Sanyo PLC-XT15A Owners Manual

Sanyo PLC-XT15A - XGA LCD Projector Manual

Get Sanyo PLC-XT15A - XGA LCD Projector PDF manuals and user guides View all Sanyo PLC-XT15A manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo PLC-XT15A manual content summary:

  • Sanyo PLC-XT15A | Owners Manual - Page 1
    Multimedia Projector MODEL PLC-XT10A PLC-XT15A Owner's Manual
  • Sanyo PLC-XT15A | Owners Manual - Page 2
    projector from the power outlet. READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE
  • Sanyo PLC-XT15A | Owners Manual - Page 3
    all warnings and instructions marked on the projector. For added protection to the projector during a lightning storm projector exhibits a distinct change in performance-this indicates a need for service. When replacement parts are required, be sure the service technician has used replacement parts
  • Sanyo PLC-XT15A | Owners Manual - Page 4
    instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Model Numbers Trade Name Responsible party Address Telephone No. : PLC-XT10A, PLC-XT15A : Sanyo : SANYO from the Parts Department indicated in your User Instructions. If the
  • Sanyo PLC-XT15A | Owners Manual - Page 5
    22 SELECTING INPUT SOURCE 22 PREPARATION 7 SELECTING COMPUTER SYSTEM COMPATIBLE COMPUTER SPECIFICATIONS 23 24 PC ADJUSTMENT 25 NAME OF EACH PART OF PROJECTOR 7 AUTO PC ADJUSTMENT 25 SETTING-UP PROJECTOR 8 MANUAL PC ADJUSTMENT 26 CONNECTING AC POWER CORD 8 PICTURE IMAGE ADJUSTMENTS
  • Sanyo PLC-XT15A | Owners Manual - Page 6
    multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. N Compact Design This projector is extremely compact in size and weight. It is designed to carry and work anywhere you wish to use. N Compatibility This projector widely accepts various video
  • Sanyo PLC-XT15A | Owners Manual - Page 7
    NAME OF EACH PART OF PROJECTOR FRONT TOP CONTROLS AND INDICATORS INFRARED REMOTE RECEIVER PROJECTION LENS LENS COVER SPEAKERS AIR INTAKE VENT BACK EXHAUST VENTS TERMINALS AND CONNECTORS HOT AIR EXHAUSTED ! Air blown from Exhaust Vents is hot. When using or installing projector, following
  • Sanyo PLC-XT15A | Owners Manual - Page 8
    into any other type of power system. Consult your authorized dealer or service station if you are not sure of the type of power supply being in use. Connect a projector with a peripheral equipment before turning a projector on. (Refer to pages 11 ~ 13 for connection.) CAUTION For safety, unplug
  • Sanyo PLC-XT15A | Owners Manual - Page 9
    is designed to project on a flat projection surface. G Projector can be focused from 4.1' (1.2m) ~ 32.8' (10.0m). G Refer to figure below to adjust screen size. ROOM LIGHT Brightness in room has a great influence on
  • Sanyo PLC-XT15A | Owners Manual - Page 10
    , and it is not designed to protect an appliance from external forces. Do not transport a projector through a courier or transport services with this cover. The projector can be damaged. When handling a projector, do not drop, bump, subject it to strong forces or put other things on the cabinet
  • Sanyo PLC-XT15A | Owners Manual - Page 11
    /Cb and Pr/Cr jacks. (Refer to P13.) VIDEO INPUT JACK Connect the composite video output from video equipment to connect this jack. (Refer to P13.) USB CONNECTOR (Series B) When controlling the computer with Remote Control Unit of this projector, connect USB port of your personal computer to this
  • Sanyo PLC-XT15A | Owners Manual - Page 12
    CONTROL PORT MONITOR OUT AUDIO OUT R - AUDIO IN - L (MONO) VIDEO S - VIDEO MCI / WI Y - Pb / Cb - Pr / Cr USB USB Use one of these Control Cables corresponding with the terminal of your computer. CONTROL PORT Terminals of the Projector NOTE : When connecting the cable, the power cords of
  • Sanyo PLC-XT15A | Owners Manual - Page 13
    AUDIO IN 2 CONTROL PORT MONITOR OUT AUDIO OUT R - AUDIO IN - L (MONO) VIDEO S - VIDEO MCI / WI Y - Pb / Cb - Pr / Cr USB AUDIO OUT Audio Cable (Stereo) ✽ Video Cable (RCA x 3) ✽ Y - Pb/Cb - Pr/Cr Terminals of the Projector NOTE : When connecting the cable, the power cords of both the
  • Sanyo PLC-XT15A | Owners Manual - Page 14
    as shown in table below depending on Code No. that you want to select remote control code. (Refer to P37.) DIP SWITCH SETTING SW4 ........ LASER ON/OFF KEYSTONE LASER P-TIMERCOMPUTER 1 ZOOM COMPUTER 2 VIDEO FOCUS LENS POWER ON-OFF BUTTON Used to turn projector on or off. (P19) AUTO PC ADJ
  • Sanyo PLC-XT15A | Owners Manual - Page 15
    .4' (5m) and 60° in front and rear of a projector. 60° 16.4' (5 m) COMPUTER 2 BUTTON Used to select input source (COMPUTER 2). (P22, 31) 16.4' VIDEO BUTTON (5 m) Used to select input 60° source (VIDEO). (P31) Remote Control Batteries Installation 1 Remove battery compartment lid. Press lid
  • Sanyo PLC-XT15A | Owners Manual - Page 16
    ready to be turned on. And it flashes green in Power Management mode. (P37) LAMP INDICATOR Becomes dim when the projector is turned on. And it is bright when the projector is in stand-by mode. POINT (VOLUME + / - ) BUTTONS Used to select an item or adjust value in ON-SCREEN MENU. They are
  • Sanyo PLC-XT15A | Owners Manual - Page 17
    can control and adjust this projector through ON-SCREEN MENU. by pressing POINT button(s) on Top Control or on Remote Control Unit. REMOTE CONTROL UNIT AUTO PC ON-OFF D.ZOOM FREEZE LASER P-TIMERCOMPUTER 1 ZOOM COMPUTER 2 KEYSTONE SELECT BUTTON VIDEO Used to select the item. FOCUS LENS FLOW
  • Sanyo PLC-XT15A | Owners Manual - Page 18
    BAR Press MENU BUTTON while connecting to PC input source. GUIDE WINDOW Shows selected item of ONSCREEN MENU. PC SYSTEM MENU Used to change settings of projector or reset Lamp Replace Counter. (Refer to P36, 37) INPUT MENU Used to select input source either Computer or Video. (Refer to P22) PC
  • Sanyo PLC-XT15A | Owners Manual - Page 19
    Press POWER ON-OFF button on Top Control or on Remote Control Unit, and a message "Power off?" appears on a screen. 2 Press POWER ON-OFF button again to turn off the projector. LAMP Indicator lights bright and READY Indicator turns off. After the projector is turned off, Cooling Fans operate (for 90
  • Sanyo PLC-XT15A | Owners Manual - Page 20
    button to make image smaller. Zoom Message disappears after 4 seconds. FOCUS ADJUSTMENT 1 Press FOCUS button on Top Control or FOCUS L/M button on Remote Control Unit. The message "Focus" is displayed. 2 Adjust focus of image by pressing FOCUS L/M button or POINT UP/DOWN button(s) . Focus NOTE
  • Sanyo PLC-XT15A | Owners Manual - Page 21
    any other button. NO SHOW FUNCTION Press NO SHOW button on Remote Control Unit to black out the image. To restore to normal, BASIC OPERATION Message disappears after 4 seconds. P-TIMER FUNCTION Press P-TIMER button on Remote Control Unit. The timer display "00 : 00" appears on the screen and
  • Sanyo PLC-XT15A | Owners Manual - Page 22
    by pressing COMPUTER 1 or COMPUTER 2 button on Remote Control Unit. If projector cannot reproduce proper image, select correct input source computer to Computer 1 (HDB 15-pin) terminal on the projector. INPUT button Computer 1 Computer 2 Video INPUT MENU 1 Press MENU button and ON-SCREEN MENU will
  • Sanyo PLC-XT15A | Owners Manual - Page 23
    "COMPATIBLE COMPUTER SPECIFICATIONS" on page 24). When selecting Computer, this projector automatically tunes manual adjustment is required. (Refer to P26 and 27.) There is no signal input from computer. Make sure the connection of computer and a projector is set correctly. (Refer to TROUBLESHOOTING
  • Sanyo PLC-XT15A | Owners Manual - Page 24
    COMPUTER INPUT COMPATIBLE COMPUTER SPECIFICATIONS Basically this projector can accept the signal from all 600 H-Freq. (kHz) 31.469 37.879 V-Freq. (Hz) 59.940 60.317 NOTE : Specifications are subject to change without notice. ON-SCREEN DISPLAY RESOLUTION D-XGA 1024 x 768 H-Freq. (kHz) 48.
  • Sanyo PLC-XT15A | Owners Manual - Page 25
    Control or on Remote Control Unit. Store adjustment parameters. Adjustment parameters from Auto PC Adjustment can be memorized in this projector. Once parameters function. When the image is not provided properly through this function, manual adjustments are required. (Refer to page 26, 27.) G Auto
  • Sanyo PLC-XT15A | Owners Manual - Page 26
    to precisely adjust several parameters to match with those special signal formats. This projector has 5 independent memory areas to memorize those parameters manually adjusted. This enables you to recall the setting for a specific computer whenever you use it. Note : This PC ADJUST Menu cannot be
  • Sanyo PLC-XT15A | Owners Manual - Page 27
    SELECT button at Display area icon and Display area dialog box appears. Display area Display area V Adjustment of vertical area displayed with this projector. Press POINT LEFT/RIGHT button(s) to decrease/increase value and then press SELECT button. Full screen Press POINT LEFT/RIGHT button(s) to
  • Sanyo PLC-XT15A | Owners Manual - Page 28
    2, Image 3 and Image 4 by pressing IMAGE button on Top Control or on Remote Control Unit. Standard Normal picture level preset on this projector. Real Picture level with improved halftone for graphics. IMAGE 1~4 User preset picture adjustment in IMAGE ADJUST Menu (P29). IMAGE button Standard Real
  • Sanyo PLC-XT15A | Owners Manual - Page 29
    0 to 63.) Gamma Press either POINT LEFT button or POINT RIGHT button to obtain better balance of contrast. (From 0 to 15.) 3 Store To store manually preset image, move a red frame pointer to Store icon and press SELECT button. Image Level Menu will appear. Move a red frame pointer to the Image
  • Sanyo PLC-XT15A | Owners Manual - Page 30
    screen size (1024 x 768), this projector enters "Digital zoom +" mode automatically. Wide Provides image to fit wide video aspect ratio (16 : 9) by . A projected image can be also expanded by pressing D.ZOOM L button on Remote Control Unit. Digital Zoom - When Digital zoom - is selected, ON-SCREEN
  • Sanyo PLC-XT15A | Owners Manual - Page 31
    OPERATION Select INPUT source by pressing INPUT button on Top Control. Select INPUT source by pressing COMPUTER 1 or VIDEO button on Remote Control Unit. If projector cannot reproduce proper image, select correct input source through MENU OPERATION (see below). MENU OPERATION When connecting to
  • Sanyo PLC-XT15A | Owners Manual - Page 32
    , and adjusts itself to optimize its performance. When Video System is PAL-M or PAL-N, select system manually. PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N If projector cannot reproduce proper video image, it is necessary to select a specific broadcast signal format among PAL, SECAM, NTSC, NTSC
  • Sanyo PLC-XT15A | Owners Manual - Page 33
    Image 3 and Image 4 by pressing IMAGE button on Top Control or on Remote Control Unit. Standard Normal picture level preset on this projector. Cinema Picture level adjusted for the picture with fine tone. IMAGE 1~4 User preset picture adjustment in IMAGE ADJUST Menu (P34, 35). IMAGE button Standard
  • Sanyo PLC-XT15A | Owners Manual - Page 34
    Dialog box display is changed to "On" to reduce noise (rough parts) of image. Press POINT LEFT/RIGHT button(s) again, to change noise button at this icon to store the value. NOTE : Tint cannot be adjusted when the video system is PAL, SECAM, PAL-M or PAL-N. Progressive cannot be operated when "480p",
  • Sanyo PLC-XT15A | Owners Manual - Page 35
    be set and then press SELECT button. PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display want to select and then press SELECT button. Normal Provides image at a normal video aspect ratio of 4 : 3. Wide Provides image at a wide screen ratio of
  • Sanyo PLC-XT15A | Owners Manual - Page 36
    on page 20. When pressing SELECT button at Language, Language Menu appears. Blue back When this function is "On," this projector will produce a blue image instead of the video noise on the screen when any input source is unplugged or turned off. Display This function decides whether to display On
  • Sanyo PLC-XT15A | Owners Manual - Page 37
    5 minutes). 2. After counting down for 5 minutes, Projection Lamp and READY Indicator are turned off. (Cooling Fans keep running remote control operation mixture (jam) when operating several projectors or video equipment together. For example operating projector in "Code 7," both projector and Remote
  • Sanyo PLC-XT15A | Owners Manual - Page 38
    SCREW HANDLE LAMP ASSEMBLY ORDER REPLACEMENT LAMP Replacement Lamp can be ordered through your dealer. When ordering a Projection Lamp, give the following information to the dealer. G Model No. of your projector : G Replacement Lamp Type No. : PLC-XT10A/PLC-XT15A POA-LMP59 (Service Parts No
  • Sanyo PLC-XT15A | Owners Manual - Page 39
    a new one IMMEDIATELY after the projector has cooled down. ( Follow carefully the instructions in the LAMP REPLACEMENT section of this manual. ) Continuous use of the lamp with the LAMP REPLACE INDICATOR lighted may increase the risk of lamp explosion. G A Lamp may explode as a result of vibration
  • Sanyo PLC-XT15A | Owners Manual - Page 40
    USB port) of your computer to Control Port (or USB connector) of this projector with Control Cable (or USB cable). (Refer to page 11, 12 for connection.) 2 Turn the projector ON/OFF button, DRAG ON INDICATOR lights green and the remote control is in Drag mode. Use the POINT button in VIDEO FOCUS LENS
  • Sanyo PLC-XT15A | Owners Manual - Page 41
    listed below. 1 Ventilation Slots of the projector may be blocked. In such an event, reposition the projector parts into Air Intake Vents. It may result in malfunction of the projector. RECOMMENDATION We recommend avoiding dusty/smoky environments when operating a projector or service station for
  • Sanyo PLC-XT15A | Owners Manual - Page 42
    APPENDIX TROUBLESHOOTING Before calling your dealer or service center for assistance, check the matters below once again. 1. Make sure you have connected a projector to your computer or video equipment as described in the section "CONNECTING PROJECTOR" on pages 11 ~ 13. 2. Check cable connection.
  • Sanyo PLC-XT15A | Owners Manual - Page 43
    problem still persists after following all operating instructions, contact the sales dealer where you purchased the projector or the service center. Give the model number and explain the difficulty. We will advise you how to obtain service. This symbol on the nameplate means the product is Listed
  • Sanyo PLC-XT15A | Owners Manual - Page 44
    Class II Laser (Max. Output : 1mW / Wave length : 650±20nm) Owner's Manual AC Power Cord Remote Control Unit and Batteries VGA Cable USB Cable Control Cable for Serial port DVI/VGA Adapter Protective Dust Cover Lens Cover G The specifications are subject to change without notice. G LCD panels are
  • Sanyo PLC-XT15A | Owners Manual - Page 45
    Vert. sync 16 Hot Plug Detect 24 T.M.D.S. Clock- CONTROL PORT CONNECTOR Terminal : Mini DIN 8-PIN Pin Configuration 876 5 43 21 USB CONNECTOR (Series B) Pin Configuration 21 34 PS/2 Serial ADB 1 ----- R X D ----- 2 CLK ----- ADB 3 DATA ----- ----- 4 GND GND GND 5 ----- RTS / CTS
  • Sanyo PLC-XT15A | Owners Manual - Page 46
    OPTIONAL PARTS The parts listed below are optionally supplied. When ordering those parts, give the name and Type No. to the sales dealer. G Control Cable (PS2 Port) G Control Cable (ADB Port) G MAC Adapter G HDB 15 pin-SCART 21
  • Sanyo PLC-XT15A | Owners Manual - Page 47
    47
  • Sanyo PLC-XT15A | Owners Manual - Page 48
    Printed in Japan Part No. 610 305 8269 (1AA6P1P3934-- MC3AB) SANYO Electric Co., Ltd
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
Owner’s Manual
PLC-XT10A
Multimedia Projector
MODEL
PLC-XT15A