Sanyo PLC-WM5500/L RS232C Expand

Sanyo PLC-WM5500/L - 5500 Lumens Manual

Get Sanyo PLC-WM5500/L - 5500 Lumens PDF manuals and user guides View all Sanyo PLC-WM5500/L manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo PLC-WM5500/L manual content summary:

  • Sanyo PLC-WM5500/L | RS232C Expand - Page 1
    EXPAND SERIAL COMMAND FUNCTIONAL SPECIFICATIONS PLC-WM5500 PLC-WM5500L Ver.1.00 SANYO Electric Co., Ltd DS Company Projector Division
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 2
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications Contents 1 Overview ...9 2 Serial Interface Specification 9 2.1 Input Status Read Command Table 14 6.5 Screen Status Read Command Table 15 6.6 Lamp Status Read Command Table 15 6.7 Sound Status Read Command Table 15 6.8 Setting
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 3
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 8.4.9 8.4.10 8.4.11 8.4.12 8.4.13 8.5 8.5.1 8.5.2 8.5.3 8.5.4 8.5.5 8.5.6 8.5.7 8.5.8 8.5.9 8.5.10 8.5.11 8.6 8.6.1 8.6.2 8.6.3 8.6.4 8.6.5 8.6.6 8.6.7 8.7 8.7.1 8.7.2 8.7.3 8.7.4 8.7.5 8.7.6 8.7.7 8.7.8 8.7.9 8.7.10 8.7.11 8.7.12
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 4
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 8.7.15 CF_REAR Command 37 8.7.16 CF_SCREENASPECT Command 37 8.8 Lamp Command ...38 8.8.1 CF_LAMPMODE Command 38 8.8.2 CF_LAMPLIFECONTRL_ Command 38 8.9 Sound Command 39 8.9.1 CF_VOLUME Command 39 8.9.2 CF_MUTE Command 39 8.9.3
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 5
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 8.10.31 CF_POINTER Command 49 8.10.32 CF_PTIMEMODE Command 49 8.10.33 CF_PTIMER Command 49 8.10.34 CF_PTIME Command 49 8.
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 6
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 9.4.16 9.4.17 9.5 9.5.1 9.5.2 9.5.3 9.5.4 9.5.5 9.5.6 9.5.7 9.5.8 9.5.9 9.5.10 9.6 9.6.1 9.7 9.7.1 9.7.2 9.7.3 9.7.4 9.7.5 9.7.6 9.7.7 9.7.8 9.7.9 9.7.10 9.7.11 9.7.12 9.7.13 9.7.14 9.7.15 9.7.16 9.7.17 9.7.18 9.8 9.8.1 9.8.2 9.8.3
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 7
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 9.8.6 CR_ KYSTNMODE Command 71 9.8.7 CR_CORNERTESTPAT Command 71 9.8.8 CR_CEIL Command 71 9.8.9 CR_REAR Command 71 9.8.10 CR_SCREENASPECT Command 71 9.9 Lamp Status Read Command 72 9.9.1 CR_LAMPREPL Command 72 9.9.2 CR_LAMPH
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 8
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 9.11.22 CR_SIMPLEMODE Command 80 9.11.23 CR_RCODE Command 80 9.11.24 CR_RSENS Command 80 9.11.25 CR_RTYPE Command 80 9.
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 9
    with PJ-Net organizer for PLC-WM5500 / WM5500L. Supporting Firmware Ver. 1.x of the projector. Commands in this document are be changed in Service mode. 2.2 Connection Dedicated serial cables must be used for the connection between a computer and a projector. PC Projector COM 1 CONTROL
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 10
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 3 Notes for communication command pipelining, allow the interval time of no less than100ms after receiving return value. (No less than 100 ms) Command PC Projector "CF_BRIGHT_032" CR Next command Projector PC "000" CR Return
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 11
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 5 Functional Execution Command Table 5.1 Image Command Table Execute command CF_BRIGHT_%1 [CR] CF_CONT_%1 [CR] CF_COLOR_%1 [CR] CF_TINT_%1 [CR] CF_SHARP_%1 [CR] CF_GAMMA_%1 [
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 12
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 5.4 Screen Control Command Table Execute command User %1 and return to state of Free. Reset setting of "Picture in Picture" Set Image mode of HDMI menu. Set Sound mode of HDMI menu. Reset Filter used time Set time to display Filter
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 13
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications CF_FILSCRL_%1[CR] CF_TESTPAT_%1[CR] CF_FDEFAULT_%1 [CR] Reset Filter scroll counter Set level of Fan down in P-timer function Set the status of P-timer Set the time for count down mode in P-timer function Prohibit RC/KEY control
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 14
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 6 Status Read Command Table 6.1 Image Status Read Command Table Status Read command CR_BRIGHT [CR] CR_CONT [CR] CR_COLOR [CR] CR_TINT [CR]
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 15
    PLC-WM5500/WM5500L Lamp replacement time Get information of actual Lamp running time Get lamp running time multiplied by a coefficient Get selected Lamp mode Get status of the Lamp Get total running time of projector Get the total number of lamps Get selected mode in Lamp life Filter scroll 15/88
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 16
    PLC-WM5500/WM5500L filter clog Get status of Filter cleaning / replacement time Get selected Fan Control Speed Get selected mode in Simple mode function Get selected Remote Control code Get selected location of infrared remote receiver of remote control Get supported status of Projector Get status
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 17
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 7 Error Code Table Error Code ? 000 101 Contents -When the received data cannot be decoded -Parameter designation error (wrong digit
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 18
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 8 Functional Execution Projector Status Standby Mode Countdown in process Cooling Down in process Cooling Down due to Abnormal Temperature Abnormal Temperature Power Failure (60 seconds after Power failure occurred) Abnormal Filter
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 19
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 8.4 Image Command 8.4.1 CF_ BRIGHT Color by 1 Details Set user controlled value of Color (Available only in the normal Power ON status) The value set by this command will not be stored in the projector's memory. Therefore, when
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 20
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 8.4.5 CF_SHARP Command Command "CF_SHARP_%1" [CR] "000-031 Directly specify setting value of Sharpness %1 "UP Increment setting value of Sharpness by 1 "DN Decrement setting value of Sharpness by 1 Details Response Set user
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 21
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 8.4.8 CF_COLTEMP Command Command "CF_COLTEMP_%1" [CR] "000 Xlow %1 "001 Low "002 Mid "003 High Details Response Set Color Temperature The value set by this command will not be stored in the projector's memory. Therefore,
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 22
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 8.4.11 CF_PROGV Command Command "CF_PROGV_%1" by user Details Response Select Image Mode (Available only in the normal Power ON status) Parameter "CUSTOM1" to "CUSTOM10" corresponds to "Image1" to "Image10" displayed in projector
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 23
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 8.4.13 CF_IMAGEADJ Command Command " only in the normal Power ON status) "STR1"-"STR10" corresponds to "Image1"-"Image10" displayed in projector OSD menu on selecting "Store" for adjusted value of Image. The setting value set in
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 24
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 8.5 PC Adjust Control Command 8.5.1 CF_FSYNC in the normal Power ON status) The value set by this command will not be stored in the projector's memory. Therefore, when the power is turned to ALL OFF status, the value returns to the
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 25
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 8.5.4 CF_H-POS Command Command "CF_H-POS_%1" [CR the normal Power ON status) The value set by this command will not be stored in the projector's memory. Therefore, when the power is turned to ALL OFF status, the value returns to the
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 26
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 8.5.7 CF_DLINE Command Command "CF_DLINE_%1" [ the normal Power ON status) The value set by this command will not be stored in the projector's memory. Therefore, when the power is turned to ALL OFF status, the value returns to the
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 27
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 8.5.9 CF_ORGMODE Command Command "CF_ORGMODE_%1" [CR] signal originated with by issuing this command. This command is used to specify projector internal settings such as whether or not to get PC signal through IP (Available only
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 28
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 8.5.11 CF_PCMODEFREE Command Command "CF_PCMODEFREE_%1" [CR] "1 Set Mode1 to Free status "2 Set Mode2 to Free status "3 Set Mode3 to Free
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 29
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 8.6 Input Control Command 8.6.1 CF_INPUT Command Command "CF_INPUT_ button of Projector or Remote Control. *When selecting Input4 on a projector with PJ-Net unattached, it comes to "103". *When selecting Input4on a projector with
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 30
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 8.6.3 CF_INPUT 1 Command Command "CF_INPUT1_%1" [CR] "ANALOG Select PC Analog Input %1 "SCART Select SCART Input "HDMI Select HDMI Input Details Select
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 31
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 8.6.7 CF_SYSTEM Command Command "CF_SYSTEM_%1" [CR] Input is PC Analog "VGA1 Select VGA1 "VGA2 Select VGA2 : : "XGA1 Select XGA1 : : "WXGA3 Select
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 32
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 8.7 Screen Control Command 8.7.1 CF_SCREEN Command Command "CF_SCREEN_%1" [CR] "NORMAL Select Normal mode "FULL Select Full screen mode "WIDE Select Wide(
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 33
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 8.7.3 CF_VSCALE Command Command "CF_VSCALE_%1" [CR] "035 35 mode is not in "Custom", projector changes image mode into Custom by receiving this command. *When there is no signal detected, projector returns 101 and the command does
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 34
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 8.7.5 CF_HSCALE Command Command "CF_HSCALE_%1" [CR] "035 35 mode is not in "Custom", projector changes image mode into Custom by receiving this command. *When there is no signal detected, projector returns 101 and the command does
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 35
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 8.7.7 CF_KEYSTONE Command Command "CF_KEYSTONE _%1" the normal Power ON status). When reached the limit of the correction level, projector accepts the command but does not execute it. Receiving this command immediately invokes the
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 36
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 8.7.10 CF_CORNER-UR Command Command Available in normal Power ON status only) The correction starts with the first command received Projector returns error code ""101 and no operation is made when exceeding the correction limit,
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 37
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 8.7.13 CF_CORNERTESTPAT Command Command "CF_CORNERTESTPAT_%1"[CR] "RED Select Red %1 "WHITE" -------- Select White "BLUE Select Blue "OFF Select Off Details Display
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 38
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 8.8 Lamp Command 8.8.1 CF_LAMPMODE Command Command "CF_LAMPMODE_%1" [CR] "NORMAL Set Lamp status to Normal mode %1 "ECO1 Set Lamp status to Eco1 mode "ECO2 Set Lamp status to Eco2 mode "AUTO Set Lamp status to Auto mode
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 39
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 8.9 Sound Command 8.9.1 CF_VOLUME Command status is canceled just like RC operation. The value set by this command is stored in Projector's memory. * When input signal is Network, error code "101" is returned. Acceptable Response
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 40
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 8.10 Setting Command 8.10.1 CF_LANG Command Command "CF_LANG_%1" [CR] "ENG Select ENGLISH "DEU Select German "FRA Select French "ITA Select
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 41
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 8.10.4 CF_DISP Command Command " in EEPROM and the setting remains even after the power is turned to ALL OFF status. *When 1="USER" is received, error code "101" is returned, in the case of Capture non-practice. Acceptable Response
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 42
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 8.10.6 CF_LOGO Command Command "CF_LOGO_%1_%2" [CR] %1 "0000 - 9999 Directly set Logo PIN code "OFF Cancel Logo display "DFLT Select Logo of Factory Default "USER Select User %2 "UP Select functions to choose forward (
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 43
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 8.10.9 CF_PIPMAININP Command Command "CF_PIPMAININP_%1_%2" [CR] "1 Select Input 1 %1 "2 Select Input 2 "3 Select Input 3 "ANALOG Select Analog Input "VIDEO Select Composite
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 44
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 8.10.12 User 1 "USER2"---- Store current setting status to User 2 %1 "USER3"---- Store current setting status to User 3 "USER4"---- Store current setting status to User 4 "USER5"---- Store current setting status to User
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 45
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 8.10.15 CF_PIPMODEFREE Command Command "CF_PIPMODEFREE_%1" [CR] "USER1 Set User1 to Free status "USER 2 Set User2 to Free status %1 "USER 3 Set User3 to Free status "USER 4 Set User4 to Free status "USER 5 Set User5 to
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 46
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 8.10.19 CF_FILH Command Command "CF_FILH_%1" [CR] %1 "RST Reset Filter used time Details Reset used time for filter of projector Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.10.20 CF_FILTIMER Command
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 47
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 8. projector "BACKTOP Select only back and top receivers of projector "FRONTBACK Select only front and back receivers of projector "FRONT Select only front receiver of projector %1 "TOP Select only top receiver of projector
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 48
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 8.10.27 CF_P-MANE "DN Decrement value by 1 (Switched in 30→29→ --- → 01 → 30 order) Details Set time of Power Management time (Available only in the normal Power ON status) The status set by this command is stored in EEPROM
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 49
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 8.10.31 CF_POINTER Command Command CF_PTIME Command Command "CF_PTIME_%1" [CR] %1 "001" - "180 Directly specify setting time Details Set the time for Count down mode of P-timer. (Available only in the normal Power ON status)
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 50
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 8.10.35 CF_KEYDIS Command Command " completed. When PIN code lock is set to "On1", it needs to send this command every time the projector is turned on. Acceptable "000" [CR] Unacceptable "Error Code" [CR] 8.10.37 CF_SHUTRCPROT
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 51
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 8.10.39 CF_SHUTH Command Command "CF_SHUTH_%1" [CR] "005"-"480"----------Specify setting time directly %1 "UP Add 1 minute "DN Decrease 1 minute Details Set time of operating shutter management function. (Valid only when in
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 52
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 8.10.42 CF_DELAYCTRL Command Command "CF_DELAYCTRL_%1" [CR] "OFF"---------- Set Video delay control to OFF %1 "LOW"---------- Set Video delay control to
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 53
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 8.11 Other Commands 8.11.1 CF_KEYEMU Command of Projector. Once Auto PC adj. is started with "AUTOPC" command, it does not stop with receiving the command another time. *When transmit command of CF_KEYEMU parameter - When User menu
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 54
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 8.11.3 CF_POWER Command Command "CF_POWER_%1" [CR] "ON Power ON "OFF Power OFF * Issuing another command during countdown process forced countdown operation to be terminated. %1 * Error Code is returned in some projector
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 55
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 9 Status Read Command 9.1 Format 1) PC issues commands in format as below: "CR_ COMMAND" [CR] Command: String 2) When projector Command "CR_BRIGHT" [CR] Details Get user controlled value of Brightness Acceptable Response %1
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 56
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 9.4.4 CR_TINT Command Command "CR_TINT" [CR] Details Get user controlled value of Tint Acceptable "000_%1" [CR] Response %1 Unacceptable "000 - 063" "Error Code" [CR] --- When command is not available in the given condition (
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 57
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 9.4.9 CR_WBAL-B Command Command "CR_WBAL-B" [CR] Details Get user controlled Blue value of White Balance Acceptable Response %1 "000_%1" [CR] "000 - 063" Unacceptable "Error Code" [CR] 9.4.10 CR_COLTEMP Command Command "
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 58
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 9.4.14 CR_NZRED Command Command "CR_NZRED" [CR] Details Get Noise Reduction setting status Acceptable "000_%1" [CR] Response %1 "OFF Cancel Noise Reduction "
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 59
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 9.5 PC Adjust Status Read Command 9.5.1 CR_FSYNC Command Command "CR_FSYNC" [CR] Details Get value of Fine Sync Acceptable "000_%1" [CR] Response %1
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 60
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 9.5.5 CR_V-POS Command Command "CR_V-POS" [CR] Details Get value of Vertical Position Acceptable "000_%1" [CR] Response %1 Unacceptable "0000 - nnnn" (
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 61
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 9.5.8 CR_ORGMODE Command Command "CR_ORGMODE" [CR] Details Get the original signal of current selected Mode that is set in PC Adj.
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 62
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 9.5.9 CR_PCSTORE Command Command "CR_PCSTORE" [CR] Details Get Free or Stored status of MODE1 - 10 in PC Adjust. Data consists of
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 63
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 9.6 Video Status Read Command 9.6.1 CR_SERSYS Command Command "CR_SERSYS" [CR] Details Get selected current signal. Auto detected signal is returned in
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 64
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 9.7 Input Read Command 9.7.1 CR_INPUT Command Command "CR_INPUT" [CR] Details Get selected INPUT No. Acceptable Response %1 "000_%1" [CR] "1 - 4" Unacceptable "Error Code" [
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 65
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 9.7.5 CR_SRCINP3 Command Command "CR_SRCINP3" [CR] Details Get Source of INPUT3 Acceptable "000_%1" [CR] "VIDEO in Video mode Response %1 "S-VIDEO in S-
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 66
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 9.7.7 CR_SYSTEM Command Command "CR_SYSTEM" [CR] Details Get selected System Acceptable "000_%1" [CR] Input is PC Analog "VGA1 indicates VGA1 is
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 67
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 9.7.8 CR_SYSLIST Command Command "CR_SYSLIST" [CR] Details Get possible systems for System list Acceptable "000_%1_%2_---_%x" [CR] Error Code "101"
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 68
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 9.7.10 CR_HMSLOT Command Command "CR_HMSLOT" [CR] Details Get the attached and the power OFF, error code "101" is returned. *In models not supporting PJ-Net, error code "103" is returned. Unacceptable "Error Code" [CR] 68/88
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 69
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 9.7.15 CR_IDSLOT1 Command Command "CR_IDSLOT1" [CR] Details PJ-Net attached and the power OFF, error code "101" is returned. *In models not supporting PJ-Net, error code "103" is returned. Unacceptable "Error Code" [CR] 69/88
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 70
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 9.8 Screen Status Read Command 9.8.1 CR_SCREEN Command Command "CR_SCREEN" [CR] Details Get selected screen image size Acceptable "000_%1" [CR] Response "NORMAL
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 71
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 9.8.6 CR_ KYSTNMODE Command Command "CR_KYSTNMODE" [CR] Details Get setting status of Keystone Store Mode Acceptable "000_%1" [CR] Response %1 "STR Store
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 72
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 9.9 Lamp Status Read Command 9.9.1 CR_LAMPREPL Command Command "CR_LAMPREPL" [CR] Details Get information of Lamp Replacement time Acceptable "000_%1" [CR] Response %1 "1Y indicates over lamp replacement time "1N indicates
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 73
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 9.9.6 CR_PROJH Command Command "CR_PROJH" [CR] Details Get total running time of Projector status of Lamp life control Acceptable "000_%1" [CR] Response %1 "MODE1 Lamp life control is Mode1 status "MODE2 Lamp life control is
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 74
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 9.10 Sound Status Read Command 9.10.1 CR_VOLUME Command Command "CR_VOLUME" [CR] Details Get volume value by user control * When input signal is Network, error code "101" is returned. Response Acceptable %1 "000_%1" [CR] "000
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 75
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 9.11 Setting Status Read Command 9.11.1 CR_LANG for no signal Acceptable "000_%1" [CR] Response "BLUE Blue Back is selected %1 "USER User is selected "BLACK Black Back is selected Unacceptable "Error Code" [CR] 75/88
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 76
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 9.11.5 CR_LOGO Command Command "CR_LOGO" [CR] Details Get setting status of Logo Acceptable "000_%1" [CR] Response "DFLT Default Logo is enabled %1 "USER User is enabled "OFF Logo is disabled Unacceptable "Error Code" [
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 77
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 9.11.9 CR_PIPMAININP Command Command "CR_PIPMAININP" [CR] Details Get Input and Source for "Picture in Picture". (Main picture) Acceptable "000_%1_%2" [
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 78
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 9.11.12 CR_PIPFRAMELOCK Command Command " usable Filter scroll Acceptable "000_%1" [CR] Response %1 "09" = Remaining number of usable Filter scroll : 9 times "00" = Remaining number of usable Filter scroll : 0 time Unacceptable
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 79
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 9.11.17 CR_FILH Command Command "CR_FILH" [CR] Details Get Filter used time Response Acceptable %1 "000_%1" [CR] "00000 - 99999" Unacceptable "Error Code" [CR] 9.11.18 CR_FILTIMER Command Command "CR_FILTIMER" [CR] Details
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 80
    PLC-WM5500/WM5500L Expand Serial Command Functional projector "TOP" --------- Select only top receiver of projector "BACK" ------- Select only back receiver of projector Unacceptable "Error Code" [CR] 9.11.25 CR_RTYPE Command Command "CR_RTYPE" [CR] Details Get status of supported
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 81
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 9.11.26 CR_P-MANE Command Command " Code" [CR] 9.11.27 CR_P-MANETIME Command Command "CR_P-MAETIME" [CR] Details Get setting time for starting Power Management function Response Acceptable %1 "000_%1" [CR] "001 - 030 1 to 30
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 82
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 9.11.31 CR_PTIMEMODE Command Command " Unacceptable "Error Code" [CR] 9.11.33 CR_PTIME Command Command "CR_PTIME" [CR] Details Get setting time for count down mode of P-timer Response Acceptable %1 "000_%a" [CR] "001" - "180
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 83
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 9.11.36 CR_PJLOCKNOW Command Command "CR_PJLOCKNOW" [CR] Details Get actual setting status of PIN code lock Acceptable "000_%1" [CR] Response "
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 84
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 9.11.40 CR_SHUTH Command Command "CR_SHUTH" [CR] Details Get time setting to start the shutter management Acceptable "000_%1" [CR] Response "005 006 6 %1 "479 479 "480 480 Unacceptable "Error Code" [CR] 9.11.41
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 85
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 9.11.44 CR_TESTPAT Command Command "CR_TESTPAT" [CR] Details Get setting status of Test pattern Acceptable "000_%1" [CR] Response "COLOR Color
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 86
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 9.12 Other Status Read Commands 9.12.1 CR_STATUS Command COMMAND "CR_STATUS" [CR] Detail Get operating status of Projector after turned Off due to lamp failure "81" Standby after Cooling Down due to lamp failure "2C" = Cooling
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 87
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 9.12.5 CR_TEMPFAIL Command Command "CR_TEMPFAIL" [CR] Details Get the temperature inside a projector represented as "_00.0S". When the projector is reset, "_00.0S" is set, and every time abnormal temperature occurs, it renews the
  • Sanyo PLC-WM5500/L | RS232C Expand - Page 88
    PLC-WM5500/WM5500L Expand Serial Command Functional Specifications 9.12.6 CR_TEMP Command Command "CR_TEMP" [CR] Details Get the current temperature information inside a projector for some projectors that the temperature continues to go up to abnormal status as long as lamp ballasts are hot
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
EXPAND SERIAL COMMAND
FUNCTIONAL SPECIFICATIONS
PLC-WM5500
PLC-WM5500L
Ver.1.00
SANYO Electric Co., Ltd
DS Company
Projector Division