Sanyo PLC-XU305A Owner's Manual Network Mac

Sanyo PLC-XU305A - 3000 Manual

Get Sanyo PLC-XU305A - 3000 PDF manuals and user guides
UPC - 086483076312
View all Sanyo PLC-XU305A manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo PLC-XU305A manual content summary:

  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 1
    This is the manual for the Network function. Read this manual thoroughly to operate the Network function. First, read the owner's manual of the projector to understand the basic operation of the projector and the safety instructions. The safety instructions in the owner's manuals should be followed
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 2
    been tested and used in accordance with the instructions, may cause harmful interference Model Number : QXXAVC922---P Trade Name : Sanyo Responsible party : SANYO NORTH must be used for RF interference suppression. For Canadian Users This Class B digital apparatus complies with Canadian ICES-
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 3
    GmbH, declares that this WLAN Module (QXXAVC922---P) is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. SANYO Sales & Marketing Europe GmbH tímto prohlašuje, že tento WLAN Module (QXXAVC922---P) je ve shodě se základními požadavky a dalšími příslu
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 4
    depending on your computer environment. Use of this manual This manual does not provide the description of basic operation and functions for computer, web browser, projector and network. For instructions about each piece of equipment or application software, please refer to the respective booklet. 
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 5
    Table of contents Compliance...2 Safety instructions...4 Table of contents...5 Operating environment and configuration 7 Required operating environment for computers 7 Network specifications of the projector 8 1. About LAN functions 9 LAN functions and the features...10 Image projecting system
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 6
    and status check...64 Controls...66 PC adjustment...70 Setting up the projector...71 Timer setting...74 Projector information...77 Multi-control...79 8. Network capture functions 85 About Network OS X v 10.4...101 Firewall setting for MAC OS X v 10.5...102 Troubleshooting...103 Terminology...107 
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 7
    operating environment for computers When operating the projector via the networks, computers should meet the processor or faster 256MB or more (512MB is recommended) 100MB Required to support any of VGA (640 x 480), SVGA (800 x 600), XGA (1024 x 768), The color number should be either 16 bit (65536
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 8
    Network specifications of the projector LAN Terminal Data communication speed Protocol 100Base-TX (100Mbps)/10Base-T (10Mbps) TCP/IP Wireless LAN Interface Communication Mode Data Transfer Speed Wireless Frequency (Channel) Modulation Form Protocol Security Service area IEEE802.11b/g AdHoc,
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 9
    1 Chapter 1. About LAN functions This chapter describes the features, the mechanism, and connection procedures of the LAN. 
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 10
    to project an image on the computer through a projector via Network with dedicated software. With the software, you can also manipulate the projecting image and the projector. This software has functions below and you can use the projector under various network environments to meet the wide-ranging
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 11
    example of the projection via the LAN. You can project the image on Computer (1) (Wired LAN connection), or Computer (2) (Wireless LAN connection) through the selected projector . 2.0 2.0 1.5 1.5 1.0 1.0 0.5 0.5 0.0 0.0 2.0 1.5 1.0 0.5 0.0 Computer (1) Access point Computer (2) 11
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 12
    communication mode corresponded computer: Infrastructure ■ Wireless LAN, AdHoc Communication Mode Communication mode between Wireless LAN equipment. (Communication mode via SSID/ESSID) Network Projector Wireless communication mode :AdHoc Wireless communication mode corresponded computer: AdHoc 12
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 13
    Computer(2) Computer (3) ✳ Operate the computer mouse with the remote control. When the projector's remote control employs mouse operating function, you can operate the computer by the remote control. To use the remote control, point to the projector. You do not need to connect the USB cable to
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 14
    Chapter 1 About LAN functions 14
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 15
    2 Chapter 2. Setup procedures This chapter describes how to install the Network Capture 5 software and how to set up the networks. 15
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 16
    Chapter 2 Setup procedures To use the projector via the networks, follow the setup procedures below. STEP 1 Install the software on computers. Install the software recorded in CD-ROM on each computer which will be operated. Read following pages of this chapter to install. STEP 2 Select Wired LAN
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 17
    into your computer to use the Network Capture function . Please install the software as follows. Note: To install the software into the computer, logon as an administrator. Before installation, make sure that the other applications are closed, otherwise proper installation cannot be made. Network
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 18
    Chapter 2 Setup procedures 4 Select a Destination, and Click Continue. 5 Click Install to perform a basic installation. 6 Click Close to complete the installation. 18
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 19
    Installed software The following software is installed on your computer. Installing the software ● Network Capture 5: Captures the displayed image of the computer and serves it to the projector via the network. * Move to Trash to uninstall this software. 19
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 20
    Chapter 2 Setup procedures 20
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 21
    3 Chapter 3. Names and functions of the operation screen This chapter describes the functions of each part of the operation screen. 21
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 22
    Chapter 3 Names and functions of the operating screen Network connection standby display Turn on the projector and select either "Wired" or "Wireless" from the input menu of the projector. The "Please wait..." message will be displayed on the screen. After short time, the network connection standby
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 23
    Network Capture 5 window Network Capture 5 window This software is to project the computer screen via the networks. Click a time. e Network Projector List Display all the projectors connected to the networks. Show unoccupied projector as "On standby" and occupied projector as "Real time capturing"
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 24
    multiple network adaptors When your computer provides multiple network adaptors, the network adaptor selecting window will appear each time the Network Capture 5 software starts. Select a network adaptor and check the "Set network adaptor as default" and then click OK. To change the setting, refer
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 25
    4 Chapter 4. Wired LAN configurations This chapter describes the preparation for Wired LAN setting with projectors and how to set the LAN environment. 25
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 26
    to the LAN line Connect the LAN cable to the LAN connection terminal of the projector. LAN Connection Terminal LINK/ACT Lamp (Orange) Light or blink orange when the projector is connected to the network. LAN Cable Speed Lamp (Green) Light according to the speed of the connected network. 10 Base
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 27
    DHCP Sets DHCP function On or Off. When you setup the network setting manually, select "Off". When it is set On, IP address, Subnet, set according to your network environment *1. IP address Sets IP address of the projector Subnet Sets Subnet mask. Normally sets 255.255.255.0 Gateway*2 Sets IP
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 28
    location separated by the router, see next page. When Firewall function (Anti-virus software) is effective, network projector may not be found. In that case, disable the Firewall function and try searching again. ✳ If the projector is named, the name will be displayed. The name can be set with the
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 29
    Add button, "IP address set up" window appears. Enter the IP address of the projector and Click OK button. Then, the projector will be added on the "Search specified IP address" window. Multiple projectors are registered and they are stored even when the application is closed. 3. Click OK button
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 30
    you do not want to set the Network PIN code, set "0000". It is recommended to set the Network PIN code if you use the projector via the networks. The Network PIN code can be set also through the networks. See "6. Basic setting and operation" ➔ "Initial setting" ➔ "Network PIN code setting
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 31
    Wired LAN factory default settings Wired factory default Select "Wired factory default" in the Network menu and press SELECT button. All the wired LAN settings will go back to the factory default settings. For details, refer to "Wired LAN factory default settings" (p.32). 31
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 32
    Chapter 4 Wired LAN configurations Wired LAN factory default settings Parameter IP CONFIGURATION Wired 1 MANUAL SELECTED LAN Wired 2 DHCP Wired 3 MANUAL IP ADDRESS 169.254.100.100 192.168.100.100 192.168.100.100 SUBNET MASK 255.255.0.0 255.255.255.0 255.255.255.0 GATEWAY
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 33
    equipped with a Wireless LAN card adapter which supports IEEE 802.11b/g. If connecting in Infrastructure mode with an access point, the access point is required to support IEEE 802.11b/g. Caution: Do not use a mobile phone or PHS near (within 20cm/8inch) the projector. It may cause malfunction. 33
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 34
    button to set. SSID/ESSID for the network type "Infrastructure" and "AdHoc" are required to be entered the same characters into the projector, the access point, and the Wireless LAN compatible computer (up to 32 characters). Characters can be selected from A~Z, a~z, blank (space), 0-9, or - (hyphen
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 35
    of WEP, WPA-PSK, WPA2-PSK security, select "Next". Refer to "Configuring security with the projector" on next page for details. Item Description DHCP Sets DHCP function On or Off. When you setup the network setting manually, select "Off". When its set On, IP address, Subnet, Gateway and DNS are
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 36
    to move among the items and adjust setting; use the Point 7 8 buttons to move among the character positions of the key entry fields. This projector provides the following security options. Use optimum security option on your network environment. WEP64(40)bit Open WEP64(40)bit Share WEP128(104)bit
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 37
    Configuring security with the projector Use of security type "WEP" 1. Use the Point ed buttons to select "WEP" security type. 2. Select "Key index". Use the Point ed buttons to choose
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 38
    -PSK" and "WPA2-PSK" modes are not available when the "AdHoc" network type is selected. * When you set the PSK keys with 64 digits, the projector checks whether all of the entered PSK keys are in Hex code or not. If any of the ASCII code is included in the entered
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 39
    start. Switching will take a while and after completing the operation the message "Ready for use" will appear. During the switching period, the projector cannot be operated. ("SIMPLE" LAN settings will be shown by pressing SELECT button. The settings cannot be changed.) 4. Activate "Network Capture
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 40
    LAN Configurations" ➔ "Network PIN code" (p.30). Network information Display the current LAN connecting environment. Select "Network Information" from the projector menu and press SELECT button. Wireless Information (Example) Wireless factory default Select "Network factory default" in the Network
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 41
    wireless communication is established with the access-point or the computer in the network, the WIRELESS indicator on the top panel lights up. While the projector scans the equipment in the network, the WIRELESS indicator blinks. WIRELESS indicator 41
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 42
    default settings for Wireless 4, Wireless 5, and Wireless Simple as follows. Setting Items Wireless 4 Selected LAN Wireless 5 Wireless Simple IP CONFIGURATION MANUAL DHCP MANUAL IP ADDRESS 169.254.100.100 192.168.100.100 169.254. * . * SUBNETMASK 255.255.0.0 255.255.255.0 255.255
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 43
    and operation Describes basic operation and settings below by using the web browser. • Initial setting Setup the basic setting such as Projector name, Network PIN code, Time setting, etc. • Network setting Configure Wired/Wireless LAN environment. • E-mail Setting Configure E-mail function to
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 44
    and the login Network PIN code onto the Password text area and then click Log in button. * The entered User Name must be "user" and it can not be changed. [Note] When the projector is accessed for the first time or the Network PIN code "0000" is set, the auto-login is performed
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 45
    . Main menu For selection of control and setting items of the projector. Setting page Displays the control and setting items according to the selected (p.48) ✐T his Standard mode display is mainly used through this manual for the setting and control description. ✐If your computer does not have
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 46
    Flash Player. (☞p.45) How to use the setting page To control and set up the projector, use the setting menus on the web browser. The basic operation and procedures commonly used on this manual are described below. Example of the Setting Page The setting pallet appears after clicking the item
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 47
    Type of the setting pallet Text box setting Enter the number or text and then click Set button. or Change a value with s or t button and then click Set button. The value changes quickly when s or t button is kept pressing. Pull-down menu setting Select an item with pull-down menu button and then
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 48
    display language on the setting page. English or Japanese. Model name Indicates the model name of the projector. Projector name.......Sets the name of projector. This projector name is listed on the application window of the Network Capture software. Network PIN code Sets the Network PIN code to
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 49
    owner's manual for further details of the PJLink function. ✐ 1 to 32 alphanumeric characters can be used for the password. What's PJLink? The projectors equipped with PJLink function can be used together on the same network, regardless of model or brand, for centralized control and monitoring
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 50
    . The timer icon appears when time is set up correctly. Current time Indicates current date and time set on the projector Date Sets date in manual Time Sets time in manual Date and time setting NTP is abbreviated expressions of Network Time Protocol. It is a protocol to acquire the exact current
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 51
    Default Setting". Item Description Change setting.......Selects LAN1 to LAN5 and Simple IP configuration......Sets DHCP or Manual IP address Sets IP address of the projector Subnet mask............Sets Subnet mask. Default gateway*1...........Sets IP address of the default gateway (Router) DNS
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 52
    up manually if the DNS address information is not provided on your DHCP server. When selecting "Manual", configure all the items manually. to the login page again in 20 seconds. On the screen of the projector, the "Please wait..." message will appear and switching operation will start. Switching
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 53
    though all characters on the Wireless information is uppercase, it is necessary to distinguish between upper case and lower case characters. Channel If you use the projector in 802.11AdHoc mode, select the channel, from 1 to 11. 53
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 54
    Chapter 6 Basic setting and operation Configuring wireless LAN security setting Click page [3] of setting pages. Following wireless LAN security setting can be done. After completing the configuration, press Set button. Item Description Network security....Sets the type of encryption. Following
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 55
    setting E-mail setting This product has an E-mail function which can send an alert message to users or an administrator if it detects an abnormality on the projector or run out of the life span of the lamp. Click E-mail Setting on the main menu and follow the below steps. Item Description SMTP
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 56
    PJ lamp is off. o When PJ lamp replacement time lamp goes out without user operation. "When PJ is turned into Standby in proper user operation" signifies that the projector is turned on by using the web browser and then it is turned into standby with ON/STANDBY button on the top control or the remote
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 57
    2007 00:59 Projector Model Name: model name TCP/IP: 192.168.1.201 Projector Name: Proj05 It sends you following message. *The Projector lamp is turned off, because Projector power circuit is failed. Unplug the Projector from AC outlet and ask servicing to qualified service personnel. MAIN, P-FAIL
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 58
    Model Name: model name TCP/IP: 192.168.1.201 Projector Name: Proj05 It sends you following message. *The PJ lamp replace time is reached. ✐ Replace it with a new lamp immediately and reset the lamp counter. If the projector is used without resetting the lamp counter, the alert mail is sent to users
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 59
    Click SNMP Setting on the main menu and set up each item. PJ information Item Description Contact Enter user name of the projector etc. (optional) Place Enter place of the projector (optional) Community name(refer Enter community name (read only). Default name is "public". ✐The SNMP agent
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 60
    Chapter 6 Basic setting and operation Trap Item Description Community name Enter community name to send "Trap". Default name is "public". Trap address Enter IP address of the SNMP manager computer to receive "Trap". Up to 10 addresses can be registered. ✐ Up to 10 trap addresses can be
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 61
    lamp is off. o When PJ lamp replacement time lamp goes out without user operation. "When PJ is turned into Standby in proper user operation" signifies that the projector is turned on by using the web browser and then it is turned into standby with ON/ STANDBY button on the top control or the remote
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 62
    Chapter 6 Basic setting and operation 62
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 63
    7 Chapter 7. Controlling the projector Describes controlling and setting of the projector by using the web browser. 63
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 64
    the "ON" or "Standby" button. PJ temp. Inside temp.A Displays the surrounding temperature of lamp in the projector. Inside temp.B Displays the surrounding temperature of panel in the projector. External temp Displays the surrounding temperature of the intake vent The warning icon will appear if
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 65
    into standby mode. Power failure Power failure has occurred inside the projector. Projector is turned off. Unplug the AC cord and contact a qualified service personnel for service. If the power failure occurs on the projector, "Power failure" is indicated on the status column and the information
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 66
    differs depending on the contents of the page. Click on the page number to change pages and select desired setting items. ✐ Please see the owner's manual of the projector to have the further information of each control item. Input This function is to select the input mode and source mode of the
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 67
    function is to select the system of signal input to the projector. The available system modes are listed on the pull-down computer system of the input signal. * The computer system modes (VGA, SVGA, XGA. SXGA, UXGA, WXGA...) which meet the input signal listed. Available selection at the
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 68
    Chapter 7 Controlling the projector Image adjustment This function is to adjust the projected picture image and save the image mode. To store the adjusted value, click Store button, and
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 69
    Controls Sound This function is to adjust the sound of the projector. The values in the text box represent the current control value or status. Item Description Volume Adjusts the sound volume from the speakers. Mute Suppresses the sound. 69
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 70
    . This function is to adjust the signal from the computer connected to the projector to obtain the proper picture image on the screen. Item Description Current mode...........Displays a current mode like VGA, SVGA, XGA, SXGA, UXGA, WXGA, etc. or MODE1 - MODE5 are the customized mode created by
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 71
    Click Setting on the main menu. This function is to set up the projector. Select the sub menu [Screen setting], [Setting 1] or , [Setting 2] and then set up each setting. Item Description Screen Switches the screen mode. There may not
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 72
    Lamp control...........Selects the lamp control mode. Lamp life control....Sets the lamp life control mode after exceeding the recommended total use time of the lamp. Remote control...........Sets the remote control code. Key lock Sets the prohibition of controls either Projector or Remote
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 73
    the time to indicate the filter warning message on the screen. Item Description Factory default Sets all of the projector control items to the factory default setting except the following items. Lamp Corres. Value, PJ time, Filter time, PIN code lock and Logo PIN code lock. No show Sets the
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 74
    . Click Timer on the main menu. "---" will appear on the current time when the time is not set up correctly. Present time set on the projector Select date Select day Set execute time Event action How to set the timer 1 Set a day or date To set the timer event at the
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 75
    event action Select an event action from the pull-down menu. Event Action ON Turns on the projector OFF Turns off the projector Lamp Normal Changes lamp mode to "Normal" Lamp Eco Changes lamp mode to "Eco" 4 Register an event Click Set button to register the set timer event. Repeat steps
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 76
    secondary events (event 4 and event 6) will become effective if a person turns off the projector (after event 3 and before event 4) or turns on the projector (after event 5 and before event 6). Invalid event Projector Power OFF ON OFF ON Invalid event OFF Event 1 Event 2 Event 3 Event 4 Event
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 77
    the basic information of the projector status. Click Information on the main menu. Items Description Input Displays selected input and source. System Displays selected signal system. Signal Input signal status Screen Displays screen mode. Lamp status Displays lamp status with an animation
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 78
    with X Red/Red with X Lamp failure (Lamp failure, check the lamp condition) Lamp failure (Lamp failure and lamp is being used over a specified use time, replace the lamp immediately) Items Description PJ time Displays the accumulated use time of the projector. Lamp Corres. Value Displays the
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 79
    can control and set up them together. Click Multi Control on the main menu to display the control page. Note:  To control the multiple projectors, each projector must be set the same Network PIN code. Example of multi control PJ1 PJ2 PJ3 PJ4 PC6 PC5 PC4 Select Input2 for PJ1 to PJ4
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 80
    Start/stop the multi control To start or stop controlling the multi-projectors, click Multi control setting menu and select ON or OFF. Multi control setting OFF...........Stops multi control function ON Starts multi control function. The multi
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 81
    below. * The word "none" is displayed if the "Memo" function is used. * When you click on a listed IP address, the login page for the selected projector will be displayed with a new window. IP address Status Memo Page no. Click here to close the sub menu Check & Change
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 82
    Deleting from the multi-control * The multi control item is not available with the light mode. Status If some of the registered projectors are disabled by some reasons (such as disconnecting the power source, disconnecting the LAN cable, disconnecting from the network), control changes will
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 83
    setting and adjust controls of each menu. The setting value is applied to the registered projectors sequentially . ✐ This is effective only if the multi control item of the registered projector is set to either "Control & Image" or "Control". Setting all together "E-mail setting", "SNMP setting
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 84
    Chapter 7 Controlling the projector 84
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 85
    8 Chapter 8. Network capture functions Network Capture is a function to display the screen image of the computer via the network. - Real Time Capture 85
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 86
    About Network Capture function The Network Capture is a function to display the screen image of the computer which has a Network Capture 5 software by the projector through the network. This function has a mode as below. - Real Time Capture (+p.89) A function to display the screen image of the
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 87
    when "Select capturing object" is checked on the parameter setting. (p.88) Parameter set up Sets the communication parameter between the computer and projector. For further information, see item "Parameter set up" on the next page. Window show Displays the application window on the screen
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 88
    Select a capturing picture quality among "High, "Medium", "Low" q Reduce image........ Check if the capturing image resolution is more than projector's panel resolution (XGA), Capture start up time....... Sets the delayed time from the capture start in second. ✐ To check the Capture Port number
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 89
    the Real Time Capture function is depending on the network environment and data volume of the image. It cannot be supported for movie pictures. ✐ The projector can not reproduce the sound during the real time capturing. ✐ "Spinning wait cursor " cannot be captured. ✐ If you start capturing
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 90
    will disappear and then the screen image of the computer will appear on the projected screen in real time. * You can select multiple projectors (up to 5) on the projector list. • To stop capturing, click One-shot capture on the popup menu appearing by clicking on the Network Capture 5 icon on the
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 91
    PC1 with PJ2. PC6 * Star t capturing of the PC1 from the PC5. Select "Network" as input mode previously. 1 Access to the control page of the projector by using the web browser. From the Network menu, click Capture tab to display the setting page. 2 Select the computer number from the pull-down
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 92
    If the error message appears, check item "Parameter set up" (+ p.88). ✐The projector does not provide the function to register the IP address of the computer and to set the (☞ p.89). ✐The remote control which is provided with the projector does not have the mouse operating function. 92
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 93
    select: Wired 1/2/3 or Wireless Simple The searching result becomes only one projector. Computer PC1: Log in by Administrative The wireless LAN card or the Wired LAN card: Provided, Network Capture 5 software: N IL Activate MacAutoCap5 in USB thumb drive Before using wired LAN
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 94
    using wireless mouse function, control the page browsing and some other operations for the PC1. ✐ F or further instructions of the wireless mouse, please refer to the projector's owners manual. ✐ O n the projected screen using with the network capture, the shape of the mouse pointer differs from
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 95
    9 Chapter 9. Appendix Use of telnet Web browser setting Firewall setting Troubleshooting Terminology 95
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 96
    *1 installed on your computer. Normally, the telnet application is available on your computer. * The telnet 10000 port is used to control the projector. Control (For example, in case of using the telnet application of Mac OS X v 10.4) 1. Select Terminal from Applications -->Utilities. Type as below
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 97
    The table below shows the typical command lists for controlling this projector and please consult your local dealer for further information of another on C1D menu display off *1 Further instructions about the telnet application, please see the on-line guide on your computer. *2 The password is
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 98
    is set not to use this JavaScript function, it may not control the projector properly. In that case, the following warning message will be displayed on the top of the page. To enable the JavaScript, please see further instructions on the next page. Flash Player enable The setting page of this
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 99
    Examples: OS/Browsers MAC OS X v 10.4 Web browser setting Safari JavaScript and Flash Player enable setting Select Preferences... from Safari on the web browser and then select Security tab and check Enable plug-ins (for flash player) and Enable JavaScript. 99
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 100
    address and port correctly in Web Proxy Server window. For further instruction please consult your network administrator. - Not using proxy server Uncheck HTTPS) of Select a proxy server to configure. If you connect the projector to the computer directly with UTP cross cable, they must be unchecked
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 101
    Firewall setting Firewall setting for MAC OS X v 10.4 When you use Macintosh OS X v 10.4 and Network Capture 5, you can cancel the firewall blocking following to the steps below; 1 Open System Preferences from Apple menu, click Sharing icon. The Sharing setting window will appear. 2 Select
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 102
    Preference from Apple menu, click Security icon. A security setting window appears. 2 Select Firewall tab, check Limit incoming connections to specific services and applications, and then click "+". A finder menu appears. 3 Select Network Capture 5 and click add button. The application name will
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 103
    If you have any trouble in setup or operation of the projector, refer to the troubleshooting items and check the relevant matters described. ■ The computer cannot connect projectors. Wired LAN Is the LAN cable connected to the projector properly? Is the LINK/ACT lamp of the LAN terminal
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 104
    points may have the DHCP function. For detail of the settings, refer to the owner's manual for the devices or consult a system administrator of the network. Is the segment where the projector is installed different from the computer? Specify IP Address directly on the optional setting. Refer to
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 105
    yours is existing closely, the networking speed may be reduced or the communication unstable. Change the channel to resolve the problem. The channels of the projector and projector Client computer must be the same. Or adjust the Quality selection in the parameter setting. Refer to "Parameter set up
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 106
    Chapter 9 Appendix Auto Caputure ■ I have deleted the AutoCapture program file on the supplied USB memory. I want to perform the AutoCapture with a commercially available USB memory. To perform Auto Capture, you should have all files and folders of "Auto Capture" folder on 'Network Viewer &
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 107
    Ask your system administrator whether the DHCP server is operating. ESSID (Extended Service Set Identifier) ESSID is the ID that is set to computers on 802.11b High-Rate. Only the products that have passed an inter-operation test carried by WECA is approved as Wi-Fi. Any products approved as Wi-
  • Sanyo PLC-XU305A | Owner's Manual Network Mac - Page 108
    SO-MAC-KG5AE NETWORK OWNER'S MANUAL FOR MACINTOSH
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
Network Set-up and Operation
For Macintosh
Wired and Wireless Setting
Projector Set-up and Operation
Network Capture
Owner’s Manual
This is the manual for the Network function.
Read this manual thoroughly to operate the Network function.
First, read the owner's manual of the projector to understand the basic operation of the
projector and the safety instructions.
The safety instructions in the owner's manuals should be followed strictly.