Sanyo PLC-XU305A Owner's Manual

Sanyo PLC-XU305A - 3000 Manual

Get Sanyo PLC-XU305A - 3000 PDF manuals and user guides
UPC - 086483076312
View all Sanyo PLC-XU305A manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo PLC-XU305A manual content summary:

  • Sanyo PLC-XU305A | Owner's Manual - Page 1
    Multimedia Projector MODEL PLC-XU305A PLC-XU355A Network Supported □ Wireless LAN IEEE802.11b/g □ Wired LAN 100-Base-TX/10-Base-T Memory Viewer □ USB Memory Viewer * Refer to the owner's manuals below for details about network and memory viewer function. ■ Network Set-up and Operation ■
  • Sanyo PLC-XU305A | Owner's Manual - Page 2
    to carry computers or other equipment for Brightness of the projection lamp can be selected a presentation. (pp.27, 55). *USB memory is not supplied with the projector. For ♦ Quick Termination details, refer to the owner's manual of "Memory The AC power cord can be unplugged immediately
  • Sanyo PLC-XU305A | Owner's Manual - Page 3
    Attaching the Lens Cap 63 Cleaning the Projection Lens 63 Cleaning the Projector Cabinet 63 Lamp Replacement 64 Troubleshooting 66 Menu Tree 70 Appendix 72 Indicators and Projector Condition 72 Compatible Computer Specifications 73 Technical Specifications 75 Optional Parts 76
  • Sanyo PLC-XU305A | Owner's Manual - Page 4
    problem still persists, contact the dealer where you purchased the projector or the service center. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING
  • Sanyo PLC-XU305A | Owner's Manual - Page 5
    Follow all warnings and instructions marked on the projector. For added protection to the projector during a lightning storm projector exhibits a distinct change in performance-this indicates a need for service. When replacement parts are required, be sure the service technician has used replacement
  • Sanyo PLC-XU305A | Owner's Manual - Page 6
    it is not designed to protect an appliance from external forces. Do not transport the projector by courier or any other transport service with this case, otherwise the projector can be damaged. When handling the projector, do not drop, bump, subject it to strong forces, or put other things on the
  • Sanyo PLC-XU305A | Owner's Manual - Page 7
    equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Model Number PLC-XU305A, PLC-XU355A Trade Name Sanyo Responsible party : SANYO NORTH AMERICA CORPORATION Address 21605
  • Sanyo PLC-XU305A | Owner's Manual - Page 8
    Infrared Remote Receiver ② Zoom Ring ③ Focus Ring ④ Projection Lens ⑤ Lens Cap (See page 63 for attaching.) CAUTION Do not turn on a projector with Connector (Series A) are for the Network function. Refer to the owner's manual "Network Set-up and Operation" .  Kensington Security Slot This slot
  • Sanyo PLC-XU305A | Owner's Manual - Page 9
    ⑥ ① CONTROL PORT When the projector is controlled by a computer, connect manual "Network Set-up and Operation"). ⑥ USB Connector (Series A) Connect the USB cable (refer to the owner's manual the computer with the remote control and use the PAGE ▲▼buttons on the remote control during a presentation
  • Sanyo PLC-XU305A | Owner's Manual - Page 10
    detects an abnormal condition. -Blinks red when the internal temperature of the projector exceeds the operating range (pp.61, 72). ⑨ LAMP REPLACE indicator Lights yellow when the projection lamp reaches its end of life (pp.64, 72). ⑩ WIRELESS indicator Turn green when the wireless communication
  • Sanyo PLC-XU305A | Owner's Manual - Page 11
    a signal is being sent from the remote control to the projector. ④ LASER LIGHT window A laser these buttons, connect the projector and your computer with a USB cable. (pp.9, 16) ⑭ LAMP button Select a lamp mode. (pp.27, manual of "Memory viewer". ㉖ NETwORK button Select the Network input. See owner
  • Sanyo PLC-XU305A | Owner's Manual - Page 12
    to activate the Pointer function. (The Laser pointer has switched to the Pointer function.)  Press the LASER button on the remote control pointing toward the projector. The Spotlight or Pointer is displayed on the screen with the LASER button lighting green. Then move the Spotlight or Pointer with
  • Sanyo PLC-XU305A | Owner's Manual - Page 13
    or video equipment next to each other are operated at the same time. Change the remote control code for the projector first before changing that for the remote control. See "Remote control" in the Setting Menu on page 55. 1 While pressing the MENU button, press the IMAGE button number of times
  • Sanyo PLC-XU305A | Owner's Manual - Page 14
    an explosion if battery is replaced by an incorrect type. ● Dispose of used batteries according to the instructions or your local disposal rule or guidelines. Remote Control Operating Range Point the remote control toward the projector (Infrared Remote Receiver) when pressing the buttons. Maximum
  • Sanyo PLC-XU305A | Owner's Manual - Page 15
    Installation Positioning the Projector For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the screen. Note: • The brightness in the room has a great influence on picture quality. It is recommended
  • Sanyo PLC-XU305A | Owner's Manual - Page 16
    IN 1/ COMPONENT IN terminal as input. • When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available. • USB cable connection is needed when operating the computer with the remote control or using the PAGE ▲▼ buttons on the remote control. 16 Unplug the power cords of both the
  • Sanyo PLC-XU305A | Owner's Manual - Page 17
    cable Audio cable (stereo) S-Video cable AUDIO IN VIDEO AUDIO OUT (stereo) S-VIDEO Note: • When the AUDIO OUT is plugged-in, the projector's builtin speaker is not available. • The S-VIDEO jack connection overrides the VIDEO jack connection when selecting Auto in the Input Menu (p.41
  • Sanyo PLC-XU305A | Owner's Manual - Page 18
    used for connection • Audio Cables • Scart-VGA Cable • VGA Cable • Component Cable • Component-VGA Cable (Cables are not supplied with this projector.) RGB Scart 21pin Output Component Video Output (Y, Pb/Cb, Pr/Cr) Monitor Input Audio Output Component cable Scart-VGA cable ComponentVGA
  • Sanyo PLC-XU305A | Owner's Manual - Page 19
    system. If you are not sure of the type of power being supplied, consult your authorized dealer or service station. Connect the projector with all peripheral equipment before turning the projector on. CAUTION The AC outlet must be near this equipment and must be easily accessible. Note: Unplug
  • Sanyo PLC-XU305A | Owner's Manual - Page 20
    . Enter the PIN code as instructed on the next page. 16 The preparation display will disappear after 30 seconds. Selected Input Source and Lamp Control Video Lamp control status (See page 55 for Lamp control status.) Note: The Filter warning and Lamp replacement icons may appear on the screen
  • Sanyo PLC-XU305A | Owner's Manual - Page 21
    start to operate the projector. If you entered an projector. Setting a PIN code prevents unauthorized use of the projector projector with your PIN code. PIN Code Input Dialog Box After the OK icon disappears, you can operate the projector your PIN code, the projector can no longer be started.
  • Sanyo PLC-XU305A | Owner's Manual - Page 22
    on the remote control, and Power off? appears on the screen. 2 Press the ON/STAND-BY button again to turn off the projector. The OFF. DO NOT OPERATE THE PROJECTOR CONTINUOUSLY WITHOUT REST. CONTINUOUS USE MAY RESULT IN SHORTENING THE LAMP LIFE. TURN OFF THE PROJECTOR AND LET STAND FOR ABOUT AN
  • Sanyo PLC-XU305A | Owner's Manual - Page 23
    , which are further divided into other submenus. For each adjustment and setting procedure, refer to respective sections in this manual. 1 Press the MENU button on the top control or the remote control to display the On-Screen Menu.  Use the Point ▲▼ buttons to highlight or select a main menu item
  • Sanyo PLC-XU305A | Owner's Manual - Page 24
    set the projector's operating configurations (pp.46-59).  Information Display the input source information: Input , H-sync freq., V-sync freq., Screen, Language, Lamp status, Lamp counter, Power management, Key lock, PIN code lock and Remote control (p.60).  Network See owner's manual "Network Set
  • Sanyo PLC-XU305A | Owner's Manual - Page 25
    . If the distortion cannot be corrected properly by pressing the AUTO SETUP/CANCEL or AUTO SET/CANCEL button, adjust manually by pressing the KEYSTONE button on the remote control or selecting Keystone in the Setting menu (p.48). • Fine sync, Total dots, Horizontal and Vertical position of some
  • Sanyo PLC-XU305A | Owner's Manual - Page 26
    MUTE button again to select Off or press the VOLUME +/- buttons. The Mute function is also effective for the AUDIO OUT jack. Top Control Remote Control VOLUME+/buttons VOLUME- button VOLUME+ button Menu Operation 1 Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to
  • Sanyo PLC-XU305A | Owner's Manual - Page 27
    enter to the Digital zoom +/- mode. See page 38 for details. LAMP button Note: See the next page for the description of other buttons. LAMP button Press the LAMP button on the remote control to select the lamp mode for changing the brightness on the screen. Normal....... Normal brightness. Eco
  • Sanyo PLC-XU305A | Owner's Manual - Page 28
    Basic Operation NO SHOw button Press the NO SHOW button on the remote control to black out the image. To restore to normal, press the NO SHOW button again or press any other button. When a projected image is captured and set as User in the Logo selection (see page 49), the screen changes
  • Sanyo PLC-XU305A | Owner's Manual - Page 29
    should be selected through Menu operation as described below. Remote Control COMPUTER button Computer 1 Top Control INPUT button PC digital) Wired 1 Note: • Network is for the Network function. See owner's manual "Network Set-up and Operation". • When the Input Search function is set to On1
  • Sanyo PLC-XU305A | Owner's Manual - Page 30
    should be selected through Menu operation as described below. Remote Control COMPUTER button Top Control INPUT button Computer 1 Computer be changed, this projector may not display the digital content protected by HDCP. • Network is for the Network function. See owner's manual "Network Set-up
  • Sanyo PLC-XU305A | Owner's Manual - Page 31
    required (pp.33-34). There is no signal input from the computer. Check the connection between your computer and the projector. (See "Troubleshooting" on page 66.) The preset system is manually adjusted in the PC adjust Menu. The adjusted data can be stored in Mode 1-5 (pp.33-34). PC Systems provided
  • Sanyo PLC-XU305A | Owner's Manual - Page 32
    adjusted parameters from the Auto PC Adjustment can be stored in the projector. Once the parameters are stored, the setting can be done just by Adjustment function. When the image is not provided properly with this operation, manual adjustments are required (pp.33-34). • The Auto PC Adjustment
  • Sanyo PLC-XU305A | Owner's Manual - Page 33
    PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has five independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific computer. 1 Press the MENU button to display the On-Screen
  • Sanyo PLC-XU305A | Owner's Manual - Page 34
    Computer Input Reset To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select Yes. All adjustments will return to their previous figures. Mode free Mode free To clear the stored data, select Mode free and then press the Point ► or the
  • Sanyo PLC-XU305A | Owner's Manual - Page 35
    by pressing the IMAGE button on the remote control. Remote Control IMAGE button Menu Operation 1 Press Standard Normal picture mode preset on the projector. Real Picture mode with improved halftone for four colors. Image 1- For viewing with the user preset image mode in the Image Adjust Menu
  • Sanyo PLC-XU305A | Owner's Manual - Page 36
    mode Use the Point ◄► buttons to adjust the setting value. Note: • When White balance Red, Green or Blue is adjusted, Color temp. will change to User. • When Blackboard(Green) or Colorboard is selected in Image select, Color temp. will change to Blackboard or Colorboard. 36
  • Sanyo PLC-XU305A | Owner's Manual - Page 37
    the screen size. True Provide the image in its original size. When the original image size is larger than the screen size (1024 x 768), the projector enters to the panning mode automatically. Use the Point buttons to pan the image. When adjusted, the arrows will turn red. When reached to the
  • Sanyo PLC-XU305A | Owner's Manual - Page 38
    Input Custom Adjust the screen scale and position manually with this function. Press the SELECT button at image size. The projected image can be also compressed by pressing the D.ZOOM ▼ button on the remote control. To exit the Digital zoom +/- mode, press any button except the D.ZOOM ▲▼ buttons,
  • Sanyo PLC-XU305A | Owner's Manual - Page 39
    button on the top control or the VIDEO button on the remote control. Before using these buttons, correct input source should be PC digital) Wired 1 Note: • Network is for the Network function. See the owner's manual "Network Set-up and Operation" . • When the Input Search function is set to On1
  • Sanyo PLC-XU305A | Owner's Manual - Page 40
    should be selected through Menu operation as described below. Remote Control Top Control INPUT button COMPUTER button Computer 1 digital) Wired 1 Note: • Network is for the Network function. See owner's manual "Network Set-up and Operation" . • When the Input Search function is set to
  • Sanyo PLC-XU305A | Owner's Manual - Page 41
    system, and adjusts itself to optimize its performance. When Video System is PAL-M or PAL-N, select the system manually. PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC 4.43, PAL
  • Sanyo PLC-XU305A | Owner's Manual - Page 42
    button . Remote Control IMAGE button Dynamic For viewing pictures in a bright room. Standard Normal picture mode preset on the projector. Cinema Picture the wall color from the preset four colors. Image 1- For viewing with the user preset image mode in the Image Adjust Menu (see pages 43-44). This
  • Sanyo PLC-XU305A | Owner's Manual - Page 43
    the Point ◄► buttons to adjust the setting value. Note: • When White balance Red, Green or Blue is adjusted, the Color temp. level will change to User. • Tint cannot be selected when the video system is PAL, SECAM, PAL-M or PAL-N (p.41). • When Blackboard(Green) or Colorboard is selected in Image
  • Sanyo PLC-XU305A | Owner's Manual - Page 44
    . Off.......... Disabled. L1........... For an active picture. L2........... For a still picture. Film........ For watching a film. With this function, the projector reproduces pictures faithful to the original film quality. Reset To reset the adjusted data, select Reset and press Point ► button
  • Sanyo PLC-XU305A | Owner's Manual - Page 45
    Video Input Screen Size Adjustment This projector has the picture screen resize function, which Provide the image at the 16:9 wide screen ratio. Custom Adjust the screen scale and position manually with this function. Press the SELECT button at Custom and Custom is displayed on the screen for
  • Sanyo PLC-XU305A | Owner's Manual - Page 46
    Setting Setting This projector has a Setting menu that allows you to set up the other various functions described below. 1 Press the MENU button to display the On-Screen Menu.
  • Sanyo PLC-XU305A | Owner's Manual - Page 47
    the AUTO SET/CANCEL button on the remote control or the AUTO SETUP/CANCEL button on the top control. Off Disables Auto PC Adjustment. Auto Keystone Auto Always works and corrects keystone distortion according to the projector's tilt. Manual . . Works only when pressing the AUTO SETUP
  • Sanyo PLC-XU305A | Owner's Manual - Page 48
    When the Logo setting (see page 49) is set to Off with the User background, the Background setting will be switched to Blue. Display This function decides when turning on the projector. Use this function when you want to project the image as early as possible even when the lamp is not bright enough.
  • Sanyo PLC-XU305A | Owner's Manual - Page 49
    select This function decides on the starting-up display from among following options. Off Show the countdown display only Default..... Show the factory-set logo User......... Show the image you captured Setting 49
  • Sanyo PLC-XU305A | Owner's Manual - Page 50
    select function and set it to User. Then the captured image will be displayed the next time you turn on the projector or when you press the NO image (pp.35, 42). • A signal from a computer can be captured up to XGA (1024 x 768). A signal from video equipment can be captured except for 720p, 1035i
  • Sanyo PLC-XU305A | Owner's Manual - Page 51
    -digit number. After entering the four-digit number, move the pointer to Set. Press the SELECT button so that you can start to operate the projector. If you entered an incorrect Logo PIN code, Logo PIN code and the number will turn red for a moment. Enter the correct Logo PIN code
  • Sanyo PLC-XU305A | Owner's Manual - Page 52
    is set to On, the picture will be top/ bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector. Rear When this function is set to On, the picture will be left/right reversed. This function is used to project the image from rear
  • Sanyo PLC-XU305A | Owner's Manual - Page 53
    lamp life, the Power management function turns off the projection lamp when the projector is not operated for a certain period. Select one of the following options: Ready When the lamp on the top control or remote control is pressed. Shut down........... When the lamp has been fully cooled down,
  • Sanyo PLC-XU305A | Owner's Manual - Page 54
    is powered off. Eco Select Eco when you do not use the projector via network. The projector's network function will stop when turning off the projector. Refer to the owner's manual "Network Set-up and Operation". Note: • Factory default is Network. • When selecting Network, the cooling fans
  • Sanyo PLC-XU305A | Owner's Manual - Page 55
    on. Then the projector will turn off after 3 minutes. Lamp replacement icon Lamp life control • The Lamp replacement icon will not appear when the Display function is set to Off (p.48), during "Freeze" (p.27), or "No show" (p.28). Remote control The eight different remote control codes (Code
  • Sanyo PLC-XU305A | Owner's Manual - Page 56
    becomes locked and you do not have the remote control nearby or there is something wrong with your remote control, contact the dealer where you purchased the projector or the service center. PIN code lock This function prevents the projector from being operated by unauthorized persons and provides
  • Sanyo PLC-XU305A | Owner's Manual - Page 57
    new pin code in column of the pin code no. memo on page 79, and keep it securely. If you forget your PIN code, the projector can no longer be started. 57
  • Sanyo PLC-XU305A | Owner's Manual - Page 58
    turned off (p.22). L1....... Normal operation L2....... Slower and lower-sound than the normal operation (L1), but it takes more time to cool the projector down. Fan control Choose the running speed of cooling fans from the following options according to the ground elevation under which you use the
  • Sanyo PLC-XU305A | Owner's Manual - Page 59
    log This function records anomalous operations while the projector is in operation and use it when diagnosing Factory default This function returns all setting values except for the User logo, PIN code lock, Logo PIN code lock, Lamp counter and Filter counter to the factory default settings. Factory
  • Sanyo PLC-XU305A | Owner's Manual - Page 60
    of the projector. Direct Operation Press the INFO. button on the remote control to display the Information Menu. Remote Control Menu Operation selected language is displayed. Lamp status The selected lamp mode is displayed. Lamp counter The cumulative lamp operating time is displayed. Power
  • Sanyo PLC-XU305A | Owner's Manual - Page 61
    cannot be turned on and the WARNING indicator still lights red, unplug the AC power cord and contact the service station. CAUTION DO NOT LEAVE THE PROJECTOR WITH THE AC POWER CORD CONNECTED UNDER AN ABNORMAL CONDITION. IT MAY RESULT IN FIRE OR ELECTRIC SHOCK. Top Control WARNING emit a red
  • Sanyo PLC-XU305A | Owner's Manual - Page 62
    dusty or smoky conditions, dust may accumulate on a lens, LCD panels, or optical elements inside the projector degrading the quality of a projected image. When the symptoms above are noticed, contact your authorized dealer or service station for proper cleaning. Resetting the Filter Counter Be sure
  • Sanyo PLC-XU305A | Owner's Manual - Page 63
    Attaching the Lens Cap When moving the projector or while it is not in use, replace the lens cap. 1 Thread the string through the hole on the lens cap and then tie a knot in the string to secure it in place. 2
  • Sanyo PLC-XU305A | Owner's Manual - Page 64
    Maintenance and Cleaning Lamp Replacement When the projection lamp of the projector reaches its end of life, the Lamp replacement icon appears on the screen and LAMP REPLACE indicator lights yellow. Replace the lamp with a new one promptly. The timing when the LAMP REPLACE indicator should light is
  • Sanyo PLC-XU305A | Owner's Manual - Page 65
    and Cleaning ORDER REPLACEMENT LAMP Replacement lamp can be ordered through your dealer. When ordering a projection lamp, give the following information to the dealer. ● Model No. of your projector ● Replacement Lamp Type No. : PLC-XU305A, PLC-XU355A : POA-LMP131 (Service Parts No. 610
  • Sanyo PLC-XU305A | Owner's Manual - Page 66
    Appendix Troubleshooting Before calling your dealer or service center for assistance, check the items below once again. -Make sure you have properly connected the projector to peripheral equipment as described on pages 16-18. -Make sure all equipment is connected to AC outlet and the power is
  • Sanyo PLC-XU305A | Owner's Manual - Page 67
    setting for monitor output when connecting to a projector. See your computer's instruction manual for the setting. - It takes about 30 be displayed. Press the NO SHOW button or any other button on the remote control. No sound - Check the audio cable connection from audio input source
  • Sanyo PLC-XU305A | Owner's Manual - Page 68
    between the projector and your computer. - Check the mouse setting on you computer. - Make sure the mouse driver is installed on your computer, otherwise, the remote control can not where you purchased the projector or the service lock, Security key lock or Security center. PIN code lock. 68
  • Sanyo PLC-XU305A | Owner's Manual - Page 69
    attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Specify the model number and explain about the problem. We will advise you how to obtain service. The CE Mark is a Directive
  • Sanyo PLC-XU305A | Owner's Manual - Page 70
    /Blue/Yellow/Green Contrast Brightness Color temp. 0-63 0-63 XLow Low Red Green Blue Sharpness Gamma Reset Store Normal True Wide Full Custom Mid High User 0-63 0-63 0-63 0-15 0-15 Yes/No Image 1 Image 2 Image 3 Image 4 Scale H&V Position Common Reset H/V On/Off H/V Yes/No Yes/No Digital zoom
  • Sanyo PLC-XU305A | Owner's Manual - Page 71
    On/Off Auto Keystone Auto Manual Off Store/Reset Blue/User/Black On/Countdown off/Off Logo select Off Default User Capture Yes/No Logo PIN code White Lamp control Normal Remote control Security Fan Fan control Eco Lamp life control Mode 1/Mode 2 Code 1-Code 8 Key lock Off Projector Remote
  • Sanyo PLC-XU305A | Owner's Manual - Page 72
    or the service center for service and checkup. Do not leave the projector on. It may cause an electric shock or a fire hazard. • • • green • • • red • • • off • • • blinks green • • • blinks red When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow
  • Sanyo PLC-XU305A | Owner's Manual - Page 73
    Computer Specifications Basically this projector can accept the signal from 6 SVGA 7 SVGA 8 SVGA 9 SVGA 10 SVGA 11 MAC 16 MAC 19 XGA 1 XGA 2 XGA 3 XGA 4 XGA 5 XGA 6 XGA 7 XGA 8 XGA 9 XGA 10 XGA 11 XGA 12 XGA 13 XGA 14 XGA 15 720p 720p 1035i 1080i 1080i RESOLUTION 640 x 480 720 x 400 640 x
  • Sanyo PLC-XU305A | Owner's Manual - Page 74
    Appendix When the input signal is digital from DVI terminal, refer to the chart below. ON-SCREEN DISPLAY D-VGA D-480p D-575p D-SVGA D-XGA D-WXGA 1 D-WXGA 2 D-WXGA 3 D-WXGA 4 D-WXGA 5 D-WXGA 6 D-WXGA 7 D-WXGA 8 D-WXGA 9 D-WXGA 10 D-WXGA 11 D-WXGA 12 RESOLUTION 640 x 480 640 x 480 768 x 575 800 x
  • Sanyo PLC-XU305A | Owner's Manual - Page 75
    Projector 12.80" x 3.27" x 9.12" (326mm x 83.1mm x 231.6mm) (Not including protrusions) 2.9 kg 0˚ to 12˚ Panel Resolution LCD Lamp Adjustable from 30" to 300" 2.3' - 23.7' (0.69m - 7.23m) F1.65-2.33 lens with f=15.5 mm-24.5 mm with manual ˚F (-10˚C-60 ˚C) Remote Control Battery Operating Range
  • Sanyo PLC-XU305A | Owner's Manual - Page 76
    Accessories Owner's Manual (CD-ROM) Quick Reference Guide and Safety Manual AC Power Cord Remote Control and Batteries LCD panels. Optional Parts The parts listed below are optionally available. When ordering those parts, specify the item name and Model No. to the sales dealer. Model
  • Sanyo PLC-XU305A | Owner's Manual - Page 77
    Information System Industries Association). This projector supports all commands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1. For PJ Link password, see page 49 on the owner's manual "Network Set-up and Operation." Projector Input Computer 2 (Analog) Computer
  • Sanyo PLC-XU305A | Owner's Manual - Page 78
    Appendix Configurations of Terminals COMPUTER IN 1 /COMPONENT IN /MONITOR OUT (ANALOG) Terminal: Analog RGB (Mini D-sub 15 pin) 54 32 1 10 9 8 7 6 15 14 13 12 11 1 Red (R/Cr) Input/Output 2 Green (G/Y) Input/Output 3 Blue (B/Cb) Input/Output 4 ----- 5 Ground (Horiz.sync.) 6 Ground (Red) 7
  • Sanyo PLC-XU305A | Owner's Manual - Page 79
    Code Number Memo Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. PIN Code Lock No. Factory default set No: 1 2 3 4* Logo PIN Code Lock No. Factory default set
  • Sanyo PLC-XU305A | Owner's Manual - Page 80
    Appendix Dimensions 93.5(3.68) 232.5(9.15) 109.7(4.32) 143.3(5.64) 121.9(4.80) Unit: mm(inch) Screw Holes for Ceiling Mount Screw: M4 Depth: 12.0(0.472) 219.4(8.64) 101(3.98) 55(2.17) < < < 12ºMAX 80.5(3.17) 107.6(4.24) 25(0.98) 23(0.91) < 51.9 (2.05) 3.8 (0.15) 24.8 (0.98) 42.3 (1.67)
  • Sanyo PLC-XU305A | Owner's Manual - Page 81
    KG5AE
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
Multimedia Projector
MODEL
PLC-XU305A
PLC-XU355A
Owner’s Manual
Network Supported
□
Wireless LAN
IEEE802.11b/g
□
Wired LAN
100-Base-TX/10-Base-T
Memory Viewer
□
USB Memory Viewer
*
Refer to the owner’s manuals
below for details about network
and memory viewer function.
■
Network Set-up and Operation
■
Memory viewer