Sanyo PLC-XM100/L RS232C Expand

Sanyo PLC-XM100/L - 5000 Lumens Manual

Get Sanyo PLC-XM100/L - 5000 Lumens PDF manuals and user guides View all Sanyo PLC-XM100/L manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo PLC-XM100/L manual content summary:

  • Sanyo PLC-XM100/L | RS232C Expand - Page 1
    EXPAND SERIAL COMMAND FUNCTIONAL SPECIFICATIONS PLC-XM100 PLC-XM150 PLC-XM100L PLC-XM150L Ver.1.0 SANYO Electric Co., Ltd DS Company Projector Division
  • Sanyo PLC-XM100/L | RS232C Expand - Page 2
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications Contents 1． Overview ...9 2． Serial Interface Specification 9 Status Read Command Table 14 6.5 Screen Status Read Command Table 15 6.6 Lamp Status Read Command Table 15 6.7 Sound Status Read Command Table 15 6.8
  • Sanyo PLC-XM100/L | RS232C Expand - Page 3
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 8.4.9 CF_OFFSET- Command 20 8.4.10 CF_NZRED Command 20 8.4.11 CF_PROGV Command 21 8.4.12 CF_IMAGE Command 21 8.4.13 CF_IMAGEADJ Command 22 8.5 PC
  • Sanyo PLC-XM100/L | RS232C Expand - Page 4
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 8.7.15 CF_HPOS Command 36 8.8 Lamp Command...37 8.8.1 CF_LAMPMODE Command 37 8.8.2 CF_LAMPLIFECONTRL_ Command 37 8.9 Sound Command ...38 8.9.1 CF_VOLUME Command 38 8.9.2 CF_MUTE Command 38 8.9.3 CF_BLTINSP Command 38
  • Sanyo PLC-XM100/L | RS232C Expand - Page 5
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 8.11.1 CF_KEYEMU Command 48 8.11.2 CF_MENU Command 48 8.11.3 CF_POWER Command 49 8.11.4 CF_FREEZE Command 49 8.11.5 CF_VMUTE Command 49 9．
  • Sanyo PLC-XM100/L | RS232C Expand - Page 6
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 9.7 Input Read Command 59 9.7.1 CR_INPUT Command 59 CR_CORNERTESTPAT Command 66 9.8.8 CR_CEIL Command 66 9.8.9 CR_REAR Command 66 9.9 Lamp Status Read Command 67 9.9.1 CR_LAMPREPL Command 67 9.9.2 CR_LAMPH Command
  • Sanyo PLC-XM100/L | RS232C Expand - Page 7
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 9.10.2 CR_MUTE Command 69 9.10.3 CR_BLTINSP Command 69 9.11 Setting Status Read Command 70 9.11.1 CR_LANG Command 70 9.11.2 CR_INPUTBUTTON
  • Sanyo PLC-XM100/L | RS232C Expand - Page 8
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 9.12.4 CR_FREEZE Command 77 9.12.5 CR_TEMPFAIL Command 78 9.12.6 CR_TEMP Command 79 9.12.7 CR_SHUTCOND Command 79 9.12.8 CR_SERIALNO Command 79 8/79
  • Sanyo PLC-XM100/L | RS232C Expand - Page 9
    with PJ-Net organizer for PLC-XM100 / XM100L / XM150 / XM150L. ・ Supporting Firmware Ver. 1.x of the projector. ・ Commands in this be changed in Service mode. 2.2 Connection Dedicated serial cables must be used for the connection between a computer and a projector. PC Projector COM 1 CONTROL
  • Sanyo PLC-XM100/L | RS232C Expand - Page 10
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 3． Notes for command pipelining, allow the interval time of no less than100ms after receiving return value. (No less than 100 ms) Command PC → Projector "CF_BRIGHT_032" CR Next command Projector → PC "000" CR
  • Sanyo PLC-XM100/L | RS232C Expand - Page 11
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 5． Functional Execution Command Table 5.1 /OFF of Noise reduction Set mode of Progressive scan Set Image mode Set Store/Reset of values in Image Adjustment 5.2 PC Adjust Control Command Table Execute command CF_FSYNC_%1
  • Sanyo PLC-XM100/L | RS232C Expand - Page 12
    PLC-XM100/XM100L/XM150/XM150L 5.5 Lamp Command Table Execute command CF_LAMPMODE_%1 [CR] CF_LAMPLIFECONTRL_%1 [CR] Item Select Lamp mode Select Lamp life Reset Filter used time Set time to display Filter cleaning / replacement warning on screen Execute operation of scroll of filter Reset Filter
  • Sanyo PLC-XM100/L | RS232C Expand - Page 13
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications CF_PJPINCODE_%1[CR] CF_SHUTRCPROT_ on Shutter control function Set time of operating shutter management function Set Video delay control function Set Test pattern display function Reset to Factory Default settings 5.8
  • Sanyo PLC-XM100/L | RS232C Expand - Page 14
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 6． Status Read Command Table 6.1 Image Status Read Command Table Status Read command CR_BRIGHT [CR] CR_CONT [CR] CR_COLOR [CR] CR_TINT [CR]
  • Sanyo PLC-XM100/L | RS232C Expand - Page 15
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Lamp replacement time Get information of actual Lamp running time Get lamp running time multiplied by a coefficient Get selected Lamp mode Get status of the Lamp Get total running time of projector Get the total number of lamps Get selected mode in Lamp
  • Sanyo PLC-XM100/L | RS232C Expand - Page 16
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command setting mode of P-timer Get status of P-timer Get setting time for count down mode in P-timer Get RC/KEY prohibited CR_SHUTCOND [CR] CR_SERIALNO [CR] Item Get operating status of Projector Get status of signal existence Get setting status of No
  • Sanyo PLC-XM100/L | RS232C Expand - Page 17
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 8． Functional Projector Status Standby Mode Countdown in process Cooling Down in process Cooling Down due to Abnormal Temperature Abnormal Temperature Power Failure (60 seconds after Power failure occurred) Abnormal Filter
  • Sanyo PLC-XM100/L | RS232C Expand - Page 18
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 8.4 Image Command 8.4.1 CF_ by 1 Details Set user controlled value of Color (Available only in the normal Power ON status) The value set by this command will not be stored in the projector's memory. Therefore, when
  • Sanyo PLC-XM100/L | RS232C Expand - Page 19
    /XM150/XM150L Expand Serial Command Functional Specifications 8.4.5 CF_SHARP Command Command "CF_SHARP_%1" [CR] "000-031 Directly specify setting value of Sharpness %1 "UP Increment setting value of Sharpness by 1 "DN Decrement setting value of Sharpness by 1 Details Response Set user
  • Sanyo PLC-XM100/L | RS232C Expand - Page 20
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 8.4.8 CF_COLTEMP Command Command "CF_COLTEMP_%1" [CR] "000 Xlow %1 "001 Low "002 Mid "003 High Details Set Color Temperature The value set by this command will not be stored in the projector's memory. Therefore
  • Sanyo PLC-XM100/L | RS232C Expand - Page 21
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional user） "CUSTOM10 Image10 （the value adjusted and stored by user） Select Image Mode (Available only in the normal Power ON status) Parameter "CUSTOM1" to "CUSTOM10" corresponds to "Image1" to "Image10" displayed in projector
  • Sanyo PLC-XM100/L | RS232C Expand - Page 22
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 8.4.13 CF_IMAGEADJ Command Command "CF_IMAGEADJ_%1"[CR] "RST"------ Reset adjusted value for the Image "STR1"---- Store current adjusted value to Image 1 "STR2"---- Store current adjusted value to Image 2 "STR3"----
  • Sanyo PLC-XM100/L | RS232C Expand - Page 23
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 8.5 PC Adjust Control Command 8.5.1 the normal Power ON status) The value set by this command will not be stored in the projector's memory. Therefore, when the power is turned to ALL OFF status, the value returns to the
  • Sanyo PLC-XM100/L | RS232C Expand - Page 24
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 8.5.4 CF_H-POS Command Command "CF_H-POS_%1" normal Power ON status) The value set by this command will not be stored in the projector's memory. Therefore, when the power is turned to ALL OFF status, the value returns to
  • Sanyo PLC-XM100/L | RS232C Expand - Page 25
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 8.5.7 CF_DLINE Command Command "CF_DLINE_ normal Power ON status) The value set by this command will not be stored in the projector's memory. Therefore, when the power is turned to ALL OFF status, the value returns to
  • Sanyo PLC-XM100/L | RS232C Expand - Page 26
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 8.5.9 CF_ORGMODE Command Command "CF_ORGMODE_%1" [CR] signal originated with by issuing this command. This command is used to specify projector internal settings such as whether or not to get PC signal through IP (Available
  • Sanyo PLC-XM100/L | RS232C Expand - Page 27
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 8.5.11 CF_PCMODEFREE Command Command "CF_PCMODEFREE_%1" [CR] "1 Set Mode1 to Free status "2 Set Mode2 to Free status "3 Set Mode3 to Free
  • Sanyo PLC-XM100/L | RS232C Expand - Page 28
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 8.6 Input Control Command 8.6.1 CF_INPUT Command Command " of Projector or Remote Control. *When selecting Input4 on a projector with PJ-Net unattached, it comes to "103". *When selecting Input4on a projector with
  • Sanyo PLC-XM100/L | RS232C Expand - Page 29
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 8.6.3 CF_INPUT 1 Command Command "CF_INPUT1_%1" [CR] "DIGITAL Select PC Digital Input %1 "ANALOG Select PC Analog Input "SCART Select SCART Input "HDCP
  • Sanyo PLC-XM100/L | RS232C Expand - Page 30
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 8.6.7 CF_SYSTEM Command Command "CF_SYSTEM_%1" [CR] Input is PC Analog "VGA1 Select VGA1 "VGA2 Select VGA2 : : "XGA1 Select XGA1 : : "WXGA3 Select
  • Sanyo PLC-XM100/L | RS232C Expand - Page 31
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 8.7 Screen Control Command 8.7.1 CF_SCREEN Select screen size with backward switching in possible range Common in AV/PC "RST Reset Screen adjustment Details Select screen size (Available only in the normal Power ON
  • Sanyo PLC-XM100/L | RS232C Expand - Page 32
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 8.7.3 CF_KEYSTONE Command Command "CF_KEYSTONE _%1" [CR] "UP Correct Keystone distortion to reduce upper part of image "FUP Correct Keystone distortion to reduce upper part to Reset Details Set received Projector
  • Sanyo PLC-XM100/L | RS232C Expand - Page 33
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 8.7.6 CF_CORNER-UR Command Command " in normal Power ON status only) The correction starts with the first command received Projector returns error code ""101 and no operation is made when exceeding the correction limit,
  • Sanyo PLC-XM100/L | RS232C Expand - Page 34
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 8.7.9 CF_CORNERTESTPAT Command Command "CF_CORNERTESTPAT_%1"[CR] "RED Select Red %1 "WHITE" -------- Select White "BLUE Select Blue "OFF Select Off Details Display test
  • Sanyo PLC-XM100/L | RS232C Expand - Page 35
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 8.7.12 CF_VSCALE Command Command "CF_VSCALE_%1" [CR] "035 is not in "Custom", projector changes image mode into Custom by receiving this command. *When there is no signal detected, projector returns 101 and the command
  • Sanyo PLC-XM100/L | RS232C Expand - Page 36
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 8.7.14 CF_HSCALE Command Command "CF_HSCALE_%1" [CR] "035 is not in "Custom", projector changes image mode into Custom by receiving this command. *When there is no signal detected, projector returns 101 and the command
  • Sanyo PLC-XM100/L | RS232C Expand - Page 37
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 8.8 Lamp Command 8.8.1 CF_LAMPMODE Command Command "CF_LAMPMODE_%1" [CR] "NORMAL Set Lamp status to Normal mode %1 "ECO1 Set Lamp status to Eco1 mode "ECO2 Set Lamp status to Eco2 mode "AUTO Set Lamp status to
  • Sanyo PLC-XM100/L | RS232C Expand - Page 38
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 8.9 Sound Command 8.9.1 CF_VOLUME Command status is canceled just like RC operation. The value set by this command is stored in Projector's memory. * When input signal is Network, error code "101" is returned. Response
  • Sanyo PLC-XM100/L | RS232C Expand - Page 39
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 8.10 Setting Command 8.10.1 CF_LANG Command Command "CF_LANG_%1" [CR] "ENG Select ENGLISH "DEU Select German "FRA Select French "ITA Select
  • Sanyo PLC-XM100/L | RS232C Expand - Page 40
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 8.10.4 CF_DISP Command in EEPROM and the setting remains even after the power is turned to ALL OFF status. *When ％1="USER" is received, error code "101" is returned, in the case of Capture non-practice. Response
  • Sanyo PLC-XM100/L | RS232C Expand - Page 41
    ％2="USER" is received, error code "101" is returned, in the case of Capture non-practice. Response Acceptable "000" [CR] Unacceptable "Error Code" [CR] 8.10.7 CF_FILH Command Command "CF_FILH_%1" [CR] %1 "RST Reset Filter used time Details Reset used time for filter of projector Response
  • Sanyo PLC-XM100/L | RS232C Expand - Page 42
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 8.10.10 CF_FILSCRL Command Command "CF_FILSCRL_%1" [CR] %1 "RST Reset Filter scroll counter Details Reset Filter scroll counter Response Acceptable "000" [CR] Unacceptable "Error Code" [CR] 8.10.11 CF_FANSPEED
  • Sanyo PLC-XM100/L | RS232C Expand - Page 43
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 8.10.14 CF_RSENS Command Command "CF_RSENS_%1" [CR] "ALL Select top, front and back receiver of projector "FRONTTOP Select front and top receivers of projector Details Set time of Power Management time (Available
  • Sanyo PLC-XM100/L | RS232C Expand - Page 44
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 8.10.17 CF_STANDBYMODE Command Command "CF_STANDBYMODE_%1" [CR] %1 "ECO Less standby electricity "NORMAL Normal standby electricity Details Switch Standby Mode setting. (
  • Sanyo PLC-XM100/L | RS232C Expand - Page 45
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 8.10.21 CF_PTIMER Command Command "CF_PTIMER_%1" [CR] "START Start P-timer "STOP Stop P-timer %1 "RESTART Resume P-timer "RST Reset "180 Directly specify setting time Details Set the time for Count down mode
  • Sanyo PLC-XM100/L | RS232C Expand - Page 46
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 8.10.24 CF_PJPINCODE Command Command completed. When PIN code lock is set to "On1", it needs to send this command every time the projector is turned on. Acceptable "000" [CR] Unacceptable "Error Code" [CR] 8.10.25
  • Sanyo PLC-XM100/L | RS232C Expand - Page 47
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 8.10.27 CF_SHUTH Command Command "CF_SHUTH_%1" [CR] "005"-"180"----------Specify setting time directly %1 "UP Add 1 minute "DN Decrease 1 minute Details Set time "RST" Details Reset to Factory Default setting
  • Sanyo PLC-XM100/L | RS232C Expand - Page 48
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 8.11 Other Commands 8.11.1 Projector. Once Auto PC adj. is started with "AUTOPC" command, it does not stop with receiving the command another time. *When transmit command of CF_KEYEMU parameter - When User menu
  • Sanyo PLC-XM100/L | RS232C Expand - Page 49
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 8.11.3 CF_POWER Command Command "CF_POWER_ status after returning "000" [CR] to the command CF_POWER ON. Therefore, to get the projector status requires using Status Read command. Set Power to ON/OFF Acceptable "000" [CR]
  • Sanyo PLC-XM100/L | RS232C Expand - Page 50
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 9． Status Read Command 9.1 Format 1) PC issues commands in format as below: "CR_ COMMAND" [CR] Command: String 2) When projector "CR_BRIGHT" [CR] Details Get user controlled value of Brightness Acceptable Response
  • Sanyo PLC-XM100/L | RS232C Expand - Page 51
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 9.4.4 CR_TINT Command Command "CR_TINT" [CR] Details Get user controlled value of Tint Acceptable "000_%1" [CR] Response %1 Unacceptable "000 - 063" "Error Code" [CR] --- When command is not available in the given
  • Sanyo PLC-XM100/L | RS232C Expand - Page 52
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 9.4.9 CR_WBAL-B Command Command "CR_WBAL-B" [CR] Details Get user controlled Blue value of White Balance Acceptable "000_%1" [CR] Response %1 "000 - 063" Unacceptable "Error Code" [CR] 9.4.10 CR_COLTEMP Command
  • Sanyo PLC-XM100/L | RS232C Expand - Page 53
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 9.4.14 CR_NZRED Command Command "CR_NZRED" [CR] Details Get Noise Reduction setting status Acceptable "000_%1" [CR] Response %1 "OFF Cancel Noise Reduction "
  • Sanyo PLC-XM100/L | RS232C Expand - Page 54
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 9.5 PC Adjust Status Read Command 9.5.1 CR_FSYNC Command Command "CR_FSYNC" [CR] Details Get value of Fine Sync Acceptable "000_%1" [CR] Response %1
  • Sanyo PLC-XM100/L | RS232C Expand - Page 55
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 9.5.5 CR_V-POS Command Command "CR_V-POS" [CR] Details Get value of Vertical Position Acceptable "000_%1" [CR] Response %1 Unacceptable "0000 - nnnn" (
  • Sanyo PLC-XM100/L | RS232C Expand - Page 56
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 9.5.8 CR_ORGMODE Command Command "CR_ORGMODE" [CR] Details Get the original signal of current selected Mode that is set in PC Adj.
  • Sanyo PLC-XM100/L | RS232C Expand - Page 57
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 9.5.9 CR_PCSTORE Command Command "CR_PCSTORE" [CR] Details Get Free or Stored status of MODE1 - 5 in PC Adjust. Data consists of 10
  • Sanyo PLC-XM100/L | RS232C Expand - Page 58
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 9.6 Video Status Read Command 9.6.1 CR_SERSYS Command Command "CR_SERSYS" [CR] Details Get selected current signal. Auto detected signal is returned in
  • Sanyo PLC-XM100/L | RS232C Expand - Page 59
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 9.7 Input Read Command 9.7.1 CR_INPUT Command Command "CR_INPUT" [CR] Details Get selected INPUT No. Acceptable Response %1 "000_%1" [CR] "1 - 4" Unacceptable "Error Code" [
  • Sanyo PLC-XM100/L | RS232C Expand - Page 60
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 9.7.5 CR_SRCINP3 Command Command "CR_SRCINP3" [CR] Details Get Source of INPUT3 Acceptable "000_%1" [CR] "VIDEO in Video mode Response %1 "S-VIDEO in S-
  • Sanyo PLC-XM100/L | RS232C Expand - Page 61
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 9.7.7 CR_SYSTEM Command Command "CR_SYSTEM" [CR] Details Get selected System Acceptable "000_%1" [CR] Input is PC Analog "VGA1 indicates VGA1 is
  • Sanyo PLC-XM100/L | RS232C Expand - Page 62
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 9.7.8 CR_SYSLIST Command Command "CR_SYSLIST" [CR] Details Get possible systems for System list Acceptable "000_%1_%2_---_%x" [CR] Error Code "101"
  • Sanyo PLC-XM100/L | RS232C Expand - Page 63
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 9.7.10 CR_HMSLOT Command Command "CR_HMSLOT" [CR] Details Get and the power OFF, error code "101" is returned. *In models not supporting PJ-Net, error code "103" is returned. Unacceptable "Error Code" [CR] 63/79
  • Sanyo PLC-XM100/L | RS232C Expand - Page 64
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 9.7.15 CR_IDSLOT1 Command Command "CR_IDSLOT1" [CR] Net attached and the power OFF, error code "101" is returned. *In models not supporting PJ-Net, error code "103" is returned. Unacceptable "Error Code" [CR] 64/79
  • Sanyo PLC-XM100/L | RS232C Expand - Page 65
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 9.8 Screen Status Read Command 9.8.1 CR_SCREEN Command Command "CR_SCREEN" [CR] Details Get selected screen image size Acceptable "000_%1" [CR] Response "NORMAL
  • Sanyo PLC-XM100/L | RS232C Expand - Page 66
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 9.8.6 CR_ KYSTNMODE Command Command "CR_KYSTNMODE" [CR] Details Get setting status of Keystone Store Mode Acceptable "000_%1" [CR] Response %1 "STR Store mode is "Store" "RST Store mode is "Reset" Unacceptable
  • Sanyo PLC-XM100/L | RS232C Expand - Page 67
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 9.9 Lamp Status Read Command 9.9.1 CR_LAMPREPL Command Command "CR_LAMPREPL" [CR] Details Get information of Lamp Replacement time Acceptable "000_%1" [CR] Response %1 "1Y indicates over lamp replacement time "1N
  • Sanyo PLC-XM100/L | RS232C Expand - Page 68
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 9.9.6 CR_PROJH Command Command "CR_PROJH" [CR] Details Get total running time of Projector of Lamp life control Acceptable "000_%1" [CR] Response %1 "MODE1 Lamp life control is Mode1 status "MODE2 Lamp life
  • Sanyo PLC-XM100/L | RS232C Expand - Page 69
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 9.10 Sound Status Read Command 9.10.1 CR_VOLUME Command Command "CR_VOLUME" [CR] Details Get volume value by user control * When input signal is Network, error code "101" is returned. Response Acceptable %1 "000_
  • Sanyo PLC-XM100/L | RS232C Expand - Page 70
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 9.11 Setting Status Read Command 9.11.1 no signal Acceptable "000_%1" [CR] Response "BLUE Blue Back is selected %1 "USER User is selected "BLACK Black Back is selected Unacceptable "Error Code" [CR] 70/79
  • Sanyo PLC-XM100/L | RS232C Expand - Page 71
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 9.11.5 CR_LOGO Command Command "CR_LOGO" [CR] Details Get setting status of Logo Acceptable "000_%1" [CR] Response "DFLT Default Logo is enabled %1 "USER User ] Details Get Filter used time Acceptable "000_%1"
  • Sanyo PLC-XM100/L | RS232C Expand - Page 72
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 9.11.10 CR_FILCOND Command Command "CR_FILCOND" [CR] Details Get status of filter clog Acceptable "000_%1" [CR] Response "CLOG" = Filter is clogged %1 "WARN" = Filter is nearly clogged "CLEAN" = Filter is not
  • Sanyo PLC-XM100/L | RS232C Expand - Page 73
    XM150/XM150L Expand Serial Command Functional Specifications 9.11.15 CR_RSENS Command Command "CR_RSENS" [CR] Details Get selected location of infrared remote receiver of remote control Acceptable "000_%1" [CR] Response "ALL" -------- Select top, front and back receiver of projector time for
  • Sanyo PLC-XM100/L | RS232C Expand - Page 74
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 9.11.20 CR_ON-STA Command Command "Error Code" [CR] 9.11.24 CR_PTIME Command Command "CR_PTIME" [CR] Details Get setting time for count down mode of P-timer Response Acceptable %1 "000_%a" [CR] "001" - "180
  • Sanyo PLC-XM100/L | RS232C Expand - Page 75
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 9.11.25 CR_KEYDIS Command Command "CR_KEYDIS" [CR] Details Get status of RC/KEY (valid or invalid) Acceptable "000_%1" [CR] Response "
  • Sanyo PLC-XM100/L | RS232C Expand - Page 76
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 9.11.30 CR_SHUTKEYPROT Unacceptable "Error Code" [CR] 9.11.31 CR_SHUTH Command Command "CR_SHUTH" [CR] Details Get time setting to start the shutter management Acceptable "000_%1" [CR] Response "005 5 minutes "006
  • Sanyo PLC-XM100/L | RS232C Expand - Page 77
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 9.12 Other Status Read Commands 9.12.1 CR_STATUS Command COMMAND "CR_STATUS" [CR] Detail Get operating status of Projector turned Off due to lamp failure "81"＝ Standby after Cooling Down due to lamp failure "2C" =
  • Sanyo PLC-XM100/L | RS232C Expand - Page 78
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 9.12.5 CR_TEMPFAIL Command Command "CR_TEMPFAIL" [CR] Details Get the temperature inside a projector as "_00.0S". When the projector is reset, "_00.0S" is set, and every time abnormal temperature occurs, it renews the
  • Sanyo PLC-XM100/L | RS232C Expand - Page 79
    PLC-XM100/XM100L/XM150/XM150L Expand Serial Command Functional Specifications 9.12.6 CR_TEMP Command Command "CR_TEMP" [CR] Details Get the current temperature information inside a projector some projectors that the temperature continues to go up to abnormal status as long as lamp ballasts are
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
EXPAND SERIAL COMMAND
FUNCTIONAL SPECIFICATIONS
PLC-XM100
PLC-XM150
PLC-XM100L
PLC-XM150L
Ver.1.0
SANYO Electric Co., Ltd
DS Company
Projector Division