Sanyo PLC-XM100/L RS232C Basic
Sanyo PLC-XM100/L - 5000 Lumens Manual
 |
View all Sanyo PLC-XM100/L manuals
Add to My Manuals
Save this manual to your list of manuals |
Sanyo PLC-XM100/L manual content summary:
- Sanyo PLC-XM100/L | RS232C Basic - Page 1
BASIC SERIAL COMMAND FUNCTIONAL SPECIFICATIONS PLC-XM100 PLC-XM150 PLC-XM100L PLC-XM150L Ver.1.0 SANYO Electric Co., Ltd DS Company Projector Division - Sanyo PLC-XM100/L | RS232C Basic - Page 2
PLC-XM100/XM100L/XM150/XM150L Basic Serial 12 6.9 INPUT 2 Command 12 6.10 INPUT 3 Command 13 6.11 NETWORK Command 13 6.12 VOLUME + Command 14 6.13 VOLUME - Command 14 BRIGHTNESS + Command 15 6.24 BRIGHTNESS - Command 15 6.25 INPUT 2 VIDEO Command 16 6.26 INPUT 2 Y,Pb/Cb,Pr/Cr Command 16 6.27 - Sanyo PLC-XM100/L | RS232C Basic - Page 3
PLC-XM100/XM100L/XM150/XM150L Basic Serial Command Functional Specifications 6.32 POWER MANAGEMENT CANCEL Command 17 6.33 POWER MANAGEMENT SHUTDOWN Command 17 6.34 D.ZOOM + Command 17 6.35 D.ZOOM - Command 17 6.36 INPUT 3 VIDEO Command 17 6.37 INPUT 3 S-VIDEO Command 18 6.38 INPUT 3 Y,Pb/Cb,Pr - Sanyo PLC-XM100/L | RS232C Basic - Page 4
PLC-XM100/XM100L/XM150/XM150L Basic Serial Command Functional Specifications 7.7 Setting Read Command 27 7.8 Temp Read Command 28 7.9 Lamp Mode Read Command 28 4/28 - Sanyo PLC-XM100/L | RS232C Basic - Page 5
projector control commands for PLC-XM100/XM100L/XM150/XM150L ・ The projector control commands are used to control a projector can be changed in service mode. 2.2. Connection Dedicated serial cable must be used for the connection between computer and projector. PC Projector COM 1 CONTROL PORT - Sanyo PLC-XM100/L | RS232C Basic - Page 6
PLC-XM100/XM100L/XM150/XM150L Basic Serial Command Functional Specifications 3. Notes for Communication ・ The projector LENS-SHIFT UP/DOWN/RIGHT" --> 100ms 2) Other commands --> 500ms ・ For the pipelining of Status Read Command, allow more than 500 ms of interval time initialization or lamp lighting - Sanyo PLC-XM100/L | RS232C Basic - Page 7
PLC-XM100/XM100L/XM150/XM150L Basic Serial Command Functional Specifications 4. Functional INPUT 1 C25 INPUT 2 C26 INPUT 3 C27 NETWORK C28 VOLUME + C29 VOLUME - C2A SOUND MUTE ON C2B SOUND MUTE OFF C2C VIDEO MUTE ON C2D VIDEO MUTE OFF C2E SCREEN NORMAL SIZE (4：3） C2F SCREEN - Sanyo PLC-XM100/L | RS232C Basic - Page 8
PLC-XM100/XM100L/XM150/XM150L Basic Serial Command Functional Specifications ANALOG RGB INPUT 1 SCART INPUT 1 DVI (PC DIGITAL) INPUT 1 DVI (AV HDCP Lens Shift Up Lens Shift Down Lens Shift Left C60 Lens Shift Right "---" means "No Function" Command C80 C81 C82 C83 C84 C85 C86 C87 C88 C89 - Sanyo PLC-XM100/L | RS232C Basic - Page 9
PLC-XM100/XM100L/XM150/XM150L Basic Serial Command Functional Specifications 5. Status Read Command Table Command CR0 Item STATUS READ CR1 INPUT MODE READ CR2 --- CR3 CR4 LAMP TIME READ SETTING READ CR5 --- CR6 TEMP READ CR7 LAMP MODE READ CR8 --- CR9 --- CRA --- CRB --- CRC - Sanyo PLC-XM100/L | RS232C Basic - Page 10
PLC-XM100/XM100L/XM150/XM150L Basic Serial Command Functional Specifications 6. Functional Execution Command 6.1 Format ・ PC issues a command in the following format: "C" Command [CR] Command: two characters (See Functional Execution Command Table) ・ Projector commands every 100 ms after receiving - Sanyo PLC-XM100/L | RS232C Basic - Page 11
PLC-XM100/XM100L/XM150/XM150L Basic Serial Command Functional Specifications 6.4 Operation Requirements 6.4.1 In the following status of projector, Available Functional Execution Commands are limited. Projector Status Available Functional Execution Commands Standby Mode Countdown in process C00 - Sanyo PLC-XM100/L | RS232C Basic - Page 12
PLC-XM100/XM100L/XM150/XM150L Basic Serial Command Functional Specifications 6.5 POWER ON Command Standby) This command works the same way as when Power is OFF with ON/STAND-BY button of the projector and remote control. (When the command is sent once, "Power OFF?" message is displayed. If this - Sanyo PLC-XM100/L | RS232C Basic - Page 13
PLC-XM100/XM100L/XM150/XM150L Basic Serial Command Functional Specifications 6.10 INPUT 3 Command Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.11 NETWORK Command Command "C08" [CR] Detail Select Network Input. Although projector returns "OK", Input search is not executed with this command - Sanyo PLC-XM100/L | RS232C Basic - Page 14
PLC-XM100/XM100L/XM150/XM150L Basic Serial Command Functional Specifications 6.12 VOLUME + Command Mute On. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.16 VIDEO MUTE ON Command Command "C0D" [CR] Detail Video Mute ON This command works the same way as "SHUTTER" button of the - Sanyo PLC-XM100/L | RS232C Basic - Page 15
PLC-XM100/XM100L/XM150/XM150L Basic Serial Command Functional Specifications 6.18 SCREEN NORMAL SIZE Command 6.23 BRIGHTNESS + Command Command "C20" [CR] Detail Increment Brightness by 1 according to user control. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.24 BRIGHTNESS - Command - Sanyo PLC-XM100/L | RS232C Basic - Page 16
PLC-XM100/XM100L/XM150/XM150L Basic Serial Command Functional Specifications 6.25 INPUT 2 VIDEO Command Command "C23" [CR] Detail Select Video input in Input 2. Although projector returns "OK", Input search is not executed with this command while Input button is set to Mode2 or Mode3. Response - Sanyo PLC-XM100/L | RS232C Basic - Page 17
PLC-XM100/XM100L/XM150/XM150L Basic Serial Command Functional Specifications 6.31 POWER ACK] [CR] Unacceptable "?" [CR] 6.36 INPUT 3 VIDEO Command Command "C33" [CR] Detail Select Video input in Input 3. Although projector returns "OK", Input search is not executed with this command - Sanyo PLC-XM100/L | RS232C Basic - Page 18
PLC-XM100/XM100L/XM150/XM150L Basic Serial Command Functional Specifications 6.37 INPUT 3 S-VIDEO Command Command "C34" [CR] Detail Select S-Video input in Input 3. Although projector returns "OK", Input search is not executed with this command while Input button is set to Mode2 or Mode3. - Sanyo PLC-XM100/L | RS232C Basic - Page 19
PLC-XM100/XM100L/XM150/XM150L Basic Serial Command Functional Specifications 6.42 POINTER Command Command "C3F" [CR] Detail This command works the same way as "SELECT" button of the projector and remote control. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.44 FREEZE ON Command - Sanyo PLC-XM100/L | RS232C Basic - Page 20
PLC-XM100/XM100L/XM150/XM150L Basic Serial Command Functional Specifications 6.48 FOCUS + Command Command "C4B" [CR] Detail Adjust on-screen focus by making focal length longer. (The lens DVI (PC Digital) input in Input 1. Although projector returns "OK", Input search is not executed with this - Sanyo PLC-XM100/L | RS232C Basic - Page 21
PLC-XM100/XM100L/XM150/XM150L Basic Serial Command Functional Specifications 6.54 LENS SHIFT UP Command Command "C5D" [CR] Detail Move projection area upward. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.55 LENS SHIFT DOWN Command Command "C5E" [CR] Detail Move projection area - Sanyo PLC-XM100/L | RS232C Basic - Page 22
PLC-XM100/XM100L/XM150/XM150L Basic Serial Command Functional Specifications 6.60 PRESENTATION TIMER (Exit) Command Command "C8B" [CR] Detail Exit P-Timer function. This command works the same way - Sanyo PLC-XM100/L | RS232C Basic - Page 23
PLC-XM100/XM100L/XM150/XM150L Basic Serial Command Functional Specifications 7 Status Read Command 7.1 Format ・ PC issues a command in the following format. "CR" Command [CR] Command: one character (See Status Read Command Table) ・ When projector receives an appropriate command, it returns the - Sanyo PLC-XM100/L | RS232C Basic - Page 24
PLC-XM100/XM100L/XM150/XM150L Basic Serial Command Functional Specifications 7.4 Status Read Command Command "CR0" [CR] Detail Get the projector's operating status Acceptable "%1" [CR] "00" = Power ON "80" = Standby "40" = Countdown in process "20" = Cooling Down in process "10" = Power - Sanyo PLC-XM100/L | RS232C Basic - Page 25
PLC-XM100/XM100L/XM150/XM150L Basic Serial Command Functional Specifications ・ "10" [CR] Status: Power Failure When the power supply voltage inside the projector reaches abnormal status, the projector is automatically turned off. ※ Abnormal power supply voltage includes; - Filter this time, any - Sanyo PLC-XM100/L | RS232C Basic - Page 26
PLC-XM100/XM100L/XM150/XM150L Basic Serial Command Functional Specifications ・ "04" [CR] Status: Power Save This indicates it moves to Power-Save status by Power Management function as set in the Setting menu. ・ "21" [CR] Status: Cooling Down in process after OFF due to Lamp Failure When the - Sanyo PLC-XM100/L | RS232C Basic - Page 27
PLC-XM100/XM100L/XM150/XM150L Basic Serial Command Functional Specifications 7.5 Input Mode Read Command .(only for Networking-capable models) Unacceptable "?" [CR] 7.6 Lamp Time Read Command Command "CR3" [CR] Detail Get total lamp running hours. *return lamp operating time multiplied by - Sanyo PLC-XM100/L | RS232C Basic - Page 28
PLC-XM100/XM100L/XM150/XM150L Basic Serial Command Functional Specifications 7.8 Temp Read Command Command "CR6" [CR] Detail Get the information of temperature inside a projector problems, it %3 starts with "E" like"E00.0" [CR]. With several built-in temperature sensors, the projector
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
 |
 |
BASIC SERIAL COMMAND
FUNCTIONAL SPECIFICATIONS
PLC-XM100
PLC-XM150
PLC-XM100L
PLC-XM150L
Ver.1.0
SANYO Electric Co., Ltd
DS Company
Projector Division