Sanyo PLC-XU116 RS232C Expand

Sanyo PLC-XU116 - 4500 Lumens Manual

Get Sanyo PLC-XU116 - 4500 Lumens PDF manuals and user guides
UPC - 086483077647
View all Sanyo PLC-XU116 manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo PLC-XU116 manual content summary:

  • Sanyo PLC-XU116 | RS232C Expand - Page 1
    EXPAND SERIAL COMMAND FUNCTIONAL SPECIFICATIONS PLC-XU116 Ver. 1.00 SANYO Electric Co., Ltd DS Company Projector Division
  • Sanyo PLC-XU116 | RS232C Expand - Page 2
    PLC-XU116 Expand Serial Command Functional Specifications - CONTENTS 1. Overview ...8 2. Serial Interface Specification 8 2.1 Command Table 13 6.3 Video Status Read Command Table 13 6.4 Input Status Read Command Table 13 6.5 Screen Status Read Command Table 14 6.6 Lamp Status Read Command
  • Sanyo PLC-XU116 | RS232C Expand - Page 3
    PLC-XU116 Expand Serial Command Functional Specifications 8.4.9 CF_PROGV Command 20 8.4.10 CF_NZRED Command 20 8.4.11 CF_IMAGE Command 21 10 CF_VSCALE Command 32 8.7.11 CF_VPOS Command 33 8.7.12 CF_HSCALE Command 33 8.7.13 CF_HPOS Command 34 8.8 Lamp Command 35 8.8.1 CF_LAMPH Command 35 3/72
  • Sanyo PLC-XU116 | RS232C Expand - Page 4
    PLC-XU116 Expand Serial Command Functional Specifications 8.8.2 CF_LAMPMODE Command 35 8.9 Sound Command 36 8.9.1 CF_VOLUME Command 36 8.9.2 CF_MUTE Command 36 8.10 Setting Command 37 8.10.1 CF_LANG Command 37 8.
  • Sanyo PLC-XU116 | RS232C Expand - Page 5
    PLC-XU116 Expand Serial Command Functional Specifications 9.1 Format ...47 9.2 Transfer Example 47 9.3 Command 52 9.5.6 CR_DDOTS Command 52 9.5.7 CR_DLINE Command 52 9.5.8 CR_PCSTORE Command 52 9.6 Video Status Read Command 53 9.6.1 CR_SERSYS Command 53 9.7 Input Status Read Command 54
  • Sanyo PLC-XU116 | RS232C Expand - Page 6
    PLC-XU116 Expand Serial Command Functional Specifications 9.8 Screen Status Read Command 58 9.8.1 CR_SCREEN Command 58 9.8.5 CR_VPOS Command 59 9.8.6 CR_HSCALE Command 59 9.8.7 CR_HPOS Command 59 9.9 Lamp Status Read Command 60 9.9.1 CR_LAMPREPL Command 60 9.9.2 CR_LAMPH Command 60 9.9.3
  • Sanyo PLC-XU116 | RS232C Expand - Page 7
    PLC-XU116 Expand Serial Command Functional Specifications 9.11.21 CR_PJLOCKNOW Command 67 9.11.22 CR_PJLOCKMENU Command 67 9.11.23 CR_FANMODE Command 67 9.11.24 CR_FANCONTROL Command 67 9.
  • Sanyo PLC-XU116 | RS232C Expand - Page 8
    for PLC-XU116. 1.2 Compatible to Firmware Ver. 1.x of the projector. 1.3 Most commands can be used to control projector remotely be changed in service mode. 2.2 Connection Dedicated serial cable must be used for a connection to a computer and a projector. PC COM 1 Projector Control Port (D-Sub
  • Sanyo PLC-XU116 | RS232C Expand - Page 9
    PLC-XU116 Expand Serial Command Functional Specifications 3. Notes for communication 1. Expand not executed. When it takes more than one second to receive carriage return (0X0D) after the projector receives the first data "C", it clears the information of buffer. 4. On command pipelining, wait
  • Sanyo PLC-XU116 | RS232C Expand - Page 10
    PLC-XU116 Expand Serial Command Functional Specifications 5. Functional Execution Command Table 5.1 Image Select computer-2 and set Input selected in %1 Select Video and set Input selected in %1 Select S-video and set Input selected in %1 Select Network and set Input selected in %1 Select Input and
  • Sanyo PLC-XU116 | RS232C Expand - Page 11
    PLC-XU116 Correct bottom-right corner Select test pattern for Corner correction. Set Lamp Command Table Execute command CF_LAMPH_%1[CR] CF_LAMPMODE_%1[CR] Item Reset Lamp use time Select Lamp color of Closed caption Select Remote Control Reception Code Disable RC/Projector keys Input PIN code to
  • Sanyo PLC-XU116 | RS232C Expand - Page 12
    PLC-XU116 Expand Serial Command Functional Specifications 5.8 Other Command Table Execute command CF_KEYEMU_%1[CR] CF_MENU_%1[CR] CF_POWER_%1[CR] CF_FREEZE _%1[CR] CF_VMUTE _%1[CR] CF_PTIMER _%1[CR] Item Behave the same as corresponding key of projector top panel Switch ON/OFF of each Menu. Switch
  • Sanyo PLC-XU116 | RS232C Expand - Page 13
    PLC-XU116 Expand Serial Command Functional Specifications 6. Status Read Command Table 6.1 Image Status 1 Get selected source of Computer 2 Get selected source of Video Get selected source of S-video Get selected source of Network Get selected system status in Input mode Get selectable System table
  • Sanyo PLC-XU116 | RS232C Expand - Page 14
    PLC-XU116 Get setting status of Test pattern for Coner correction. Lamp replacement time Get lamp total running time Get corresponding lamp use time Get Lamp Mode status Get lamp lighting status Get projector total running time Get lamp of Closed caption Get selected Remote Control Code Get setting
  • Sanyo PLC-XU116 | RS232C Expand - Page 15
    PLC-XU116 Expand Serial Command Functional Specifications 6.9 Other Status Read Command Status read command CR_STATUS[CR] CR_SIGNAL[CR] CR_VMUTE[CR] CR_FREEZE[CR] CR_PTIMER[CR] CR_TEMPWARN[CR] CR_TEMP[CR] CR_TEMPFAIL[CR] Item Get setting status of Projector behavior Get Signal Status if there is a
  • Sanyo PLC-XU116 | RS232C Expand - Page 16
    PLC-XU116 Expand Serial Command Functional Specifications 7. Error Code Table Error Code ? 101 Contents -When the received data cannot be decoded -Parameter determination error (digit number error,
  • Sanyo PLC-XU116 | RS232C Expand - Page 17
    PLC-XU116 Expand Serial Command Functional Specifications 8. Functional Execution Command 8.1 Format 1. PC %1 : Parameter (Character line) _ : Space (To separate COMMAND and Parameter) 2. The projector decodes the received command and when it is ready to receive the next command, it returns the
  • Sanyo PLC-XU116 | RS232C Expand - Page 18
    PLC-XU116 Expand Serial Command Functional Specifications 8.4 Image Command 8.4.1 CF_BRIGHT Command Command setting value - 1 Details Set Color value of user control The value set by this command will not be saved to projector. Therefore, when turning into Stanby status or ALL is OFF, the value
  • Sanyo PLC-XU116 | RS232C Expand - Page 19
    1 "DN Current Color value set by White Balance%1 - 1 Details Set Color value set by White Balance%1 of user control The value set by this command will not be saved to projector. Therefore, when turning into Stanby status or ALL is OFF, the value returns to original setting. (The value is held in
  • Sanyo PLC-XU116 | RS232C Expand - Page 20
    PLC-XU116 Expand Serial Command Functional Specifications 8.4.8 CF_COLTEMP Command Command "CF_COLTEMP_%1"[CR] "000" blur in moving image The value set by this command will not be saved to projector. Therefore, when turning into Stanby status or ALL is OFF, the value returns to original setting.
  • Sanyo PLC-XU116 | RS232C Expand - Page 21
    PLC-XU116 Expand Serial Command Functional Specifications 8.4.11 CF_IMAGE Command Command "CF_IMAGE_%1"[CR] user) "CUSTOM2" ----- Image2 (the value set and stored by a user) "CUSTOM3" ----- Image3 (the value set and stored by a user) "CUSTOM4" ----- Image4 (the value set and stored by a user)
  • Sanyo PLC-XU116 | RS232C Expand - Page 22
    PLC-XU116 not be saved to projector. Therefore, when turning into Stanby status or ALL is OFF, the value returns to original setting. This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "101"[CR] ---- when Input for Video
  • Sanyo PLC-XU116 | RS232C Expand - Page 23
    PLC-XU116 turning into Stanby status or ALL is OFF, the value returns to original setting. This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "101"[CR] ---- when Input for Video will not be saved to projector. Therefore, when turning into Stanby status or
  • Sanyo PLC-XU116 | RS232C Expand - Page 24
    PLC-XU116 Expand value set by this command will not be saved to projector. Therefore, when turning into Stanby status or ALL is OFF, the value returns "[CR] Response Unacceptable "101"[CR] ---- When Input for Video is selected 8.5.9 CF_PCMODEFREE Command Command "CF_PCMODEFREE_%1"[CR] "MODE1"
  • Sanyo PLC-XU116 | RS232C Expand - Page 25
    PLC-XU116 Expand Serial Command Functional Specifications 8.6 Input Control Command 8.6.1 CF_INPUT Command Command "CF_INPUT_%1"[CR] "CONPUTER1" ----- Select Computer1 Input "COMPUTER2" ----- Select Computer2 Input "VIDEO Select Video Input "S-VIDEO Select S-video %1 "NETWORK" --------
  • Sanyo PLC-XU116 | RS232C Expand - Page 26
    PLC-XU116 Expand Serial video Input Details Select S-Video input. This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.6.7 CF_INPUT5 Command Command "CF_INPUT5 _%1"[CR] %1 "Network" ------ Select Network Details Select Network
  • Sanyo PLC-XU116 | RS232C Expand - Page 27
    PLC-XU116 Expand Serial Command Functional Specifications 8.6.8 CF_INPUT_%1_%2 Command Command "CF_INPUT_%1_%2"[CR] "COMPUTER1" ------ Select Computer1 Input %1 "COMPUTER2" ------ Select Computer2 Input "VIDEO Select Analog Input "S-VIDEO Select S-video Input When %1 is COMPUTER1 "ANALOG"
  • Sanyo PLC-XU116 | RS232C Expand - Page 28
    PLC-XU116 Expand Input specified by %1 is inappropriate for selected Input, the projector returns "101"[CR] and the command is not executed NTSC4.43" / "PAL" / "SECAM" / "PAL-M" / "PAL-N" is available only when Input is VIDEO / S-VIDEO Note2) "1080I" / "1035I" / "720P" / "575P" / "480P" / "575I" /
  • Sanyo PLC-XU116 | RS232C Expand - Page 29
    PLC-XU116 backward * Custom → Full → Wide → True → Normal Input is Video "NORMAL Select Normal mode "WIDE Select Wide mode "CUSTOM Select Custom screen. When Input specified by %1 is inappropriate for selected Input, the projector returns "101" [CR] and the command is not executed. "DZOOM
  • Sanyo PLC-XU116 | RS232C Expand - Page 30
    PLC-XU116 Expand Serial Command Functional Specifications 8.7.3 CF_KEYSTONE Command Command " Available in normal Power ON status only) The correction starts with the first command received Projector returns error code ""101 and no operation is made when exceeding the correction limit,
  • Sanyo PLC-XU116 | RS232C Expand - Page 31
    PLC-XU116 Expand Serial Command Functional Specifications 8.7.6 CF_CORNER-UR Command Command "CF_CORNER Available in normal Power ON status only) The correction starts with the first command received Projector returns error code ""101 and no operation is made when exceeding the correction limit,
  • Sanyo PLC-XU116 | RS232C Expand - Page 32
    PLC-XU116 Expand Serial Command Functional Specifications 8.7.9 CF_CORNERTESTPAT Command Command "CF_CORNERTESTPAT_%1"[CR] "RED Select Red %1 "WHITE" -------- Select White "BLUE Select Blue "OFF Select Off Details Display test patterns for Correctcorrection. (Available in normal Power ON
  • Sanyo PLC-XU116 | RS232C Expand - Page 33
    PLC-XU116 Expand Serial Command Functional Specifications 8.7.11 CF_VPOS Command Command "CF_VPOS_%1"[CR] "015 15 "014 is not in Custom mode, projector changes image mode into Custom by receiving this command. Note2) When there is no signal detected, projector returns 101 and the command does
  • Sanyo PLC-XU116 | RS232C Expand - Page 34
    PLC-XU116 Expand Serial Command Functional Specifications 8.7.13 CF_HPOS Command Command "CF_HPOS_%1"[CR] "015 15 "014 is not in Custom mode, projector changes image mode into Custom by receiving this command. Note2) When there is no signal detected, projector returns 101 and the command does
  • Sanyo PLC-XU116 | RS232C Expand - Page 35
    PLC-XU116 Expand Serial Command Functional Specifications 8.8 Lamp Command 8.8.1 CF_LAMPH Command Command "CF_LAMPH_%1"[CR] %1 "RST" Details Reset Lamp use time counter. (Available in normal Power ON status only). Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.8.2 CF_LAMPMODE
  • Sanyo PLC-XU116 | RS232C Expand - Page 36
    PLC-XU116 Expand Serial Command Functional Specifications 8.9 Sound Command 8.9.1 CF_VOLUME Command Command setting value -1 Details Control Volume value The same operation of Volume Up/Down as projector and RC, and directly select Volume setting value. When setting Volume value, the Sound
  • Sanyo PLC-XU116 | RS232C Expand - Page 37
    PLC-XU116 Expand Serial Command Functional Specifications 8.10 Setting Command 8.10.1 CF_LANG Command Note) It is unable to set Keystone, PC ADJ. and Input search to OFF at once. e.g. If projector receives Auto PC ADJ. OFF command while Keystone and Input search are OFF, it returns error code "101
  • Sanyo PLC-XU116 | RS232C Expand - Page 38
    PLC-XU116 Expand Serial Command Functional Specifications 8.10.4 CF_AUTOSETUPKEYSTONE Command Command "CF_AUTOSETUPKEYSTONE_%1"[CR] "AUTO Set Auto Keystone function to Auto %1 "MANUAL Set Auto Keystone function to Manual e.g. If projector receives Input turned to ALL OFF status. *When 1="USER
  • Sanyo PLC-XU116 | RS232C Expand - Page 39
    PLC-XU116 Expand Serial Command Functional Specifications 8.10.8 CF_DISP Command Command "CF_DISP_ , but it does not release LOGO LOCK. (LOGO LOCK continues.) Response Projector returns Error Code "101" by receiving USER in %2 when capture has not operated. Acceptable "000"[CR] Unacceptable "
  • Sanyo PLC-XU116 | RS232C Expand - Page 40
    PLC-XU116 Expand Serial Command Functional Specifications 8.10.10 CF_USBTERMINAL Command Command "CF_USBTERMINAL_%1"[CR] %1 "DISPLAY Select Display "MOUSE Select Mouse control Details Switch usage of USB terminal.
  • Sanyo PLC-XU116 | RS232C Expand - Page 41
    PLC-XU116 Expand Serial Command Functional Specifications 8.10.14 CF_P-MANE Command Command " "CF_STANDBYMODE_%1"[CR] %1 "ECO Less standby electricity "NORMAL Normal standby electricity (Selecting NETWORK) Details Switch Standby Mode setting. This command is available in normal Power ON
  • Sanyo PLC-XU116 | RS232C Expand - Page 42
    PLC-XU116 available under conditions below; Entered signal is appropriate (Video, NTSC signal of S-video, Component=480i) and System is fixed to NTSC Switch Code setting of Remote Control backward (Code8 → Code7 → Code6... → Code1 → Code8) Details Select Code of Remote Control The status set
  • Sanyo PLC-XU116 | RS232C Expand - Page 43
    PLC-XU116 Expand Serial Command Functional Specifications 8.10.21 CF_KEYDIS Command Command "CF_KEYDIS_%1"[CR] "NONE RC & Projector keys are valid (All are valid) %1 "RC RC keys are invalid "KEY Projector keys are invalid Details Diable RC/Projector command everytime lamp turns on.
  • Sanyo PLC-XU116 | RS232C Expand - Page 44
    PLC-XU116 Expand Serial Command Functional Specifications 8.10.24 CF_FANCONTROL Command Command "CF_FANCONTROL_%1"[CR] "OFF Set Fan control to Off %1 "ON1 Set Fan control to On1 "ON2
  • Sanyo PLC-XU116 | RS232C Expand - Page 45
    PLC-XU116 Expand Serial Command Functional Specifications 8.11 Other Command 8.11.1 CF_KEYENU Command Details This command behave the same as corresponding keys of Remote Control / Projector Auto PC adj. keeps operating even though projector receives this command again while Auto PC adj. is in
  • Sanyo PLC-XU116 | RS232C Expand - Page 46
    PLC-XU116 Expand Serial Command Functional Specifications 8.11.4 CF_FREEZE Command Command "CF_FREEZE_%1"[CR] "ON Display / Suspend / Cancel P-TIMER This command behaves the same as "P-TIMER" key of Remote Control / Projector. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 46/72
  • Sanyo PLC-XU116 | RS232C Expand - Page 47
    PLC-XU116 Expand Serial Command Functional Specifications 9. Status Read Command 9.1 Format 1) PC issues commands in format as below: "CR_Command" [CR] Command : Character Line 2) When projector receives the appropriate command, it returns a character line as the required data "000 "%1 [CR] %1:
  • Sanyo PLC-XU116 | RS232C Expand - Page 48
    PLC-XU116 Expand Serial Command Functional Specifications 9.4 Image Status Read Command 9.4.1 CR_BRIGHT Command Command "CR_BRIGHT"[CR] Details Get Brightness value of user control Acceptable "000_ "[CR] Response %a "000"~"063" Unacceptable "Error Code"[CR] 9.4.2 CR_CONT Command Command "
  • Sanyo PLC-XU116 | RS232C Expand - Page 49
    PLC-XU116 Expand Serial Command Functional Specifications 9.4.6 CR_GAMMA Command Command "CR_GAMMA"[CR] Details Get Gamma value of user control Acceptable "000_%a"[CR] Response %a "000"~"015" Unacceptable "Error Code"[CR] 9.4.7 CR_WBAL - R Command Command "CR_WBAL-R"[CR] Details Get White
  • Sanyo PLC-XU116 | RS232C Expand - Page 50
    PLC-XU116 Expand Serial Command Functional Specifications 9.4.11 CR_NZRED Command Command "CR_NZRED"[CR] Details Get setting status of Noise Reduction Acceptable "000_%1"[CR] "L1" -------- Noise Reduction for
  • Sanyo PLC-XU116 | RS232C Expand - Page 51
    PLC-XU116 Expand Serial Command Functional Specifications 9.5 PC Adjust Status Read Command 9.5.1 CR_FSYNC Command Command "CR_FSYNC"[CR] Details Get Fine Sync value Acceptable "000_%a"[CR] Response %a Unacceptable "
  • Sanyo PLC-XU116 | RS232C Expand - Page 52
    PLC-XU116 Expand Serial Command Functional Specifications 9.5.5 CR_V - POS Command Command "CR_V - POS"[CR] Details Get Vertical Position value Acceptable "000_%a"[CR] Response %a Unacceptable "0000"~"nnnn" (nnnn =
  • Sanyo PLC-XU116 | RS232C Expand - Page 53
    PLC-XU116 Expand Serial Command Functional Specifications 9.6 Video Status Read Command 9.6.1 CR_SERSYS Command Command "CR_SERSYS"[CR] Details Get currently selected signal Returns auto-detected signal in Auto mode Only available for Video input. (N/A when Input is computer) Acceptable "000_
  • Sanyo PLC-XU116 | RS232C Expand - Page 54
    PLC-XU116 Expand Serial Command Functional Specifications 9.7 Input Status Read Command 9.7.1 CR_INPUT "HDCP HDCP is selected "VIDEO Video Input is selected "S-VIDEO S-Video Input is selected "YPBPR Component Input is selected "NETWORK" ------- Network is selected Unacceptable "Error Code
  • Sanyo PLC-XU116 | RS232C Expand - Page 55
    PLC-XU116 Expand Serial Command Functional Specifications 9.7.6 CR_SRCINP4 Command Command "CR_SRCINP4" [CR] Details Get selected source of Input 4_S-video Acceptable "000_%1"[CR] Response Request data "S VIDEO" -------- S-Video Input is selected Unacceptable "Error Code"[CR] 9.7.7 CR_SRCINP5
  • Sanyo PLC-XU116 | RS232C Expand - Page 56
    PLC-XU116 Expand Input is PC-Digital/ AV-HDCP Input is Y,Pb/Cb,Pr /Cr Input is Video,S-Vi deo "D WXGA3 D-WXGA3 is selected "D 1080I D-1080i is selected "D 1035I Projector returns selected System status regardless of the signal input. Input is Network "NETWORK Network is selected Projector
  • Sanyo PLC-XU116 | RS232C Expand - Page 57
    PLC-XU116 Expand Serial Command Functional Specifications 9.7.9 CR_SYSLIST Command Command "CR_SYSLIST"[CR] Details Get selectable System titles Acceptable "000_%1_%2_..._%x" [CR] - When Input is PC-Analog "XGA1 XGA1is selectable "1080I 1080i is selectable Projector does not return Auto,Mode1-5
  • Sanyo PLC-XU116 | RS232C Expand - Page 58
    PLC-XU116 Expand Serial to D.Zoom, projector returns the previous status (NORMAL ) Input "NORMAL Normal mode is selected is "WIDE Wide is selected Video "CUSTOM Custom size "WHITE White is selected "BLUE Blue is selected "OFF Test patter is Off Unacceptable "Error Code"[CR] 9.8.4 CR_VSCALE
  • Sanyo PLC-XU116 | RS232C Expand - Page 59
    PLC-XU116 Expand Serial Command Functional Specifications 9.8.5 CR_VPOS Command Command "CR_VPOS"[CR] Details Get setting status of Vertical Position Store Mode Acceptable "000_%1"[CR] Response %1 "-15" ~ "015"
  • Sanyo PLC-XU116 | RS232C Expand - Page 60
    PLC-XU116 Expand Serial Command Functional Specifications 9.9 Lamp Status Read Command 9.9.1 CR_LAMPREPL Command Command "CR_LAMPREPL"[CR] Details Get information of Lamp Replacement time Acceptable "000_%1"[CR] "1Y Over lamp replacement time "1N Within lamp replacement time Response %1 "1"
  • Sanyo PLC-XU116 | RS232C Expand - Page 61
    PLC-XU116 Expand Serial Command Functional Specifications 9.9.5 CR_LAMPMSTS Command Command "CR_LAMPSTS"[CR] Details Get Lighting status of lamp Acceptable "000_%1"[CR] " **** " A number of * should be among 1-4. First character shows how many lamps are incorporated in projector. (1,2 or 4 )
  • Sanyo PLC-XU116 | RS232C Expand - Page 62
    PLC-XU116 Expand Serial Command Functional Specifications 9.10 Sound Status Read Command 9.10.1 CR_VOLUME Command Command "CR_VOLUME"[CR] Details Get Volume value of user control Acceptable "000_%a"[CR] Response %a "000"~"063" Unacceptable "Error Code" [CR] 9.10.2 CR_MUTE Command Command
  • Sanyo PLC-XU116 | RS232C Expand - Page 63
    PLC-XU116 Expand Serial Command Functional Specifications 9.11 Setting Status Read Command 9.11.1 Auto setup Acceptable "000_%a"[CR] "AUTO Auto Keystone is Auto Response %a "MANUAL Auto Keystone is Manual "OFF Auto Keystone is OFF Unacceptable "Error Code"[CR] 9.11.4 CR_INPUTSEARCH
  • Sanyo PLC-XU116 | RS232C Expand - Page 64
    PLC-XU116 Expand Serial Command Functional Specifications 9.11.5 CR_BACKGND Command Command "CR_BACKGND" [CR] Details Get setting status of Screen for no signal Acceptable "000_%1" [CR] Response "BLUE Blue Back is selected %1 "USER User is selected "BLACK Black Back is selected
  • Sanyo PLC-XU116 | RS232C Expand - Page 65
    PLC-XU116 Expand Serial Command Functional Specifications 9.11.10 CR_REAR Command Command "CR_REAR" [CR] Details Get setting status of Rear Acceptable "000_%1"[CR] Response %1 "ON Rear is
  • Sanyo PLC-XU116 | RS232C Expand - Page 66
    PLC-XU116 Expand Serial Command Functional Specifications 9.11.15 CR_STANDBYMODE Command Command "CR_STANDBYMODE" [CR] Details Get Standby Mode setting status Acceptable "000_%a"[CR] Response %a "ECO Eco Mode "NORMAL" -------- Normal Mode(Network Get selected Remote Control Code Acceptable
  • Sanyo PLC-XU116 | RS232C Expand - Page 67
    PLC-XU116 Expand Serial Command Functional Specifications 9.11.20 CR_KEYDIS Command Command "CR_KEYDIS"(CR) Details Get disablility status of RC/Projector keys (valid or invalid) Acceptable "000_%a"[CR] "NONE RC / Projector keys are valid Response %a "RC RC keys are invalid "KEY
  • Sanyo PLC-XU116 | RS232C Expand - Page 68
    PLC-XU116 Expand Serial Command Functional Specifications 9.11.25 CR_FILH Command Command "CR_FILH"[CR] Details Get Filter used time Acceptable "000_%1"[CR] Response %1 "00000"~"99999 0 hour to
  • Sanyo PLC-XU116 | RS232C Expand - Page 69
    PLC-XU116 Expand Serial Command Functional Specifications 9.12 Other Status Read Command 9.12.1 CR_STATUS Command Command "CR_STATUS"(CR) Details Get status of Projector Lamp failure "81"= Stand by after Cooling down due to Lamp " -------- No Show is ON, User Logo (My picture) is displayed
  • Sanyo PLC-XU116 | RS232C Expand - Page 70
    PLC-XU116 Expand Serial Command Functional Specifications 9.12.5 CR_PTIMER Command Command "CR_PTIMER"[ ] 9.12.6 CR_TEMPWARN Command Command "CR_TEMPWARN"[CR] Details Get the temperature inside a projector and its condition if it is abnormal temperature or close to abnormal temperature If there
  • Sanyo PLC-XU116 | RS232C Expand - Page 71
    PLC-XU116 Expand Serial Command Functional Specifications 9.12.7 CR_TEMP Command Command "CR_TEMP"[CR] Details Get current temperature inside a projector. such as "_00.0E". Some of the projectors get abnormal temperature because of heat of Lamp ballast in Standby mode or Powering ON. Therefore
  • Sanyo PLC-XU116 | RS232C Expand - Page 72
    PLC-XU116 Expand Serial Command Functional Specifications 9.12.8 CR_TEMPFAIL Command Command "CR_TEMPFAIL"[CR] Details Get the temperature inside a projector when abnormal temperature occurs. If there are several sensors installed, it is possible to get information from all the sensors at once.
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
EXPAND SERIAL COMMAND
FUNCTIONAL SPECIFICATIONS
PLC-XU116
Ver. 1.00
SANYO Electric Co., Ltd
DS Company
Projector Division