Sanyo PLC-XU305A RS232 Basic

Sanyo PLC-XU305A - 3000 Manual

Get Sanyo PLC-XU305A - 3000 PDF manuals and user guides
UPC - 086483076312
View all Sanyo PLC-XU305A manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo PLC-XU305A manual content summary:

  • Sanyo PLC-XU305A | RS232 Basic - Page 1
    BASIC SERIAL COMMAND SPECIFICATIONS PLC-XU305A PLC-XU355A Ver.1.00 SANYO Electric Co., Ltd DS Company Projector Division
  • Sanyo PLC-XU305A | RS232 Basic - Page 2
    PLC-XU305A/355A Basic Serial Command Specifications CONTENTS 1. Overview ...5 2. Serial Interface Specifications 5 2.1. Transfer Specifications 5 2.2. Connection ...5 3 Notes for Communication 6 4. Functional Execution Command Table 7 5. Status Read Command Table 9 6. Functional
  • Sanyo PLC-XU305A | RS232 Basic - Page 3
    PLC-XU305A/355A Basic Serial Command Specifications 6.32. BRIGHTNESS + Command 16 6.33. BRIGHTNESS - Command 16 7.3. Operation Requirements 22 7.4. Status Read Command 23 7.5. Input Mode Read Command 25 7.6. Lamp Time Read Command 25 7.7. Setting Read Command 25 7.8. Temp Read Command 25 3/26
  • Sanyo PLC-XU305A | RS232 Basic - Page 4
    PLC-XU305A/355A Basic Serial Command Specifications 7.9. Lamp Mode Read Command 26 4/26
  • Sanyo PLC-XU305A | RS232 Basic - Page 5
    projector control commands for PLC-XU305A/355A. 1.2. The projector control commands are used to remotely control a projector can be changed in service mode. 2.2. Connection Dedicated serial cable must be used for connection to a computer and a projector. PC COM 1 Projector Control Port (D-Sub 9
  • Sanyo PLC-XU305A | RS232 Basic - Page 6
    PLC-XU305A/355A Basic Serial Command Specifications 3 Notes for Communication 1. The projector control command is defined as one for the interval of 100ms after receiving a response. More than 100ms PC → Projector Projector → PC Command "C" "0" "7" CR ACK CR Next Command Response (A few ms
  • Sanyo PLC-XU305A | RS232 Basic - Page 7
    PLC-XU305A/355A Basic Serial Command Specifications 4. Functional Execution Command Table Command Item C00 POWER ON C01 POWER OFF (Quick Power OFF) C02 POWER OFF C03 ――― C04 ―――
  • Sanyo PLC-XU305A | RS232 Basic - Page 8
    PLC-XU305A/355A Basic Serial Command Specifications Command C40 C41 C42 C43 C44 C45 C46 C47 C48 C49 C4A C4B C4C C4D C4E C4F C50 C51 C52
  • Sanyo PLC-XU305A | RS232 Basic - Page 9
    PLC-XU305A/355A Basic Serial Command Specifications 5. Status Read Command Table Command CR0 CR1 CR2 Item Status Read Input Mode Read ――― CR3 (Corresponding) Lamp Time Read CR4 CR5 Setting Read ――― CR6 Temp Read CR7 Lamp Mode Read ――― means no function. Memo 9/26
  • Sanyo PLC-XU305A | RS232 Basic - Page 10
    PLC-XU305A/355A Basic Serial Command Specifications 6. Functional Execution Command 6.1. Format 6.1.1 PC issues a command in format as below. "C" COMMAND [CR] Command: two characters (See Basic Functional Execution Command Table) A projector same as that of the remote control; 6.2.1. System: issues
  • Sanyo PLC-XU305A | RS232 Basic - Page 11
    PLC-XU305A/355A Basic Serial Command Specifications 6.4. Operation Requirements 6.4.1. When the projector's status is any of below, Functional Execution Commands are limited. Projector Status Standby Mode Countdown in process Cooling Down in process Cooling Down due to Abnormal Temperature
  • Sanyo PLC-XU305A | RS232 Basic - Page 12
    PLC-XU305A/355A Basic Serial Command Specifications 6.5. POWER ON Command Command "C00" OFF (Standby). The command operates the same Power OFF function as ON/STAND-BY button of the projector and remote control. Once this command is sent, "Power OFF?" is displayed. If this command is sent again
  • Sanyo PLC-XU305A | RS232 Basic - Page 13
    PLC-XU305A/355A Basic Serial Command Specifications 6.10. Video Command Command "C07" [CR] Detail Select Video Input Although Input search is set to On1 or On2, Input search is not executed with this command while projector same way as "MUTE" button of the remote control for Mute ON, but does not
  • Sanyo PLC-XU305A | RS232 Basic - Page 14
    PLC-XU305A/355A Basic Serial Command Specifications 6.16. VIDEO MUTE ON Command Command "C0D"[CR] Detail Video Mute ON. This command works the same way as "NO SHOW" button of the remote control for No Show ON, but does not work for No Show OFF. Acceptable [ACK] [CR] Response Unacceptable " "[CR
  • Sanyo PLC-XU305A | RS232 Basic - Page 15
    PLC-XU305A/355A Basic Serial Command Specifications 6.22. Image Cinema Command Command "C13" [CR] Detail Set image to Cinema mode. Acceptable [ACK] [CR] Response Unacceptable " "[CR] 6.23.
  • Sanyo PLC-XU305A | RS232 Basic - Page 16
    PLC-XU305A/355A Basic Serial Command Specifications 6.29. MENU ON Command Command "C1C" [CR] Brightness of User Control -1. Acceptable [ACK] [CR] Response Unacceptable " "[CR] 6.34. Computer 2 RGB Command Command "C25"[CR] Detail Select RGB input in Computer2. Although projector returns "OK
  • Sanyo PLC-XU305A | RS232 Basic - Page 17
    PLC-XU305A/355A Basic Serial Command Specifications 6.35. IMAGE (Toggle) Command Command "C27"[CR] Detail Switch Image Setting status. This command works the same way as "IMAGE" button of the remote control. Acceptable [ACK] [CR] Response Unacceptable " "[CR] 6.36. ON START Setting Command
  • Sanyo PLC-XU305A | RS232 Basic - Page 18
    PLC-XU305A/355A Basic Serial Command Specifications 6.41. D.ZOOM + Command Command "C30" [CR] Detail Enter Digital Zoom mode and expand image size. This command works the same way as "D.ZOOM ▲" button of the remote from the pointer ">" of the projector and remote control, and has no function of
  • Sanyo PLC-XU305A | RS232 Basic - Page 19
    PLC-XU305A/355A Basic Serial Command Specifications 6.47. POINTER UP Command Command "C3C" [CR] Detail Move up the Pointer of On-Screen Display Menu. This command works the same way as the pointer "▲" of the projector same way as "FREEZE" button of the remote control for Freeze ON, but does not
  • Sanyo PLC-XU305A | RS232 Basic - Page 20
    PLC-XU305A/355A Basic Serial Command Specifications 6.53. Computer 1 Scart Command Command "C51" [CR] Detail Select Scart input in Computer 1 Although Input search is set to On1 or On2, Input search is not executed with this command while projector returns "OK". Acceptable [ACK] [CR] Response
  • Sanyo PLC-XU305A | RS232 Basic - Page 21
    PLC-XU305A/355A Basic Serial Command Specifications 6.59. AUTO PC ADJ. Command Command "C89" [CR] Detail Execute Auto PC Adj. function. This command operates the same as "AUTO PC ADJ." of main menu. Projector suspends Auto PC Adj. operation when receiving this command another time. Acceptable [
  • Sanyo PLC-XU305A | RS232 Basic - Page 22
    PLC-XU305A/355A Basic Serial Command Specifications 7. Status Read Command 7.1. Format 7.1.1. PC issues commands in format as below; "CR" Command [CR] Command 1 character(See Basic Status Read Command Table) 7.1.2. When a projector receives the appropriate command, it returns a character line as the
  • Sanyo PLC-XU305A | RS232 Basic - Page 23
    PLC-XU305A/355A Basic Serial Command Specifications 7.4.Status Read Command Command "CR0" [CR] Detail Get the projector's operating status Acceptable "%1" [CR] " on a model. This function is used to cool down the lamps and other optical parts and is quite important for projector's reliability.
  • Sanyo PLC-XU305A | RS232 Basic - Page 24
    PLC-XU305A/355A Basic Serial Command Specifications moves to Power OFF status due Cooling Down in process after turned off due to lamp failure When a projector is turned off because of lamp failure, it automatically starts Cooling Down operation, in which the projector returns "21" [CR]. "81" [CR]
  • Sanyo PLC-XU305A | RS232 Basic - Page 25
    PLC-XU305A Lamp Time Read Command Command "CR3" [CR] Detail Get the total lamp running hours (Not actual lamp data inside the projector. With some temperature sensors installed in the projector, it is possible can be returned due to hardware %3 problems, the first character becomes "E" like"
  • Sanyo PLC-XU305A | RS232 Basic - Page 26
    PLC-XU305A/355A Basic Serial Command Specifications 7.9.Lamp Mode Read Command Command "CR7" [CR] Detail Get lamp mode status. For 1 lamp projector, get if it is lighting or not. Acceptable "%1" [CR] Response %1 "00" [CR]=Light is out. "01" [CR]=Light is on. Unacceptable " "[CR] 26/26
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
BASIC SERIAL COMMAND SPECIFICATIONS
PLC-XU305A
PLC-XU355A
Ver.1.00
SANYO Electric Co., Ltd
DS Company
Projector Division