Sanyo PLC-XU36 Owners Manual

Sanyo PLC-XU36 - XGA LCD Projector Manual

Get Sanyo PLC-XU36 - XGA LCD Projector PDF manuals and user guides View all Sanyo PLC-XU36 manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo PLC-XU36 manual content summary:

  • Sanyo PLC-XU36 | Owners Manual - Page 1
    Multimedia Projector MODEL PLC-XU36 Owner's Manual
  • Sanyo PLC-XU36 | Owners Manual - Page 2
    EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE OWNER'S MANUAL WITH
  • Sanyo PLC-XU36 | Owners Manual - Page 3
    , be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or injury to persons. Upon completion of any service or repairs to this projector, ask the
  • Sanyo PLC-XU36 | Owners Manual - Page 4
    the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Model Numbers Trade Name Responsible party Address Telephone No. : PLC-XU36 : Sanyo : SANYO FISHER COMPANY : 21605 Plummer Street
  • Sanyo PLC-XU36 | Owners Manual - Page 5
    FUNCTION SOUND ADJUSTMENT 19 WARNING TEMP. INDICATOR 41 20 AIR FILTER CARE AND CLEANING 41 20 CLEANING PROJECTION LENS 41 20 TROUBLESHOOTING 42 20 INDICATORS AND PROJECTOR CONDITION 44 20 TECHNICAL SPECIFICATIONS 45 21 CONFIGURATIONS OF TERMINALS 46 21 OPTIONAL PARTS 47 21
  • Sanyo PLC-XU36 | Owners Manual - Page 6
    , 575p, 720p, 1035i or 1080i, can be connected. G S-Video S-Video signal, such as a S-VHS VCR output signal, can be connected. N High Resolution Image This projector provides 1024 x 768 dots resolution for computer input. Resolution from a computer between XGA (1024 x 768) and SXGA (1280 x 1024) is
  • Sanyo PLC-XU36 | Owners Manual - Page 7
    PREPARATION NAME OF EACH PART OF PROJECTOR FRONT EXHAUST VENTS CARRY HANDLE INFRARED REMOTE RECEIVER PROJECTION LENS CAUTION Hot air is exhausted from the exhaust vents. When using or installing the projector, the following precautions should be taken. G Do not put any flammable objects near
  • Sanyo PLC-XU36 | Owners Manual - Page 8
    into any other type of power system. Consult your authorized dealer or service station if you are not sure of the type of power being supplied. Connect the projector with all peripheral equipment before turning the projector on. (Refer to pages 11 ~ 13 for connection.) CAUTION For safety, unplug
  • Sanyo PLC-XU36 | Owners Manual - Page 9
    pull and undo the FEET LOCK LATCHES. Keystone distortion of the projected image can be adjusted by Menu Operation. (Refer to P20 and 36.) CAUTION Tilt the projector within the adjustable range in order not to shorten the life of the lamp. Proper angle should be taken. Refer to page 10. ADJUSTABLE
  • Sanyo PLC-XU36 | Owners Manual - Page 10
    an image. NO DOWNWARD Do not point the projector down to project an image. Do not put the projector on either side to project an image. NO SIDEWAYS MOVING PROJECTOR Use Carry Handle when moving the projector. When moving the projector, replace the Lens Cover and retract the Adjustable Feet to
  • Sanyo PLC-XU36 | Owners Manual - Page 11
    (MONO) jack. VIDEO INPUT JACKS Connect the composite video output from video equipment to VIDEO/Y jack or connect the component video outputs to VIDEO/Y, Pb/Cb and CONTROL PORT CONNECTOR When controlling the computer with Remote Control of this projector, connect the mouse port of your personal
  • Sanyo PLC-XU36 | Owners Manual - Page 12
    computer or Macintosh computer (VGA / SVGA / XGA / SXGA) Desktop type Laptop type 12 COMPUTER IN 1 VIDEO DVI - I R - AUDIO IN - L (MONO) Y - Pb / Cb - Pr / Cr S - VIDEO AUDIO IN TION MODE that you want to use before you turn on projector and OFF computer. ON DIP 123456 1 2 3 4 56
  • Sanyo PLC-XU36 | Owners Manual - Page 13
    for connection (✽ = Cable is not supplied with this projector.) • Video Cable (RCA x 1 or RCA x 3) ✽ • Scart-VGA Cable ✽ • S-VIDEO Cable ✽ • Audio Cable (RCA x 2) ✽ Video Source (example) Video Cassette Recorder Video Disc Player Component video output equipment. (such as DVD player or high
  • Sanyo PLC-XU36 | Owners Manual - Page 14
    VOLUME- SELECT VOLUME+ MENU KEYSTONE POWER ON-OFF BUTTON Used to turn the projector on or off. (P19) AUTO PC ADJ. BUTTON Use to operate AUTO ) LASER P-TIMER COMPUTER ZOOM VIDEO FOCUS FOCUS BUTTON Used to adjust focus. (P20) LASER POINTER FUNCTION This Remote Control emits a laser beam
  • Sanyo PLC-XU36 | Owners Manual - Page 15
    + MENU KEYSTONE LASER P-TIMER COMPUTER ZOOM VIDEO FOCUS NO SHOW BUTTON Used to turn projector. 16.4' (5 m) 60° 60° 16.4' (5 m) REMOTE CONTROL BATTERIES INSTALLATION 1 Remove the battery compartment lid. Press lid downward and slide it. 2 Slide the batteries into compartment. 3 Replace
  • Sanyo PLC-XU36 | Owners Manual - Page 16
    BUTTONS (TOP CONTROLS) and INDICATORS on its top. WARNING TEMP. INDICATOR Flashes red when the internal projector temperature is too high. (P41) LAMP REPLACE INDICATOR Turns yellow when the life of the projection lamp draws to an end. (P38) MENU BUTTON Used to open or close MENU operation. (P17, 18
  • Sanyo PLC-XU36 | Owners Manual - Page 17
    and adjust this projector through the ON- button(s) on the Top Control or on the Remote Control. ✽ Pointer is the icon on the BUTTON Used to select an item. ZOOM VIDEO MENU BUTTON Used to open or close SELECT button to show the ITEM DATA. 4 Adjust the ITEM DATA by pressing the POINT RIGHT / LEFT
  • Sanyo PLC-XU36 | Owners Manual - Page 18
    Press the MENU BUTTON while connecting to PC input source. GUIDE WINDOW Shows the selected item of the ONSCREEN MENU. PC to change settings of the projector or reset the Lamp Replace Counter. (Refer to P36, 37) INPUT MENU Used to select input source either Computer or Video. (Refer to P22) PC
  • Sanyo PLC-XU36 | Owners Manual - Page 19
    seconds. Lamp mode *Refer to page 37 for the Lamp mode. TURNING OFF PROJECTOR 1 Press the POWER ON-OFF button on the Top Control or on the Remote Control management" function is ON, the projector detects signal interruption and turns off the Projection Lamp automatically. Refer to "Power management
  • Sanyo PLC-XU36 | Owners Manual - Page 20
    UP/DOWN button(s) . Focus The message disappears after 4 seconds. KEYSTONE ADJUSTMENT If the projected picture has keystone distortion, correct the image with KEYSTONE adjustment. 1 Press the KEYSTONE button on the Remote Control or select Keystone in the SETTING Menu. (Refer to page 36.) The
  • Sanyo PLC-XU36 | Owners Manual - Page 21
    The message disappears after 4 seconds. P-TIMER FUNCTION Press the P-TIMER button on the Remote Control. The timer display "00 : 00" appears on the screen and the timer and (-) button to decrease. Mute Press the MUTE button on the Remote Control to cut off sound. To restore sound to its previous
  • Sanyo PLC-XU36 | Owners Manual - Page 22
    on the Top Control or press the COMPUTER button on the Remote Control. If the projector cannot reproduce proper image, select correct input source through MENU OPERATION (see below). INPUT button Computer 1 Computer 2 ✽ Video COMPUTER button Computer 1 NOTE G Computer 2 can be selected when the
  • Sanyo PLC-XU36 | Owners Manual - Page 23
    input from the connected computer. Make sure the connection of the computer and the projector is set correctly. (Refer to the TROUBLESHOOTING on page 42.) Mode 1 User preset adjustment in MANUAL PC ADJUSTMENT. Adjustment data can be stored in the Mode 1 - 5. SVGA 1 Computer systems provided in the
  • Sanyo PLC-XU36 | Owners Manual - Page 24
    D-XGA 1024 x 768 H-Freq. (kHz) 31.47 37.879 43.363 V-Freq. (Hz) 59.94 60.32 60.00 ON-SCREEN DISPLAY RESOLUTION D-SXGA 1 1280 x 1024 D-SXGA 2 1280 x 1024 D-SXGA 3 1280 x 1024 H-Freq. (kHz) 63.98 60.276 31.65 V-Freq. (Hz) 60.02 58.069 29.80 NOTE : The projector may not project
  • Sanyo PLC-XU36 | Owners Manual - Page 25
    button on the Remote Control. Store adjustment parameters. Adjustment parameters from Auto PC Adjustment can be memorized in this projector. Once parameters function. When the image is not provided properly through this function, manual adjustments are required. (Refer to page 26, 27.) G The
  • Sanyo PLC-XU36 | Owners Manual - Page 26
    reproduce a proper image and the image may be recognized as a flickering picture, a non-synchronized picture, a non-centered picture or a skewed picture. This projector has Manual PC Adjustment to enable you to precisely adjust several parameters to match with those special signal formats. This
  • Sanyo PLC-XU36 | Owners Manual - Page 27
    projector. Select the resolution at the Display area dialog box. Display area H Adjustment of the horizontal area displayed by this projector to adjust value and then press the SELECT button. To store adjustment data. This Mode has parameters being stored. Mode free To clear adjustment parameters
  • Sanyo PLC-XU36 | Owners Manual - Page 28
    3, and Image 4 by pressing the IMAGE button on the Top Control or on the Remote Control. Standard Normal picture level preset on this projector. Real Picture level with improved halftone for graphics. IMAGE 1~4 User preset picture adjustment in the IMAGE ADJUST Menu (P29, 30). IMAGE button Standard
  • Sanyo PLC-XU36 | Owners Manual - Page 29
    COMPUTER INPUT IMAGE LEVEL ADJUSTMENT 1 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the IMAGE ADJUST Menu icon. 2 Press the POINT DOWN button to move the red frame pointer to the item that you want to adjust, and
  • Sanyo PLC-XU36 | Owners Manual - Page 30
    in the PC SYSTEM Menu (P23). G This projector cannot display any resolution higher than 1280 X 1024. If your computer's screen resolution is higher than 1280 X 1024, reset the resolution to the lower before connecting projector. G The image data in other than XGA (1024 x 768) is modified to fit the
  • Sanyo PLC-XU36 | Owners Manual - Page 31
    the INPUT button on the Top Control or on the Remote Control. If the projector cannot reproduce proper video source, select correct input source through MENU OPERATION (see below). RGB Scart Input To select RGB Scart 21-Pin video input through the COMPUTER IN 2 / MONITOR OUT terminal, see "COMPUTER
  • Sanyo PLC-XU36 | Owners Manual - Page 32
    to move the red arrow pointer to the system that you want to select and then press the SELECT button. VIDEO JACK OR S-VIDEO JACK Auto The projector automatically detects incoming Video system, and adjusts itself to optimize its performance. PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N If the
  • Sanyo PLC-XU36 | Owners Manual - Page 33
    Image 4 by pressing the IMAGE button on the Top Control or on the Remote Control. Standard Normal picture level preset on this projector. Cinema Picture level adjusted for the picture with fine tone. IMAGE 1~4 User preset picture adjustment in the IMAGE ADJUST Menu (P34, 35). IMAGE button Standard
  • Sanyo PLC-XU36 | Owners Manual - Page 34
    VIDEO INPUT IMAGE LEVEL ADJUSTMENT 1 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/ function is "ON", it automatically produces more vivid image according to image condition. NOTE G Tint cannot be adjusted when the video system is PAL, SECAM, PAL-M or PAL-N. 34
  • Sanyo PLC-XU36 | Owners Manual - Page 35
    VIDEO INPUT 3 Store To store the adjustment data, move the red frame pointer to the Store to the image icon to be set and then press the SELECT button. PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display the desirable image size. 1
  • Sanyo PLC-XU36 | Owners Manual - Page 36
    stores the keystone adjustment data even if the AC Power Cord is disconnected. Reset ····resets the keystone adjustment data when the AC Power left / right reversed. This function is used to project the image from a ceiling mounting the projector. Rear function Rear When this function is "On,"
  • Sanyo PLC-XU36 | Owners Manual - Page 37
    set the DIP switches 1-3 inside the battery compartment box of the Remote Control. (Refer to page 14.) Lamp counter reset This function is used to reset the Lamp Replace Counter. When replacing the Projection Lamp, reset the Lamp Replace Counter by using this function. Refer to page 38 for operation
  • Sanyo PLC-XU36 | Owners Manual - Page 38
    ASSEMBLY SCREW HANDLE ORDER REPLACEMENT LAMP Replacement Lamp can be ordered through your dealer. When ordering a Projection Lamp, give the following information to the dealer. G Model No. of your projector : G Replacement Lamp Type No. : PLC-XU36 POA-LMP53 (Service Parts No. 610 303 5826
  • Sanyo PLC-XU36 | Owners Manual - Page 39
    should be replaced, i.e., if the LAMP REPLACE INDICATOR lights up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down. ( Follow carefully the instructions in the LAMP REPLACEMENT section of this manual. ) Continuous use of the lamp with the LAMP REPLACE INDICATOR lighted
  • Sanyo PLC-XU36 | Owners Manual - Page 40
    PC mouse pointer is displayed on a projected screen. INSTALLATION To use the Remote Control as Wireless Mouse for a Personal connect Serial Port of your computer to Control Port of the projector with Control Cable for Serial Port (not supplied). OPERATING WIRELESS COMPUTER 2 VIDEO FOCUS LENS
  • Sanyo PLC-XU36 | Owners Manual - Page 41
    . Contact service personnel from an authorized dealer or a service station. WATRENMIPN Replace the Air Filter properly. Make sure that the Air Filter is fully inserted. CAUTION Do not operate the projector with the Air Filter removed. Dust may accumulate on the LCD Panel and the Projection
  • Sanyo PLC-XU36 | Owners Manual - Page 42
    APPENDIX TROUBLESHOOTING Before calling your dealer or service center for assistance, check the items below once again. G Make sure you have connected the projector to peripheral equipment as described properly in the section "CONNECTING PROJECTOR" on pages 11 ~ 13. G Verify that all computer, video
  • Sanyo PLC-XU36 | Owners Manual - Page 43
    . WARNING : High voltages are used to operate this projector. Do not attempt to open the cabinet. If the problem still persists after following all operating instructions, contact the sales dealer where you purchased the projector or the service center. Give the model number and explain about the
  • Sanyo PLC-XU36 | Owners Manual - Page 44
    - ter for service and checkup. Do not leave the projector on. It may cause electric shock or a fire hazard. ✽ The projector is in the Power management mode. • • • on • • • flashing • • • dim • • • off ✽ When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights
  • Sanyo PLC-XU36 | Owners Manual - Page 45
    Projector Type Dimensions (W x H x D) Net Weight LCD Panel System Panel Resolution Number of Pixels Color System High Definition TV Signal Scanning Frequency Projection Image size (Diagonal) Projection Lens Throw Distance Projection Lamp Video ±20nm) Owner's Manual AC Power Cord Remote Control and
  • Sanyo PLC-XU36 | Owners Manual - Page 46
    10 9 8 7 6 15 14 13 12 11 1 Red Input 9 +5V Power 2 Green Input 10 Ground (Vert.sync.) 3 Blue Input 11 Sense 0 4 Sense 2 12 DDC Data 5 Ground (Horiz.sync.) 13 Horiz. sync. 6 Ground (Red) 14 Vert. sync. 7 Ground (Green) 15 DDC Clock 8 Ground (Blue) DVI-I TERMINAL (DIGITAL/ANALOG) Pin
  • Sanyo PLC-XU36 | Owners Manual - Page 47
    GND GND GND 5 ----- RTS / CTS ----- 6 ----- T X D ----- 7 GND GND ----- 8 ----- GND GND USB CONNECTOR (Series B) Pin Configuration 21 34 1 Vcc 2 - Data 3 + Data 4 Ground APPENDIX OPTIONAL PARTS The parts listed below are optionally supplied. When ordering those parts, give the name
  • Sanyo PLC-XU36 | Owners Manual - Page 48
    Printed in Japan Part No. 610 305 7101 (1AA6P1P3906-- MA3AA) SANYO Electric Co., Ltd.
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
Multimedia Projector
MODEL
PLC-XU36
Owner’s Manual