Sanyo PLC-WM5500/L RS232C Basic

Sanyo PLC-WM5500/L - 5500 Lumens Manual

Get Sanyo PLC-WM5500/L - 5500 Lumens PDF manuals and user guides View all Sanyo PLC-WM5500/L manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo PLC-WM5500/L manual content summary:

  • Sanyo PLC-WM5500/L | RS232C Basic - Page 1
    BASIC SERIAL COMMAND FUNCTIONAL SPECIFICATIONS PLC-WM5500 PLC-WM5500L Ver.1.00 SANYO Electric Co., Ltd DS Company Projector Division
  • Sanyo PLC-WM5500/L | RS232C Basic - Page 2
    PLC-WM5500/WM5500L Basic Serial Command Functional Specifications Contents 1. Overview...5 2. Serial Interface Specification 5 2.1. Transfer Specification 5 2.2. Connection ...5 3. Notes for Communication 6 4. Functional Execution Command Table 7 5. Status Read Command Table 9 6. Functional
  • Sanyo PLC-WM5500/L | RS232C Basic - Page 3
    PLC-WM5500/WM5500L Basic Serial Command INPUT 1 SCART Command 20 6.53 LENS SHIFT UP Command 20 6.54 LENS SHIFT DOWN Command 20 6.55 LENS SHIFT LEFT Command 20 6.56 LENS SHIFT RIGHT Command 20 6.57 7.5 Input Mode Read Command 27 7.6 Lamp Time Read Command 27 7.7 Setting Read Command 27 3/28
  • Sanyo PLC-WM5500/L | RS232C Basic - Page 4
    PLC-WM5500/WM5500L Basic Serial Command Functional Specifications 7.8 Temp Read Command 28 7.9 Lamp Mode Read Command 28 4/28
  • Sanyo PLC-WM5500/L | RS232C Basic - Page 5
    PLC-WM5500/WM5500L Basic Serial Command Functional Specifications 1. Overview These specifications define projector control commands for PLC-WM5500/WM5500 L The projector control commands are used to control a projector through RS-232C from a computer. 2. Serial Interface Specification 2.1.
  • Sanyo PLC-WM5500/L | RS232C Basic - Page 6
    PLC-WM5500/WM5500L Basic Serial Command Functional Specifications 3. Notes for Communication The projector time after receiving return value. 1) Commands "VOLUME +/-", "ZOOM UP/DOWN", "FOCUS UP/DOWN" and "LENS when the command for internal initialization or lamp lighting is received, ACK value is
  • Sanyo PLC-WM5500/L | RS232C Basic - Page 7
    PLC-WM5500/WM5500L Basic Serial Command Functional Specifications 4. Functional Execution Command Table Command C00 C01 C02 C03 C04 C05 C06 C07 C08 C09 C0A C0B C0C C0D C0E
  • Sanyo PLC-WM5500/L | RS232C Basic - Page 8
    PLC-WM5500/WM5500L Basic Serial Command Functional Specifications Command C40 C41 C42 C43 C44 C45 C46 C47 C48 C49 C4A C4B C4C C4D C4E C4F C50 C51 C52
  • Sanyo PLC-WM5500/L | RS232C Basic - Page 9
    PLC-WM5500/WM5500L Basic Serial Command Functional Specifications 5. Status Read Command Table Command CR0 Item STATUS READ CR1 CR2 INPUT MODE READ --- CR3 CR4 LAMP TIME READ SETTING READ CR5 CR6 CR7 --TEMP READ LAMP MODE READ CR8 --- CR9 --- CRA --- CRB --- CRC --- "---" means "
  • Sanyo PLC-WM5500/L | RS232C Basic - Page 10
    PLC-WM5500/WM5500L Basic Serial Command Functional Specifications 6. Functional Execution Command 6.1 Format PC issues a command in the following format: "C" Command [CR] Command: two characters (See Functional Execution Command Table) Projector decodes the received data and returns the result when
  • Sanyo PLC-WM5500/L | RS232C Basic - Page 11
    PLC-WM5500/WM5500L Basic Serial Command Functional Specifications 6.4 Operation Requirements 6.4.1 In the following status of projector, Available Functional Execution Commands are limited. Projector Status Available Functional Execution Commands Standby Mode Countdown in process C00: POWER ON
  • Sanyo PLC-WM5500/L | RS232C Basic - Page 12
    PLC-WM5500/WM5500L Basic Serial Command Functional Specifications 6.5 POWER ON Command Command "C00 Standby) This command works the same way as when Power is OFF with ON/STAND-BY button of the projector and remote control. (When the command is sent once, "Power OFF?" message is displayed. If this
  • Sanyo PLC-WM5500/L | RS232C Basic - Page 13
    PLC-WM5500/WM5500L Basic Serial Command Functional Specifications 6.10 INPUT 3 Command Command " selected, this command does not execute the source switching; just for switching to Input 3. Although projector returns "OK", Input search is not executed with this command while Input button is set to
  • Sanyo PLC-WM5500/L | RS232C Basic - Page 14
    PLC-WM5500/WM5500L Basic Serial Command Functional Specifications 6.15 SOUND MUTE OFF Command Command "C0C" [CR] Detail Sound Mute Off. This command works the same way as "MUTE"
  • Sanyo PLC-WM5500/L | RS232C Basic - Page 15
    PLC-WM5500/WM5500L Basic Serial Command Functional Specifications 6.21 MENU OFF Command Command "C1D" [ to user control. Acceptable Response [ACK] [CR] Unacceptable "?" [CR] 6.25 INPUT 2 VIDEO Command Command "C23" [CR] Detail Select Video input in Input 2. Although projector returns
  • Sanyo PLC-WM5500/L | RS232C Basic - Page 16
    PLC-WM5500/WM5500L Basic Serial Command Functional Specifications 6.27 INPUT 2 RGB Command Command "C25" [CR] Detail Select RGB input in Input 2. Although projector returns "OK", Input search is not executed with this command while Input button is set to Mode2 or Mode3. Acceptable Response [
  • Sanyo PLC-WM5500/L | RS232C Basic - Page 17
    PLC-WM5500/WM5500L Basic Serial Command Functional Specifications 6.33 POWER MANAGEMENT Cb,Pr/Cr Command Command "C35" [CR] Detail Select Y,Pb/Cb,Pr/Cr input in Input 3. Although projector returns "OK", Input search is not executed with this command while Input button is set to Mode2 or Mode3
  • Sanyo PLC-WM5500/L | RS232C Basic - Page 18
    PLC-WM5500/WM5500L Basic Serial Command Functional Specifications 6.39 POINTER RIGHT Command Command "C3A" [CR] Detail Move the Pointer of On-Screen Display Menu to the right. This command works differently from the command by Point button ">" of the projector or remote control and has no "
  • Sanyo PLC-WM5500/L | RS232C Basic - Page 19
    PLC-WM5500/WM5500L [CR] Detail Adjust on-screen focus by making focal length longer. (The lens moves backward) This command works the same way as "FOCUS ▲" button of C4F" [CR] Detail Select HDMI input in Input 1. Although projector returns "OK", Input search is not executed with this command while
  • Sanyo PLC-WM5500/L | RS232C Basic - Page 20
    PLC-WM5500/WM5500L Basic Serial Command Functional Specifications 6.51 INPUT 1 ANALOG RGB Command Command "C50" [CR] Detail Select Analog RGB input in Input 1. Although projector Response [ACK] [CR] Unacceptable "?" [CR] 6.53 LENS SHIFT UP Command Command "C5D" [CR] Detail Move projection
  • Sanyo PLC-WM5500/L | RS232C Basic - Page 21
    PLC-WM5500/WM5500L Basic Serial Command Functional Specifications 6.57 AUTO PC ADJ. Command Command "C89" [CR] Detail Execute AUTO PC ADJ. function This command works the same way
  • Sanyo PLC-WM5500/L | RS232C Basic - Page 22
    PLC-WM5500/WM5500L Basic Serial Command Functional Specifications 6.62 KEYSTONE → Command Command "C90" [CR] Detail Correct keystone distortion by reducing right side of image. This command invokes both
  • Sanyo PLC-WM5500/L | RS232C Basic - Page 23
    PLC-WM5500/WM5500L Basic Serial Command Functional Specifications 7 Status Read Command 7.1 Format PC issues a command in the following format. "CR" Command [CR] Command: one character (See Status Read Command Table) When projector receives an appropriate command, it returns the required data in
  • Sanyo PLC-WM5500/L | RS232C Basic - Page 24
    PLC-WM5500/WM5500L Basic Serial Command Functional Specifications 7.4 Status Read Command Command "CR0" [CR] Detail Get the projector time depends on models.) This function is intended to cool down lamps and other optical parts, and is quite important for projector's reliability. During this time
  • Sanyo PLC-WM5500/L | RS232C Basic - Page 25
    PLC-WM5500/WM5500L Basic Serial Command Functional Specifications "10" [CR] Status: Power Failure When the power supply voltage inside the projector reaches abnormal status, the projector is automatically turned off. Abnormal power supply voltage includes; Filter . During this time, any Functional
  • Sanyo PLC-WM5500/L | RS232C Basic - Page 26
    PLC-WM5500/WM5500L Basic Serial Command Functional Specifications "04" [CR] Status: Power Save This indicates it moves to Power-Save status by Power Management function as set in the Setting menu. "21" [CR] Status: Cooling Down in process after OFF due to Lamp Failure When the projector is turned
  • Sanyo PLC-WM5500/L | RS232C Basic - Page 27
    PLC-WM5500/WM5500L Basic Serial Command Functional Specifications 7.5 Input Mode Read Command Lamp Time Read Command Command "CR3" [CR] Detail Get total lamp running hours. *return lamp operating time multiplied by the given coefficient (not actual used time) Acceptable "%1" [CR] Display Lamp
  • Sanyo PLC-WM5500/L | RS232C Basic - Page 28
    PLC-WM5500/WM5500L Basic Serial Command Functional Specifications 7.8 Temp Read Command Command "CR6" [CR] Detail Get the information of temperature inside a projector hardware problems, it %3 starts with "E" like"E00.0" [CR]. With several built-in temperature sensors, the projector returns
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
BASIC SERIAL COMMAND
FUNCTIONAL SPECIFICATIONS
PLC-WM5500
PLC-WM5500L
Ver.1.00
SANYO Electric Co., Ltd
DS Company
Projector Division