Sanyo PLC-XR301 Owners Manual

Sanyo PLC-XR301 - XGA Projector With 3000 Lumens Manual

Get Sanyo PLC-XR301 - XGA Projector With 3000 Lumens PDF manuals and user guides
UPC - 086483077043
View all Sanyo PLC-XR301 manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo PLC-XR301 manual content summary:

  • Sanyo PLC-XR301 | Owners Manual - Page 1
    Multimedia Projector MODEL PLC-XR301 Network Supported Refer to the Owner's Manuals below for details about network function. □ Network Set-up and Operation □ PJ Network Manager Owner's Manual
  • Sanyo PLC-XR301 | Owners Manual - Page 2
    colors, and matrix liquid crystal display (LCD) technology. ♦ Compact Design ♦ Security Function This projector is designed compact in size and weight. and proper maintenance of the projector. ♦ Useful Functions for Presentations ♦ LAN Network Function - The digital zoom function allows you
  • Sanyo PLC-XR301 | Owners Manual - Page 3
    Safety Instructions 5 Air Circulation 6 Installing the Projector in Proper Position 6 Moving the Projector 28 Auto PC Adjustment 29 Manual PC Adjustment 30 Image Mode Projector Cabinet 60 Lamp Replacement 61 Appendix 63 Troubleshooting 63 Menu Tree 67 Indicators and Projector
  • Sanyo PLC-XR301 | Owners Manual - Page 4
    Troubleshooting" section on pages 63-65 of this manual. If the problem still persists, contact the dealer where you purchased the projector or the service The afterimage may remain on the LCD panels by the characteristic of panel. 50cm 1m 1m CAUTION Do not set the projector in greasy, wet, or
  • Sanyo PLC-XR301 | Owners Manual - Page 5
    service personnel under the following conditions: a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the projector. c. If the projector has been exposed to rain or water. d. If the projector does not operate normally by following the operating instructions
  • Sanyo PLC-XR301 | Owners Manual - Page 6
    Safety Instructions Air Circulation Openings in the cabinet are provided for projector by courier or any other transport service in an unsuitable transport case. This may cause damage to the projector. For information about transporting the projector by courier or any other transport service,
  • Sanyo PLC-XR301 | Owners Manual - Page 7
    found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Model Number : PLC-XR301 Trade Name : Sanyo Responsible party : SANYO
  • Sanyo PLC-XR301 | Owners Manual - Page 8
    Lens Cap (See page 60 for attaching.) CAUTION Do not turn on a projector with lens cap attached. High temperature from light beam may damage lens cap LAN Connection Terminal is for the Network function. Refer to the owner's manual of "Network Set-up and Operation" .  Kensington Security Slot This
  • Sanyo PLC-XR301 | Owners Manual - Page 9
    and Functions ③ ④ ⑤ ⑥ ⑦ ① CONTROL PORT When the projector is controlled by a computer, connect to this jack with serial control (p.15). ⑥ LAN Connection Terminal Connect the LAN cable (refer to the owner's manual of "Network Set-up and Operation"). ⑦ AUDIO IN Connect the audio output signal
  • Sanyo PLC-XR301 | Owners Manual - Page 10
    adjust the value in the On-Screen Menu (p.21). -Pan the image in the Digital zoom +/- mode (p.35). -Adjust the volume level (Point ◄►buttons) (p.24). 44). ④ ON/STAND-BY button Turn the projector on or off (pp.18-20). ⑤ POWER indicator -Lights red when the projector is in stand-by mode. -Lights green
  • Sanyo PLC-XR301 | Owners Manual - Page 11
    Part Names and Functions ① ON/STAND-BY button Turn the projector on or off. (pp.18-20) ② AUTO SET buttons - Select an item or adjust the value in the On-Screen Menu. (p.21) ⑳ - Pan the image in the Digital zoom +/- mode. (p.35) ⑲ ⑦ SCREEN button Select a screen mode. (pp.26, 34-35, 42) ⑧ M
  • Sanyo PLC-XR301 | Owners Manual - Page 12
    is replaced by an incorrect type. ● Dispose of used batteries according to the instructions or your local disposal rule or guidelines. Remote Control Operating Range Point the remote control toward the projector (Infrared Remote Receiver) when pressing the buttons. Maximum operating range for the
  • Sanyo PLC-XR301 | Owners Manual - Page 13
    lock the adjustable foot and rotate the adjustable foot to adjust the position and tilt. To retract the adjustable foot, lift the front of the projector and push and undo the foot lock latch. Keystone distortion of the projected image can be corrected by menu operation.(see pages 23, 44-45
  • Sanyo PLC-XR301 | Owners Manual - Page 14
    using the COMPUTER IN 1/ S-VIDEO IN / COMPONENT IN and the COMPUTER IN 2/MONITOR OUT terminals as input. • When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available. • When the cable is of the longer variety, it is advisable to use the COMPUTER IN 1 /S-VIDEO IN /COMPONENT
  • Sanyo PLC-XR301 | Owners Manual - Page 15
    used for connection • Video Cable • S-Video Cable • S-Video-VGA Cable • Audio Cables (Mini Plug: stereo) (Cables are not supplied with the projector. ) External Audio Equipment S-Video Output Audio Output Audio Input S-Video cable Composite Video and Audio Output S-Video-VGA cable Audio cable
  • Sanyo PLC-XR301 | Owners Manual - Page 16
    for connection • Audio Cables (Mini Plug: stereo) • Scart-VGA Cable • Component Cable • Component-VGA Cable (Cables are not supplied with this projector.) Audio Output RGB Scart 21-pin Output Component Video Output (Y, Pb/Cb, Pr/Cr) Audio cable (stereo) Component cable External Audio Equipment
  • Sanyo PLC-XR301 | Owners Manual - Page 17
    the type of power being supplied, consult your authorized dealer or service station. Connect the projector with all peripheral equipment before turning the projector on. Installation Connect the AC power cord (supplied) to the projector. CAUTION The AC outlet must be near this equipment and must
  • Sanyo PLC-XR301 | Owners Manual - Page 18
    . And then follow the input signal guidance window to correct the signal and connection. If the projector is locked with a PIN code, PIN code input dialog box will appear. Enter the PIN code as instructed on the next page. 16 The preparation display will disappear after 30 seconds. Selected Input
  • Sanyo PLC-XR301 | Owners Manual - Page 19
    digit number. After entering the four-digit number, move the pointer to Set. Press the SELECT button so that you can start to operate the projector projector. What is projector. Setting a PIN code prevents unauthorized use of the projector. A PIN code consists of a four-digit projector can no
  • Sanyo PLC-XR301 | Owners Manual - Page 20
    top control or on the remote control, and Power off? appears on the screen. 2 Press the ON/STAND-BY button again to turn off the projector. The POWER indicator starts to blink red, and the cooling fans keep running. (You can select the level of fans' quietness and speed. See "Fan
  • Sanyo PLC-XR301 | Owners Manual - Page 21
    Menu The projector can be adjusted or set via the On-Screen Menu. The menus have a hierarchical structure, with a main menu that is divided into submenus, which are further divided into other submenus. For each adjustment and setting procedure, refer to respective sections in this manual. 1 Press
  • Sanyo PLC-XR301 | Owners Manual - Page 22
    of the image [ Normal, True, Wide, Full, Custom and Digital zoom +/- ] (pp.3435). For Video source, used to set sound (p.24). ⑦ Setting Used to set the projector's operating configurations (pp.43-56). ⑧ Information manual of "Network Set-up and Operation". ⑩ Guide The key operation is displayed. 22
  • Sanyo PLC-XR301 | Owners Manual - Page 23
    keystone distortion after pressing the AUTO SETUP button on the top control or the AUTO SET button on the remote control, correct the image manually as follows: Press the KEYSTONE button on the remote control. The Keystone dialog box appears. Use the Point ▲▼ buttons to correct keystone distortion
  • Sanyo PLC-XR301 | Owners Manual - Page 24
    Basic Operation Sound Adjustment Direct Operation Volume Press the VOLUME+/- buttons on the top control or on the remote control to adjust the volume. The volume dialog box appears on the screen for a few seconds. Mute Press the MUTE button on the remote control to select On to temporarily turn off
  • Sanyo PLC-XR301 | Owners Manual - Page 25
    control (p.57). FREEZE button D.ZOOM buttons INFO. button LAMP button D.ZOOM buttons Press the D.ZOOM buttons on the remote control to enter to the Digital zoom +/- mode. See page 35 for details. LAMP button Press the LAMP button on the remote control to select the lamp mode for changing the
  • Sanyo PLC-XR301 | Owners Manual - Page 26
    Basic Operation NO SHOW button Press the NO SHOW button on the remote control to black out the image. To restore to normal, press the NO SHOW button again or press any other button. The screen changes each time you press the NO SHOW button as follows. black out → normal → black out → normal No
  • Sanyo PLC-XR301 | Owners Manual - Page 27
    Computer Input Input Source Selection (RGB: Computer 1/Computer 2) Direct Operation Choose either Computer 1(RGB) or Computer 2(RGB) by pressing the COMPUTER 1 or Computer 2 button on the remote control. Before using these buttons, correct input source should be selected through Menu operation as
  • Sanyo PLC-XR301 | Owners Manual - Page 28
    is required (pp.30-31). There is no signal input from the computer. Check the connection between your computer and the projector. (See "Troubleshooting" on p.63.) The preset system is manually adjusted in the PC adjust Menu. The adjusted data can be stored in Mode 1-5 (pp.30-31). PC Systems provided
  • Sanyo PLC-XR301 | Owners Manual - Page 29
    adjusted parameters from the Auto PC Adjustment can be stored in the projector. Once the parameters are stored, the setting can be done just by Adjustment function. When the image is not provided properly with this operation, manual adjustments are required (pp.30-31). • The Auto PC Adjustment
  • Sanyo PLC-XR301 | Owners Manual - Page 30
    PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has five independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific computer. 1 Press the MENU button to display the On-Screen
  • Sanyo PLC-XR301 | Owners Manual - Page 31
    be selected when 480i, 575i, 480p, 575p, 720p, 1035i or 1080i is selected in the PC System Menu (p.28). • When input computer signal to the projector, PC adjust will become available. 31
  • Sanyo PLC-XR301 | Owners Manual - Page 32
    Green) Colorboard Image 1 Image 2 Image 3 Image 4 Dynamic For viewing pictures in a bright room. Standard Normal picture mode preset on the projector. Real Picture mode with improved halftone for graphics. Blackboard (Green) For the image projected on a blackboard. This mode helps enhance the image
  • Sanyo PLC-XR301 | Owners Manual - Page 33
    Image Adjustment 1 Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Image adjust and then press the Point ►or the SELECT button. 2 Use the Point ▲▼ buttons select the desired item and then press the SELECT button to display the adjustment dialog box. Use the
  • Sanyo PLC-XR301 | Owners Manual - Page 34
    resolution is higher than it, reset the resolution to the lower before connecting to the projector. • The image data in other than 1024 x 768 is modified to fit the screen size in initial mode. • True, Full, and Digital zoom +/- are disabled and cannot be displayed when 480i, 575i, 480p or 575p is
  • Sanyo PLC-XR301 | Owners Manual - Page 35
    Input Custom Adjust the screen scale and position manually with this function. Press the Point ►button at . To reset, press the SELECT button at Yes. For zooming in and out the images Digital zoom + Select Digital zoom +. The On-Screen Menu disappears and D. zoom + appears. Press the SELECT button
  • Sanyo PLC-XR301 | Owners Manual - Page 36
    Video Input Input Source Selection (Video, S-video) Direct Operation Choose Video or S-video by pressing the VIDEO or the S-VIDEO button on the remote control. Before using these buttons, correct input source should be selected through menu operation as described below. Remote Control VIDEO button
  • Sanyo PLC-XR301 | Owners Manual - Page 37
    Video Input Input Source Selection (Component, RGB Scart 21-pin) Direct Operation Choose Computer 1(Component) or Computer 1(Scart) by pressing the COMPONENT or the COMPUTER 1 button on the remote control. Before using these buttons, correct input source should be selected through Menu operation
  • Sanyo PLC-XR301 | Owners Manual - Page 38
    system, and adjusts itself to optimize its performance. When Video System is PAL-M or PAL-N, select the system manually. PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC 4.43, PAL
  • Sanyo PLC-XR301 | Owners Manual - Page 39
    and then press the SELECT button . IMAGE button Dynamic For viewing pictures in a bright room. Standard Normal picture mode preset on the projector. Cinema Picture mode adjusted with fine tone. Blackboard (Green) For the image projected on a blackboard. This mode help enhance the image projected
  • Sanyo PLC-XR301 | Owners Manual - Page 40
    Video Input Image Adjustment 1 Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Image adjust and then press the Point ► or the SELECT button. 2 Use the Point ▲▼ buttons select the desired item and then press the SELECT button to display the adjustment dialog
  • Sanyo PLC-XR301 | Owners Manual - Page 41
    options. Off.......... Disabled. L1........... For an active picture. L2........... For a still picture. Film........ For watching a film. With this function, the projector reproduces pictures faithful to the original film quality. Reset To reset the adjusted data, select Reset and press the SELECT
  • Sanyo PLC-XR301 | Owners Manual - Page 42
    Video Input Screen Size Adjustment This projector has the picture screen resize function, which Wide Provide the image at the 16:9 wide screen ratio. Custom Adjust the screen scale and position manually with this function. Press the Point ► button at Custom and the Custom is displayed on the
  • Sanyo PLC-XR301 | Owners Manual - Page 43
    Setting Setting This projector has a Setting menu that allows you to set up the other various functions described below. 1 Press the MENU button to display the On-Screen Menu.
  • Sanyo PLC-XR301 | Owners Manual - Page 44
    SETUP button on the top control. Off Disables Auto PC Adjustment. Auto Keystone Auto Always works and corrects keystone distortion according to the projector's tilt. Manual . . . Works only when pressing the AUTO SETUP button on the top control or the AUTO SET button on the remote control. Off
  • Sanyo PLC-XR301 | Owners Manual - Page 45
    bright enough. The factory default setting is in this option. Countdown Off....... Show the input image instead of the countdown when turning on the projector. Use this function when you want to project the image as early as possible even when the lamp is not bright enough. Off Hide the
  • Sanyo PLC-XR301 | Owners Manual - Page 46
    Setting Logo (Logo and Logo PIN code lock settings) This function allows you to customize the screen logo with Logo select, capture, Logo PIN code lock and Logo PIN code change functions. Note: When On is selected in the Logo PIN code lock function, Logo select and Capture functions cannot be
  • Sanyo PLC-XR301 | Owners Manual - Page 47
    Then the captured image will be displayed the next time you turn on the projector. To cancel the capture function, select Yes in the "Quit?" confirmation (pp.32, 39). • A signal from a computer can be captured up to XGA (1024 x 768). A signal from video equipment can be captured except for 720p,
  • Sanyo PLC-XR301 | Owners Manual - Page 48
    four-digit number. After entering the four-digit number, move the pointer to Set. Press the SELECT button so that you can start to operate the projector. If PIN code change Logo PIN code can be changed to your desired four-digit number. Press the SELECT button to select Logo PIN code change. Logo
  • Sanyo PLC-XR301 | Owners Manual - Page 49
    reversed. This function is used to project the image from a ceiling-mounted projector. Rear When this function is set to On, the picture will be Rear Terminal The COMPUTER IN 2/MONITOR OUT terminal on the back of the projector is switchable for computer input or monitor output. (See page 9) Select
  • Sanyo PLC-XR301 | Owners Manual - Page 50
    (1~30min). Power management Time left before Lamp is off. Note: Factory default is Ready: 5 min. On start When this function is set to On, the projector will be automatically turned on just by connecting the AC power cord to a wall outlet. Note: • When Standby mode is set to Eco, On start
  • Sanyo PLC-XR301 | Owners Manual - Page 51
    is powered off. Eco Select Eco when you do not use the projector via network. The projector's network function will stop when turning off the projector, you can not turn on the projector via network. Refer to the owner's manual of "Network Set-up and Operation". Note: • Factory default is Network
  • Sanyo PLC-XR301 | Owners Manual - Page 52
    buttons together for 5 seconds or more. After changing the code, make sure the remote control operates properly. Note: • When different codes are set on the projector and on the remote control, any operation cannot be made. In that case, switch the code on the remote control to fit the code on
  • Sanyo PLC-XR301 | Owners Manual - Page 53
    where you purchased the projector or the service center. PIN code lock This function prevents the projector from being operated by cord is connected, the projector can be operated without a PIN code. Whenever you change the PIN code lock setting or the PIN code (the four-digit number), you are
  • Sanyo PLC-XR301 | Owners Manual - Page 54
    choice. Enter a PIN code Change the PIN code The PIN code can be changed to your desired four-digit number. Press the SELECT button to select PIN code change. Pin code dialog box appears, use the Point ▲▼ and keep it securely. If you forget your PIN code, the projector can no longer be started. 54
  • Sanyo PLC-XR301 | Owners Manual - Page 55
    to 2,000 meters above the sea level) where the fans have less cooling effect. On2 Faster than On1 mode. Select this mode when using the projector in higher altitudes (about 2,000 meters to 3,000 meters above the sea level) where the fans have lesser cooling effect. Note: The fan noise becomes
  • Sanyo PLC-XR301 | Owners Manual - Page 56
    when the Display function is set to Off (p.45), during Freeze(p.25), or No show (p.26). warning log This function records anomalous operations while the projector is in operation and use it when diagnosing faults. Up to 10 warning logs are displayed with the latest warning message at the top of
  • Sanyo PLC-XR301 | Owners Manual - Page 57
    Source Information Display The Information Menu is used for checking the status of the image signal being projected and the operation of the projector. Direct Operation Press the INFO. button on the remote control to display the Information Menu. Remote Control Menu Operation Press the Point
  • Sanyo PLC-XR301 | Owners Manual - Page 58
    cannot be turned on and the WARNING indicator still lights red, unplug the AC power cord and contact the service station. CAUTION DO NOT LEAVE THE PROJECTOR WITH THE AC POWER CORD CONNECTED UNDER AN ABNORMAL CONDITION. IT MAY RESULT IN FIRE OR ELECTRIC SHOCK. Top Control WARNING lights red
  • Sanyo PLC-XR301 | Owners Manual - Page 59
    under dusty or smoky conditions, dust may accumulate on a lens, LCD panels, or optical elements inside the projector degrading the quality of a projected image. When the symptoms above are noticed, contact your authorized dealer or service station for proper cleaning. Note: Please be sure to fit
  • Sanyo PLC-XR301 | Owners Manual - Page 60
    a knot in the string to secure it in place. 2 To pass the other end of the string into the hole on the bottom of the projector and pull at it. Cleaning the Projection Lens Unplug the AC power cord before cleaning. Gently wipe the projection lens with a cleaning cloth that contains
  • Sanyo PLC-XR301 | Owners Manual - Page 61
    glass get into your eyes or mouth, seek medical advice immediately. Follow these steps to replace the lamp. 1 Unplug the AC power cord. Let the projector cool for at least 45 minutes. Lamp Cover 2 Loosen the screw and open the lamp cover. 3 Loosen the three (3) screws that secure the lamp. Lift
  • Sanyo PLC-XR301 | Owners Manual - Page 62
    projector ● Replacement Lamp Type No. : PLC-XR301 : POA-LMP132 (Service Parts No. 610 345 2456) LAMP HANDLING PRECAUTIONS This projector IMMEDIATELY after the projector has cooled down. (Follow carefully the instructions in the Lamp Replacement section of this manual.) Continuous use of
  • Sanyo PLC-XR301 | Owners Manual - Page 63
    Appendix Troubleshooting Before calling your dealer or service center for assistance, check the items below once again. -Make sure you have properly connected the projector to peripheral equipment as described on pages 14-16. -Make sure all equipment is connected to AC outlet and the power is
  • Sanyo PLC-XR301 | Owners Manual - Page 64
    signal is correctly output from your computer. Some laptop computers may need to change the setting for monitor output when connecting to a projector. See your computer's instruction manual for the setting. - It takes about 30 seconds to display an image after turning on the
  • Sanyo PLC-XR301 | Owners Manual - Page 65
    16.4'(5 m). - Make sure the code of the remote control is conformed to the projector's code. See page 52. - Unlock the Key lock function for the remote dealer where you purchased the projector or the service code lock, Security key lock center. or Security PIN code lock. 65
  • Sanyo PLC-XR301 | Owners Manual - Page 66
    Appendix WARNING : High voltages are used to operate this projector. Do not attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Specify the model number and explain about the
  • Sanyo PLC-XR301 | Owners Manual - Page 67
    XLow Low Mid High User 0-63 0-63 0-63 0-15 0-15 Yes/No Image 1 Image 2 Image 3 Image 4 Normal True Wide Full Custom Scale H&V Position Common Reset Digital zoom + Digital zoom - H/V On/Off H/V Yes/No Yes/No 67
  • Sanyo PLC-XR301 | Owners Manual - Page 68
    search Off/On1/On2 Auto PC adj. On/Off Auto keystone Auto Manual Off Store/Reset Blue/User/Black Off /On/Countdown off Logo select Off Remote control Code 1-Code 2 Security Fan Fan control Lamp counter Key lock Off Projector Remote control PIN code lock Off/On1/On2 PIN code change L1/L2 Off
  • Sanyo PLC-XR301 | Owners Manual - Page 69
    the AC power cord and plug it again to turn on the projector. If the projector is turned off again, unplug the AC power  cord and contact the dealer or the service center for service and checkup. Do not leave the projector on. It may cause an electric shock or a fire hazard. • • • green
  • Sanyo PLC-XR301 | Owners Manual - Page 70
    Compatible Computer Specifications Basically this projector can accept the signal from SVGA 6 SVGA 7 SVGA 8 SVGA 9 SVGA 10 SVGA 11 MAC 16 MAC 19 XGA 1 XGA 2 XGA 3 XGA 4 XGA 5 XGA 6 XGA 7 XGA 8 XGA 9 XGA 10 XGA 11 XGA 12 XGA 13 XGA 14 XGA 15 SXGA 1 SXGA 2 SXGA 3 SXGA 4 RESOLUTION 640 x 480 720 x 400
  • Sanyo PLC-XR301 | Owners Manual - Page 71
    Projector Type Multi-media Projector Dimensions (W x H x D) 13.13" x 3.35" x 9.72" (333.5mm x 85.2mm x 247.0mm) (Not including protrusions) Net Weight 5.5 lbs (2.5 kg) Foot Adjustment 0˚ to 10˚ Panel Resolution LCD mm ~ 22.06 mm with manual zoom and focus 220 W Interface
  • Sanyo PLC-XR301 | Owners Manual - Page 72
    Manual (CD-ROM) Quick Reference Guide & Safety Manual AC Power Cord Remote Control and Batteries VGA Cable Lens Cap with String PIN Code Label Network Application (CD-ROM) Ferrite core ● The specifications are subject to change without notice. ● LCD characteristics of the LCD panels. Optional Parts
  • Sanyo PLC-XR301 | Owners Manual - Page 73
    and Information System Industries Association). This projector supports all commands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1. For PJ Link password, see the owner's manual of "Network Set-up and Operation." Projector Input Computer 1 Computer 2 Video RGB
  • Sanyo PLC-XR301 | Owners Manual - Page 74
    Appendix Configurations of Terminals COMPUTER IN /COMPONENT IN /MONITOR OUT (ANALOG) Terminal: Analog RGB (Mini D-sub 15 pin) 54 32 1 10 9 8 7 6 15 14 13 12 11 1 Red/Cr/S-C Input/Output 2 Green/Y/S-Y Input/Output 3 Blue/Cb/--- Input/Output 4 ----- 5 Ground (Horiz.sync.) 6 Ground (Red) 7
  • Sanyo PLC-XR301 | Owners Manual - Page 75
    with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. PIN Code Lock No. Factory default set No: 1 2 3 4* Logo PIN Code Lock No. Factory default set No: 4 3 2 1* *Should the four-digit
  • Sanyo PLC-XR301 | Owners Manual - Page 76
    Appendix Dimensions 99.5 (3.92) 333.5 (13.13) 247.0 (9.72) 138.0 (5.43) 10 º MAX 90.0 (3.54) 19.0 (0.75) 90.0 (3.54) Unit: mm(inch) Screw Holes for Ceiling Mount Screw: M4 Depth: 10.0(0.39) 217.0 (8.54) 50.0 (1.97) 10.0 (0.39) 51.0 (2.01) 20.0 (0.79) 9.0 (0.35) 85.2 (3.35) 46.0 (1.81)
  • Sanyo PLC-XR301 | Owners Manual - Page 77
    KM8AD
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
Multimedia Projector
MODEL
PLC-XR301
Owner’s Manual
Network Supported
Refer to the Owner's Manuals below for
details about network function.
□
Network Set-up and Operation
□
PJ Network Manager