Sanyo PLC-WM5500/L Owners Manual

Sanyo PLC-WM5500/L - 5500 Lumens Manual

Get Sanyo PLC-WM5500/L - 5500 Lumens PDF manuals and user guides View all Sanyo PLC-WM5500/L manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo PLC-WM5500/L manual content summary:

  • Sanyo PLC-WM5500/L | Owners Manual - Page 1
    Multimedia Projector MODEL PLC-WM5500 PLC-WM5500L  Projection lens is optional. Network Supported Refer to the Owner's Manual below for details about network function. □ Network Set-up and Operation Owner's Manual
  • Sanyo PLC-WM5500/L | Owners Manual - Page 2
    -driven lens shift function. This function makes it easy to provide projected image where you want. Zoom and focus can also be adjusted with a motor-driven operation. (p.17) ♦ Multiple Interface Terminals The projector has several interface terminals that can support various types of equipment and
  • Sanyo PLC-WM5500/L | Owners Manual - Page 3
    Adjustment 37 Manual PC Filter Instructions 66 Replacing the Filter Cartridge 67 Resetting the Filter Counter 68 Resetting the Scroll Counter 68 Lamp Replacement 69 Cleaning the Projection Lens 71 Cleaning the Projector Cabinet 71 Warning Indicators 72 Appendix 73 Troubleshooting
  • Sanyo PLC-WM5500/L | Owners Manual - Page 4
    of this manual. If the problem still persists, contact the dealer where you purchased the projector or the service center. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT
  • Sanyo PLC-WM5500/L | Owners Manual - Page 5
    cleaners. Use a damp cloth for cleaning. Follow all warnings and instructions marked on the projector. For added protection to the projector during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage due
  • Sanyo PLC-WM5500/L | Owners Manual - Page 6
    projector. The fans' running speed is changed according to the temperature inside the projector. IMPORTANT! Filter Maintenance!! The projector uses a lamp projector. If the projector reaches a time set in the timer setting, a Filter replacement icon (Fig. 1) appears on the screen and WARNING FILTER
  • Sanyo PLC-WM5500/L | Owners Manual - Page 7
    Safety Instructions Installing the Projector in Proper Directions Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe accident or fire hazard. This projector can project the picture in upward, downward, or inclined position in
  • Sanyo PLC-WM5500/L | Owners Manual - Page 8
    central position, and then attach the protector to protect the lens.(Only for PLC-WM5500). Protector Use the handle grip when moving the projector. Retract the adjustable feet to prevent damage to the lens and cabinet when carrying. When this projector is not in use for an extended period, put it
  • Sanyo PLC-WM5500/L | Owners Manual - Page 9
    equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Model Number Trade Name Responsible party Address Telephone No. : PLC-WM5500, PLC-WM5500L : Sanyo : SANYO fitted User Instructions
  • Sanyo PLC-WM5500/L | Owners Manual - Page 10
    Part Names and Functions Front ① ② ③ ④⑤ ⑥ Back ⑩⑪ ⑫ ⑧ ⑨⑩ ⑦ ⑬ ① Lens Release Button ② Indicators ③ Lamp Cover ④ Speaker ⑤ Lens Cap (for PLC-WM5500) ⑥ Projection Lens (for PLC-WM5500) ⑦ Lens Mount Cover (for PLC-WM5500L) ⑧ Infrared Remote Receiver (Front & Top) ⑨ Side Controls ⑩ Exhaust Vent
  • Sanyo PLC-WM5500/L | Owners Manual - Page 11
    manual of "Network Set-up and Operation"). ⑨ 5 BNC INPUT JACKS Connect the component or composite video output signal from video equipment 19-20). ③ CONTROL PORT CONNECTOR When controlling the projector with RS-232C, connect the control equipment to this connector with the serial control cable.
  • Sanyo PLC-WM5500/L | Owners Manual - Page 12
    or the filter counter reaches a time set in the timer setting, urging immediate filter/ filter cartridge replacement (pp.65, 66, 81). ⑫ SHUTTER indicator Light blue when the shutter is closed (p.79). ⑬ LAMP REPLACE indicator Light orange when the projection lamp reaches its end of life (pp.69
  • Sanyo PLC-WM5500/L | Owners Manual - Page 13
    Adjust the volume level (with Point ◄► buttons) or mute the sound (with Point ▼ button.) (p.28). ⑩ MOUSE POINTER button Move a pointer of the projector or a pointer for wireless mouse operation (p.32). ⑪ SELECT button - Execute the selected item (p.25). - Expand or compress the image in the Digital
  • Sanyo PLC-WM5500/L | Owners Manual - Page 14
    button Select the Digital zoom +/- mode and resize the image (p.43). Scroll the filter (p.30). ⑯ INPUT 1- 3 buttons Select an input source (INPUT 1 - INPUT 3) ㉓ LENS SHIFT button Select the Lens Shift function (p.29). (pp.33-35). ㉔ FREEZE button ⑰ KEYSTONE button Freeze the picture on
  • Sanyo PLC-WM5500/L | Owners Manual - Page 15
    by an incorrect type. ● Dispose of used batteries according to the instructions or your local disposal rule or guidelines. Remote Control Receivers and Operating Range Point the remote control toward the projector (to Infrared Remote Receivers) when pressing the buttons. Maximum operating range
  • Sanyo PLC-WM5500/L | Owners Manual - Page 16
    Switching the remote control codes prevents interference from other remote controls when several projectors or video equipment next to each other are operated at the same time. Change the remote control code for the projector first before changing that for the remote control. See "Remote control" in
  • Sanyo PLC-WM5500/L | Owners Manual - Page 17
    projector should be set perpendicularly to the plane of the screen. (for PLC-WM5500) Note: • The brightness in the room has a great influence on picture quality. It is recommended to limit ambient lighting in order to obtain the best display. Lens shift adjustable range When the lens is
  • Sanyo PLC-WM5500/L | Owners Manual - Page 18
    button CAUTION Be careful when handling the lens. Do not drop. Attaching the lens to the projector 1 Remove the lens mount cover. 2 Fit the lens to the projector by aligning the red dot on the lens with the red dot of the projector. 3 Slowly turn the lens clockwise until it clicks. Make sure that
  • Sanyo PLC-WM5500/L | Owners Manual - Page 19
    cable VGA cable HDMI-DVI USB cable cable G B R H/V V CONTROL PORT ANALOG OUT ANALOG IN HDMI USB Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables. • See the next page for the signals that can output to the ANALOG OUT terminal. 19
  • Sanyo PLC-WM5500/L | Owners Manual - Page 20
    RCA x 3)  • BNC cable (BNC x 1 or BNC x 3)  • S-video cable  • Scart-VGA cable • HDMI cable  Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables. Analog Out Signal Table Input Terminal RGB (PC analog) D-sub15 Input 1 RGB (SCART
  • Sanyo PLC-WM5500/L | Owners Manual - Page 21
    Connecting for Audio Signal Cables used for connection ( = Cables not supplied with this projector.) • Audio cable  Installation Audio Output Audio Output (R) (L) (R) (L) External Audio Equipment Audio Input Audio Audio cable cable (stereo) (stereo) Audio cable Audio cable (stereo) AUDIO IN
  • Sanyo PLC-WM5500/L | Owners Manual - Page 22
    sure of the type of power being supplied, consult your authorized dealer or service center. Connect the projector with all peripheral equipment before turning on the projector. CAUTION The AC outlet must be near this equipment and must be easily accessible. Note: Unplug the AC power cord when the
  • Sanyo PLC-WM5500/L | Owners Manual - Page 23
    on the projector for some time and no action is taken to replace the filter cartridge, the projector will be automatically shut down in 3 minutes after turning on to protect the projector. (pp. 66-68, 81) • When the Picture in Picture function is set to User 15, User 1-5, Input source, Lamp control
  • Sanyo PLC-WM5500/L | Owners Manual - Page 24
    of this manual and keep it on hand. Should the PIN code be missing or forgotten, consult your dealer or service center. Turning Off the Projector 1 Press LAMP LIFE. DO NOT OPERATE THE PROJECTOR CONTINUOUSLY WITHOUT REST. CONTINUOUS USE MAY RESULT IN SHORTENING THE LAMP LIFE. TURN OFF THE PROJECTOR
  • Sanyo PLC-WM5500/L | Owners Manual - Page 25
    Operation How to Operate the On-Screen Menu The projector can be adjusted or set via the On-Screen Menu into other submenus. For each adjustment and setting procedure, refer to respective sections in this manual. Side Control MENU button SELECT button 1 Press the MENU button on the side control
  • Sanyo PLC-WM5500/L | Owners Manual - Page 26
    V-sync freq., Screen, Language, Lamp status, Lamp counter, Filter counter, Power management, Key lock, PIN code lock, Shutter management, Simple mode, Remote control, and SERIAL NO. (p.29).  Network See the owner's manual of "Network Set-up and Operation".  Guide The key operation is displayed. 26
  • Sanyo PLC-WM5500/L | Owners Manual - Page 27
    Use the Point ▲▼ buttons to adjust focus of the image. Lens Shift Adjustment Display Lens shift on the screen. Use the Point buttons to position the on the projector's top lights blue when the shutter is closed. (pp.12, 79) • The projector will shut down automatically when the set time on shutter
  • Sanyo PLC-WM5500/L | Owners Manual - Page 28
    Basic Operation Sound Adjustment Direct Operation Side Control Volume Press the VOLUME+/- buttons on the side control or on the remote control to adjust the volume. The volume dialog box appears on the screen for a few seconds. Mute Press the MUTE (Point ▼) button on the remote control to select
  • Sanyo PLC-WM5500/L | Owners Manual - Page 29
    FOCUS buttons Press the FOCUS buttons on the remote control to adjust focus of the image. ZOOM buttons LENS SHIFT button FOCUS buttons Note: See the next page for the description of other buttons. INFO. may be different from the actual values. • SERIAL NO. is used to service the projector. 29
  • Sanyo PLC-WM5500/L | Owners Manual - Page 30
    than five seconds to operate electrically operated filter to replace the filter. Note: • The filter cannot be rewound. • When the filter is replaced, the total accumulated time of the filter use is automatically set to 0. Main picture PIP button User 2 of PIP (example) Press the PIP button
  • Sanyo PLC-WM5500/L | Owners Manual - Page 31
    the AUTO PC button on the remote control, correct the image manually as follows: Press the KEYSTONE button on the remote control the input signal. • Standard and Corner correction functions cannot be adjusted at the same time. If one of the fuctions is adjusted, and then the other one will be reset
  • Sanyo PLC-WM5500/L | Owners Manual - Page 32
    ). When the Pointer function is used, the wireless mouse is not available. 2 When a USB cable is connected to the computer and the projector, turn on the projector first, then the computer. If you turn on the computer first, the wireless mouse function may not operate properly. MOUSE POINTER button
  • Sanyo PLC-WM5500/L | Owners Manual - Page 33
    Input button function is set Mode 1 in the Setting menu, the INPUT button is used for switching input source. (p.51) The input source changes each time you press the INPUT button on the side control or the remote control as follows: Input 1→ Input 2→ Input 3 → ... Before using the INPUT button on
  • Sanyo PLC-WM5500/L | Owners Manual - Page 34
    Input Selection Computer Input Source Selection Menu Operation 1 Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Input and then press the Point ► or the SELECT button. 2 Use the Point ▲▼ buttons to select the desired input and then press the Point ► button
  • Sanyo PLC-WM5500/L | Owners Manual - Page 35
    . When analog RGB signal is not recognized in Y,Pb/Cb,Pr/ Cr input source, set to RGB input manually. INPUT 3 MENU WHEN SELECTING INPUT 3 (AV TERMINALS ) When connecting to video equipment, select the type of Video source in the Source Select Menu. Video When the video input signal is connected
  • Sanyo PLC-WM5500/L | Owners Manual - Page 36
    (pp.38-39). There is no signal input from the computer. Check the connection between your computer and the projector. (See "Troubleshooting" on pp.73-75.) PC System Menu Mode 1 The preset system is manually adjusted in the PC adjust Menu. The adjusted data can be stored in Mode 1-10 (pp.38-39
  • Sanyo PLC-WM5500/L | Owners Manual - Page 37
    parameters. The adjusted parameters from the Auto PC Adjustment can be stored in the projector. Once the parameters are stored, the setting can be done just by selecting Mode in PC SYSTEM Menu (p.36). See "Manual PC Adjustment" on pages 38-39. Note: • Fine sync, Total dots, Position H and Position
  • Sanyo PLC-WM5500/L | Owners Manual - Page 38
    PC Adjustment enables you to precisely adjust several parameters to match those special signal formats. The projector has 10 independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific computer. 1 Press the MENU button to display the
  • Sanyo PLC-WM5500/L | Owners Manual - Page 39
    selected when 480i, 575i, 480p, 575p, 720p, 1035i , 1080i or 1080p is selected in the PC System Menu (p.36). • When input computer signal to the projector, PC adjust function will become available. Press the MENU button to close this dialog box. Press the SELECT button to store the data. 39
  • Sanyo PLC-WM5500/L | Owners Manual - Page 40
    item and then press the SELECT button. Dynamic For viewing pictures in a bright room. Image select Menu Standard Normal picture level preset on the projector. Real Picture level with improved halftone for graphics. Image 1-10 User preset picture adjustment in the Image adjust Menu. (pp.4142) 40
  • Sanyo PLC-WM5500/L | Owners Manual - Page 41
    Computer Input Image Adjustment 1 Press the MENU button to display the On-Screen Menu. Image adjust Menu Use the Point ▲▼ buttons to select Image adjust and Contrast 32 then press the Point ► or the SELECT button. Brightness 32 Color temp. High Red 28 2 Use the Point ▲▼ buttons to
  • Sanyo PLC-WM5500/L | Owners Manual - Page 42
    1920 x 1200. If your computer's screen resolution is higher than 1920 x 1200, lower the resolution before connecting the projector. • The image data other than 1280x 800 is modified to fit the screen size in initial mode. • Full, Wide(16:9), Zoom, True and Digital zoom +/- cannot be selected when
  • Sanyo PLC-WM5500/L | Owners Manual - Page 43
    Computer Input Custom adj. Adjust the screen scale and position manually with this function. Press the Point ►button or the SELECT button at Custom adj. and Custom adj. is displayed on the screen, you can use
  • Sanyo PLC-WM5500/L | Owners Manual - Page 44
    reversed. This function is used to project the image from a ceiling-mounted projector. Rear When this function is set to On, the picture will be 16:9 projection screen. Default (16:10) ....16:10 is the aspect of the LCD panel. The orignal Screen Menu is available. 16:9 ..... Set to a 16:9 projection
  • Sanyo PLC-WM5500/L | Owners Manual - Page 45
    system, and adjusts itself to optimize its performance. When Video System is PAL-M or PAL-N, select the system manually. PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC 4.43, PAL
  • Sanyo PLC-WM5500/L | Owners Manual - Page 46
    For viewing pictures in a bright room. Standard Normal picture level preset on the projector. Natural Naturally picture level preset on the projector. Cinema Picture level adjusted with fine tone. Image 1-10 User preset picture adjustment in the Image adjust Menu. (p.48) Image select Menu 46
  • Sanyo PLC-WM5500/L | Owners Manual - Page 47
    Video Input Image Adjustment 1 Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Image adjust and then press the Point ► or the SELECT button. 2 Use the Point ▲▼ buttons select the desired item and then press the SELECT button to display the adjustment dialog
  • Sanyo PLC-WM5500/L | Owners Manual - Page 48
    scan mode. Off Progressive scan mode is Off. On Progressive scan mode is On. Film......... For watching a film. With this function, the projector reproduces pictures faithful to the original film quality. Reset To reset the adjusted data, select Reset and press the SELECT button. A confirmation
  • Sanyo PLC-WM5500/L | Owners Manual - Page 49
    its original aspect ratio. Full Provide the image to fit full screen size. Wide(16:9) Provide the image at the 16:9 wide screen screen image. Custom adj. Custom adj. Adjust the screen scale and position manually with this function. Press the Point ► button at Custom adj. and the
  • Sanyo PLC-WM5500/L | Owners Manual - Page 50
    . This function is used to project the image from a ceiling-mounted projector. Ceiling Rear When this function is set to On, the picture will :9 or projection screen. Default (16:10) ....16:10 is the aspect of the LCD panel. The orignal Screen Menu is available. 16:9 ..... Set to a 16:9 projection
  • Sanyo PLC-WM5500/L | Owners Manual - Page 51
    Input search works under the following situation: - When turning on the projector by pressing the ON/ STAND-BY button on the side control or button is set to Mode 1 or Mode 2, the status of Input and Lamp are displayed every time the signal is switched. •Only the last selected input source can be
  • Sanyo PLC-WM5500/L | Owners Manual - Page 52
    when turning on the projector. Use this function when you want to project the image as early as possible even when the lamp is not bright . . . Project a black background. It is invalid when there is no image. User . . . Project an image captured in the Logo setting. Logo (Logo and Logo
  • Sanyo PLC-WM5500/L | Owners Manual - Page 53
    function and set it to User. Then the captured image will be displayed the next time you turn on the projector. To cancel the capture function computer can be captured up to WXGA (1280 x 800). A signal from video equipment can be captured except for 720p, 1035i, 1080i and 1080p. • When capturing the
  • Sanyo PLC-WM5500/L | Owners Manual - Page 54
    -digit number. After entering the four-digit number, move the pointer to "Set". Press the SELECT button so that you can start to operate the projector. If you entered an incorrect Logo PIN code, Logo PIN code and the number will turn red for a moment. Enter the correct Logo PIN code
  • Sanyo PLC-WM5500/L | Owners Manual - Page 55
    Menu is not necessary. Note: • P by P is not available when the 4:3 function is selected in Screen aspect (p.44). • When P by P is selected in every User 1-5 and the 4:3 function is selected in Screen aspect, PIP button on the remote control is not available. To set Picture in Picture, select
  • Sanyo PLC-WM5500/L | Owners Manual - Page 56
    box appears. To delete, select Yes. Store Store the adjusted data in the User 1-5. Use the Point ▲▼ buttons to select Store and press the SELECT button of Digital RGB vary from equipment to equipment. For details, refer to the owner's manual of your Digital RGB equipment. When the black parts of
  • Sanyo PLC-WM5500/L | Owners Manual - Page 57
    Eco 2 Lower brightness and increase of fan speed. Lower brightness reduces the lamp power consumption and extends the lamp life. It is recommended to use Eco 2 when using the projector continuously over a long period of time. The fan noise becomes louder in Eco 2 than in Eco 1. Select the suitable
  • Sanyo PLC-WM5500/L | Owners Manual - Page 58
    filter is being scrolled. • The filter cannot be rewound. • When the filter is replaced, the total accumulated time of the filter use on the remote control to fit the code on the projector. • If the batteries are removed from the remote control for a long period of time, the remote control code
  • Sanyo PLC-WM5500/L | Owners Manual - Page 59
    as well as maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not operated for a do not use the projector via network. The projector's network function will stop when turning off the projector. Refer to the owner's manual of "Network Set-up
  • Sanyo PLC-WM5500/L | Owners Manual - Page 60
    Note: Be sure to turn off the projector properly (see "Turning Off the Projector" on page 24). If the projector is turned off in the incorrect sequence screen and the count starts (000:00-180:00) Count down......... The time set in the Timer setting appears on the screen and the countdown starts.
  • Sanyo PLC-WM5500/L | Owners Manual - Page 61
    or the service center. Setting PIN code lock This function prevents the projector from being operated by unauthorized persons and provides the following setting options for security. Off Unlocked. On 1 Enter the PIN code every time turning on the projector. On 2 Enter the PIN code to operate
  • Sanyo PLC-WM5500/L | Owners Manual - Page 62
    -digit number. After entering the four-digit number, move the pointer to Set. Press the SELECT button so that you can start to operate the projector. If you entered an incorrect PIN code, PIN code and the number will turn red for a moment. Enter the correct PIN code all over again
  • Sanyo PLC-WM5500/L | Owners Manual - Page 63
    Management The Shutter Management function turns off the projection lamp� when the projector is left with the shutter closed and the set time has passed away. The count-down time can be set between 5 and 480 minutes. When the count-down time has elapsed, the shutter will be opened up automatically
  • Sanyo PLC-WM5500/L | Owners Manual - Page 64
    Setting Closed caption Closed caption is a printed version of the program sound or other information displayed on the screen. If the input signal contains Closed captions, you can turn on the feature and switch the channels. Press the Point ▲▼ buttons to select Off, CC1, CC2, CC3 or CC4. If the
  • Sanyo PLC-WM5500/L | Owners Manual - Page 65
    press the Point ► or the SELECT button to access the submenu items. Filter counter...... Show the total accumulated time of the filter use timer setting. Timer To set a timer, when the projector reaches the time, the Filter replacement icon (Fig.1) appears on the screen and the total accumulated
  • Sanyo PLC-WM5500/L | Owners Manual - Page 66
    in internal heat buildup and adversely affect the life of the projector. This projector has an electrically operated filter which helps you to replace the filter easily. The projector monitors the condition of the filter at all time and replaces a filter with a new one automatically when it detects
  • Sanyo PLC-WM5500/L | Owners Manual - Page 67
    ORDER REPLACEMENT FILTER CARTRIDGE Replacement filter cartridge can be ordered through your dealer. When ordering, give the following information to the dealer. ● Model No. of your projector PLC-WM5500, PLC-WM5500L ● Replacement Filter Cartridge Type No. POA-FIL-080 (Service Parts No
  • Sanyo PLC-WM5500/L | Owners Manual - Page 68
    Use the Point ▲▼ buttons to select Setting and then press the Point ► or the SELECT button. Scroll counter 2 Use the Point ▲▼ buttons to select Filter counter and then press the SELECT button. Use the Point ▲▼ buttons to select Scroll counter reset and then press the SELECT button. Scroll counter
  • Sanyo PLC-WM5500/L | Owners Manual - Page 69
    of the projector reaches its end of life,�t�h���e���L���a��m����p���r��e��p���l�a��c��e���m���e���n��t��i�c���o��n����a��p��p���e��a���r�s���o���n���t�h�e��s�c�r�e�e�n��a�n�d� LAMP REPLACE indicator lights orange. Replace the lamp with a new one promptly. The timing when the LAMP REPLACE indicator
  • Sanyo PLC-WM5500/L | Owners Manual - Page 70
    of broken glass. ORDER REPLACEMENT LAMP Replacement lamp can be ordered through your dealer. When ordering, give the following information to the dealer. ● Model No. of your projector : PLC-WM5500, PLC-WM5500L ● Replacement Lamp Type No. : POA-LMP136 (Service Parts No. 610 346 9607
  • Sanyo PLC-WM5500/L | Owners Manual - Page 71
    the surface of the lens. Cleaning the Projector Cabinet Unplug the AC power cord before cleaning. Gently wipe the projector body with a soft AC power cord is unplugged because the temperature inside the projector is extremely high due to the lamps. In addition, there is a risk that the internal
  • Sanyo PLC-WM5500/L | Owners Manual - Page 72
    been installed near an Air-Conditioning/ Heating Duct or Vent? Move the installation of the projector away from the duct or vent. - Is the filter clean? Replace the filter with a new one. The projector is shut down and the LAMP indicator is lighting and other indicators are blinking. When the
  • Sanyo PLC-WM5500/L | Owners Manual - Page 73
    Troubleshooting Before calling your dealer or service center for assistance, check the items below once again. 1. Make sure you have properly connected the projector to peripheral equipment as described on pages 19-21. 2. Check the cable connection. Make sure that all computers, video equipment
  • Sanyo PLC-WM5500/L | Owners Manual - Page 74
    is out of scroll. Replace the filter cartridge with a new one promptly. (See pages 67-68) appears on the screen The image is out of focus. - Adjust the focus of the projector. - Check Projection Lens to see if it needs cleaning. Note: M oving the projector from a cool temperature location to
  • Sanyo PLC-WM5500/L | Owners Manual - Page 75
    center. WARNING: High voltages are used to operate this projector. Do not attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Specify the model number and explain about the
  • Sanyo PLC-WM5500/L | Owners Manual - Page 76
    Sound Sound Information Information Volume Built-in SP Mute 0-63 On/Off On/Off Input H-sync freq. V-sync freq. Screen Language Lamp status Lamp counter Filter counter Power management Key lock PIN code lock Shutter management Simple mode Remote control SERIAL NO. Computer Input System (1) Mode
  • Sanyo PLC-WM5500/L | Owners Manual - Page 77
    Appendix Screen Screen Normal Full Wide(16:9) Zoom True Custom Custom adj. Digital zoom + Digital zoom Keystone Ceiling Rear Screen aspect Reset Scale H & V Position Common Reset H / V On/Off H / V Store Reset On/Off On/Off Default(16:10)/16:9/4:3 Video Input System (2) System (3) Auto PAL
  • Sanyo PLC-WM5500/L | Owners Manual - Page 78
    On/Countdown Off/Off Background Blue/User/Black Logo Picture in Picture Logo select User Default Off Capture Yes/No Logo PIN code lock Logo PIN code change Off/On HDMI setup Image Sound Lamp control Filter control Lamp control Auto/Normal/Eco 1/Eco 2 Lamp life control Yes/No Mode 1/Mode
  • Sanyo PLC-WM5500/L | Owners Manual - Page 79
    Condition Check the indicators for the projector condition. The projector is operating normally. POWER green LAMP red Indicators WARNING TEMP. WARNING FILTER SHUTTER LAMP REPLACE red orange blue orange Projector Condition The projector is off. (The AC power cord is unplugged.) The
  • Sanyo PLC-WM5500/L | Owners Manual - Page 80
    been cooled down ❖  enough and the projector is in stand-by mode and ready to be turned on with the ON/STAND-BY button.)    The lamp has been used overtime. Replace the lamp immediately. WARNING FILTER When the filter detects clogging, reaches a time set in the timer setting or runs
  • Sanyo PLC-WM5500/L | Owners Manual - Page 81
    condition. POWER green LAMP red Indicators WARNING TEMP. WARNING FILTER SHUTTER LAMP REPLACE red orange blue orange Projector Condition   Fig.2 Filter replacement icon Fig.3 Fig.4 Filter cartridge replacement icon ❖   If the Filter counter reached a time set in the timer
  • Sanyo PLC-WM5500/L | Owners Manual - Page 82
    Appendix 82 Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V- and H-Frequency mentioned below and less than 140 MHz of Dot Clock. When the input signal
  • Sanyo PLC-WM5500/L | Owners Manual - Page 83
    when signals other than above are inputted, however the functions of the projector could be limited. •Depending on your PC settings, the digital signals PC settings. •When you project a DVI signal, connect the cables, turn the projector on, then select the input. Finally, turn on your PC. Be sure to
  • Sanyo PLC-WM5500/L | Owners Manual - Page 84
    batteries) Lens Cap (for PLC-WM5500) Lens Mount Cover (for PLC-WM5500L) Lens Antitheft screw * VGA Cable * Contact the dealer where you purchased the projector or the service center about the Lens Antitheft Screw. ● The specifications are subject to change without notice. ● LCD panels are
  • Sanyo PLC-WM5500/L | Owners Manual - Page 85
    It may cause serious damage to the projector. To the sales and service engineers: For the lens replacement and lens installation, refer to the installation manual of the optional lens. Before replacing and installing the lens, make sure that you are using the lens with the correct Type No. PJ Link
  • Sanyo PLC-WM5500/L | Owners Manual - Page 86
    Appendix Configurations of Terminals ANALOG/ ANALOG OUT (Mini D-sub 15 pin) 54 32 1 10 9 8 7 6 15 14 13 12 11 Input 1 Red Input 2 Green Input 3 Blue Input 4 No Connect 5 Ground (Horiz.sync.) 6 Ground (Red) 7 Ground (Green) 8 Ground (Blue) HDMI (19 Pin Type A) Output 1 Red Output 2 Green Output
  • Sanyo PLC-WM5500/L | Owners Manual - Page 87
    Code Number Memo Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service center. PIN Code Lock No. Factory default set No: 1 2 3 4* Logo PIN Code Lock No. Factory default set
  • Sanyo PLC-WM5500/L | Owners Manual - Page 88
    Appendix Dimensions 16.39(416.2) Unit: inch (mm) Screw Holes for Ceiling Mount Screw: M6 Depth: 0.393 (10.0) 3.31(84.0) 7.25(184.2) 4.34(110.3) 4° 19.27(489.5) 3.80(96.6) 7.70(195.5) 6.89(175.0) 2.95(75.0) 13.58(344.9) 14.61(371.1) 17.12(434.8) 6.30(160.0) 1.18(30.0) 3.34(84.7) 9.20(233
  • Sanyo PLC-WM5500/L | Owners Manual - Page 89
    rate). Baud rate Parity check Stop bit Flow control Data bit : 9600 / 19200 bps : none : 1 : none : 8 3 Type the command for controlling the projector and then enter the "Enter" key. Example When you want to change the input to INPUT 2, Type 'C' '0' '6' 'Enter'. Note: Enter with ASCII 64
  • Sanyo PLC-WM5500/L | Owners Manual - Page 90
    C24 C25 C28 C29 C33 C34 C35 Function Turn the projector ON Turn the projector OFF (immediately OFF) Turn the projector OFF Select Input 1 Select Input 2 Select Input 3 1 Analog RGB Select Input 1 SCART Lens shift UP Lens shift DOWN Lens shift LEFT Lens shift RIGHT Auto PC adj. Keystone UP Keystone DOWN
  • Sanyo PLC-WM5500/L | Owners Manual - Page 91
    anomaly Cooling down at Power Management mode Power Management mode after Cooling down Cooling down after the projector is turned off when the lamps are out. Stand-by mode after Cooling down when the lamps are out. Stand-by mode after Cooling down at the temperature anomaly. Cooling down when the
  • Sanyo PLC-WM5500/L | Owners Manual - Page 92
    KK8AL
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
Owner’s Manual
Projection lens is optional.
Multimedia Projector
MODEL
PLC-WM5500
PLC-WM5500L
Network Supported
Refer to the Owner's Manual below for
details about network function.
□
Network Set-up and Operation