Sanyo PLC-WTC500L RS232C Basic

Sanyo PLC-WTC500L - 5000 Lumens Manual

Get Sanyo PLC-WTC500L - 5000 Lumens PDF manuals and user guides View all Sanyo PLC-WTC500L manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo PLC-WTC500L manual content summary:

  • Sanyo PLC-WTC500L | RS232C Basic - Page 1
    BASIC SERIAL COMMAND FUNCTIONAL SPECIFICATIONS PLC-WTC500L Ver.1.00 SANYO Electric Co., Ltd DS Company Projector Business Division
  • Sanyo PLC-WTC500L | RS232C Basic - Page 2
    PLC-WTC500L Basic Serial Command Functional Specifications Contents 1. Overview ...4 2. Serial Interface Specification 4 2.1. Transfer Specification 4 2.2. Connection ...4 3. Notes for Communication 5 4. Functional Execution Command Table 6 5. Status Read Command Table 7 6. Functional Execution
  • Sanyo PLC-WTC500L | RS232C Basic - Page 3
    PLC-WTC500L Basic Serial Command Functional Specifications 6.32 Command 17 6.52 LENS SHIFT UP Command 17 6.53 LENS SHIFT DOWN Command 17 6.54 LENS SHIFT LEFT Command 18 6.55 LENS SHIFT RIGHT Command 18 6. Input Mode Read Command 24 7.6 Lamp Time Read Command 24 7.7 Setting Read Command 24 7.8
  • Sanyo PLC-WTC500L | RS232C Basic - Page 4
    -WTC500L Basic Serial Command Functional Specifications 1. Overview These specifications define projector control commands for PLC-WTC500L. The projector control commands are used to control a projector through RS-232C from a computer. 2. Serial Interface Specification 2.1. Transfer Specification
  • Sanyo PLC-WTC500L | RS232C Basic - Page 5
    PLC-WTC500L Basic Serial Command Functional Specifications 3. Notes for Communication The projector command is defined as one command per line that starts with "C" and ends with carriage return (0x0D). When carriage return (0x0D) is received, decoding starts.
  • Sanyo PLC-WTC500L | RS232C Basic - Page 6
    PLC-WTC500L Basic Serial Command Functional Specifications 4. Functional Execution Command Table Command C00 C01 C02 C03 C04 C05 C06 C07 C08 C09 C0A C0B C0C C0D C0E C0F C10 C11 C12 C13
  • Sanyo PLC-WTC500L | RS232C Basic - Page 7
    PLC-WTC500L Basic Serial Command Functional Specifications Command Item C40 C5B --- C5C --- C5D Lens Shift Up C5E Lens Shift Down C5F Lens Shift Left C60 Lens Shift Right "---" means "No Function CR3 CR4 --LAMP TIME READ SETTING READ CR5 --- CR6 CR7 TEMP READ LAMP MODE READ
  • Sanyo PLC-WTC500L | RS232C Basic - Page 8
    PLC-WTC500L Basic Serial Command Functional Specifications 6. Functional Execution Command 6.1 Format PC issues a command in the following format: "C" Command [CR] Command: two characters (See Functional Execution Command Table) Projector the same way as in remote control: 1) Sending-side system
  • Sanyo PLC-WTC500L | RS232C Basic - Page 9
    PLC-WTC500L Basic Serial Command Functional Specifications 6.4 Operation Requirements 1) In the following status of projector, Available Functional Execution Commands are limited. Projector Status Standby Mode Countdown in process Available Functional Execution Commands C00: POWER ON C00: POWER
  • Sanyo PLC-WTC500L | RS232C Basic - Page 10
    PLC-WTC500L Basic Serial Command Functional Specifications 6.5 POWER ON Command Command "C00" [CR] Detail Power OFF?" message, which is displayed when Power is turned OFF with button of the projector or remote control. Acceptable [ACK] [CR] Response Unacceptable "?" [CR] 6.7 POWER OFF Command
  • Sanyo PLC-WTC500L | RS232C Basic - Page 11
    PLC-WTC500L Basic Serial Command Functional Specifications 6.10 INPUT 3 Command Command "C07" [CR] Detail Select Input 3. This command works differently from the command by "Input 3" key of the remote way as VOLUME - button of the projector and remote control. Acceptable [ACK] [CR] Response
  • Sanyo PLC-WTC500L | RS232C Basic - Page 12
    PLC-WTC500L Basic Serial Command Functional Specifications 6.16 VIDEO MUTE ON Command Command "C0D" [CR] Detail Video Mute ON This command works the same way as "SHUTTER" button of the remote command works the same way as "SHUTTER" button of remote control for SHUTTER OPEN, but does not work for
  • Sanyo PLC-WTC500L | RS232C Basic - Page 13
    PLC-WTC500L Basic Serial Command Functional Specifications 6.22 DISPLAY CLEAR Command Command "C1E" [CR] Detail Clear On-screen Display under all conditions Acceptable [ACK] [CR] Response Unacceptable "?" [CR] 6.23 BRIGHTNESS + Command Command "
  • Sanyo PLC-WTC500L | RS232C Basic - Page 14
    PLC-WTC500L Basic Serial Command Functional Specifications 6.29 ON START SET Command Command "C28" [CR] Detail Enable Power ON Start mode and expand image size This command works the same way as "D.ZOOM " button of the remote control. Acceptable [ACK] [CR] Response Unacceptable "?" [CR] 14/25
  • Sanyo PLC-WTC500L | RS232C Basic - Page 15
    PLC-WTC500L Basic Serial Command Functional Specifications 6.35 D.ZOOM - Command Command "C31" [CR] Detail Enter Digital Zoom mode and reduce image size This command works the same as "D.ZOOM " button of the remote the command by Point button "
  • Sanyo PLC-WTC500L | RS232C Basic - Page 16
    PLC-WTC500L Basic Serial Command Functional Specifications 6.41 POINTER DOWN Command Command "C3D" [CR] Detail Move down the Pointer of On-Screen Display Menu This command works the same way as "▼" button of the projector way as "FREEZE" button of the remote control for Freeze ON, but does not
  • Sanyo PLC-WTC500L | RS232C Basic - Page 17
    PLC-WTC500L Basic Serial Command Functional Specifications 6.47 FOCUS + Command Command "C4B" [CR] Detail Adjust on-screen focus by making focal length longer. (The lens moves backward) This command works the same way as "FOCUS" button of the remote [CR] 6.52 LENS SHIFT UP Command Command "C5D
  • Sanyo PLC-WTC500L | RS232C Basic - Page 18
    PLC-WTC500L Basic Serial Command Functional Specifications 6.54 LENS SHIFT LEFT Command Command "C5F" [CR] Detail Move projection area leftward. Acceptable [ACK] [CR] Response Unacceptable "?" [CR] 6.55 LENS SHIFT same by "AUTO PC" button of the remote control. Acceptable [ACK] [CR] Response
  • Sanyo PLC-WTC500L | RS232C Basic - Page 19
    PLC-WTC500L Basic Serial Command Functional Specifications 6.60 KEYSTONE →Command Command "C90" [CR] Detail Correct keystone distortion by reducing right part of image. This command invokes both operations of keystone distortion correction
  • Sanyo PLC-WTC500L | RS232C Basic - Page 20
    PLC-WTC500L Basic Serial Command Functional Specifications 7 Status Read Command 7.1 Format PC issues a command in the following format. "CR" Command [CR] Command: one character (See Status Read Command Table) When projector due to Lamp Failure "81" = Standby after Cooling Down due to Lamp Failure
  • Sanyo PLC-WTC500L | RS232C Basic - Page 21
    PLC-WTC500L Basic Serial Command Functional Specifications Details for Response "00" [CR] Status: Power ON on models.) This function is intended to cool down lamps and other optical parts, and is quite important for projector's reliability. During this time, any Functional Execution Command is
  • Sanyo PLC-WTC500L | RS232C Basic - Page 22
    PLC-WTC500L Basic Serial Command Functional Specifications "88" [CR] Status: Standby after Cooling Down due to Abnormal Temperature When the status becomes Standby after the temperature goes down by Cooling Down operation invoked due to Abnormal Temperature, the projector returns "88" [CR]. This
  • Sanyo PLC-WTC500L | RS232C Basic - Page 23
    PLC-WTC500L Basic Serial Command Functional Specifications "2C" [CR] Status: Cooling Down in process due to Shutter management function to Standby. The status is kept until the next operation starts. When projector is turned on again, it cancels the last status and starts normal operation. 23/25
  • Sanyo PLC-WTC500L | RS232C Basic - Page 24
    PLC-WTC500L Basic Serial Command Functional Specifications 7.5 Input Mode Read Command Command "CR1" [CR] Detail Get currently selected Input No. between each of them. %1 = lamp No.1 %2 = lamp No.2 Response %1 ex; "00410_00410" [CR] Lamp No.1 = 410 Hours Lamp No.2 = 410 Hours Note;
  • Sanyo PLC-WTC500L | RS232C Basic - Page 25
    PLC-WTC500L Basic Serial Command Functional Specifications 7.8 Temp Read Command Command "CR6" [CR] Detail Get the information of temperature inside a projector to hardware problems, it %3 starts with "E" like"E00.0" [CR]. With several built-in temperature sensors, the projector returns the
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
BASIC SERIAL COMMAND
FUNCTIONAL SPECIFICATIONS
PLC-WTC500L
Ver.1.00
SANYO Electric Co., Ltd
DS Company
Projector Business Division