Sanyo PLC-XU25 Owners Manual

Sanyo PLC-XU25 - XGA LCD Projector Manual

Get Sanyo PLC-XU25 - XGA LCD Projector PDF manuals and user guides View all Sanyo PLC-XU25 manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo PLC-XU25 manual content summary:

  • Sanyo PLC-XU25 | Owners Manual - Page 1
    Multimedia Projector MODEL PLC-XU25 Owner's Manual
  • Sanyo PLC-XU25 | Owners Manual - Page 2
    Cabinet 42 15 Lamp Replacement 43 15 Lamp Replace Counter 44 16 Appendix 45 16 16 17 18 Troubleshooting Indicators and Projector Condition Menu Tree Compatible Computer Specifications 45 47 48 50 Technical Specifications 51 19 Configurations of Terminals 52 Optional Parts 53 19
  • Sanyo PLC-XU25 | Owners Manual - Page 3
    EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE OWNER'S MANUAL WITH
  • Sanyo PLC-XU25 | Owners Manual - Page 4
    , be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or injury to persons. Upon completion of any service or repairs to this projector, ask the
  • Sanyo PLC-XU25 | Owners Manual - Page 5
    Safety Instructions Installing the Projector in Proper Position Install the projector properly. Improper installation may reduce the lamp lifetime and cause a fire hazard. 20˚ Do not tilt the projector more than 20 degrees above and below. Do not put the projector on either side to project an
  • Sanyo PLC-XU25 | Owners Manual - Page 6
    Model Numbers Trade Name Responsible party Address Telephone No. : PLC-XU25 : Sanyo : SANYO FISHER COMPANY : 21605 Plummer Street, Chatsworth, California 91311 : (818)998-7322 AC POWER CORD REQUIREMENT The AC Power Cord supplied with this projector meets the requirement for use in the country you
  • Sanyo PLC-XU25 | Owners Manual - Page 7
    plug into any other type of power system. Consult your authorized dealer or service station if you are not sure of the type of power being supplied. Connect the projector with all peripheral equipment before turning the projector on. (See page 17-18 for connection.) Compliance CAUTION For safety
  • Sanyo PLC-XU25 | Owners Manual - Page 8
    both the projector and the connected computer with the remote control. (See page 14.) N Multi Card Imager (optional) The projector can you purchased the projector for the Multi Card Imager. N Power Management The Power management function reduces power consumption and maintain the lamp life. (See
  • Sanyo PLC-XU25 | Owners Manual - Page 9
    Part Names and Functions Front q Power Cord Connector w Infrared Remote Receiver e Projection Lens r Lens Cover (See page 54 for attaching.) t Air Intake Vent t Air Intake Vent y Terminals and Connectors u Speaker q Lamp Cover w Air Intake Vent (back and bottom) e Air Filter r Adjustable Feet r 9
  • Sanyo PLC-XU25 | Owners Manual - Page 10
    Part Names and Functions Terminal q w e r t y COMPUTER IN 1 DVI - I AUDIO IN R L (MONO) VIDEO USB * SERVICE terminal. (p17) w SERVICE PORT This jack is used to service this projector. e AUDIO IN When operating the connected computer with the remote control, connect USB port of your
  • Sanyo PLC-XU25 | Owners Manual - Page 11
    p21) t POWER indicator Flashes red until the projector gets ready to be turned on. It turns red when the projector is in the stand-by mode. It remains green while the projector is under operation. o LAMP REPLACE indicator Turns yellow when the life of the projection lamp draws to an end. (p43) 11
  • Sanyo PLC-XU25 | Owners Manual - Page 12
    Part Names and Functions Remote Control q w e r !4 t !5 y !6 u !7 i o !0 !8 !1 !9 !2 @0 !3 @1 12 q L-CLICK emitted from the laser light window or a signal is being sent from the remote control to the projector. e AUTO PC button Operates the Auto PC adjustment function. (p26) r
  • Sanyo PLC-XU25 | Owners Manual - Page 13
    damage may result. Signal Emission Indicator These caution labels are put on the remote control. Laser Light Window Pointer Function You can move Spotlight or Pointer of the projector with the remote control to emphasize a part of the projected image. (See "Pointer" on page 40 for changing the
  • Sanyo PLC-XU25 | Owners Manual - Page 14
    Part Names and Functions Remote Control Code This projector has eight different remote control codes (Code 1-Code 8); the factory-set, initial code (Code 1) and the other seven codes (Code 2 to Code 8). This switching function prevents remote control interference when operating several projectors
  • Sanyo PLC-XU25 | Owners Manual - Page 15
    is about 16.4' (5m) and 60° in front of the projector. 16.4' (5 m) 60° Remote Control Batteries Installation 1 Remove the battery compartment lid. Press the lid downward and slide it. 2 Slide the batteries into the compartment. 3 Replace the compartment lid. Two AA size batteries For correct
  • Sanyo PLC-XU25 | Owners Manual - Page 16
    undo the feet lock latches. Keystone distortion of the projected image can be adjusted by menu operation. (p20, 38) CAUTION Tilt the projector within the adjustable range in order not to shorten the life of the lamp. Proper angle should be taken. See page 5. 16 Adjustable Feet Feet Lock Latches
  • Sanyo PLC-XU25 | Owners Manual - Page 17
    IBM-compatible computer or Macintosh computer (VGA / SVGA / XGA / SXGA) Desktop type Laptop type Monitor Output Monitor Output SERVICE PORT S-VIDEO COMPUTER / COMPONENT RESET MCI COMPUTER IN 2 / COMPONENT IN / MONITOR OUT AUDIO IN AUDIO OUT (VARIABLE) AUDIO OUT Terminals of the Projector
  • Sanyo PLC-XU25 | Owners Manual - Page 18
    AUDIO IN VIDEO COMPUTER IN 1 DVI - I AUDIO IN R L (MONO) VIDEO USB SERVICE PORT S-VIDEO COMPUTER / COMPONENT RESET MCI COMPUTER IN 2 / COMPONENT IN / MONITOR OUT AUDIO IN AUDIO OUT (VARIABLE) AUDIO IN Terminals of the Projector NOTE G The S-VIDEO jack has priority over the VIDEO jack under
  • Sanyo PLC-XU25 | Owners Manual - Page 19
    Selected Input Source Turning Off the Projector 1 Press the POWER ON-OFF button on the top control or on the remote control, and a message "Power off Then you can disconnect the AC power cord. TO MAINTAIN THE LIFE OF LAMP, ONCE YOU TURN PROJECTOR ON, WAIT AT LEAST 5 MINUTES BEFORE TURNING IT OFF.
  • Sanyo PLC-XU25 | Owners Manual - Page 20
    Up button. Reduce the lower width with Point Down button. Reduce the left part with Point Left button. Reduce the right part with Point Right button. Picture Freeze Function Press the FREEZE button on the remote control to freeze the picture on the screen. To cancel the FREEZE function, press
  • Sanyo PLC-XU25 | Owners Manual - Page 21
    the screen for a few seconds. (+) button to turn up the volume and (-) button to turn down the volume. Mute Press the MUTE button on the remote control to cut off sound. To restore sound to its previous level, press the MUTE button again or press the VOLUME (+/-) button. indicates approximate level
  • Sanyo PLC-XU25 | Owners Manual - Page 22
    adjust this projector through the On-Screen Menu. Refer to the following pages to operate each adjustment on the On-Screen Menu. Remote Control POINT or on the remote control. SELECT button MENU button Top Control ON - OFF INPUT POWER WARNING KEYSTONE SELECT LAMP REPLACE VOLUME - VOLUME
  • Sanyo PLC-XU25 | Owners Manual - Page 23
    Basic Operation Menu Bar For computer source Guide Window Shows the selected Menu of the OnScreen True / Wide / Digital zoom +/-] (p31) Setting Menu Used to change settings of the projector or reset lamp replace counter. (p38-40) Input Menu Used to select input source either Computer or Video. (
  • Sanyo PLC-XU25 | Owners Manual - Page 24
    pressing the INPUT button on the top control or press the COMPUTER button on the remote control. Before using these buttons, correct input source should be selected through menu , LLC. Should the specification be changed, this projector may not display the digital content protected by HDCP. 24
  • Sanyo PLC-XU25 | Owners Manual - Page 25
    icon. When the image is not provided properly, manual adjustment is required. (p27, 28) - - - - There is no signal input from the connected computer. Check the connection of the computer and see if the projector is set correctly. (See "Troubleshooting" on page 45.) Mode 1 User preset adjustment
  • Sanyo PLC-XU25 | Owners Manual - Page 26
    Adjust can also be executed by pressing the AUTO PC button on the remote control. PC Adjust Menu Auto PC Adj. Automatically adjusts Fine sync, Total data Adjustment parameters from Auto PC Adjustment can be memorized in this projector. Once parameters are memorized, the setting can be done just by
  • Sanyo PLC-XU25 | Owners Manual - Page 27
    PC Adjustment to enable you to precisely adjust several parameters to match those signal formats. The projector has 5 independent memory areas to memorize those parameters manually adjusted. This enables you to recall the setting for a specific computer whenever you use it. 1 Press the MENU button
  • Sanyo PLC-XU25 | Owners Manual - Page 28
    button at the Display area icon and the Display area dialog box appears. Display area Display area V Adjusts the vertical area displayed by this projector. Press the Point Left/Right button to decrease/increase value and then press the SELECT button. Full screen When this function is on, SXGA
  • Sanyo PLC-XU25 | Owners Manual - Page 29
    an image level among Standard, Real, Image 1, Image 2, Image 3, and Image 4 by pressing the IMAGE button on the remote control. Standard Normal picture level preset on this projector. Real Picture level with improved halftone for graphics. IMAGE 1~4 User preset image in the Image Adjust Menu (p30
  • Sanyo PLC-XU25 | Owners Manual - Page 30
    button to obtain better balance of contrast. (From 0 to 15.) Reset Resets all adjustment to their previous levels. Store To store the image data adjusted manually, move the red frame pointer to the Store icon and press the SELECT button. The Image Level Menu will appear. Move the red frame pointer
  • Sanyo PLC-XU25 | Owners Manual - Page 31
    A projected image can be also expanded by pressing the D.ZOOM L button on the remote control. NOTE G This Screen Menu cannot be operated when "720p (HDTV)", "1035i the resolution to the lower before connecting to the projector. G The image data in other than XGA (1024 x 768) is modified to fit the
  • Sanyo PLC-XU25 | Owners Manual - Page 32
    INPUT button on the top control or the VIDEO button on the remote control. Before using these buttons, correct input source should be selecting Auto, the projector automatically detects incoming video signal, and adjusts itself to optimize its performance. The projector selects connection in the
  • Sanyo PLC-XU25 | Owners Manual - Page 33
    21-Pin) Direct Operation Choose Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control. Before using these buttons, correct input source should be selected through menu operation as described below. INPUT button Computer 1 Computer 2 ✽ Video
  • Sanyo PLC-XU25 | Owners Manual - Page 34
    video system, and adjusts itself to optimize its performance. When Video System is PAL-M or PAL-N, select system manually. PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N If the projector cannot reproduce proper video image, it is necessary to select a specific broadcast signal format among PAL, SECAM
  • Sanyo PLC-XU25 | Owners Manual - Page 35
    an image level among Standard, Cinema, Image 1, Image 2, Image 3, and Image 4 by pressing the IMAGE button on the remote control. Standard Normal picture level preset on this projector. Cinema Picture level adjusted for the picture with fine tone. IMAGE 1~4 User preset image in the Image Adjust Menu
  • Sanyo PLC-XU25 | Owners Manual - Page 36
    Video Input Image Level Adjustment 1 Press the MENU button and the On-Screen Menu will appear. Press the Point Left/Right button to move the red frame pointer to the Image Adjust Menu icon. 2 Press the Point Down button to move the red frame pointer to the item that you want to adjust and then
  • Sanyo PLC-XU25 | Owners Manual - Page 37
    Menu Move the red frame pointer to an image icon to be set and then press the SELECT button. Store icon Screen Size Adjustment This projector has a picture screen resize function, which enables you to display the desirable image size. 1 Press the MENU button and the On-Screen Menu will appear
  • Sanyo PLC-XU25 | Owners Manual - Page 38
    as "User". Then the captured image will be displayed when turning on the projector next time or pressing the NO SHOW button. (p21) To capture the image (See page 29, 35.) A signal from a computer can be captured up to XGA(1024 x 768). A signal from video equipment can be captured except for 720p,
  • Sanyo PLC-XU25 | Owners Manual - Page 39
    reversed. This function is used to project the image from a ceiling mounting the projector. Rear When this function is "On," the picture is left/right lamp will be turned on if the input signal is reconnected or any button on the top control or remote control is pressed. Shutdown···· When the lamp
  • Sanyo PLC-XU25 | Owners Manual - Page 40
    part operation.) Remote control This projector provides eight different remote control Lamp counter reset This function is used to reset the lamp replace counter. When replacing the projection lamp, reset the lamp replace counter by using this function. See page 44 for operation. Pointer Remote
  • Sanyo PLC-XU25 | Owners Manual - Page 41
    off and the WARNING indicator lights red, disconnect the AC power cord and contact the service station for check and repair. TOP CONTROL WARNING LECT LAMP REPLACE VOLUME + CAUTION DO NOT LEAVE THE PROJECTOR WITH THE AC POWER CORD CONNECTED UNDER THE ABNORMAL CONDITION. IT MAY RESULT IN FIRE
  • Sanyo PLC-XU25 | Owners Manual - Page 42
    , dry them well. Replace the air filters properly. Make sure that the air filters are fully inserted. CAUTION Do not operate the projector with the air filters removed. Dust may accumulate on the LCD panel and the projection mirror degrading picture quality. Do not put small parts into the air
  • Sanyo PLC-XU25 | Owners Manual - Page 43
    Screw Screw Screw Handle ORDER REPLACEMENT LAMP Replacement lamp can be ordered through your dealer. When ordering a projection lamp, give the following information to the dealer. G Model No. of your projector : G Replacement Lamp Type No. : PLC-XU25 POA-LMP55 (Service Parts No. 610 309 2706
  • Sanyo PLC-XU25 | Owners Manual - Page 44
    should be replaced, i.e., if the LAMP REPLACE indicator lights up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down. ( Follow carefully the instructions in the Lamp Replacement section of this manual. ) Continuous use of the lamp with the LAMP REPLACE indicator lighted
  • Sanyo PLC-XU25 | Owners Manual - Page 45
    Troubleshooting Before calling your dealer or service center for assistance, check the items below once again. - Make sure you have properly connected the projector See your computer's owner's manual for setting. - It takes about 30 seconds to display an image after turning on the projector. - See if
  • Sanyo PLC-XU25 | Owners Manual - Page 46
    computer. WARNING : High voltages are used to operate this projector. Do not attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Give the model number and explain about the
  • Sanyo PLC-XU25 | Owners Manual - Page 47
    the service center for service and checkup. Do not leave the pro- jector on. It may cause electric shock or a fire hazard. • • • lights green. • • • flashes green. • • • lights red. • • • flashes red. • • • off ✽ When the life of the projection lamp draws to an end, the LAMP REPLACE indicator
  • Sanyo PLC-XU25 | Owners Manual - Page 48
    Appendix Menu Tree Computer Input / Video Input Input Computer 1 Computer 2 Video Computer Input System (1) MODE 1 MODE 2 SVGA 1 - - - - ✽Systems displayed in the System Menu vary depending on an input signal. PC Adjust Auto PC Adj. Fine sync. Total dots Horizontal Vertical Current mode
  • Sanyo PLC-XU25 | Owners Manual - Page 49
    Quit Volume Mute Quit Language Keystone Blue back Display Logo Capture Ceiling Rear Terminal Standby mode Power management On start 0 - 63 Remote control Key lock Lamp counter reset Factory default Spotlight Pointer Code 1 Code 2 Code 3 Code 4 Code 5 Code 6 Code 7 Code 8 Quit Off Projector Remote
  • Sanyo PLC-XU25 | Owners Manual - Page 50
    Compatible Computer Specifications Basically this projector can accept the signal 16 832 x 624 XGA 1 1024 x 768 XGA 2 1024 x 768 XGA 3 1024 x 768 XGA 4 1024 x 768 XGA 5 1024 x 768 XGA 6 1024 x 768 XGA 7 1024 x 768 XGA 8 1024 x 768 XGA 9 1024 x 768 XGA 10 1024 x 768 XGA 11 1024 x 768
  • Sanyo PLC-XU25 | Owners Manual - Page 51
    Projector Type Dimensions (W x H x D) Net Weight LCD Panel System Panel Resolution Number of Pixels Color System High Definition TV Signal Scanning Frequency Projection Image size (Diagonal) Projection Lens Throw Distance Projection Lamp 640~660nm) Owner's Manual AC Power Cord Remote Control and
  • Sanyo PLC-XU25 | Owners Manual - Page 52
    Appendix Configurations of Terminals COMPUTER INPUT/COMPONENT INPUT/MONITOR OUTPUT TERMINAL (ANALOG) Terminal : HDB15-PIN Pin Configuration 54 32 1 10 9 8 7 6 15 14 13 12 11 1 Red Input 2 Green Input 3 Blue Input 4 Sense 2 5 Ground (Horiz.sync.) 6 Ground (Red) 7 Ground (Green) 8 Ground (Blue) 9
  • Sanyo PLC-XU25 | Owners Manual - Page 53
    Appendix SERVICE PORT CONNECTOR Terminal : Mini DIN 8-PIN Pin Configuration 876 5 43 21 PS/2 Serial ADB 1 ----- R X D ----- 2 CLK 2 - Data 3 + Data 4 Ground Optional Parts The parts listed below are optionally supplied. When ordering those parts, give the name and Type No. to the sales
  • Sanyo PLC-XU25 | Owners Manual - Page 54
    Appendix Attaching the Lens Cover When moving this projector or when it is not used for an extended period, replace the lens cover. 1 Secure the string for the lens cover through a hole of the lens cover. 2 Turn the projector upside down and secure the string for lens cover to a hole on the bottom
  • Sanyo PLC-XU25 | Owners Manual - Page 55
  • Sanyo PLC-XU25 | Owners Manual - Page 56
    Printed in Japan Part No. 610 308 9003 (1AA6P1P4173-- MY3A) SANYO Electric Co., Ltd.
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
Multimedia Projector
MODEL
PLC-XU25
Owner’s Manual