Sanyo PLC-WXU300 RS232 Basic

Sanyo PLC-WXU300 - 2500 Lumens Manual

Get Sanyo PLC-WXU300 - 2500 Lumens PDF manuals and user guides
UPC - 086483074226
View all Sanyo PLC-WXU300 manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo PLC-WXU300 manual content summary:

  • Sanyo PLC-WXU300 | RS232 Basic - Page 1
    BASIC SERIAL COMMAND SPECIFICATIONS PLC-WXU300 Ver.1.00 SANYO Electric Co., Ltd DS Company Projector Division
  • Sanyo PLC-WXU300 | RS232 Basic - Page 2
    PLC-WXU300 Basic Serial Command Specifications CONTENTS 1. Overview ...4 2. Serial Interface Specifications 4 2.1. Transfer Specifications 4 ...9 6.4. Operation Requirements 10 6.5. POWER ON Command 11 6.6. POWER OFF Command Quick Power OFF 11 6.7. POWER OFF Command 11 6.8. HDMI Command
  • Sanyo PLC-WXU300 | RS232 Basic - Page 3
    PLC-WXU300 Basic Serial Command Specifications 6.32. BRIGHTNESS + Command 15 6.33. BRIGHTNESS - Command 15 6.34. IMAGE (Toggle) Command 16 6.35. ON START Setting Command 16 6.36. ON START Cancel Command 16 6.37. Power Management Ready Command 16 6.38. Power 7.6. Lamp Time Read Command 23
  • Sanyo PLC-WXU300 | RS232 Basic - Page 4
    projector control commands for PLC-WXU300. 1.2. The projector control commands are used to remotely control a projector can be changed in service mode. 2.2. Connection Dedicated serial cable must be used for connection to a computer and a projector. PC COM 1 Projector Control Port D-Sub
  • Sanyo PLC-WXU300 | RS232 Basic - Page 5
    PLC-WXU300 Basic Serial Command Specifications 3. Notes for Communication 1. The projector control command is defined as one seconds. 5. It takes about 5 seconds for internal initialization after plugging in AC power. During this time, it cannot process commands. Do not issue any command. 6.
  • Sanyo PLC-WXU300 | RS232 Basic - Page 6
    PLC-WXU300 Basic Serial Command Specifications 4. Functional Execution Command Table Command Item C00 POWER ON C01 POWER OFF Quick Power OFF C02 POWER OFF C03 ――― C04 HDMI C05 Computer 1 C06 Computer 2 C07 Video C08 ――― C09 VOLUME + C0A VOLUME - C0B AUDIO MUTE ON C0C
  • Sanyo PLC-WXU300 | RS232 Basic - Page 7
    PLC-WXU300 Basic Serial Command Specifications Command C40 C41 C42 C43 C44 C45 C46 C47 C48 C49 C4A C4B C4C C4D C4E C4F C50 C51 C52 C53
  • Sanyo PLC-WXU300 | RS232 Basic - Page 8
    PLC-WXU300 Basic Serial Command Specifications 5. Status Read Command Table Command CR0 CR1 CR2 Item Status Read Input Mode Read ――― CR3 (Corresponding) Lamp Time Read CR4 CR5 Setting Read ――― CR6 Temp Read CR7 Lamp Mode Read ――― means no function. Memo 8/23
  • Sanyo PLC-WXU300 | RS232 Basic - Page 9
    PLC-WXU300 Basic Serial Command Specifications 6. Functional Execution Command 6.1. Format 6.1.1 PC issues a command in format as below. "C" COMMAND [CR] Command: two characters (See Basic Functional Execution Command Table) A projector the same as that of the remote control; 6.2.1. System: issues
  • Sanyo PLC-WXU300 | RS232 Basic - Page 10
    PLC-WXU300 Basic Serial Command Specifications 6.4. Operation Requirements 1)When the projector's status is any of below, Functional Execution Commands are limited. Projector Status Standby Mode Countdown in process Cooling Down in process Cooling Down due to Abnormal Temperature Abnormal
  • Sanyo PLC-WXU300 | RS232 Basic - Page 11
    is terminated. Acceptable [ACK] [CR] Response Unacceptable " "[CR] 6.6. POWER OFF Command Quick Power OFF Command "C01" [CR] Detail Power OFF (Standby) When Power is OFF with ON/STAND-BY button of the projector and remote control, "Power OFF?" is displayed. However, as soon as this command is
  • Sanyo PLC-WXU300 | RS232 Basic - Page 12
    PLC-WXU300 Basic Serial Command Specifications 6.10. Computer 2 Command Command "C06" [CR] Detail Select Computer2 Input Although projector Down This command operates the same way as "VOLUME-" button of the projector and remote control. Acceptable [ACK] [CR] Response Unacceptable " "[CR] 6.
  • Sanyo PLC-WXU300 | RS232 Basic - Page 13
    PLC-WXU300 Basic Serial Command Specifications 6.15. AUDIO MUTE OFF Command Command "C0C" [CR] Detail Sound Mute OFF. This command works the same way as "MUTE" button of the remote control for Mute OFF, but does not work for Mute ON. Acceptable [ACK] [CR] Response Unacceptable " "[CR] 6.16.
  • Sanyo PLC-WXU300 | RS232 Basic - Page 14
    PLC-WXU300 Basic Serial Command Specifications 6.21. Image Real Command Command "C12" [CR] Detail Set image to Real mode. Acceptable [ACK] [CR] Response Unacceptable " "[CR] 6.22. Image
  • Sanyo PLC-WXU300 | RS232 Basic - Page 15
    PLC-WXU300 Basic Serial Command Specifications 6.28. Image Dynamic Command Command "C19" [CR] Detail Set Unacceptable " "[CR] 6.32. BRIGHTNESS + Command Command "C20" [CR] Detail Brightness of User Control +1. Acceptable [ACK] [CR] Response Unacceptable " "[CR] 6.33. BRIGHTNESS - Command
  • Sanyo PLC-WXU300 | RS232 Basic - Page 16
    PLC-WXU300 Basic Serial Command Specifications 6.34. IMAGE (Toggle) Command Command "C27"[CR] Detail Switch Image Setting status. This command works the same way as "IMAGE" button of the remote Detail Enable Power ON Start. This status is stored in EEPROM and retained regardless of Power OFF/ON
  • Sanyo PLC-WXU300 | RS232 Basic - Page 17
    PLC-WXU300 Basic Serial Command Specifications 6.40. D.ZOOM + Command Command "C30" [CR] Detail Enter Digital Zoom mode and expand image size. This command works the same way as "D.ZOOM ▲" button of the remote from the pointer ">" of the projector and remote control, and has no function of
  • Sanyo PLC-WXU300 | RS232 Basic - Page 18
    PLC-WXU300 Basic Serial Command Specifications 6.46. POINTER UP Command Command "C3C" [CR] Detail Move up the Pointer of On-Screen Display Menu. This command works the same way as the pointer "▲" of the projector same way as "FREEZE" button of the remote control for Freeze ON, but does not work
  • Sanyo PLC-WXU300 | RS232 Basic - Page 19
    PLC-WXU300 Basic Serial Command Specifications 6.52. Computer 1 RGB (SCART) Command Command "C51"[CR] Detail Select Scart input in Computer1. Although projector the same way as "AUTO PC ADJ." button of the remote control. Sending the command during Auto PC Adj. operation stops the operation. This is
  • Sanyo PLC-WXU300 | RS232 Basic - Page 20
    PLC-WXU300 Basic Serial Command Specifications 7. Status Read Command 7.1. Format 7.1.1. PC issues commands in format as below; "CR" Command [CR] Command 1 character See Basic Status Read Command Table 7.1.2. When a projector receives the appropriate command, it returns a character line as the
  • Sanyo PLC-WXU300 | RS232 Basic - Page 21
    down the lamps and other optical parts and is quite important for projector's reliability. During this time, Functional Execution Commands are invalid. "10" [CR] Status: Power Failure When the power supply voltage inside the projector reaches abnormal status, the projector is automatically turned
  • Sanyo PLC-WXU300 | RS232 Basic - Page 22
    PLC-WXU300 Basic Serial Command Specifications information of temperature anomaly is canceled and normal operation is executed. "24" [CR] Status: Processing Power Save / Cooling Down Power management function in Setting menu works and the status goes to Power Save / Cooling Down. During this time,
  • Sanyo PLC-WXU300 | RS232 Basic - Page 23
    and the data of sensor 2 follows. Unacceptable " "[CR] 7.9.Lamp Mode Read Command Command "CR7" [CR] Detail Get lamp mode status. For 1 lamp projector, get if it is lighting or not. Acceptable "%1" [CR] Response %1 "00" [CR]=Light is out. "01" [CR]=Light is on. Unacceptable " "[CR] 23/23
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
BASIC SERIAL COMMAND SPECIFICATIONS
PLC-WXU300
Ver.1.00
SANYO Electric Co., Ltd
DS Company
Projector Division