Sanyo PLC-WR251 Instruction Manual, PLC-WR251
Sanyo PLC-WR251 - True WXGA Projector Manual
 |
UPC - 086483077234
View all Sanyo PLC-WR251 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sanyo PLC-WR251 manual content summary:
- Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 1
Multimedia Projector MODEL PLC-WR251 Network Supported Refer to the Owner's Manuals below for details about network function. □ Network Set-up and Operation □ PJ Network Manager Owner's Manual - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 2
technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. ♦ Compact Design ♦ Security Function This projector is designed compact in size and weight. It is - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 3
30 Manual PC adjustment 31 Image Mode Selection 33 Image Adjustment 34 Screen Size Adjustment 35 Video Input 37 Input Source Selection (Video, S-video) the Projector Cabinet 63 Lamp Replacement 64 Appendix 66 Troubleshooting 66 Menu Tree 70 Indicators and Projector Condition - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 4
Troubleshooting" section in the back of this manual. If the problem still persists, contact the dealer where you purchased the projector or the service not stare directly into the beam. -Install the projector in a proper position. INSTRUCTIONS IN THE OWNER'S MANUAL WITH THIS UNIT. FOR EU USERS - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 5
service personnel under the following conditions: a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the projector. c. If the projector has been exposed to rain or water. d. If the projector does not operate normally by following the operating instructions - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 6
Safety Instructions Air Circulation Openings in the cabinet are provided for from external forces. Do not transport the projector by courier or any other transport service with this case, otherwise the projector can be damaged. When handling the projector, do not drop, bump, subject it to - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 7
instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Model Number : PLC-WR251 Trade Name : Sanyo Responsible party : SANYO from the Parts Department indicated in your User Instructions. If the plug supplied is not suitable - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 8
63 for attaching.) CAUTION Do not turn on a projector with lens cap attached. High temperature from light beam may damage lens cap and result in fire hazard LAN Connection Terminal is for the Network function. Refer to the owner's manual of "Network Set-up and Operation" . Kensington Security Slot - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 9
terminal (pp.14, 16). ⑤ LAN Connection Terminal Connect the LAN cable (refer to the owner's manual of "Network Set-up and Operation"). ⑥ S-VIDEO IN Connect the S-VIDEO output signal from video equipment to this jack (p.15). ⑦ AUDIO OUT (VARIABLE) Connect an external audio amplifier to this jack - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 10
) (p.24). ③ INPUT button Select an input source (pp. 27-28, 37-38). ④ ON/STAND-BY button Turn the projector on or off (pp.18-20). ⑤ POWER indicator -Lights red when the projector is in stand-by mode. -Lights green during operations. -Blinks green in the Power management mode (p.53). ⑥ MENU button - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 11
Part Names and Functions ① ON/STAND-BY button Turn the projector on or off. (pp.18-20) ② AUTO SET 1 or COMPUTER 2 input source. (pp.27-28, 38) ④ VIDEO button Select the VIDEO input source. (p.37) ① ⑤ S-VIDEO button Select the S-VIDEO input source. (p.37) ㉒ ⑥ Point buttons - Select an item or - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 12
the instructions or your local disposal rule or guidelines. Remote Control Operating Range Point the remote control toward the projector ( assigned to this projector. Switching the remote control codes prevents interference from other remote controls when several projectors or video equipment next - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 13
feet lock latches on both side of the projector. Release the feet lock latches to lock the adjustable feet and rotate the adjustable feet to a proper height, and tilt. Keystone distortion can be adjusted automatically with the Auto setup function or manually by using the remote control or the menu - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 14
terminal when using the COMPUTER IN 2 / MONITOR OUT and the COMPUTER IN 1/ COMPONENT IN terminal as input. • When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available. • When the cable is of the longer variety, it is advisable to use the COMPUTER IN 1 / COMPONENT IN and - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 15
(Cables are not supplied with the projector. ) External Audio Equipment Video and Audio Output (Video) (L) (R) Audio Input S-Video Output Video and audio cable Audio cable (stereo) S-Video cable VIDEO AUDIO IN AUDIO OUT (stereo) S-VIDEO L R Installation Note: When the AUDIO OUT - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 16
• Audio cables • Scart-VGA cable • HDMI cable • Component cable • Component-VGA Cable (Cables are not supplied with this projector.) RGB Scart 21- Component Video Output pin Output (Y, Pb/Cb, Pr/Cr) Audio Output HDMI output Component cable Scart-VGA cable ComponentVGA cable Audio cable - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 17
system. If you are not sure of the type of power being supplied, consult your authorized dealer or service station. Connect the projector with all peripheral equipment before turning the projector on. CAUTION The AC outlet must be near this equipment and must be easily accessible. Note: Unplug the - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 18
connection. If the projector is locked with a PIN code, PIN code input dialog box will appear. Enter the PIN code as instructed on the next page automatically (p.45) • When Off is selected in the Display function, the Video/ PC selection window and the input signal guidance window are not shown on - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 19
number in a column on page 80 of this manual and keep it on hand. Should the PIN code be missing or forgotten, consult your dealer or service center. Basic Operation PIN Code Input Dialog Box After the OK icon disappears, you can operate the projector. Note: • If the PIN code number is not - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 20
top control or on the remote control, and Power off? appears on the screen. 2 Press the ON/STAND-BY button again to turn off the projector. The POWER indicator starts to blink red, and the cooling fans keep running. (You can select the level of fans' quietness and speed. See "Fan - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 21
Menu The projector can be adjusted or set via the On-Screen Menu. The menus have a hierarchical structure, with a main menu that is divided into submenus, which are further divided into other submenus. For each adjustment and setting procedure, refer to respective sections in this manual. 1 Press - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 22
Full, Custom and Digital zoom +/- ] (pp.35-36). For Video source, used to set size of image [Normal, Full, Zoom, sound (p.24). Setting Used to set the projector's operating configurations (pp.44-59). Information Display manual of "Network Set-up and Operation". Guide The key operation is - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 23
keystone distortion after pressing the AUTO SETUP button on the top control or the AUTO SET button on the remote control, correct the image manually as follows: Press the KEYSTONE button on the remote control. The Keystone dialog box appears. Use the Point ▲▼ buttons to correct keystone distortion - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 24
Basic Operation Sound Adjustment Direct Operation Volume Press the VOLUME+/- buttons on the top control or on the remote control to adjust the volume. The volume dialog box appears on the screen for a few seconds. Top Control VOLUME+/buttons Mute Press the MUTE button on the remote control to - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 25
buttons enables you to make the desired operation quickly without calling up the On-Screen Menu. COMPUTER 1/2, HDMI, VIDEO, S-VIDEO and COMPONENT buttons Press the COMPUTER 1/2, HDMI, VIDEO, S-VIDEO and COMPONENT buttons on the remote control to select the input source. See pages 27-28,37-38 for - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 26
Basic Operation NO SHOW button Press the NO SHOW button on the remote control to black out the image. To restore to normal, press the NO SHOW button again or press any other button. The screen changes each time you press the NO SHOW button as follows. black out → normal → black out → normal No - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 27
should be selected through Menu operation as described below. Top Control INPUT button Computer 1 Computer 2 HDMI Video Remote Control COMPUTER 1 button Computer 1(RGB) Computer 1(Scart) S-video COMPUTER 2 can not be selected when using the COMPUTER IN 2/ MONITOR OUT terminal as MONITOR OUT - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 28
can not be selected when using the COMPUTER IN 2/ MONITOR OUT terminal as MONITOR OUT output. Top Control INPUT button Computer 1 Computer 2 HDMI Video S-video Menu Operation 1 Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Input and then press the Point - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 29
required (pp.31-32). There is no signal input from the computer. Check the connection between your computer and the projector. (See "Troubleshooting" on page 67.) The preset system is manually adjusted in the PC adjust Menu. The adjusted data can be stored in Mode 1-5 (pp.31-32). PC Systems provided - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 30
adjusted parameters from the Auto PC adjustment can be stored in the projector. Once the parameters are stored, the setting can be done just by adjustment function. When the image is not provided properly with this operation, manual adjustments are required (pp.31-32). • The Auto PC adjustment - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 31
PC adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has five independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific computer. 1 Press the MENU button to display the On-Screen - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 32
be selected when 480i, 575i, 480p, 575p, 720p, 1035i, or 1080i is selected in the PC System Menu (p.29). • When input computer signal to the projector, PC adjust will become available. Press MENU button to close this dialog box. 32 Press SELECT button to store adjusted data - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 33
pictures in a bright room. Standard Normal picture mode preset on the projector. Real Picture mode with improved halftone for graphics. Blackboard (Green) For the preset four colors. Image 1-4 For viewing with the user preset image mode in the Image adjust Menu (see pages 34-35). This - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 34
mode Use the Point ◄► buttons to adjust the setting value. Note: • When White balance Red, Green or Blue is adjusted, Color temp. will change to User. • When Blackboard(Green) or Colorboard is selected in Image select, Color temp. will change to Blackboard or Colorboard. 34 - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 35
the screen size. True Provide the image in its original size. When the original image size is larger than the screen size (1280 x 800), the projector enters to the panning mode automatically. Use the Point buttons to pan the image. When adjusted, the arrows will turn red. When reached to the - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 36
Computer Input Custom Adjust the screen scale and position manually with this function. Press the Point ► button at Custom and the Custom is displayed on the screen, you can use the Point ▲▼ buttons to choose - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 37
control. Before using INPUT button, correct input source should be selected through menu operation as described below. Remote Control VIDEO button Video S-VIDEO button S-video Top Control COMPUTER 2 can not be selected when using the COMPUTER IN 2/ MONITOR OUT terminal as MONITOR OUT output - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 38
the Point ▲▼ buttons to select Component or RGB(Scart) and then press the SELECT button. Component When the input source is coming from video equipment connected to the COMPUTER IN 1/COMPONENT IN terminal with a Component-VGA Cable, select Component. RGB (Scart) When the input source is coming - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 39
select the desired system and then press the SELECT button. Video or S-video Auto The projector automatically detects an incoming video system, and adjusts itself to optimize its performance. When Video System is PAL-M or PAL-N, select the system manually. PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N If the - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 40
. Standard Normal picture mode preset on the projector. Cinema Picture mode adjusted with fine tone. 1-4 For viewing with the user preset image mode in the Image adjust Menu (see is provided in each computer, component, S-video and video input source. Remote Control IMAGE button IMAGE - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 41
tone (from 0 to 63). Note: • When the White balance Red, Green, or Blue is adjusted, the Color temp. level will change to User. • Tint cannot be selected when the video system is PAL, SECAM, PAL-M or PAL-N (p.39). • When Blackboard(Green) or Colorboard is selected in Image select, Color temp. will - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 42
........... Lower reduction L2........... Higher reduction Progressive An interlaced video signal can be displayed in progressive mode. Select one picture. Film........ For watching a film. With this function, the projector reproduces pictures faithful to the original film quality. Reset To reset the - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 43
Video Input Screen Size Adjustment This projector has the picture screen resize video aspect ratio signals. Natural wide Modify the 4:3 aspect ratio image to fit the screen size(16:9 aspect ratio) by stretching the image to make it look natural. Custom Adjust the screen scale and position manually - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 44
Setting Setting This projector has a Setting menu that allows you to set up the other various functions described below. 1 Press the MENU button to display the On-Screen Menu. - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 45
Keystone Auto Always works and corrects keystone distortion according to the projector's tilt. Manual . . . . Works only when pressing the AUTO SETUP back to the current search signal. If the COMPUTER 1/2, HDMI, VIDEO, S-VIDEO or COMPONENT button is pressed, Input search will go back to the - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 46
. . Project a blue background Black . . Project a black background User . . Project an image captured in the Logo setting. Keystone Display ......... Show the input image instead of the countdown when turning on the projector. Use this function when you want to project the image as early - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 47
and Capture functions cannot be selected. Logo select Logo select This function decides on the starting-up display from among following options. User......... Show the image you captured. Default..... Show the factory-set logo. Off Show the countdown display only. Picture in Picture Standby mode - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 48
it to User. Then the captured image will be displayed the next time you turn on the projector. To cancel video equipment can be captured except for 1035i, and 1080i. • When capturing the image that has been adjusted by the Keystone function, the adjusted data is automatically reset and the projector - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 49
-digit number. After entering the four-digit number, move the pointer to Set. Press the SELECT button so that you can start to operate the projector. If you entered an incorrect Logo PIN code, Logo PIN code and the number will turn red for a moment. Enter the correct Logo PIN code - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 50
function is used to project the image from a ceiling-mounted projector. Rear When this function is set to On, the equipment to equipment. For details, refer to the owner's manual of your Digital R/G/B equipment. When the black parts of 1 or Video) so that the Terminal function will be available. (pp.27-28, - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 51
Setting Picture in Picture This function is used to project two videos simultaneously by placing a separate small sub screen within the main screen. (Picture in Picture combinations provided in this projector are shown on pages 75.) Only the sound on the main picture is heard, the sound on the sub - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 52
is powered off. Eco Select Eco when you do not use the projector via network. The projector's network function will stop when turning off the projector. Refer to the owner's manual of "Network Set-up and Operation". Note: • Factory default is Network. • When selecting Network, the cooling - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 53
turned on just by connecting the AC power cord to a wall outlet. Note: • Be sure to turn off the projector properly (see "Turning Off the Projector" on page 20). If the projector is turned off in the incorrect sequence, the On start function does not work properly. • On start function is available - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 54
the situation below.� • When the input signal is NTSC of composite and S-video, and the system is set according to the signal or set on Auto. • The system must be set on NTSC or Auto in Video System Selection. (p.39) • The icon of Closed caption is displayed in gray - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 55
secondary code (Code 2). This switching function prevents remote control interference when operating several projectors or video equipment at the same time. When operating the projector in Code 2, both the projector and the remote control must be switched to Code 2. Remote control To change the - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 56
security for the projector operation. Power management projector or the service center. PIN code lock This function prevents the projector projector. On2.......... Enter the PIN code to operate the projector projector projector is locked with the PIN code, the Security icon appears on the - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 57
-digit number. After entering the four-digit number, move the pointer to "Set." Press the SELECT button so that you can start to operate the projector. If you entered an incorrect PIN code, PIN code and the number will turn red for a moment. Enter the correct PIN code all over again - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 58
meters or more above the sea level) where the fans have less cooling effect. On 2 Faster than On 1 mode. Select this mode when using the projector in higher altitudes than above where the fans have lesser cooling effect. Note: The fan noise becomes louder in On 1 and On2. Filter counter This - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 59
log This function records anomalous operations while the projector is in operation and use it when diagnosing will be deleted. Setting Factory default This function returns all setting values except for the User logo, PIN code lock, Logo PIN code lock, Lamp counter Factory default and Filter - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 60
Source Information Display The Information Menu is used for checking the status of the image signal being projected and the operation of the projector. Direct Operation Press the INFO. button on the remote control to display the Information Menu. Remote Control Menu Operation Press the Point - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 61
cannot be turned on and the WARNING indicator still lights red, unplug the AC power cord and contact the service station. CAUTION DO NOT LEAVE THE PROJECTOR WITH THE AC POWER CORD CONNECTED UNDER AN ABNORMAL CONDITION. IT MAY RESULT IN FIRE OR ELECTRIC SHOCK. Top Control WARNING emit a red - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 62
conditions, dust may accumulate on a lens, LCD panels, or optical elements inside the projector degrading the quality of a projected image. When the symptoms above are noticed, contact your authorized dealer or service station for proper cleaning. Resetting the Filter Counter Be sure to reset the - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 63
a knot in the string to secure it in place. 2 To pass the other end of the string into the hole on the top of the projector and pull at it. Cleaning the Projection Lens Unplug the AC power cord before cleaning. Gently wipe the projection lens with a cleaning cloth that contains - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 64
REPLACEMENT LAMP Replacement lamp can be ordered through your dealer. When ordering a projection lamp, give the following information to the dealer. ● Model No. of your projector ● Replacement Lamp Type No. : PLC-WR251 : POA-LMP131 (Service Parts No. 610 343 2069) 64 - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 65
IMMEDIATELY after the projector has cooled down. (Follow carefully the instructions in the Lamp Replacement section of this manual.) Continuous use of the projector except those who are authorized trained technicians and who are familiar with projector service. Inappropriate attempts to service - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 66
Troubleshooting Before calling your dealer or service center for assistance, check the items below once again. -Make sure you have properly connected the projector . The initial display is not same as the default set. - Make sure User or Off are not chosen at Logo (select) function. See page 47. - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 67
monitor output when connecting to a projector. See your computer's instruction manual for the setting. - It takes about 30 seconds to display an image after turning on the projector. See page 18. - Check the Input signal, color system, video system or computer system mode - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 68
16.4'(5 m). - Make sure the code of the remote control is conformed to the projector's code. See page 55. - Unlock the Key lock function for the remote dealer where you purchased the projector or the service code lock, Security key lock center. or Security PIN code lock. 68 - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 69
Appendix WARNING : High voltages are used to operate this projector. Do not attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Specify the model number and explain about the - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 70
Appendix Menu Tree Computer Input/Video Input Input Input Computer 1 Computer 2 HDMI Video S-video RGB Component RGB (Scart) RGB Sound Sound Volume temp. Red Green Blue Sharpness Gamma Reset Store 0-63 0-63 XLow Low Mid High User 0-63 0-63 0-63 0-15 0-15 Yes/No Image 1 Image 2 Image 3 Image - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 71
Appendix Video Input adj. On/Off Auto Keystone Auto Manual Off Store/Reset Blue/User/Black On/Countdown off/Off Logo select User Default Off Capture Yes/No Logo 1/ Mode 2 Code 1-Code2 Security Fan Fan control Key lock Off Projector Remote control PIN code lock Off/On1/On2 PIN code change L1/L2 - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 72
Unplug the AC power cord and plug it again to turn on the projector. If the projector is turned off again, unplug the AC power cord and contact the dealer or the service center for service and checkup. Do not leave the projector on. It may cause an electric shock or a fire hazard. • • • green - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 73
Appendix Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V-, H-Frequency mentioned below and less than 140 MHz of Dot Clock. When selecting these modes, PC - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 74
of your PC may not be projected correctly. In such a case, confirm your PC settings. • When you project a DVI signal, connect the cables, turn the projector on, then select the input. Finally, turn on your PC. Be sure to follow this procedure, otherwise an image may not be projected on the - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 75
List of Picture in Picture Appendix o : Picture in Picture combinations are enabled - : Picture in Picture combinations are disabled Note: • When the input signal(s) is/are incompatible, X mark will be displayed on the Main/Sub picture. • Depending on the frequency or signal type of PC/AV input - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 76
Appendix Technical Specifications Mechanical Information Projector Type Multi-media Projector Dimensions (W x H x D) 12.80" x 3.27" x 9.12" (326mm x 83.1mm x 231.6mm) (Not including �c�u�s Projection Lamp 225 W Interface Video Input Jack S-video Input Jack Audio Input Jacks Computer - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 77
Appendix Accessories Owner's Manual (CD-ROM) Quick Reference Guide & Safety Manual Soft Carrying Case AC Power Cord Remote Control and Batteries VGA Cable Lens Cap with String PIN Code Label Network Application (CD-ROM) ● The specifications - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 78
projector supports all commands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1. For PJ Link password, see the owner's manual of "Network Set-up and Operation." Projector Input Computer 2 (Analog) HDMI(Digital) RGB Computer 1 Component RGB (Scart) Video - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 79
Appendix Configurations of Terminals COMPUTER IN 1 /COMPONENT IN /COMPUTER IN 2/MONITOR OUT (ANALOG) Terminal: Analog RGB (Mini D-sub 15 pin) 54 32 1 10 9 8 7 6 15 14 13 12 11 1 Red (R/Cr) Input/Output 2 Green (G/Y) Input/Output 3 Blue (B/Cb) Input/Output 4 ----- 5 Ground (Horiz.sync.) 6 - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 80
Code Number Memo Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. PIN Code Lock No. Factory default set No: 1 2 3 4* Logo PIN Code Lock No. Factory default set - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 81
Dimensions 93.5(3.68) 232.5(9.15) 109.7(4.32) 121.9(4.80) Appendix Unit: mm(inch) Screw Holes for Ceiling Mount Screw: M4 Depth: 12.0(0.472) 219.4(8.64) 101(3.98) 55(2.17) 107.6(4.24) 25(0.98) 23(0.91) 51.9 (2.05) 12ºMAX 80.5(3.17) 3.8 (0.15) 24.8 (0.98) 42.3 (1.67) 7 (0.28) 40.8 (1.61 - Sanyo PLC-WR251 | Instruction Manual, PLC-WR251 - Page 82
KE5AA SANYO Electric Co., Ltd.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
 |
 |
Multimedia Projector
MODEL
PLC-WR251
Owner’s Manual
Network Supported
Refer to the Owner's Manuals below for
details about network function.
□
Network Set-up and Operation
□
PJ Network Manager