Sanyo PLC-XU355A Owner's Manual Network Windows

Sanyo PLC-XU355A - 3500 Manual

Get Sanyo PLC-XU355A - 3500 PDF manuals and user guides
UPC - 086483076305
View all Sanyo PLC-XU355A manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo PLC-XU355A manual content summary:

  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 1
    This is the manual for the Network function. Read this manual thoroughly to operate the Network function. First, read the owner's manual of the projector to understand the basic operation of the projector and the safety instructions. The safety instructions in the owner's manuals should be followed
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 2
    This equipment has been tested and found to comply not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Model Number : QXXAVC922---P Trade Name : Sanyo Responsible party : SANYO FISHER COMPANY Address : 21605 Plummer Street,
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 3
    att denna (QXXAVC922---P) står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG. Hér með lýsir SANYO Electric Co., Ltd. yfir því að (QXXAVC922---P) er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 4
    ● SANYO Electric Co., Ltd. assumes no responsibility for the loss or damage of data, or damage of the computer caused by using this projector. Making manual This manual does not provide the description of basic operation and functions for computer, web browser, projector and network. For instructions
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 5
    environment...34 Setting procedures...34 Configuring security with the projector 36 Easy wireless setting...39 Network PIN code...40 Network information...40 Wireless factory default...40 WIRELESS indicator display...41 Wireless LAN factory default settings...42 6. Basic setting and operation
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 6
    setting...48 Network configuration...51 Configuring wireless LAN setting and security setting 53 E-mail setting...55 SNMP setting...59 7. Controlling the projector 63 Power control and status telnet...128 Web browser setting...130 Firewall setting...135 Troubleshooting...136 Terminology...142 
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 7
    projector via the networks, computers should meet the operating environment below. OS CPU Memory Free HDD Space Screen Resolution Communication Protocol Network Correspond Wireless for Windows Vista 100MB Required to support any of VGA (640 x 480), SVGA (800 x 600), XGA (1024 x 768), The color
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 8
    Network specifications of the projector LAN Terminal Data communication speed Protocol 100Base-TX (100Mbps)/10Base-T (10Mbps) TCP/IP Wireless LAN Interface Communication Mode Data Transfer Speed Wireless Frequency (Channel) Modulation Form Protocol Security Service area IEEE802.11b/g AdHoc
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 9
    1 Chapter 1. About LAN functions This chapter describes the features, the mechanism, and connection procedures of the LAN. 
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 10
    under various network environments to meet the wide-ranging needs of the operation. • Accept both Wired and Wireless LAN environment. When the projector is operated via Wireless LAN, there is no need for wire connection. • Remove the burden of LAN settings. Easy LAN setting function is provided
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 11
    an example of the projection via the LAN. You can project the image on Computer (1) (Wired LAN connection), or Computer (2) (Wireless LAN connection) through the selected projector . 2.0 2.0 1.5 1.5 1.0 1.0 0.5 0.5 0.0 0.0 2.0 1.5 1.0 0.5 0.0 Computer (1) Access point Computer (2) 11
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 12
    communication mode corresponded computer: Infrastructure ■ Wireless LAN, AdHoc Communication Mode Communication mode between Wireless LAN equipment. (Communication mode via SSID/ESSID) Network Projector Wireless communication mode :AdHoc Wireless communication mode corresponded computer: AdHoc 12
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 13
    via the LAN line. LAN connection modes Computer(1) Computer(2) Computer (3) ✳ Operate the computer mouse with the remote control. When the projector's remote control employs mouse operating function, you can operate the computer by the remote control. To use the remote control, point to
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 14
    Chapter 1 About LAN functions 14
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 15
    2 Chapter 2. Setup procedures This chapter describes how to install the Network Capture 5 software and how to set up the networks. 15
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 16
    " (pp.33-42). Detailed LAN configurations need to be done with a browser later. First, complete the Wired or Wireless LAN connection between computers and projectors, then start browser configurations. ➔ "6. Basic setting and operation" (pp.43-62). STEP 3 Network Configuration has completed. Follow
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 17
    Installing the software Installing the software It is required to install the software into your computer to use the Network Capture function . Please install the software as follows. Note: To install the software into the computer with Windows 2000, Windows XP or Windows Vista, you should logon as
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 18
    Chapter 2 Setup procedures As the "License Agreement" will appear, read contents carefully and click Yes button if you agree to the license agreement to proceed with installing. During the installation, following window may appear, click Continue Anyway button. 3 Click Finish to complete the
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 19
    displayed image and the sound of the computer and serves them to the projector via the network. ● Network Viewer 5 (File Converter 1): Converts to , use "Add/Remove Program" from the control panel. *1 This product supports the JPEG image format. This file is needed to convert to the optimized
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 20
    ". ● Network Viewer 5 (File Converter 2): This is a kind of the printer driver to convert to the JPEG data optimized to project by the projector from any of the documents created by the application software. * To uninstall Network Viewer 5 (File Converter 2), just delete the "Network Viewer 5(File
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 21
    3 Chapter 3. Names and functions of the operation screen This chapter describes the functions of each part of the operation screen. 21
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 22
    Chapter 3 Names and functions of the operating screen Network connection standby display Turn on the projector and select either "Wired" or "Wireless" from the input menu of the projector. The "Please wait..." message will be displayed on the screen. After short time, the network connection standby
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 23
    of use with "#" indicates that your computer is now using the network capture function. After double-clicking on a projector name, the web browser gets activated and the projector setup screen will be displayed. Note on Windows Vista When you use the Network Capture 5 software with Windows Vista
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 24
    " (p.39). To restore the easy setting, press the Wireless easy release button. o Moderator registration button Register a computer user as a moderator. !0 Join moderator's group button Join the moderator's group which is selected in the Network Projector list. It is not available if there is no
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 25
    4 Chapter 4. Wired LAN configurations This chapter describes the preparation for Wired LAN setting with projectors and how to set the LAN environment. 25
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 26
    to the LAN line Connect the LAN cable to the LAN connection terminal of the projector. LAN Connection Terminal LINK/ACT Lamp (Orange) Light or blink orange when the projector is connected to the network. LAN Cable Speed Lamp (Green) Light according to the speed of the connected network. 10 Base
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 27
    DHCP Sets DHCP function On or Off. When you setup the network setting manually, select "Off". When it is set On, IP address, Subnet, set according to your network environment *1. IP address Sets IP address of the projector Subnet Sets Subnet mask. Normally sets 255.255.255.0 Gateway*2 Sets IP
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 28
    , the network has not connected yet. Try searching again with the Search PJ button. If error screen appears again, reconfirm the LAN setting. When the projector is set in the location separated by the router, see next page. When Firewall function (Anti-virus software) is effective, network
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 29
    Add button, "IP address set up" window appears. Enter the IP address of the projector and Click OK button. Then, the projector will be added on the "Search specified IP address" window. Multiple projectors are registered and they are stored even when the application is closed. 3. Click OK button
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 30
    you do not want to set the Network PIN code, set "0000". It is recommended to set the Network PIN code if you use the projector via the networks. The Network PIN code can be set also through the networks. See "6. Basic setting and operation" ➔ "Initial setting" ➔ "Network PIN code setting
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 31
    Wired LAN factory default settings Wired factory default Select "Wired factory default" in the Network menu and press SELECT button. All the wired LAN settings will go back to the factory default settings. For details, refer to "Wired LAN factory default settings" (p.32). 31
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 32
    Chapter 4 Wired LAN configurations Wired LAN factory default settings Parameter IP CONFIGURATION Wired 1 MANUAL SELECTED LAN Wired 2 DHCP Wired 3 MANUAL IP ADDRESS 169.254.100.100 192.168.100.100 192.168.100.100 SUBNET MASK 255.255.0.0 255.255.255.0 255.255.255.0 GATEWAY
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 33
    to be equipped with a Wireless LAN card adapter which supports IEEE 802.11b/g. If connecting in Infrastructure mode with an access point, the access point is required to support IEEE 802.11b/g. Caution: Do not use a mobile phone or PHS near (within 20cm/8inch) the projector. It may cause malfunction
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 34
    SSID/ESSID for the network type "Infrastructure" and "AdHoc" are required to be entered the same characters into the projector, the access point, and the Wireless LAN compatible computer (up to 32 characters). Characters can be selected from A~Z, a~z, blank (space), 0-9, or - (hyphen) with the Point
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 35
    with the projector" on next page for details. Item Description DHCP Sets DHCP function On or Off. When you setup the network setting manually, select PSK" and "WPA2-PSK" are not available. SSID/ESSID Identifier of the wireless access point. *1 Set "On" only when the DHCP server is available
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 36
    LAN configurations Configuring security with the projector Configure security with the projector by following the steps below. After configuring the network in "5. Wireless LAN Configurations" (p.33-42), select "Next" in the LAN setting screen and press SELECT button. The security configuration
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 37
    Configuring security with the projector Use of security type "WEP" 1. Use the Point ed buttons to select "WEP" Use the Point 7 8 buttons to select "Set" and press SELECT button to return to the Wireless setting screen. Select "Set" in the Wireless setting screen to complete the network setting. 37
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 38
    Chapter 5 Wireless LAN configurations Use of security type "WPA-PSK", "WPA2-PSK" 1. Use the Point ed when the "AdHoc" network type is selected. * When you set the PSK keys with 64 digits, the projector checks whether all of the entered PSK keys are in Hex code or not. If any of the ASCII code is
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 39
    and Windows Vista, and cannot be used with Windows 2000. Windows XP should be Service Pack 1 or later version. Setting Procedures 1. Turn on the projector and select "Wireless" from the input menu of the projector. 2. Select "LAN mode select" in the Network menu, and press 8 button or SELECT button
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 40
    code" (p.30). Network information Display the current LAN connecting environment. Select "Network Information" from the projector menu and press SELECT button. Wireless Information (Example) Wireless factory default Select "Network factory default" in the Network menu (p.31) and press SELECT button
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 41
    display When the wireless LAN configuration is set up correctly and the wireless communication is established with the access-point or the computer in the network, the WIRELESS indicator on the top panel lights up. While the projector scans the equipment in the network, the WIRELESS indicator blinks
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 42
    LAN factory default settings Factory default settings for Wireless 4, Wireless 5, and Wireless Simple as follows. Setting Items Wireless 4 Selected LAN Wireless 5 Wireless Simple IP CONFIGURATION MANUAL DHCP MANUAL IP ADDRESS 169.254.100.100 192.168.100.100 169.254. * . * SUBNETMASK
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 43
    . • E-mail Setting Configure E-mail function to manage the projector. • SNMP Setting Configure SNMP function to manage the projector. Caution: When operating the projector with the browser, connect the projector to the computer with Wired or Wireless LAN. Complete the connection in advance. 43
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 44
    the Password text area and then click OK button. * The entered User Name must be "user" and it can not be changed. [Note] When the projector is accessed for the first time or the Network PIN code "0000" is set, the auto-login is performed and the next main setting page
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 45
    . Main menu For selection of control and setting items of the projector. Setting page Displays the control and setting items according to the selected (p.48) ✐T his Standard mode display is mainly used through this manual for the setting and control description. ✐If your computer does not have
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 46
    in the folder or program. How to use the setting page To control and set up the projector, use the setting menus on the web browser. The basic operation and procedures commonly used on this manual are described below. Example of the Setting Page The setting pallet appears after clicking the item
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 47
    Type of the setting pallet Text box setting Enter the number or text and then click Set button. or Change a value with s or t button and then click Set button. The value changes quickly when s or t button is kept pressing. Pull-down menu setting Select an item with pull-down menu button and then
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 48
    Switches display language on the setting page. English or Japanese. Model name Indicates the model name of the projector. Projector name.......Sets the name of projector. This projector name is listed on the application window of the Network Capture software. Network PIN code Sets the Network
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 49
    set with the PJLink pull-down menu, the password must be required. Enter a password* onto the text box and click Set button. Refer to the projector owner's manual for further details of the PJLink function. ✐ 1 to 32 alphanumeric characters can be used for the password. What's PJLink? The
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 50
    current date and time set on the projector Date Sets date in manual Time Sets time in manual Date and time setting NTP is abbreviated projector turns off ( when "Eco" is set for the stand-by mode (Refer to p.72)), or the network configuration is reset, or the input mode "Wired" or "Wireless
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 51
    ) LAN4(Wireless) LAN5(Wireless) Simple(Wireless) For the default setting of the above LAN, see the items "Factory Default Setting". Item Description Change setting.......Selects LAN1 to LAN5 and Simple IP configuration......Sets DHCP or Manual IP address Sets IP address of the projector Subnet
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 52
    up manually if the DNS address information is not provided on your DHCP server. When selecting "Manual", configure all the items manually. For will appear. During the switching period, the projector cannot be operated. When you use LAN4(wireless) or LAN5(Wireless), the setting items of page [2] and
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 53
    (up to ASCII 32 characters) SSID/ESSID is case-sensitive. Even though all characters on the Wireless information is uppercase, it is necessary to distinguish between upper case and lower case characters. Channel If you use the projector in 802.11AdHoc mode, select the channel, from 1 to 11. 53
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 54
    LAN security setting Click page [3] of setting pages. Following wireless LAN security setting can be done. After completing the configuration, press Set button. Item Description Network security....Sets the type of encryption. Following types are
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 55
    an E-mail function which can send an alert message to users or an administrator if it detects an abnormality on the projector or run out of the life span of the lamp. Click E-mail Setting on the main menu and follow the below steps. Item Description SMTP server*1..........Sets server name or IP
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 56
    Play is failed. without user operation. "When PJ is turned into Standby in proper user operation" signifies that the projector is turned on by using the web browser [3 o When lamp Corres. Value reaches [ ] hours. Attached message and then it is turned into standby with ON/STANDBY button on the
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 57
    Model Name: model name TCP/IP: 192.168.1.201 Projector Name: Proj05 It sends you following message. *The Projector lamp is turned off, because Projector power circuit is failed. Unplug the Projector from AC outlet and ask servicing to qualified service personnel. MAIN, P-FAIL OK MAIN, 1.8V OK MCI
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 58
    sent when the mail sending condition "When the life span of lamp is reached" is unchecked. ● When lamp corres. value reaches preselect use time: TITLE: Message from projector 10-03-2007 00:59 Projector Model Name: model name TCP/IP: 192.168.1.201 Projector Name: Proj05 It sends you following message
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 59
    in a community, Refer (read only) and Set (read- write). This product allows to use Refer (read only) only. The SNMP message informs the projector status called "Trap" to an administrator. Click SNMP Setting on the main menu and set up each item. PJ information Item Description Contact Enter
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 60
    Chapter 6 Basic setting and operation Trap Item Description Community name Enter community name to send "Trap". Default name is "public". Trap address Enter IP address of the SNMP manager computer to receive "Trap". Up to 10 address can be registered. ✐ Up to 10 trap addresses can be
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 61
    is interrupted. o When Auto Play is failed. o When lamp Corres. Value reaches [ ] hours. ✐ "When PJ lamp is off" signifies the lamp goes out without user operation. "When PJ is turned into Standby in proper user operation" signifies that the projector is turned on by using the web browser and then
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 62
    Chapter 6 Basic setting and operation 62
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 63
    7 Chapter 7. Controlling the projector Describes controlling and setting of the projector by using the web browser. 63
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 64
    the "ON" or "Standby" button. PJ temp. Inside temp.A Displays the surrounding temperature of lamp in the projector. Inside temp.B Displays the surrounding temperature of panel in the projector. External temp Displays the surrounding temperature of the intake vent The warning icon will appear if
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 65
    into standby mode. Power failure Power failure has occurred inside the projector. Projector is turned off. Unplug the AC cord and contact a qualified service personnel for service. If the power failure occurs on the projector, "Power failure" is indicated on the status column and the information
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 66
    depending on the contents of the page. Click on the page number to change pages and select desired setting items. ✐ Please see the owner's manual of the projector to have the further informa- tion of each control item. Input This function is to select the input mode and source mode of the
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 67
    function is to select the system of signal input to the projector. The available system mode are listed on the pull-down computer system of the input signal. * The computer system modes (VGA, SVGA, XGA. SXGA, UXGA, WXGA...) which meet the input signal listed. Available selection at the
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 68
    Chapter 7 Controlling the projector Image adjustment This function is to adjust the projected picture image and save the image mode. To store the adjusted value, click Store button, and
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 69
    Controls Sound This function is to adjust the sound of the projector. The values in the text box represent the current control value or status. Item Description Volume Adjusts the sound volume from the speakers. Mute Suppresses the sound. 69
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 70
    . This function is to adjust the signal from the computer connected to the projector to obtain the proper picture image on the screen. Item Description Current mode...........Displays a current mode like VGA, SVGA, XGA, SXGA, UXGA, WXGA, etc. or MODE1 - MODE5 are the customized mode created by
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 71
    Click Setting on the main menu. This function is to set up the projector. Select the sub menu [Screen setting], [Setting 1] or , [Setting 2] and then set up each setting. Item Description Screen Switches the screen mode. There may not
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 72
    control...........Selects the lamp control mode. Lamp life control....Sets the lamp life control mode after exceeding the recommended total use time of the lamp. Remote control...........Sets the remote control code. Key lock Sets the prohibition of controls either Projector or Remote control
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 73
    the time to indicate the filter warning message on the screen. Item Description Factory default Sets all of the projector control items to the factory default setting except the following items. Lamp Corres. Value, PJ time, Filter time, PIN code lock and Logo PIN code lock. No show Sets the
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 74
    built-in battery. The date and time information are lost when the projector turns off (when "Eco" is set for the stand-by mode (Refer to p.72)), or the network configuration is reset, or the input mode "Wired" or "Wireless" is turned. The timer function is disable until time is set up
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 75
    event action Select an event action from the pull-down menu. Event Action ON Turns on the projector OFF Turns off the projector Lamp Normal Changes lamp mode to "Normal" Lamp Eco Changes lamp mode to "Eco" 4 Register an event Click Set button to register the set timer event. Repeat steps
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 76
    secondary events (event 4 and event 6) will become effective if a person turns off the projector (after event 3 and before event 4) or turns on the projector (after event 5 and before event 6). Invalid event Projector Power OFF ON OFF ON Invalid event OFF Event 1 Event 2 Event 3 Event 4 Event
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 77
    the basic information of the projector status. Click Information on the main menu. Items Description Input Displays selected input and source. System Displays selected signal system. Signal Input signal status Screen Displays screen mode. Lamp status Displays lamp status with an animation
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 78
    with X Red/Red with X Lamp failure (Lamp failure, check the lamp condition) Lamp failure (Lamp failure and lamp is being used over a specified use time, replace the lamp immediately) Items Description PJ time Displays the accumulated use time of the projector. Lamp Corres. Value Displays the
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 79
    can control and set up them together. Click Multi Control on the main menu to display the control page. Note:  To control the multiple projectors, each projector must be set the same Network PIN code. Example of multi control PJ1 PJ2 PJ3 PJ4 PC6 PC5 PC4 Select Input2 for PJ1 to PJ4
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 80
    Start/stop the multi control To start or stop controlling the multi-projectors, click Multi control setting menu and select ON or OFF. Multi control setting OFF...........Stops multi control function ON Starts multi control function. The multi
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 81
    below. * The word "none" is displayed if the "Memo" function is used. * When you click on a listed IP address, the login page for the selected projector will be displayed with a new window. IP address Status Memo Page no. Click here to close the sub menu Check & Change
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 82
    item is not changed during using the network viewer function. It is not available with the light mode. Status If some of the registered projectors are disabled by some reasons (such as disconnecting the power source, disconnecting the LAN cable, disconnecting from the network), control changes will
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 83
    setting and adjust controls of each menu. The setting value is applied to the registered projectors sequentially . ✐ This is effective only if the multi control item of the registered projector is set to either "Control & Image" or "Control". Setting all together "E-mail setting", "SNMP setting
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 84
    - "Network Viewer" menu). Set the display time periods and repeat times for the auto image display. After clicking Start button, the registered projectors start playing back the auto image display in sequential. ✐ F or further information of the Auto display, see "Using the network viewer function
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 85
    8 Chapter 8. Network capture functions Network Capture is a function to display the screen image and reproduce the sound of the computer via the network. - Real Time Capture - Network Communication - Moderator Function 85
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 86
    Network Capture is a function to display the screen image and reproduce the sound of the computer which has a Network Capture 5 software by the projector through the network. This function has 3 kinds of mode as below. - Real Time Capture (+p.89) A function to display the screen image and reproduce
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 87
    shot capture Transfers the one-shot screen image of the computer. Capture transfer Transfers the screen image of the computer to the projector. The captured image edit window appears on the computer screen. Select capture object Sets to display the capture window selection dialog. * This
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 88
    a capturing picture quality among "High, "Medium", "Low" q Reduce image........ Check if the capturing image resolution is more than projector's panel resolution (XGA), q Layer window capture.. Check if layer window image capturing. Capture start up time....... Sets the delayed time from the
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 89
    real time capture function, the projector may not be able to reproduce the sound. To reproduce the sound in the projector correctly, follow the procedures below; the network environment and data volume of the image. It cannot be supported for movie pictures. ✐ If you start capturing with the Select
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 90
    will disappear and then the screen image of the computer will appear on the projected screen in real time. * You can select multiple projectors (up to 5) on the projector list. • To stop capturing, click One-shot capture on the popup menu appearing by clicking on the Network Capture 5 icon on the
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 91
    Select "Network" as input mode previously. 1 Access to the control page of the projector by using the web browser. From the Network menu, click Capture tab to display the real time capturing operation. Set "On" when using the wireless mouse function ✐ The IP address of the connecting PC should
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 92
    Disconnect" and then press SELECT button. Set "On" when using the wireless mouse function ✐ The IP address of the connecting PC should be message appears, check item "Parameter set up" (+ p.88). ✐The projector does not provide the function to register the IP address of the computer and
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 93
    of a commercial-release USB thumb drive by drag and drop. 2. Turn on the projector and select "Wireless" from the input menu of the projector. 3. Select "Wireless Setting" from the "Network" menu of the projector and press SELECT button. Select "SIMPLE" with the Point 7 8 buttons. (☞ p.39) 4. By
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 94
    mouse function, control the page browsing and some other operations for the PC1. ✐ F or further instructions of the wireless mouse, please refer to the projector's owners manual. ✐ O n the projected screen using with the network capture, the shape of the mouse pointer differs from the one
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 95
    "Communication Setting" from menu "Network"-"Capture"-"Page 2". Confirm that the item Auto search subject PC is "ON". If "OFF", change mode to "ON". * Projector can find up to 30 computers in the network. [2] When serving the capture data to the specific subject computers in the network. Set the
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 96
    mode End Editing * sub pc only Closes the Editing window Control Capture transfer Captures a screen image and sends it to the projector Authority Acquires/releases the authority to edit the capture image Edit Tool Pencil Selects a pencil tool Eraser Selects an eraser tool
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 97
    Using the Network Communication Tool bar button names The following commands are assigned to the tool bar buttons. For each operation, refer to the description of the item "Menu tree". Command Tool Save Bar of Main PC communication Terminate Communication Capture transfer Authority Attribute
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 98
    Start Communication button. The application window disappears and the capture editing window with a captured image appears on the computer screen. The projector displays captured image on the screen. ✐ If an error message appears, check the item "Parameter set up". (☞p.88) Join the communication
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 99
    Edit capture image How to use the Network communication Drawing figures 1 Click " :Pencil" button on the form tool bar. 2 Select its attribute (shape, width, color and translucence) from the form and attribute tool bar. 3 Drag a mouse pointer on the screen image to draw the figure. Erase drawn
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 100
    Chapter 8 Network capture functions Drawing letter 1 Click " :Letter frame" button on the form tool bar. 2 Select a color of text with color tool bar. 3 Drag a mouse pointer on the screen image to specify the area of the letter frame. The letter input dialog window will appear. 4 E nter the
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 101
    can be used under the environment which one or more computers are connected to the projector via the network. Preparation Start up the Network Capture 5 software on the subject computer. Set standby the projector or turn it on. Check IP address of the subject computer is registered in the
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 102
    Chapter 8 Network capture functions Executing the forcing mode The network capture setting of the web page provides a forcing executing command. This command executes the release of authority or ending the communication forcibly. This is useful when the other subject PC keeps an authority all the
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 103
    the participants' data directly in a short time and in real time without taking time to transfer the data to the computer connected to the projector. The image data will not be limited by the computer's application because the data transfer of each computer adopts the screen capturing system. Names
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 104
    registration button, the application window changes to "Moderator mode" window as shown in the lower picture below. Normal mode application window Projector list Status of use Moderator registration Join moderator's Pa ra m e te r group setting Moderator mode application window Status of
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 105
    time, On One-shot capture, On Standby, In Moderator mode, etc. User Indicates the client name (nickname or IP address) used by the projector. Error Indicates the error status during executing the real time capture or one-shot capture. Parameter set up....Sets the parameter of capturing. Moderator
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 106
    application window changes "Normal mode". The column of status changes from "#On Moderating" to "On Standby". When there are multiple projectors to unregister, the application window maintains "Moderator mode" until all the registered moderator's groups are unregistered. ✳ Even after the moderator
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 107
    capture is executed. The time-out period is 10 seconds. ➔ Check the connection of the network cable. Cannot receive the data from the projector when the Start Communication, Terminate Communication, Capture transfer, Start real time capture or Terminate capture is executed. The time-out period is 10
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 108
    Chapter 8 Network capture functions 108
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 109
    9 Chapter 9. Network Viewer functions Network Viewer is a function to display the image data stored in the file servers by the projector through the network. Describes the file converter software File Converter 1, File Converter 2, the program creator software Program Editor, and how to use Network
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 110
    may not be projected. Before using the images with the Network Viewer function, it should be converted to the optimized JPEG data for this projector. [1] How to use the Network Viewer 5 (File Converter 1) The File Converter 1 is a software to convert the images from the JPEG, bitmap or Power Point
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 111
    Menu Tree Menu Sub Menu View Tools Conversion Help Update Preview size Option Convert each file Convert a folder Version information Create the available data Description Updates contents of the preview window Sets size of the preview image, Large, Middle, Small Sets default of the output
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 112
    Chapter 9 Network Viewer functions 2 When converting each file, select a preview image first and then click Convert each file. ✐ To select two or more files at once, press and hold "Shift" key or "Ctrl" key and then click the preview images. When converting all the files in a folder, select a
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 113
    of the FTP server. Conversion mode Resolution Selects output image resolution (VGA to SXGA+) ✐ The image resolution higher than the projector's panel resolution cannot be displayed. Image rotation..........Selects image rotation (0, 90, 180, 270). Conversion Type Fit Converts either width or
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 114
    Chapter 9 Network Viewer functions [2] How to use the Network Viewer 5 (File Converter 2) The File Converter 2 is a kind of the printer driver software to convert to the optimized JPEG data for the projection from the any documents created by the other software such as text editor, spreadsheet or
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 115
    "Program". By specifying the program file with the Network Viewer function, you can display the images in programmed order with the projector . Procedure of making program 1 To start up the Program Editor, click "Network Viewer 5 (Program Editor)" menu from "Start" - "All Programs" - "Network
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 116
    Chapter 9 Network Viewer functions 4 Click New button. 5 Enter a program name and click Add button. 6 The folder selection window appears and select a folder in which the JPEG data are stored and then click Add button to register into the folder lists. Change : Changes the contents of the
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 117
    Creating a program file [Program Editor] Setting up the display order and time of the images In the default setting, the display order of the images is the same as ASCII code order of the file name. To change the display order or to set up the display time, take the following procedures. Display
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 118
    Chapter 9 Network Viewer functions 3 To change the display order, select*1 files and then click UP or DOWN button on the menu bar to move them onto your desired place, or select files and then drag and drop them onto your desired place with mouse. 4 To change the display time*2, select*1 files and
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 119
    menu on the web page, then connect to the FTP server and select the program name which was made at previous section. The projector starts displaying the images along the program. For further information, please see "Using the Network Viewer function" (☞ p.120). ✐ This function is not available
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 120
    to use the Network Viewer function: * Should be possible to use the FTP service with Windows 2000 Professional or XP Professional. * User has a full-access account to 1 Access to the control page on the projector by using the web browser. From the main menu, click Network - Viewer to display
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 121
    2 Setup the setting page [1] of the Visual display. Item Description Host name Enter the host name or IP address of FTP server, yourftp.server etc. Folder Path Use "/"(root directory) normally, or enter the directory name follow the "/" as shown in the below example if you have a specified
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 122
    Chapter 9 Network Viewer functions After clicking Set, the file list or preview list of the selected folder or program is displayed on the window. Decides a image to start auto display with radio button Selects a page The original image is displayed on another window by clicking on the preview
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 123
    The image in the selected folder or program is displayed on the projector's screen. The web browser opens another window and displays the preview button. * When the auto-display stops, it enables you to display the images manually by using [] button. 3. Click End button to end the auto-
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 124
    may have the alert E-mail message. For further information, please see the item "3 Option selection for sending alert mail" (☞ pp.56-58). [2] Control by the projector PC1 PC2 PJ2 Project JPEG images with PJ2. PJ1 JPEG PC3 Prog. JPEG FTP file server PC4 PC5 PC6 Select "Network" input mode
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 125
    -click on the remote control is pressed, automatic displaying stops and the manual displaying mode is set. When the right-click is pressed, automatic displaying folder that the Network Viewer function used last time. The projector cannot specify particular images or file servers itself. ✐ The
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 126
    Chapter 9 Network Viewer functions 126
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 127
    10 Chapter 10. Appendix Use of telnet Web browser setting Firewall setting Troubleshooting Terminology 127
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 128
    *1 installed on your computer. Normally, the telnet application is available on your computer. * The telnet 10000 port is used to control the projector. Control (For example, in case of using the telnet application of the Windows XP Professional.) 1. Select Run... submenu from Start menu on
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 129
    The table below shows the typical command lists for controlling this projector and please consult your local dealer for further information of another on C1D menu display off *1 Further instructions about the telnet application, please see the on-line guide on your computer. *2 The password is
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 130
    is set not to use this JavaScript function, it may not control the projector properly. In that case, the following warning message will be displayed on the top of the page. To enable the JavaScript, please see further instructions on the next page. Flash Player enable The setting page of this
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 131
    Examples: OS/Browsers Windows XP Professional Web browser setting Internet Explorer v.6.0 ActiveScript setting Select Internet Options from Tools menu on the web browser and then select Security tab and click Customize Level... button. On the security setting window, scroll down and find the
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 132
    server address and port correctly in the proxy settings window. For further instruction please consult your network administrator. - Not using proxy server Uncheck the item Use a proxy server. If you connect the projector to the computer directly with UTP cross cable, it must be unchecked. 132
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 133
    Netscape Navigator v.7.0 JavaScript Setting Select Preference from Edit menu on the web browser and then select the item Advanced/ Scripts & Plugins in the Category column. Make sure that the Enable JavaScript for Navigator is checked. Flash Player enable Flash Player Plug-in setting Select About:
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 134
    to which the projector is connected. - Using proxy server When you use an external internet connection from the local area network, select the item Manual proxy configuration. Enter the proxy server address and port number correctly on HTTP Proxy item. For further instruction please consult your
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 135
    as follows; On (recommended) checked Don't allow exceptions unchecked 3 Select Exceptions tab and check the name of Network Capture 5 listed on the Programs and Services. If there is no program name, add the program by clicking Add Program button. 4 Click OK to close setting. 135
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 136
    The LAN cable is connected to the network HUB properly? Wireless LAN Is the WIRELESS indicator on the side panel of the projector lighting? If there are not any problems, confirm the LAN setting again. If the computer supports Wireless LAN, activate the Network Capture 5 and try to connect with
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 137
    selecting Wireless 5 (factory default setting) Troubleshooting Check each item below in the Wireless Setting menu of the projector as follows to the owner's manual for the devices or consult a system administrator of the network. Is the segment where the projector is installed different from
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 138
    , images are not pro- jected on the screen. Make sure Wireless/Wired is selected from the Input source menu of the projector. ■ Cannot be turned on/off with the web browser. Make sure the settings of the projector are correct to use the projector with it. Set the item Standby mode to "Normal" from
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 139
    mode, check which Wireless channel you are using. If the computer using the same channel as yours is existing closely, the networking speed may be reduced or the communication unstable. Change the channel to resolve the problem. The channels of the projector and projector Client computer must be
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 140
    file name and program name. Please check file names and program names (☞p.119). 5. Make sure that your computer is not using the firewall function. The projector may not be able to use the port due to this firewall function. In that case, please turn off this function temporarily. There are also
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 141
    ■ Sometime I have the incorrect images converted by the File Converter 2? Troubleshooting Try to change the mode to "Disable" on "Document options" - "Print optimization" item on the "Network Viewer 5 (Driver) Advance Options" in the Network Viewer 5 (FileConverter 2)
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 142
    Service Set Identifier) ESSID is the ID that is set to computers on Wireless Wireless fidelity and a marketing brand name for IEEE 802.11b High-Rate. Only the products that have passed an inter-operation test interface (no duplication of MAC address). Therefore, MAC address is a unique physical address
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 143
    Terminology 143
  • Sanyo PLC-XU355A | Owner's Manual Network Windows - Page 144
    SO-WIN-KG5AC NETWORK OWNER'S MANUAL FOR WINDOWS SANYO Electric Co., Ltd.
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
Network Set-up and Operation
For Windows
Wired and Wireless Setting
Projector Set-up and Operation
Network Capture
Network Viewer
Moderator Function
Owner’s Manual
This is the manual for the Network function.
Read this manual thoroughly to operate the Network function.
First, read the owner's manual of the projector to understand the basic operation of the
projector and the safety instructions.
The safety instructions in the owner's manuals should be followed strictly.