to change brightness of the screen. Normal....... Normal brightness. Eco Lower brightness reduces the lamp power consumption and extends the lamp life. Remote control This projector provides two different remote control codes: the factory-set initial code (Code 1) and the secondary code (Code
  • Sanyo PLC-WL2500 | Owner's Manual - Page 55
    becomes locked and you do not have the remote control nearby or there is something wrong with your remote control, contact the dealer where you purchased the projector or the service center. Setting PIN code lock This function prevents the projector from being operated by unauthorized persons and
  • Sanyo PLC-WL2500 | Owner's Manual - Page 56
    -digit number. After entering the four-digit number, move the pointer to Set. Press the SELECT button so that you can start to operate the projector. If you entered an incorrect PIN code, PIN code and the number will turn red for a moment. Enter the correct PIN code all over again
  • Sanyo PLC-WL2500 | Owner's Manual - Page 57
    Failure to set the running speed of cooling fans properly may affect the projector life. Video delay control When you want to make a digital processing of a lamp life is reached. When replacing the projection lamp, reset lamp counter. See "Resetting the Lamp Counter" on page 64. Note: The Lamp
  • Sanyo PLC-WL2500 | Owner's Manual - Page 58
    Freeze (p.25), or No show (p.26). Warning log This function records anomalous operations while the projector is in operation and use it when diagnosing faults. Up to 10 warning logs are displayed with code lock, Logo PIN code lock, Lamp counter and Filter counter to the factory default settings. 58
  • Sanyo PLC-WL2500 | Owner's Manual - Page 59
    of the projector. HDMI Direct Operation Press the INFO. button on the remote control to display the Information Menu. Remote Control Menu The selected language is displayed. Lamp status The selected lamp mode is displayed. Lamp counter The cumulative lamp operating time is displayed. Power
  • Sanyo PLC-WL2500 | Owner's Manual - Page 60
    can not be turned on and the WARNING indicator still lights red, unplug the AC power cord and contact the service center. CAUTION DO NOT LEAVE THE PROJECTOR WITH THE AC POWER CORD CONNECTED UNDER AN ABNORMAL CONDITION. IT MAY RESULT IN FIRE OR ELECTRIC SHOCK. Top Panel WARNING emit a red
  • Sanyo PLC-WL2500 | Owner's Manual - Page 61
    may result in internal heat buildup and adversely affect the life of the projector. If a "Filter warning" icon appears on the LCD panels, or optical elements inside the projector degrading the quality of a projected image. When the symptoms above are noticed, contact your authorized dealer or service
  • Sanyo PLC-WL2500 | Owner's Manual - Page 62
    its vicinity. The explosion or fire hazard may occur even after the AC power cord is unplugged because the temperature inside the projector is extremely high due to the lamps. In addition, there is a risk that the internal parts may be damaged not only by the flammable air spray but also by
  • Sanyo PLC-WL2500 | Owner's Manual - Page 63
    Screws Handle Lamp ORDER REPLACEMENT LAMP Replacement lamp can be ordered through your dealer. When ordering a projection lamp, give the following information to the dealer. ● Model No. of your projector ● Replacement Lamp Type No. : PLC-WL2500 : POA-LMP141 (Service Parts No
  • Sanyo PLC-WL2500 | Owner's Manual - Page 64
    with a new one IMMEDIATELY after the projector has cooled down. (Follow carefully the instructions in the Lamp Replacement section of this manual.) Continuous use of the lamp with the LAMP REPLACE indicator lighted may increase the risk of lamp explosion. ● A Lamp may explode as a result of
  • Sanyo PLC-WL2500 | Owner's Manual - Page 65
    Input mode or - That is the Filter warning icon or the Lamp replacement icon. See Lamp mode icon appears. page 58 or 63. Image is out of focus. - Adjust focus of the projector. See page 23. - Provide proper distance between the projector and the projection screen. See page 13. - Check the
  • Sanyo PLC-WL2500 | Owner's Manual - Page 66
    to a projector. See your computer's instruction manual for the setting. - Press the NO SHOW button or any other button on the remote control. No sound - Check the audio cable connection from audio or when the digital signal is input into HDMI terminal. See page 30. The setting does not
  • Sanyo PLC-WL2500 | Owner's Manual - Page 67
    attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Specify the model number and explain about the problem. We will advise you how to obtain service. The CE Mark is a Directive
  • Sanyo PLC-WL2500 | Owner's Manual - Page 68
    Appendix Menu Tree Computer Input/HDMI Input/Video Input Input Input Computer 1 Computer 2 HDMI Video RGB Component RGB (Scart) RGB  COMPUTER 2 can not be selected when using the COMPUTER IN 2/ MONITOR OUT terminal as MONITOR OUT output. S-video Sound
  • Sanyo PLC-WL2500 | Owner's Manual - Page 69
    Menu position Auto setup Keystone Background Display Logo Ceiling Rear Screen aspect HDMI setup Terminal Standby mode 23 languages provided. Ready Shut down Off Timer (1-30 Min) Direct on P-Timer Closed caption Lamp control Remote control On/Off Count up Count down Timer Start / Stop / Restart
  • Sanyo PLC-WL2500 | Owner's Manual - Page 70
    the dealer or the service center for service and checkup. Do not leave the projector on. It may cause an electric shock or a fire hazard. • • • green blinks green. • • • red blinks red. • • • off When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow
  • Sanyo PLC-WL2500 | Owner's Manual - Page 71
    Specifications Basically this projector SVGA 11 MAC 16 MAC 19 XGA 1 XGA 2 XGA 3 XGA 4 XGA 5 XGA 6 XGA 7 XGA 8 XGA 9 XGA 10 XGA 11 XGA 12 XGA 13 XGA 14 XGA 15 SXGA 1 SXGA 2 SXGA MAC WXGA 1 WXGA 2 WXGA 3 WXGA 4 WXGA 6 WXGA 7 WXGA 8 WXGA 9 WXGA 10 WXGA 11 WXGA 12 WUXGA 1 WUXGA 2 WSXGA+ 1 WXGA+ 1 WXGA+
  • Sanyo PLC-WL2500 | Owner's Manual - Page 72
    HDMI terminal, refer to the chart below. ON-SCREEN DISPLAY D-480p D-575p D-720p D-720p D-VGA D-SVGA D-XGA D-WXGA 1 D-WXGA 2 D-WXGA 3 D-WXGA 4 D-WXGA 5 D-WXGA 6 D-WXGA 7 D-WXGA 8 D-WXGA .95 Note: • The specifications are subject to change without the cables, turn the projector on, then select the
  • Sanyo PLC-WL2500 | Owner's Manual - Page 73
    Hz Optical Information Projection Image Size (Diagonal) Adjustable from 60" to 110" Throw Distance 2.09' - 3.94' (0.64 m - 1.20 m) Projection Lens F 1.8 lens with f 6.68 mm with manual focus Projection Lamp 230W Interface Video Input Jack RCA Type x 1 S-Video Input Jack Mini DIN
  • Sanyo PLC-WL2500 | Owner's Manual - Page 74
    Model No. SCART-VGA Cable COMPONENT-VGA Cable : POA-CA-SCART : POA-CA-COMPVGA VGA-Cable (10 m) TERMINAL COVER : KA-MC-DB10 : POA-TC-WL2500 The Terminal Panel Replacement It is recommended to attach the terminal cover to hide the unsightly cables when hanging the projector from the ceiling
  • Sanyo PLC-WL2500 | Owner's Manual - Page 75
    12 ----13 Horiz. sync. Input/Output 14 Vert. sync. Input/Output 15 ----- CONTROL PORT CONNECTOR (D-sub 9 pin) Serial 1 ----2 RXD 3 TXD 4 ----5 SG 6 ----7 ----8 ----9 ----- HDMI (19 PIN Type A) 1 3 5 7 9 11 13 15 17 19 2 4 6 8 10 12 14 16 18 1 TMDS Data 2+ Input 11 Ground (TMDS Clock) 2 Ground
  • Sanyo PLC-WL2500 | Owner's Manual - Page 76
    Code Number Memo Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service center. PIN Code Lock No. Factory default set No: 1 2 3 4* Logo PIN Code Lock No. Factory default set
  • Sanyo PLC-WL2500 | Owner's Manual - Page 77
    ) 6.56(166.7) 6.29(159.8) Appendix Unit: inch(mm) Screw Holes for Ceiling Mount Screw: M5 Depth: 0.394(10.0) 5.65(143.4) 0.70(17.9) 0.34 projector supports all commands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1. Projector Input Computer 1 Computer 2 HDMI
  • Sanyo PLC-WL2500 | Owner's Manual - Page 78
    KJ8AD
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
Multimedia Projector
MODEL
PLC-WL2500
Owner’s Manual
Network Supported
□ Wired LAN
*
Refer to the owner’s manual
below for details about network
function.
□
Network Set-up and Operation