Sanyo PLC-XL50A RS232 Expand

Sanyo PLC-XL50A - 2000 Lumens Manual

Get Sanyo PLC-XL50A - 2000 Lumens PDF manuals and user guides
UPC - 086483076503
View all Sanyo PLC-XL50A manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo PLC-XL50A manual content summary:

  • Sanyo PLC-XL50A | RS232 Expand - Page 1
    EXPAND SERIAL COMMAND FUNCTIONAL SPECIFICATIONS PLC-XL50/A Ver. 1.00 1/51
  • Sanyo PLC-XL50A | RS232 Expand - Page 2
    PLC-XL50 Expand Serial Command Functional Specifications CONTENTS 1. OverView ...7 2. Serial Table 11 6.5 Screen Status Read Command Table 11 6.6 Lamp Status Read Command Table 12 6.7 Sound Status Read Command CF_TINT Command 16 8.4.5 CF_SHARP Command 16 8.4.6 CF_GAMMA Command 16 8.4.7 CF_WBAL
  • Sanyo PLC-XL50A | RS232 Expand - Page 3
    PLC-XL50 Expand Serial Command Functional Specifications 8.4.10 CF_NZRED Command 18 8.4.11 CF_IMAGE Command 24 8.7.2 CF_DZCENT Command 24 8.7.3 CF_KEYSTONE Command 24 8.7.4 CF_KYSTNMODE Command 24 8.8 Lamp Command ...25 8.8.1 CF_LAMPH Command 25 8.8.2 CF_LAMPMODE Command 25 8.9 Sound Command
  • Sanyo PLC-XL50A | RS232 Expand - Page 4
    PLC-XL50 Expand Serial Command Functional Specifications 8.10.11 CF_P - MANE Command 29 8.10.12 CF_P - MANETIME Command 30 8.10.13 CF_FANSPEED Command 30 8.10.14 CF_KEYDIS Command 30 8.10.15 CF_TERMINAL Command 30 8.10.16 CF_FDEFAULT Command 30 8.10.17 CF_LOGOCAPTURE Command 31 8.10.18
  • Sanyo PLC-XL50A | RS232 Expand - Page 5
    PLC-XL50 Expand Serial Command Functional CR_TRUE Command 43 9.8.4 CR_ KYSTNMODE Command 43 9.9 Lamp Status Read Command 44 9.9.1 CR_LAMPREPL Command 44 9.11.14 CR_TERMINAL Command 48 9.11.15 CR_FANMODE Command 49 9.11.16 CR_UNIFORMITY Command 49 9.11.17 CR_FILH Command 49 9.11.18 CR_FILREPL
  • Sanyo PLC-XL50A | RS232 Expand - Page 6
    PLC-XL50 Expand Serial Command Functional Specifications 9.12.1 9.12.2 9.12.3 9.12.4 9.12.5 9.12.6 CR_SIGNAL Command 50 CR_VMUTE Command 50 CR_FREEZE Command 50 CR_PTIMER Command 50 CR_TEMPWARN Command 50 CR_TEMPFAIL Command 51 6/51
  • Sanyo PLC-XL50A | RS232 Expand - Page 7
    communication functions for PLC-XL50. 1.2 Compatible to Firmware Ver. 1.x of the projector. 2. Serial Interface Speed can be changed in service mode. 2.2 Connection Dedicated serial cable must be used for a connection to a computer and a projector. PC COM 1 Projector Control Port (D-Sub 9 Pin
  • Sanyo PLC-XL50A | RS232 Expand - Page 8
    PLC-XL50 Expand Serial Command Functional Specifications 3. Notes for communication 3.1 Expand Serial power. During this time it cannot process commands. Do not issue any command. 4. Name Definition 4.1 Data from a controller to a projector is represented as COMMAND, and data from a projector
  • Sanyo PLC-XL50A | RS232 Expand - Page 9
    PLC-XL50 Expand Serial Command Functional Specifications 5. Functional Execution Command Table 5.1 Image Command Table Execute command CF_BRIGHT_%1[CR] CF_CONT_%1[CR] CF_COLOR_%1[CR] CF_TINT_%1[CR] CF_SHARP_%1[CR] CF_GAMMA_%1[
  • Sanyo PLC-XL50A | RS232 Expand - Page 10
    Power ON Start function Set Power management function Set Power management time Select Fan Speed Prohibit RC/KEY Set Terminal terminal Set the value to Factory Default Capture a projected image Select Fan mode Set Uniformity function. Set Timer for Filter cleaning/replacement Warning. Reset Filter
  • Sanyo PLC-XL50A | RS232 Expand - Page 11
    PLC-XL50 Expand Serial Command Functional Specifications 6. Status Read Command Table 6.1 Image Status Read Command Table Status read command CR_BRIGHT[CR] CR_CONT[CR] CR_COLOR[CR] CR_TINT[CR]
  • Sanyo PLC-XL50A | RS232 Expand - Page 12
    PLC-XL50 Expand Serial Command Functional Specifications 6.6 Lamp Status Read Command Table Status read command CR_LAMPREPL[CR] CR_LAMPMODE[CR] CR_PROJH[CR] Item Get the information for Lamp replacement time Get Lamp Mode status Get projector total running time 6.7 Sound Status Read Command
  • Sanyo PLC-XL50A | RS232 Expand - Page 13
    PLC-XL50 Expand Serial Command Functional Specifications 7. Error Code Table Error Code ? 000 Contents -When the received data cannot be decoded -Parameter determination error (digit number error,
  • Sanyo PLC-XL50A | RS232 Expand - Page 14
    PLC-XL50 Expand Serial Command Functional POWER ON C00: POWER ON (Terminates Countdown) C01: POWER OFF C02: POWER OFF (Terminates Countdown) N/A N/A N/A N/A N/A C00: POWER ON C01: POWER OFF Input search does not operate while receiving INPUT command nor related commands. Note:) When the projector
  • Sanyo PLC-XL50A | RS232 Expand - Page 15
    PLC-XL50 Details Set Color value of user control The value set by this command will not be saved to the projector. Therefore, when ALL is OFF, the value returns to the original setting. (The value is held in Suspend mode) This command is available in the normal Power
  • Sanyo PLC-XL50A | RS232 Expand - Page 16
    PLC-XL50 Expand Serial Command Functional Specifications 8.4.4 CF_TINT Command Command "CF_TINT_%1"[CR] "000~063 Directly select Tint setting value %1 "UP Current Tint setting value + 1 "DN Current Tint setting value - 1 Details Set Tint value of user control The value set by this command
  • Sanyo PLC-XL50A | RS232 Expand - Page 17
    PLC-XL50 Expand Serial Color value set by White Balance%1 of user control The value set by this command will not be saved to the projector. Therefore, when ALL is OFF, Available only in the normal Power ON status) The value set by this command will not be saved to the projector. Therefore, when ALL
  • Sanyo PLC-XL50A | RS232 Expand - Page 18
    PLC-XL50 Expand Serial Command Functional Specifications 8.4.10 CF_NZRED Command Command "CF_NZRED_%1"[CR] "OFF" ------- Cancel Noise Reduction %1 "L1" --------- Noise Reduction for moving image "L2" --------- Noise Reduction for still image Details Set Noise Reduction of User control The
  • Sanyo PLC-XL50A | RS232 Expand - Page 19
    PLC-XL50 Expand Serial Command Functional Specifications 8.5 PC Adjust Control Command 8.5.1 CF_FSYNC Command Sync value of PC signal (Available only in the normal Power ON status) The value set by this command will not be saved to the projector. Therefore, when ALL is OFF, the value returns to
  • Sanyo PLC-XL50A | RS232 Expand - Page 20
    PLC-XL50 Expand Serial Command Functional Specifications 8.5.4 CF_H - POS Command Command "CF_H will not be saved to the projector. Therefore, when ALL is OFF, the value returns to the original setting. This command is available in the normal Power ON status. Response Acceptable Unacceptable "
  • Sanyo PLC-XL50A | RS232 Expand - Page 21
    PLC-XL50 Expand Serial Command Functional Specifications 8.5.7 CF_DLINE Command Command "CF_DLINE_%1"[CR] "0100~ Line value of PC signal (Available only in the normal Power ON status) The value set by this command will not be saved to the projector. Therefore, when ALL is OFF, the value returns to
  • Sanyo PLC-XL50A | RS232 Expand - Page 22
    PLC-XL50 Expand Serial Command Functional Specifications 8.6 Input Control Command 8.6.1 CF_INPUT Command (Network mode is selected Input (Available only in the normal Power ON status) When Input specified by %1 is inappropriate for selected Input, the projector returns "101" and this command is
  • Sanyo PLC-XL50A | RS232 Expand - Page 23
    PLC-XL50 Expand Serial Command Functional Specifications Unacceptable "Error Code"[CR] 8.6.4 of currently selected Input (Available only in the normal Power ON status) When Input specified by %1 is inappropriate for selected Input, the projector returns "101"[CR] and the command is not executed
  • Sanyo PLC-XL50A | RS232 Expand - Page 24
    PLC-XL50 Expand Serial Command Functional Specifications 8.7 Screen Control Command 8.7.1 CF_SCREEN Command Select screen size (Available only in the normal Power ON status) When Input specified by %1 is inappropriate for selected Input, the projector returns "101"[CR] and the command is not
  • Sanyo PLC-XL50A | RS232 Expand - Page 25
    PLC-XL50 Expand Serial Command Functional Specifications 8.8 Lamp Command 8.8.1 CF_LAMPH Command Command "CF_LAMPH_%1"[CR] %1 "RST" Details Reset lamp total running time (Available only in the normal Power ON status) Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.8.2
  • Sanyo PLC-XL50A | RS232 Expand - Page 26
    PLC-XL50 Expand Serial Command -1 Details Set Volume value (Available only in the normal Power ON status) The same operation as Volume Up/Down with RC like RC operation. The value set by this command is stored in Projector. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.9.2 CF_MUTE
  • Sanyo PLC-XL50A | RS232 Expand - Page 27
    , Projector returns error code "101" by receiving "User" Response Acceptable Unacceptable "000"[CR] "Error Code"[CR] "101" --------- When Logo is locked by Logo PIN code 8.10.4 CF_CEIL Command Command "CF_CEIL_%1"[CR] %1 "ON Select Ceiling "OFF Cancel Ceiling Details Set / Cancel Ceiling
  • Sanyo PLC-XL50A | RS232 Expand - Page 28
    PLC-XL50 Expand Serial Command Functional Specifications 8.10.5 CF_REAR Command Command "CF_REAR_%1"[CR] %1 "ON Select Rear "OFF Cancel Rear Details Set/Cancel Rear (Available only in the normal Power ON status) When Rear is ON, image is left/right reversed. The status set by this command is
  • Sanyo PLC-XL50A | RS232 Expand - Page 29
    PLC-XL50 Expand Serial Command Functional Specifications 8.10.8 CF_ZOOM Command Command "CF_ZOOM_ Input search On1 Set Input search On2 Details Set Input search mode (Available only in the normal Power ON status). The status set by this command is stored in EEPROM and its setting is effective
  • Sanyo PLC-XL50A | RS232 Expand - Page 30
    101" and the command is not executed 8.10.16 CF_FDEFAULT Command Command "CF_FDEFAULT_%1"[CR] %1 "RST" Details Set the value to Factory Default (Available only in the normal Power ON status) The same operation as Factory Default of user menu. Acceptable "000"[CR] Response Unacceptable "Error
  • Sanyo PLC-XL50A | RS232 Expand - Page 31
    PLC-XL50 Expand Serial Command Functional Specifications 8.10.17 CF_LOGOCAPTURE Command Command "CF_LOGOCAPTURE_%1"[CR] %1 "START Capture ON Details Capture projected image on screen. Once Projector in the normal Power ON status) The Filter warning display. Acceptable "000"[CR] Response Unacceptable "Error
  • Sanyo PLC-XL50A | RS232 Expand - Page 32
    PLC-XL50 Expand Serial Command Functional Specifications 8.10.21 CF_FANMODE Command Command "CF_FILH_%1"[CR] %1 "RST Reset Filter use time Details Reset Projector Filter use time Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 32/51
  • Sanyo PLC-XL50A | RS232 Expand - Page 33
    PLC-XL50 Expand Serial Command Functional Specifications 9. Status Read Command 9.1 Format 1) PC issues commands in format as below: "CR_Command" [CR] Command : Character Line 2) When projector receives the appropriate command, it returns a character line as the required data "000 "%1 [CR] %1:
  • Sanyo PLC-XL50A | RS232 Expand - Page 34
    PLC-XL50 Expand Serial Command Functional Specifications 9.4 Image Status Read Command 9.4.1 CR_BRIGHT Command Command "CR_BRIGHT"[CR] Details Get Brightness value of user control Acceptable Response %a "000_ "[CR] "000"~"063" Unacceptable "?"[CR] 9.4.2 CR_CONT Command Command "CR_CONT"[
  • Sanyo PLC-XL50A | RS232 Expand - Page 35
    PLC-XL50 Expand Serial Command Functional Specifications 9.4.6 CR_GAMMA Command Command "CR_GAMMA"[CR] Details Get Gamma value of user control Response Acceptable %a "000_%a"[CR] "000"~"015" Unacceptable "?"[CR] 9.4.7 CR_WBAL - R Command Command "CR_WBAL-R"[CR] Details Get White Balance
  • Sanyo PLC-XL50A | RS232 Expand - Page 36
    PLC-XL50 Expand Serial Command Functional Specifications 9.4.11 CR_NZRED Command Command "CR_NZRED"[CR] Details Get Noise Reduction setting status Acceptable "000_%1"[CR] "L1" -------- Set Noise Reduction for
  • Sanyo PLC-XL50A | RS232 Expand - Page 37
    PLC-XL50 Expand Serial Command Functional Specifications 9.5 PC Adjust Status Read Command 9.5.1 CR_FSYNC Command Command "CR_FSYNC"[CR] Details Get Fine Sync value Acceptable "000_%a"[CR] Response %a Unacceptable "
  • Sanyo PLC-XL50A | RS232 Expand - Page 38
    PLC-XL50 Expand Serial Command Functional Specifications 9.5.5 CR_V - POS Command Command "CR_V - POS"[CR] Details Get Vertical Position value Acceptable "000_%a"[CR] Response %a Unacceptable "0000"~"nnnn" (nnnn =
  • Sanyo PLC-XL50A | RS232 Expand - Page 39
    PLC-XL50 Expand Serial Command Functional Specifications 9.5.9 CR_SETPCADJ Command Command "CR_SETPCADJ"[CR] Details Get PC signal for current system Acceptable "000_%1"[CR] "XGA1" Response %1 "1080I60", "720P" "MODE1"~"MODE5" ...Etc. Unacceptable "?"[CR] 39/51
  • Sanyo PLC-XL50A | RS232 Expand - Page 40
    PLC-XL50 Expand Serial Command Functional Specifications 9.6 Video Status Read Command 9.6.1 CR_SERSYS Command Command "CR_SERSYS"[CR] Details Get current selected signal Returns auto-detect result in Auto
  • Sanyo PLC-XL50A | RS232 Expand - Page 41
    PLC-XL50 Expand Serial Command Functional Specifications 9.7 Input Status Read Command 9.7.1 CR_INPUT Command Command "CR_INPUT"[CR] Details Get selected INPUT No. Acceptable "000_%a"[CR] "COMPUTER1" ------- Computer1 Input
  • Sanyo PLC-XL50A | RS232 Expand - Page 42
    PLC-XL50 Expand Serial Command Functional Specifications 9.7.4 CR_SYSTEM Command Command "CR_SYSTEM"[CR] Details Get selected System Acceptable "000_%1"[CR] Input is PC Returns "101" Response %1 Input is
  • Sanyo PLC-XL50A | RS232 Expand - Page 43
    PLC-XL50 Expand Serial Command Functional Specifications 9.8 Screen Status Read Command 9.8.1 CR_SCREEN Command Command "CR_SCREEN"[CR] Details Get selected screen image size Acceptable "000_%a"[CR] "NORMAL Normal
  • Sanyo PLC-XL50A | RS232 Expand - Page 44
    PLC-XL50 Expand Serial Command Functional Specifications 9.9 Lamp Status Read Command 9.9.1 CR_LAMPREPL Command Command "CR_LAMPREPL"[CR] Details Get the information of Lamp Replacement time Acceptable "000_%1"[CR] "1Y Over lamp replacement time "1N Within lamp replacement time Response %1 "1"
  • Sanyo PLC-XL50A | RS232 Expand - Page 45
    PLC-XL50 Expand Serial Command Functional Specifications 9.10 Sound Status Read Command 9.10.1 CR_VOLUME Command Command "CR_VOLUME"[CR] Details Get Volume value of user control Response Acceptable %a "000_%a"[CR] "000"~"063" Unacceptable "?"[CR] 9.10.2 CR_MUTE Command Command "CR_MUTE"[CR
  • Sanyo PLC-XL50A | RS232 Expand - Page 46
    PLC-XL50 Expand Serial Command Functional Specifications 9.11 Setting Status Read "DEFAULT Default Logo is selected "USER User Logo is selected Unacceptable "?"[CR] 9.11.4 CR_CEIL Command Command "CR_CEIL"[CR] Details Get selected Ceiling status Acceptable "000_%1"[CR] Response %1
  • Sanyo PLC-XL50A | RS232 Expand - Page 47
    PLC-XL50 Expand Serial Command Functional Specifications 9.11.6 CR_RCODE Command Command "CR_RCODE"[CR] Details Get selected Remote Control Code status Acceptable "000_%a"[CR] Response %a "001 Code1 is
  • Sanyo PLC-XL50A | RS232 Expand - Page 48
    PLC-XL50 Expand Serial Command Functional Specifications 9.11.10 CR_ON-STA Command Command "CR_ON-STA"[CR] Details Get Power ON Start setting status Acceptable "000_%a"[CR] Response %a "ON Power ON Start is ON "OFF Power ON Start is OFF Unacceptable "?"[CR] 9.11.11 CR_P-MANE Command
  • Sanyo PLC-XL50A | RS232 Expand - Page 49
    PLC-XL50 Expand Serial Command Functional Specifications 9.11.15 CR_FANMODE Command Command "CR_FANMODE"[CR] Details Get selected Fan mode Acceptable "000_%a"[CR] Response %a "L1 Fan mode L1 "L2 Fan mode L2 Unacceptable "?"[CR] 9.11.16 CR_UNIFORMITY Command Command "CR_UNIFORMITY[CR]
  • Sanyo PLC-XL50A | RS232 Expand - Page 50
    PLC-XL50 Expand Serial "000_%a"[CR] Response %a "ON No Show is ON, Display User Logo (My picture) "OFF" --------- No Show is OFF Unacceptable Command Command "CR_TEMPWARN"[CR] Details Get the temperature inside a projector if it is abnormal temperature or close to abnormal temperature It
  • Sanyo PLC-XL50A | RS232 Expand - Page 51
    PLC-XL50 Expand Serial Command Functional Specifications %a Sensor 1 status %b Sensor 2 status %c Sensor 3 status abnormal. When the temperature is safe, all data are represented as "□000S". When the projector is reset, "□000S" is set, and every time abnormal temperature occurs, it renews the
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
1/51
EXPAND SERIAL COMMAND
FUNCTIONAL SPECIFICATIONS
PLC-XL50/A
Ver. 1.00