Sanyo PLC-XL50A Owner's Manual

Sanyo PLC-XL50A - 2000 Lumens Manual

Get Sanyo PLC-XL50A - 2000 Lumens PDF manuals and user guides
UPC - 086483076503
View all Sanyo PLC-XL50A manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo PLC-XL50A manual content summary:

  • Sanyo PLC-XL50A | Owner's Manual - Page 1
    Multimedia Projector MODEL PLC-XL50A Owner's Manual
  • Sanyo PLC-XL50A | Owner's Manual - Page 2
    for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. ◆Large Screen in Limited Space Short focus lens allows you to project large images from short distance
  • Sanyo PLC-XL50A | Owner's Manual - Page 3
    Setting 45 Maintenance and Cleaning 55 Warning Indicator 55 Cleaning the Air Filter 56 Resetting the Filter Counter 56 Cleaning the Projection Window 57 Cleaning the Projector Cabinet 57 Lamp Replacement 58 Lamp Replacement Counter 59 Appendix 60 Troubleshooting 60 Menu Tree
  • Sanyo PLC-XL50A | Owner's Manual - Page 4
    If the problem still persists, contact the dealer where you purchased the projector or the service center. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PART S I N S I D E E XC E P T LAMP REPLACEMENT. REFER
  • Sanyo PLC-XL50A | Owner's Manual - Page 5
    for cleaning. Follow all warnings and instructions marked on the projector. For added protection to the projector during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage due to lightning and power line
  • Sanyo PLC-XL50A | Owner's Manual - Page 6
    Safety Instructions Air Circulation Openings in the cabinet are provided for ventilation. This may cause damage to the projector. For information about transporting the projector by courier or any other transport service, consult your dealer. - Do not put the projector in a case before it is
  • Sanyo PLC-XL50A | Owner's Manual - Page 7
    Safety Instructions Installing the Projector in Proper Position 1-$9- Install the projector properly. Imఱp௻Γr༻o݀p̐Χeॴr‫ڞ‬I௨nstallation may reduce the lamp life and cause fire hazard. Side A Side B Side C Side D Side E CAUTION - Do not put anything or sit on the projector, otherwise
  • Sanyo PLC-XL50A | Owner's Manual - Page 8
    Number(s) Trade Name Responsible party Address Telephone No. : PLC-XL50A : Sanyo : SANYO FISHER COMPANY : 21605 Plummer Street, Chatsworth, California 91311 : (818)998-7322 AC Power Cord Requirement The AC Power Cord supplied with this projector meets the requirement for use in the country
  • Sanyo PLC-XL50A | Owner's Manual - Page 9
    Remote Receiver is put on the wall or floor directly, the Infrared Remote y Air Intake Vent u Terminals and Connectors i Power Cord Connector o Focus Lever !0 Projection Window ✔ Lamp Cover !3 Air Filter ✽Kensington Security Slot This slot is for a Kensington lock used to deter theft of the projector
  • Sanyo PLC-XL50A | Owner's Manual - Page 10
    21-pin video output to this terminal (pp.16, 18). When the cable is of the longer variety, it is advisable to use this terminal and not COMPUTER IN 2/MONITOR OUT. o SERVICE PORT This jack is used to service the projector. When controlling the projector with RS-232C, connect the control equipment to
  • Sanyo PLC-XL50A | Owner's Manual - Page 11
    of the projector exceeds the operating range (pp.55, 66). e WARNING FILTER indicator - Light orange when the clogging of the filter is detected or the filter counter reaches a time set in the timer setting, urging immediate filter/ filter cartridge replacement (pp.54, 66). r LAMP REPLACE indicator
  • Sanyo PLC-XL50A | Owner's Manual - Page 12
    ew q / r t y u CEILING i o !0 !1 12 q ON/STAND-BY button Turn the projector on or off (pp.20, turn off the image on the screen (p.26). !1 LAMP CONTROL button Select the lamp mode (pp.26, 50). !2 MUTE button Mute or heat. - For cleaning, use a soft dry cloth. Do not apply benzene, thinner,
  • Sanyo PLC-XL50A | Owner's Manual - Page 13
    control, carefully wipe the case clean and install new batteries. ● Risk of explosion if a battery is replaced by an incorrect type. ● Dispose of used batteries according to the instructions. Operating Range Point the remote control toward the projector (Infrared Remote Receiver) when pressing
  • Sanyo PLC-XL50A | Owner's Manual - Page 14
    from the actual sizes. Make sure to check the position of images by projecting images on the screen before installing the projector and screen, since each projector shows slight variations. •Make sure to project images on a flat screen. •Even slight warpage or irregularities of the screen may have
  • Sanyo PLC-XL50A | Owner's Manual - Page 15
    Mounting the Rear Leg Rear Leg 1 Turn off the projector and unplug the AC power cord. 2 Secure the rear leg with the four (4) screws. ✔Note: •Make sure not to lose screws when installing the rear leg. Installation Screw Rear leg 15
  • Sanyo PLC-XL50A | Owner's Manual - Page 16
    other cables are not supplied with the projector.) Audio Output Monitor Output or Monitor Input . •When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available. •When the power cords of both the projector and external equipment from the AC outlet before connecting the
  • Sanyo PLC-XL50A | Owner's Manual - Page 17
    Audio cable (stereo) ✔Note: •When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available. •The S-VIDEO jack connection overrides the VIDEO in the Input Menu (p.37). Unplug the power cords of both the projector and external equipment from the AC outlet before connecting the
  • Sanyo PLC-XL50A | Owner's Manual - Page 18
    IN 1 Audio cable (stereo) ✔Note: •When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available. •See page 69 for ordering optional cables. 18 Unplug the power cords of both the projector and external equipment from the AC outlet before connecting the cables. AUDIO OUT
  • Sanyo PLC-XL50A | Owner's Manual - Page 19
    the risk of electrical shock, do not plug into any other type of power system. If you are not sure of the type of power being supplied, consult your authorized dealer or service station. Connect the projector with all peripheral equipment before turning it on. Installation CAUTION The AC outlet
  • Sanyo PLC-XL50A | Owner's Manual - Page 20
    or service center. 20 16 The preparation display disappears after 30 seconds. Selected Input Source and Lamp Mode Lamp mode See page 50 for the Lamp mode. ✔Note: •The Lamp replacement icon and the Filter warning icon may appear on the screen depending on the usage state of the projector. PIN
  • Sanyo PLC-XL50A | Owner's Manual - Page 21
    or emits a red light, see "Warning Indicator" on page 55. •While the POWER indicator is blinking, the lamp is being cooled down and the projector cannot be turned on. Wait until the POWER indicator stops blinking to turn on the projector again. •The fan rotation will terminate directly if the AC
  • Sanyo PLC-XL50A | Owner's Manual - Page 22
    The projector can be adjusted or set via the On-Screen Menu. For each adjustment and setting procedure, refer to the respective sections in this manual. is not active until the SELECT button is pressed. SELECT button CEILING On-Screen Menu MENU button POINT buttons SELECT button MENU button POINT
  • Sanyo PLC-XL50A | Owner's Manual - Page 23
    -36). i Sound Menu Used to adjust the volume or mute the sound (p.25). o Setting Menu Used to set the projector's operating configurations (pp.45-54). For video source q w e r t yu i q Guide Window Shows the selected Menu of the On-Screen Menu. w Input Menu Used to select input source, Video or
  • Sanyo PLC-XL50A | Owner's Manual - Page 24
    screen positions. Screen position can not be adjusted at ZOOM maximum. Focus Adjustment Adjust the lens focus with the focus lever. Keystone Correction If a projected picture has keystone distortion, correct button POINT ed buttons / Remote Control KEYSTONE button POINT ed buttons CEILING 24
  • Sanyo PLC-XL50A | Owner's Manual - Page 25
    and then press the SELECT button. Volume Press the Point 8 button to turn up the volume; press the Point 7 button to turn down the volume. CEILING MUTE button Approximate level of the volume. Press the MUTE button to set the Mute function On or Off. The display disappears after 4 seconds. Sound
  • Sanyo PLC-XL50A | Owner's Manual - Page 26
    with the input signal Eco ...... Lower brightness reduces the lamp power consumption and extends the lamp life. Remote Control VOLUME +/buttons (See page 25.) AUTO PC button D.ZOOM buttons CEILING button NO SHOW button CEILING KEYSTONE button (See page 24.) POINT ed buttons IMAGE button
  • Sanyo PLC-XL50A | Owner's Manual - Page 27
    the SELECT button. 3 After the Source Select Menu appeared for Computer 1, move the pointer to RGB and then press the SELECT button. Input Menu CEILING Input Menu icon Move the pointer (red arrow) to Computer 1 and press the SELECT button. Computer 1 Source Select Menu Move the pointer to RGB
  • Sanyo PLC-XL50A | Owner's Manual - Page 28
    . ----- There is no signal input from computer. Check the connection between your computer and the projector. (See "Troubleshooting" on page 60.) Mode 1 The preset system is manually adjusted in the PC Adjust Menu. The adjusted data can be stored in Mode 1-5 (pp.30-31). SVGA 1 A PC System
  • Sanyo PLC-XL50A | Owner's Manual - Page 29
    PC button on the remote control. AUTO PC button CEILING Menu Operation Auto PC Adj. 1 Press the in the Auto PC Adjustment can be stored in the projector. Once parameters are stored, the setting can be is not provided properly with this operation, manual adjustments are required (pp.30-31). •
  • Sanyo PLC-XL50A | Owner's Manual - Page 30
    PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has five independent memory areas (Mode 1-5) to store those parameters manually adjusted, which allows you to recall the setting for a specific computer. 1 Press the MENU button to display
  • Sanyo PLC-XL50A | Owner's Manual - Page 31
    Input Display area H Use the Point 7 8 buttons to adjust the horizontal area displayed by this projector. Display area V Use the Point 7 8 buttons to adjust the vertical area displayed by this projector. Reset To reset the adjusted data, select "Reset" and press the SELECT button. A confirmation
  • Sanyo PLC-XL50A | Owner's Manual - Page 32
    pictures in a bright room. Standard Normal picture level preset on the projector. Real Picture level with improved halftone for graphics. Blackboard (Green) wall color from the preset four colors. See the next page. Image 1-4 User preset image in the Image Adjust Menu (p.35). Remote Control CEILING
  • Sanyo PLC-XL50A | Owner's Manual - Page 33
    in a bright room. Standard Normal picture level preset on this projector. Real Picture level with improved halftone for graphics. Blackboard(Green) the similar color to the wall color from the preset four colors. Press the SELECT button to choose the color. Image 1-4 User preset image in the Image
  • Sanyo PLC-XL50A | Owner's Manual - Page 34
    Computer Input Image Level Adjustment 1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Adjust Menu icon. 2 Use the Point ed buttons to move the red frame pointer to the desired item, and then press the SELECT button. The
  • Sanyo PLC-XL50A | Owner's Manual - Page 35
    be used to provide the squeezed video signal at 16:9. Full Provide the full screen image. ✔Note: •The Screen Menu, except for "Normal", cannot be operated when 720p, 1035i, or 1080i is selected in the PC System Menu (p.28). •This projector cannot display any resolution higher than 1600 x 1200. If
  • Sanyo PLC-XL50A | Owner's Manual - Page 36
    input source from the Input Source Selection (p.27) again, or adjust the screen size with the D.ZOOM ed buttons. / Remote Control POINT buttons CEILING SELECT button D.ZOOM + button D.ZOOM - button ✔Note: •The panning function may not operate properly if the stored Mode in the PC Adjust Menu
  • Sanyo PLC-XL50A | Owner's Manual - Page 37
    desired source and then press the SELECT button. Auto When selecting "Auto," the projector automatically detects the incoming video signal, and adjusts itself to optimize its performance. The projector selects connection in the following order: 1. Component 2. S-Video 3. Video Video When the
  • Sanyo PLC-XL50A | Owner's Manual - Page 38
    Video Input Input Source Selection (RGB Scart 21-pin) Direct Operation Press the INPUT button on the top control or COMPUTER button on the remote control to select Computer 1. Before using INPUT or COMPUTER buttons, select the correct input source through Menu operation as described below. Top
  • Sanyo PLC-XL50A | Owner's Manual - Page 39
    system, and adjusts itself to optimize its performance. When Video System is PAL-M or PAL-N, select the system manually. PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC 4.43, PAL
  • Sanyo PLC-XL50A | Owner's Manual - Page 40
    in a bright room. Standard Normal picture level preset on this projector. Cinema Picture level adjusted for the picture with fine tone. Blackboard wall color from the preset four colors. See the next page. Image 1-4 User preset image in the Image Adjust Menu (pp.42-43). Remote Control CEILING
  • Sanyo PLC-XL50A | Owner's Manual - Page 41
    in a bright room. Standard Normal picture level preset on this projector. Cinema Picture level adjusted for the picture with fine tone. Blackboard the similar color to the wall color from the preset four colors. Press the SELECT button to choose the color. Image1-4 User preset image in the Image
  • Sanyo PLC-XL50A | Owner's Manual - Page 42
    Video Input Image Level Adjustment 1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Adjust Menu icon. 2 Use the Point ed buttons to move the red frame pointer to the desired item and then press the SELECT button. The level
  • Sanyo PLC-XL50A | Owner's Manual - Page 43
    options. Off.........Disabled. L1......... For an active picture. L2......... For a still picture. Film......  F or watching a film. With this function, the projector reproduces pictures faithful to the original film quality. Reset To reset the adjusted data, select Reset and press the SELECT
  • Sanyo PLC-XL50A | Owner's Manual - Page 44
    Video Input Screen Size Adjustment This projector has the picture screen resize function, which enables you to customize the press the SELECT button. Wide Provide the image at a wide screen ratio of 16:9. ✔Note: •Wide is not available when 720p, 1035i, or 1080i is selected in the AV System Menu (p.
  • Sanyo PLC-XL50A | Owner's Manual - Page 45
    cord is unplugged. Store 2......S tore the Zoom setting even when the AC power cord is unplugged. Reset........R eset the Zoom adjustment when the projector is turned off or the AC power cord is unplugged. Keystone This function corrects distortion of a projected image. Select either Store or
  • Sanyo PLC-XL50A | Owner's Manual - Page 46
    when turning on the projector. Use this function when you want to project the image as early as possible even when the lamp is not bright enough. Off D o not show the On-Screen Displays. except: ● On-Screen Menu ● "Power off?" ● P-Timer ● "No signal" for Power management
  • Sanyo PLC-XL50A | Owner's Manual - Page 47
    to the Logo select function and set it to "User." Then the captured image is displayed when the projector is turned on next time or the NO SHOW (pp.3233, 40-41). •A signal from a computer can be captured up to XGA(1024x 768). A signal from video equipment can be captured except for 720p, 1035i,
  • Sanyo PLC-XL50A | Owner's Manual - Page 48
    hand. If you lost the number, you could no longer change the Logo PIN code setting. For details on PIN code setting, refer to relevant instructions of the PIN code lock function on pages 52-53. CAUTION: when you have changed THE LOGO PIn code, write down the new pin code
  • Sanyo PLC-XL50A | Owner's Manual - Page 49
    /right reversed. This function is used to project the image from a ceiling-mounted projector. Rear When this function is set to "On," the picture is While Input search is set On1 or On2, the status of Input and Lamp are displayed every time the signal is switched. • Only the input source selected
  • Sanyo PLC-XL50A | Owner's Manual - Page 50
    cord to an outlet. ✔Note: •Be sure to turn the projector off properly (see "Turning Off the Projector" on page 21). If the projector is turned off in the incorrect sequence, the On start function does not operate properly. Power management Time left before Lamp is off. Press the SELECT button at
  • Sanyo PLC-XL50A | Owner's Manual - Page 51
    control operates properly. ✔Note: •When different codes are set on the projector and on the remote control, any operation cannot be made. In that case your remote control, contact the dealer where you purchased the projector or the service center. Select Key lock. Use the Point ed buttons to choose
  • Sanyo PLC-XL50A | Owner's Manual - Page 52
    code. On1......Requires to enter a PIN code every time turning on the projector. On2......Requires to enter a PIN code to operate the projector once the power cord is unplugged; as long as the AC power cord is connected, the projector can be operated without a PIN code. Whenever you change the PIN
  • Sanyo PLC-XL50A | Owner's Manual - Page 53
    new pin code in column of the pin code no. memo on page 74, and keep it securely. If you forget your PIN code, the projector can no longer be started. Fan This function provides the following options in the cooling fans' operation after turning off the
  • Sanyo PLC-XL50A | Owner's Manual - Page 54
    •The Lamp replacement icon will not appear when the Display function is set to "Off" (p.46), during "Freeze" (p.25), or "No show" (p.26). Filter counter This function is used to set a frequency for the filter cleaning. When the projector reached a specified time between cleanings, a Filter warning
  • Sanyo PLC-XL50A | Owner's Manual - Page 55
    projector away from the duct or vent. - Are the air filters clean? Clean the air filters periodically. (p.56) The projector is shut down and the WARNING TEMP. indicator lights red. When the projector power cord and contact the service station. CAUTION DO NOT LEAVE THE PROJECTOR WITH THE AC POWER
  • Sanyo PLC-XL50A | Owner's Manual - Page 56
    LCD panels, or optical elements inside the projector degrading the quality of a projected image. When the symptoms above are noticed, contact your authorized dealer or service station for proper cleaning. Resetting the Filter Counter Be sure to reset the Filter counter after cleaning or replacing
  • Sanyo PLC-XL50A | Owner's Manual - Page 57
    cleaners, solvents, or other harsh chemical cleaners to avoid damaging the projection window. Cleaning the Projector Cabinet Unplug the AC power cord before cleaning. Gently wipe the projector body with a soft dry cleaning cloth. When it is heavily soiled, use a small amount of mild detergent and
  • Sanyo PLC-XL50A | Owner's Manual - Page 58
    to avoid damaging it. Lamp ORDER REPLACEMENT LAMP Replacement lamp can be ordered through your dealer. When ordering a projection lamp, give the following information to the dealer. ● Model No. of your projector ● Replacement Lamp Type No. : PLC-XL50A : POA-LMP139 (Service Parts No. 610
  • Sanyo PLC-XL50A | Owner's Manual - Page 59
    should be replaced, i.e., if the LAMP REPLACE indicator lights up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down. (Follow carefully the instructions in the Lamp Replacement section of this manual.) Continuous use of the lamp with the LAMP REPLACE indicator lighted
  • Sanyo PLC-XL50A | Owner's Manual - Page 60
    appears. An icon other than Input mode or Lamp mode icon appears. - That is the Lamp replacement icon or the Filter warning icon. See page 54. No image - Check the connection between your computer or video equipment and the projector (see pages 16-18). - See if the input signal is correctly
  • Sanyo PLC-XL50A | Owner's Manual - Page 61
    the Lamp replace indicator. If it lights, the end of lamp life is approaching. Replace the lamp with a new one promptly. (See page 58) - Check the Input signal, color system, video system, or computer system mode. - Adjust the Image Level properly. See pages 32-33, 40-41. - Check the Ceiling/Rear
  • Sanyo PLC-XL50A | Owner's Manual - Page 62
    center. WARNING : High voltages are used to operate this projector. Do not attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Specify the model number and explain about the
  • Sanyo PLC-XL50A | Owner's Manual - Page 63
    Appendix Menu Tree Computer Input/Video Input Input Computer 1 Computer 2 Video Sound Sound Volume Mute Quit RGB RGB( Scart ) Quit Go to System (1) Auto Video S-Video Component Quit 0 - 63 On / Off Go to System (1) N/A Go to System (2) or (3) Go to System (3) Go to System (3) Go to System
  • Sanyo PLC-XL50A | Owner's Manual - Page 64
    Zoom 16 languages Ceiling On / Off Rear On / Off Terminal Input Search Computer 2 /Monitor out On1/On2/ Off Power management Off Ready Shut down Timer(1-30 Min) Quit On start On / Off Lamp control Normal / Auto / Eco Remote control Code 1 / Code 2 Security Key lock Off Projector
  • Sanyo PLC-XL50A | Owner's Manual - Page 65
    red/green WARNING TEMP. red WARNING FILTER orange LAMP REPLACE yellow Projector Condition The projector is off. (The AC power cord is unplugged.) ✽ The projector is preparing for stand-by or the projection lamp is ✽ being cooled down. The projector cannot be turned on until cooling is red
  • Sanyo PLC-XL50A | Owner's Manual - Page 66
    the AC power cord and contact the dealer or the service center for service and checkup. Do not leave the projector on. It may cause an electric shock or a fire hazard. ✽ ✽ The Filter counter reached a set time. Clean or replace the filter as soon as possible. LAMP REPLACE When the projection
  • Sanyo PLC-XL50A | Owner's Manual - Page 67
    Appendix Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V-, H-Frequency mentioned below and less than 91.146 63.979 65.346 65.121 68.68 75.00 80.00 48.36 47.70 48.36 56.16 47.776 60.289 68.633 49.600 75.00 81.25 87.5 93.75 45.00 33.75 33
  • Sanyo PLC-XL50A | Owner's Manual - Page 68
    Projector 14.72" x 7.75" x 19.49" (374 mm x 196.8 mm x 495 mm) (Not including Rear leg) 15.9 lbs (7.2 kg) 0˚ to 1.0˚ Panel Resolution LCD Lens Distance (Screen - Projector) Projection Lamp Adjustable from 60" to 80" F 1.85 lens with f 4.83 mm with manual mm) Power Voltage and Power Consumption AC
  • Sanyo PLC-XL50A | Owner's Manual - Page 69
    Accessories Owner's Manual(CD-ROM) Quick Reference Guide AC Power Cord Remote Control and Batteries VGA Cable PIN Code Label Appendix ●The specifications are subject to change without notice. ●LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are
  • Sanyo PLC-XL50A | Owner's Manual - Page 70
    8 Ground (Blue) SERVICE PORT CONNECTOR Terminal : Ceiling Mount Screw: M4 Depth: 0.393 (10.0) 16.73 (425) 16.59 (421.5) 19.49 (495) 9.37 (238) 5.0 (127) 0.63 (16) 4.61 (117) 7.17 (182) 1.0° 1.0° 7.91 (201) 70 0.33 (8.5) 4.29 (109) 8.58 (218) 14.72 (374) Lens center 4.50 (114.3) 0.63 (16
  • Sanyo PLC-XL50A | Owner's Manual - Page 71
    Code Number Memo Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. PIN Code Lock No. Factory default set No: 1 2 3 4* Logo PIN Code Lock No. Factory default set
  • Sanyo PLC-XL50A | Owner's Manual - Page 72
    KM3AB SANYO Electric Co., Ltd.
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
Multimedia Projector
MODEL
PLC-XL50A
Owner’s Manual