Sanyo PLC-XK2600 Owner's Manual

Sanyo PLC-XK2600 - 2600 Lumens Manual

Get Sanyo PLC-XK2600 - 2600 Lumens PDF manuals and user guides
UPC - 086483079504
View all Sanyo PLC-XK2600 manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo PLC-XK2600 manual content summary:

  • Sanyo PLC-XK2600 | Owner's Manual - Page 1
    Multimedia Projector MODEL PLC-XK2200 PLC-XK2600 Network Supported  Wired LAN Refer to the Owner's Manuals below for details about network function.  Network Set-up and Operation Owner's Manual
  • Sanyo PLC-XK2600 | Owner's Manual - Page 2
    is loaded with the Wired LAN network function. You can operate and manage the projector via network. For details, refer to the owner's manual of "Network Setup and Operation." ♦ Auto Setup Function This function enables Input search, Auto Keystone correction and Auto PC adjustment by simple
  • Sanyo PLC-XK2600 | Owner's Manual - Page 3
    To the Owner 4 Safety Instructions 5 Air Circulation 6 Installing the Projector in Proper Position 6 Moving the Projector 6 Compliance 7 Part Projector 18 Troubleshooting 63 Turning Off the Projector 20 Menu Tree 67 How to Operate the On-Screen Menu 21 Indicators and Projector
  • Sanyo PLC-XK2600 | Owner's Manual - Page 4
    again, check operations and cable connections and try the solutions in the "Troubleshooting" section on pages 63-65 of this manual. If the problem still persists, contact the dealer where you purchased the projector or the service center. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO
  • Sanyo PLC-XK2600 | Owner's Manual - Page 5
    service personnel under the following conditions: a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the projector. c. If the projector has been exposed to rain or water. d. If the projector does not operate normally by following the operating instructions
  • Sanyo PLC-XK2600 | Owner's Manual - Page 6
    Safety Instructions Air Circulation Openings in the cabinet are provided for damage to the projector. For information about transporting the projector by courier or any other transport service, consult your dealer. - Do not put the projector in a case before the projector is cooled enough
  • Sanyo PLC-XK2600 | Owner's Manual - Page 7
    instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Model Number : PLC-XK2200; PLC-XK2600 Trade Name Sanyo Responsible party : SANYO (CSA). AC Power Cord has a grounding-type AC line plug. This is a safety feature
  • Sanyo PLC-XK2600 | Owner's Manual - Page 8
    Lens Cap (See page 60 for attaching.) CAUTION Do not turn on a projector with lens cap attached. High temperature from light beam may damage lens cap LAN Connection Terminal is for the Network function. Refer to the owner's manual of "Network Set-up and Operation" .  Kensington Security Slot This
  • Sanyo PLC-XK2600 | Owner's Manual - Page 9
    ① ② ③ ④⑤ (MIC)- ⑧ᶉ ⑦⑥ ① CONTROL PORT When the projector is controlled by a computer, connect to this jack with serial control (p.15). ⑤ LAN Connection Terminal Connect the LAN cable (refer to the owner's manual of "Network Set-up and Operation"). ⑥ AUDIO OUT (VARIABLE) Connect an external
  • Sanyo PLC-XK2600 | Owner's Manual - Page 10
    PC adj. and Auto Keystone functions) in the setting menu. (pp.23, 45). ④ ON/STAND-BY button Turn the projector on or off (pp.18-20). ⑤ POWER indicator - Lights red when the projector is in stand-by mode. - Lights green during operations. - Blinks green in the Power management mode (p.49). ⑥ MENU
  • Sanyo PLC-XK2600 | Owner's Manual - Page 11
    Part Names and Functions Remote Control ② ① ③ ④ ⑳ ⑲ ⑤ ⑥ ⑦ ⑱ ⑧ ⑰ ⑨ ⑯ ⑮ ⑩ ⑭ ⑪ ⑬ ⑫ ① ON/STAND-BY button Turn the projector on or off. (pp.18-20) ② AUTO SET button Execute the setting of Auto setup (includes Input search, Auto PC adj. and Auto Keystone functions)
  • Sanyo PLC-XK2600 | Owner's Manual - Page 12
    an explosion if battery is replaced by an incorrect type. ● Dispose of used batteries according to the instructions or your local disposal rule or guidelines. Remote Control Operating Range Point the remote control toward the projector (Infrared Remote Receiver) when pressing the buttons. Maximum
  • Sanyo PLC-XK2600 | Owner's Manual - Page 13
    lock the adjustable foot and rotate the adjustable foot to adjust the position and tilt. To retract the adjustable foot, lift the front of the projector and push and undo the foot lock latch. Keystone distortion of the projected image can be corrected by menu operation. (see pages 23, 35, 43
  • Sanyo PLC-XK2600 | Owner's Manual - Page 14
    using the COMPUTER IN 1/ S-VIDEO IN / COMPONENT IN and the COMPUTER IN 2/MONITOR OUT terminals as input. •When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available. •When the cable is of the longer variety, it is advisable to use the COMPUTER IN 1 /S-VIDEO IN/ COMPONENT
  • Sanyo PLC-XK2600 | Owner's Manual - Page 15
    -VGA Cable • Audio Cables (Cables are not supplied with the projector. ) Installation S-video Output Audio output MIC output S-video cable Audio . •When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available. •See page 72 for ordering optional cables. Unplug the power
  • Sanyo PLC-XK2600 | Owner's Manual - Page 16
    Equipment Cables used for connection • Audio Cables • Scart-VGA Cable • Component Cable • Component-VGA Cable (Cables are not supplied with this projector.) Audio Output RGB Scart 21- Component Video Output pin Output (Y, Pb/Cb, Pr/Cr) Audio cable (stereo) AUDIO IN Component cable ScartVGA
  • Sanyo PLC-XK2600 | Owner's Manual - Page 17
    electrical shock, do not plug into any other type of power system. If you are not sure of the type of power being supplied, consult your authorized dealer or service center. Connect the projector with all peripheral equipment before turning the projector on. Connect the AC power cord (supplied) to
  • Sanyo PLC-XK2600 | Owner's Manual - Page 18
    . And then follow the input signal guidance window to correct the signal and connection. If the projector is locked with a PIN code, PIN code input dialog box will appear. Enter the PIN code as instructed on the next page. 16 The preparation display will disappear after 30 seconds. Selected Input
  • Sanyo PLC-XK2600 | Owner's Manual - Page 19
    start to operate the projector. If you entered the projector. What is PIN code projector. Setting a PIN code prevents unauthorized use of the projector locking operation of the projector with your PIN box appeared, the projector will be turned your PIN code, the projector can no longer be started.
  • Sanyo PLC-XK2600 | Owner's Manual - Page 20
    , the fans stop immediately. The lamp remains high temperature and needs to be cooled. Note: • When the Direct on function is set to On, the projector will be turned on automatically by connecting the AC power cord to an AC outlet (p.49). • The running speed of cooling fans is changed according
  • Sanyo PLC-XK2600 | Owner's Manual - Page 21
    Operation How to Operate the On-Screen Menu The projector can be adjusted or set via the On-Screen into other submenus. For each adjustment and setting procedure, refer to respective sections in this manual. Top Control POINT buttons 1 Press the MENU button on the top control or the remote
  • Sanyo PLC-XK2600 | Owner's Manual - Page 22
    set configurations to the MIC functions (p.24). ⑦ Setting Used to set the projector's operating configurations (pp.44-56). ⑧ Information Display the input source information NO.. (p.57) ⑨ Network See owner's manual of "Network Set-up and Operation". ⑩ Guide The key operation is displayed. 22
  • Sanyo PLC-XK2600 | Owner's Manual - Page 23
    cannot be ensured with the Auto setup function. If the distortion cannot be corrected properly by pressing the AUTO SETUP or AUTO SET button, adjust manually by pressing the KEYSTONE button on the remote control or selecting Keystone in the Screen menu (pp.35,43). • Fine sync, Total dots, Horizontal
  • Sanyo PLC-XK2600 | Owner's Manual - Page 24
    Basic Operation Direct Operation Sound Adjustment Top Control Volume Press the VOLUME+/- buttons on the top control or on the remote control to adjust the volume. The volume dialog box appears on the screen for a few seconds. Mute Press the MUTE button on the remote control to select On to
  • Sanyo PLC-XK2600 | Owner's Manual - Page 25
    Basic Operation Remote Control Operation Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu. COMPUTER 1/2, VIDEO, S-VIDEO and COMPONENT buttons Press
  • Sanyo PLC-XK2600 | Owner's Manual - Page 26
    Basic Operation NO SHOW button Press the NO SHOW button on the remote control to black out the image. To restore to normal, press the NO SHOW button again or press any other button. When the projected image is captured and is set as User in the Logo selection (p. 46), the screen changes each time
  • Sanyo PLC-XK2600 | Owner's Manual - Page 27
    Computer Input Input Source Selection (RGB: Computer 1/Computer 2) Direct Operation Choose either Computer 1(RGB) or Computer 2(RGB) by pressing the COMPUTER 1 or COMPUTER 2 button on the remote control. Before using these buttons, correct input source should be selected through Menu operation as
  • Sanyo PLC-XK2600 | Owner's Manual - Page 28
    projector automatically tunes to various types of computers with its Multi-scan system and Auto PC Adjustment. If a computer is selected as a signal source, this projector your computer and the projector. (See "Troubleshooting" on p. 63.) Mode 1 The preset system is manually adjusted in the PC
  • Sanyo PLC-XK2600 | Owner's Manual - Page 29
    The adjusted parameters from the Auto PC Adjustment can be stored in the projector. Once the parameters are stored, the setting can be done just by function. When the image is not provided properly with this operation, manual adjustments are required (pp. 3031). • The Auto PC Adjustment cannot
  • Sanyo PLC-XK2600 | Owner's Manual - Page 30
    PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has five independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific computer. 1 Press the MENU button to display the On-Screen
  • Sanyo PLC-XK2600 | Owner's Manual - Page 31
    be selected when 480i, 575i, 480p, 575p, 720p, 1035i or 1080i is selected in the PC System Menu (p.28). • When input computer signal to the projector, PC adjust will become available. 31
  • Sanyo PLC-XK2600 | Owner's Manual - Page 32
    item and then press the SELECT button. IMAGE button Dynamic For viewing pictures in a bright room. Standard Normal picture mode preset on the projector. Real Picture mode with improved halftone for graphics. Cinema Picture mode adjusted with fine tone. Blackboard (Green) For the image projected on
  • Sanyo PLC-XK2600 | Owner's Manual - Page 33
    Computer Input Image Adjustment 1 Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Image adjust and then press the Point ► or the SELECT button. Image Adjust Menu 2 Use the Point ▲▼ buttons select the desired item and then press the SELECT button to
  • Sanyo PLC-XK2600 | Owner's Manual - Page 34
    size is larger or smaller than the screen size (1024 x 768), the projector enters to the panning mode automatically. Use the Point buttons to pan the aspect screen image. Custom adj. Adjust the screen scale and position manually with this function. Press the Point ► button at Custom adj. and
  • Sanyo PLC-XK2600 | Owner's Manual - Page 35
    is set to On, the picture will be top/ bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector. Rear When this function is set to On, the picture will be left/right reversed. This function is used to project the image from rear
  • Sanyo PLC-XK2600 | Owner's Manual - Page 36
    Video Input Input Source Selection (Video, S-video) Direct Operation Choose Video or S-video by pressing the VIDEO or the S-VIDEO button on the remote control. Before using these buttons, correct input source should be selected through menu operation as described below. Remote Control VIDEO
  • Sanyo PLC-XK2600 | Owner's Manual - Page 37
    Video Input Input Source Selection (Component, RGB Scart 21-pin) Direct Operation Choose Computer 1(Component) or Computer 1(Scart) by pressing the COMPONENT or the COMPUTER 1 button on the remote control. Before using these buttons, correct input source should be selected through Menu operation as
  • Sanyo PLC-XK2600 | Owner's Manual - Page 38
    system, and adjusts itself to optimize its performance. When Video System is PAL-M or PAL-N, select the system manually. PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC 4.43, PAL
  • Sanyo PLC-XK2600 | Owner's Manual - Page 39
    item and then press the SELECT button. IMAGE button Dynamic For viewing pictures in a bright room. Standard Normal picture mode preset on the projector. Real Picture mode with improved halftone for graphics. Cinema Picture mode adjusted with fine tone. Blackboard (Green) For the image projected on
  • Sanyo PLC-XK2600 | Owner's Manual - Page 40
    Video Input Image Adjustment 1 Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Image adjust and then press the Point ► or the SELECT button. Image Adjust Menu 2 Use the Point ▲▼ buttons select the desired item and then press the SELECT button to display
  • Sanyo PLC-XK2600 | Owner's Manual - Page 41
    options. Off.......... Disabled. L 1.......... For an active picture. L 2.......... For a still picture. Film........ For watching a film. With this function, the projector reproduces pictures faithful to the original film quality. Reset To reset the adjusted data, select Reset and press the SELECT
  • Sanyo PLC-XK2600 | Owner's Manual - Page 42
    Video Input Screen Size Adjustment This projector has the picture screen resize function, which Custom Provide the last stored aspect screen image. Custom adj. Adjust the screen scale and position manually with this function. Press the Point ► button at Custom adj. and the Custom adjustment menu
  • Sanyo PLC-XK2600 | Owner's Manual - Page 43
    is set to On, the picture will be top/ bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector. Ceiling Rear When this function is set to On, the picture will be left/right reversed. This function is used to project the image from
  • Sanyo PLC-XK2600 | Owner's Manual - Page 44
    Setting Setting This projector has a Setting menu that allows you to set up the other various functions described below. 1 Press the MENU button to display the On-Screen Menu.
  • Sanyo PLC-XK2600 | Owner's Manual - Page 45
    on the top control. Off Disables Auto PC Adjustment. Auto Keystone Auto . . . . . Always works and corrects keystone distortion according to the projector's tilt. Manual . . Works only when pressing the AUTO SETUP button on the top control or the AUTO SET button on the remote control. Off
  • Sanyo PLC-XK2600 | Owner's Manual - Page 46
    becomes bright enough. The factory default setting is in this option. Countdown Off....... Show the input image instead of the countdown when turning on the projector. Use this function when you want to project the image as early as possible even when the lamp is not bright enough. Off Hide the
  • Sanyo PLC-XK2600 | Owner's Manual - Page 47
    Then the captured image will be displayed the next time you turn on the projector or when you press the NO SHOW button. (see page 26) To cancel by the Keystone function, the adjusted data is automatically reset and the projector captures an image without keystone correction. • When Logo PIN code lock
  • Sanyo PLC-XK2600 | Owner's Manual - Page 48
    -digit number. After entering the four-digit number, move the pointer to Set. Press the SELECT button so that you can start to operate the projector. If you entered an incorrect Logo PIN code, Logo PIN code and the number will turn red for a moment. Enter the correct Logo PIN code
  • Sanyo PLC-XK2600 | Owner's Manual - Page 49
    ) Power management For reducing power consumption as well as maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not operated for a certain period. Select one of the following options: Ready When the lamp has been fully cooled down, the POWER
  • Sanyo PLC-XK2600 | Owner's Manual - Page 50
    is powered off. Eco Select Eco when you do not use the projector via network. The projector's network function will stop when turning off the projector, you can not turn on the projector via network. Refer to the owner's manual of "Network Set-up and Operation". Note: • When selecting Network, the
  • Sanyo PLC-XK2600 | Owner's Manual - Page 51
    Closed Caption Closed Caption is a printed version of the program sound or other information displayed on the screen. If the input signal contains closed captions, you can turn on the feature and switch the channels. Press t�h�e���P�o��in��t b��u�t�to��n�s��to��s��e�le��c�t Off, CC1, CC2, CC3 or
  • Sanyo PLC-XK2600 | Owner's Manual - Page 52
    for 5 seconds or more. After changing the code, make sure the remote control operates properly. Remote control Note: • When different codes are set on the projector and on the remote control, any operation cannot be made. In that case, switch the code on the remote control to fit the code on
  • Sanyo PLC-XK2600 | Owner's Manual - Page 53
    you purchased the projector or the service center. Key lock Setting PIN code lock This function prevents the projector from being operated box appears. When the projector is locked with the PIN code, the Security icon appears on the guide. PIN code lock When the projector is locked with the PIN
  • Sanyo PLC-XK2600 | Owner's Manual - Page 54
    new pin code in column of the pin code no. memo on page 75, and keep it securely. If you forget your PIN code, the projector can no longer be started. 54
  • Sanyo PLC-XK2600 | Owner's Manual - Page 55
    2,000 meters above the sea level where the fans have less cooling effect. On 2 Faster than On 1 mode. Select this mode when using the projector in higher altitudes (about 2,000 meters to 3,000 meters above the sea level where the fans have lesser cooling effect. Note: The fan noise becomes
  • Sanyo PLC-XK2600 | Owner's Manual - Page 56
    function is set to Off (p.46), during Freeze (p.25), or No show (p.26). Factory default Warning log This function records anomalous operations while the projector is in operation and use it when diagnosing faults. Up to 10 warning logs are displayed with the latest warning message at the top of
  • Sanyo PLC-XK2600 | Owner's Manual - Page 57
    the status of the image signal being projected and the operation of the projector. Direct Operation Press the INFO. button on the remote control to display NO. The serial number of the projector is displayed. The serial number is used to service the projector. Information Menu INFO. button 57
  • Sanyo PLC-XK2600 | Owner's Manual - Page 58
    cannot be turned on and the WARNING indicator still lights red, unplug the AC power cord and contact the service center. Top Control WARNING lights red CAUTION DO NOT LEAVE THE PROJECTOR WITH THE AC POWER CORD CONNECTED UNDER AN ABNORMAL CONDITION. IT MAY RESULT IN FIRE OR ELECTRIC SHOCK. 58
  • Sanyo PLC-XK2600 | Owner's Manual - Page 59
    , dust may accumulate on a lens, LCD panels, or optical elements inside the projector degrading the quality of a projected image. When the symptoms above are noticed, contact your authorized dealer or service center for proper cleaning. Lock Unlock Filter counter reset Note: • When replacing
  • Sanyo PLC-XK2600 | Owner's Manual - Page 60
    a knot in the string to secure it in place. 2 To pass the other end of the string into the hole on the bottom of the projector and pull at it. Cleaning the Projection Lens Unplug the AC power cord before cleaning. Gently wipe the projection lens with a cleaning cloth that contains
  • Sanyo PLC-XK2600 | Owner's Manual - Page 61
    to cool for at least 45 minutes before you open the Lamp Cover. The inside of the projector can become very hot. CAUTION For continued safety, replace with a lamp of the same type. Do not drop a lamp or touch a glass bulb! The glass can shatter and may cause injury. CAUTION When replacing
  • Sanyo PLC-XK2600 | Owner's Manual - Page 62
    projector : PLC-XK2200; PLC-XK2600 ● Replacement Lamp Type No.: POA-LMP142 (Service Parts No. 610 349 7518) LAMP HANDLING PRECAUTIONS This projector the projector has cooled down. (Follow carefully the instructions in the Lamp Replacement section of this manual.) Continuous
  • Sanyo PLC-XK2600 | Owner's Manual - Page 63
    Appendix Troubleshooting Before calling your dealer or service center for assistance, check the items below once again. - Make sure you have properly connected the projector to peripheral equipment as described on pages 14-16. - Make sure all equipment is connected to AC outlet and the power is
  • Sanyo PLC-XK2600 | Owner's Manual - Page 64
    signal is correctly output from your computer. Some laptop computers may need to change the setting for monitor output when connecting to a projector. See your computer's instruction manual for the setting. - It takes about 30 seconds to display an image after turning on the
  • Sanyo PLC-XK2600 | Owner's Manual - Page 65
    the Logo PIN code lock, Security key lock or Security PIN code lock. - Contact the dealer where you purchased the projector or the service center. appears on the screen - The projector detects an abnormal condition. Unplug the AC power cord and contact the dealer where you purchased the
  • Sanyo PLC-XK2600 | Owner's Manual - Page 66
    Appendix WARNING : High voltages are used to operate this projector. Do not attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Specify the model number and explain about the
  • Sanyo PLC-XK2600 | Owner's Manual - Page 67
    /On1/On2 Keystone Auto PC adj. On/Off Auto keystone Auto Manual Off Keystone Store Store/Reset Background Display Logo Ceiling Rear Terminal Blue /ECO Remote control Code 1-Code 2 Security Fan Fan control Key lock Off Projector Remote control PIN code lock Off/On1/On2 PIN code change L1/L2 Off
  • Sanyo PLC-XK2600 | Owner's Manual - Page 68
    Appendix Video Input System (2) System (3) Auto 1080i 1035i 720p 575p 480p 575i 480i Auto PAL SECAM NTSC NTSC 4.43 PAL-M PAL-N Image Adjust Contrast Brightness Color Tint Iris Color temp. Red Green Blue Sharpness Gamma Noise reduction Progressive Reset Store 0-63 0-63 0-63 0-63 Off/On XLow Low
  • Sanyo PLC-XK2600 | Owner's Manual - Page 69
    the AC power cord and plug it again to turn on the projector. If the projector is turned off again,  unplug the AC power cord and contact the dealer or the service center for service and checkup. Do not leave the projector on. It may cause an electric shock or a fire hazard. • • • green
  • Sanyo PLC-XK2600 | Owner's Manual - Page 70
    Appendix Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V-, H-Frequency mentioned below and less than 140 MHz of Dot Clock. When selecting these modes, PC
  • Sanyo PLC-XK2600 | Owner's Manual - Page 71
    Appendix Technical Specifications Mechanical Information Projector Type Multi-media Projector Dimensions (W x H x D) 13.13" x 3.98" x 9.72 �1�8�.�3�8��m��m 2�2�.�0�6��m��m� with manual zoom and focus 215 W Interface Video Input Jack RCA Type x 1 Audio Input Jack RCA Type x 2 Computer
  • Sanyo PLC-XK2600 | Owner's Manual - Page 72
    Appendix Accessories Owner's Manual (CD-ROM) Quick Reference Guide AC Power Cord Remote Control and Batteries VGA Cable Lens Cap with String PIN Code Label Ferrite core Filter Cover for Ceiling Mount ●���T�h�e��s�p�e�c�i�fi�c�a�t�io�n��s�a��
  • Sanyo PLC-XK2600 | Owner's Manual - Page 73
    projector supports all commands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1. For PJ Link password, see the owner's manual of "Network Set-up and Operation." Projector Attach the projector to the ceiling mount in accordance with the instruction manuals which
  • Sanyo PLC-XK2600 | Owner's Manual - Page 74
    Appendix Configurations of Terminals COMPUTER IN 1 / S-VIDEO IN/ COMPONENT IN Terminal: Analog RGB (Mini D-sub 15 pin) 54 32 1 10 9 8 7 6 15 14 13 12 11 1 Red/Cr/S-C Input 9 +5V Power 2 Green/Y/S-Y Input 10 Ground (Vert.sync.) 3 Blue/Cb/--- Input 11 Ground 4 ----- 12 DDC Data 5 Ground (
  • Sanyo PLC-XK2600 | Owner's Manual - Page 75
    Number Memo Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service center. PIN Code Lock No. Logo PIN Code Lock No. Factory default set No: 1 2 3 4* Factory default set
  • Sanyo PLC-XK2600 | Owner's Manual - Page 76
    Appendix Dimensions Unit: mm(inch) Screw Holes for Ceiling Mount Screw: M4 Depth: 12.0(0.47) 4.6(0.18) 80.2(3.16) 247.0(9.72) 138.0(5.43) 122.2(4.81) 114.0(4.49) 5.6(0.22) 2.9(0.11) 105.6(4.16) 24.0(0.94) 70.5(2.78) 24.5(0.96) 195.5(7.70) 71.7(2.82) 71.5(2.81) 322.1(12.68) 137.3(5.41)
  • Sanyo PLC-XK2600 | Owner's Manual - Page 77
    KS8AE
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
Owner’s Manual
Multimedia Projector
MODEL PLC-XK2200
PLC-XK2600
Network Supported
Wired LAN
Refer to the Owner's Manuals below
for details about network function.
Network Set-up and Operation