Sanyo PLC-XU51 Owners Manual

Sanyo PLC-XU51 Manual

Get Sanyo PLC-XU51 PDF manuals and user guides View all Sanyo PLC-XU51 manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo PLC-XU51 manual content summary:

  • Sanyo PLC-XU51 | Owners Manual - Page 1
    Multimedia Projector MODEL PLC-XU56 PLC-XU51 PLC-SU51 Owner's Manual
  • Sanyo PLC-XU51 | Owners Manual - Page 2
    projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. ◆ Compact Design This projector Function The PIN code lock function prevents others except users from using the projector. (See page 20 and 47.) ◆ Digital Zoom
  • Sanyo PLC-XU51 | Owners Manual - Page 3
    Cover 50 Cleaning the Projection Lens 51 Cleaning the Projector Cabinet 51 Lamp Replacement 52 Lamp Replace Counter 53 Appendix 54 Troubleshooting 54 Menu Tree 56 Indicators and Projector Condition 58 Compatible Computer Specifications 59 Technical Specifications 60 Optional
  • Sanyo PLC-XU51 | Owners Manual - Page 4
    problem still persists, contact the dealer where you purchased the projector or the service center. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING
  • Sanyo PLC-XU51 | Owners Manual - Page 5
    Follow all warnings and instructions marked on the projector. For added protection to the projector during a lightning storm, projector exhibits a distinct change in performance-this indicates a need for service. When replacement parts are required, be sure the service technician has used replacement
  • Sanyo PLC-XU51 | Owners Manual - Page 6
    Projector When moving the projector, replace the Lens Cover and retract Adjustable Feet to prevent damage to the lens and cabinet. When the projector transport a projector through a courier or transport services with this bag, otherwise the projector can be damaged. When handling a projector, do
  • Sanyo PLC-XU51 | Owners Manual - Page 7
    unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipme Model Numbers Trade Name Responsible party Address Telephone No. : PLC-XU56, PLC-XU51, PLC-SU51 : Sanyo : SANYO FISHER COMPANY : 21605 Plummer
  • Sanyo PLC-XU51 | Owners Manual - Page 8
    !6 i o !0 Bottom !2 !3 !1 !4 q Power Cord Connector w Infrared Remote Receiver e Zoom Lever r Focus Ring t Projection Lens y Lens Cover (See and Indicators o Air Intake Vent !0 Terminals and Connectors !1 Speaker !2 Lamp Cover !3 Air Intake Vent (back and bottom) !4 Air Filter !5 Adjustable
  • Sanyo PLC-XU51 | Owners Manual - Page 9
    IN COMPUTER/ COMPONENT Connect the audio output (stereo) from a computer or video equipment connected to q or o to this jack. (p 17, 19) w SERVICE PORT This jack is used to service this projector. e AUDIO IN Connect the audio output from video equipment connected to r or i to this jack. (When the
  • Sanyo PLC-XU51 | Owners Manual - Page 10
    detects abnormal condition. This also blinks red when the internal temperature of the projector exceeds the operating range. (p49) u LAMP REPLACE indicator Turns yellow when the life of the projection lamp draws to an end. (p52) i POINT (ed7 8 ) button Selects an item or adjusts value in the
  • Sanyo PLC-XU51 | Owners Manual - Page 11
    laser light window or a signal is being sent from the remote control to the projector. e AUTO PC button Operates the Auto PC adjustment function. COMPUTER 2). (p27, 36) @1 VIDEO button Selects input source (VIDEO). (p35) @2 RESET/ON/ALL-OFF switch When using the remote control, set this switch to "
  • Sanyo PLC-XU51 | Owners Manual - Page 12
    so that the Pointer function will be available. (The Laser pointer has switched to the Pointer.) 2 Press the LASER button on the remote control toward the projector. Spotlight or Pointer is displayed on the screen with the LASER button lighting green. Then move the Spotlight or Pointer with the
  • Sanyo PLC-XU51 | Owners Manual - Page 13
    R-CLICK button Acts as right click while the projector and a computer are connected with a USB cable. Operating Range Point the remote control toward the projector (Infrared Remote Receiver) whenever pressing any button. Maximum operating range for the remote control is about 16.4' (5m) and 60° in
  • Sanyo PLC-XU51 | Owners Manual - Page 14
    Part Names and Functions Remote Control Code This projector has eight different remote control codes (Code 1-Code 8). Switching remote control codes prevents remote control interference when operating several projectors or video equipment at the same time. Change the remote control code for the
  • Sanyo PLC-XU51 | Owners Manual - Page 15
    tilt. 3 To retract the adjustable feet, lift the front of the projector and pull and undo the feet lock latches. Keystone distortion of the projected image can be adjusted automatically with Auto Setup function or manually with the remote control or the menu operation. (p24, 25, and 42) Adjustable
  • Sanyo PLC-XU51 | Owners Manual - Page 16
    plug into any other type of power system. Consult your authorized dealer or service station if you are not sure of the type of power being supplied. Connect the projector with all peripheral equipment before turning the projector on. (See page 17-19 for connection.) CAUTION For safety, unplug AC
  • Sanyo PLC-XU51 | Owners Manual - Page 17
    • USB Cable • Audio Cables (Mini Plug: stereo Not supplied with this projector.) Monitor Input Audio Output Audio cable (stereo) ✽ USB port USB cable Monitor IN 1 DVI - I AUDIO IN R L (MONO) VIDEO USB SERVICE PORT S-VIDEO COMPUTER / COMPONENT RESET MCI COMPUTER IN 2 / COMPONENT IN
  • Sanyo PLC-XU51 | Owners Manual - Page 18
    supplied with this projector.) S-Video Output Composite Video and Audio Output (R) (L) (Video) S-Video cable ✽ Video and audio cable✽ External Audio Equipment Audio Input S-VIDEO (R) (L) AUDIO IN VIDEO COMPUTER IN 1 DVI - I AUDIO IN R L (MONO) VIDEO USB SERVICE PORT S-VIDEO COMPUTER
  • Sanyo PLC-XU51 | Owners Manual - Page 19
    VGA Cable ✽ • Component-VGA Cable ✽ (✽ = Not supplied with this projector.) Installation RGB Scart 21-pin Output Component Video Output (Y, Pb/Cb, Pr/Cr) Audio Output Scart-VGA cable ✽ AUDIO IN R L (MONO) VIDEO USB SERVICE PORT S-VIDEO COMPUTER / / CCOOMMPPOONNEENNTT RREESSEETT MCI
  • Sanyo PLC-XU51 | Owners Manual - Page 20
    Lamp mode status icon (see page 45) appear on the screen. If the projector is locked with a PIN code, PIN code Input Dialog Box will appear. Enter the PIN code as instructed of this manual, and keep it at hand. Should the PIN code be missing or forgotten, consult your dealer or service center. PIN
  • Sanyo PLC-XU51 | Owners Manual - Page 21
    on the remote control, and a message "Power off?" appears on the screen. 2 Press the POWER ON-OFF button again to turn off the projector. The POWER INDICATOR LIGHTS RED. OTHERWISE IT WILL RESULT IN SHORTENING LAMP LIFE. ✔Note: • The projector cannot be turned on during the cooling period with the
  • Sanyo PLC-XU51 | Owners Manual - Page 22
    Operation How to Operate the On-Screen Menu The projector can be adjusted or set via the On-Screen exit this menu. Remote Control POINT button SELECT button MENU button Top Control ON - OFF INPUT POWER WARNING VOLUME - VOLUME + AUTO SET UP MENU SELECT LAMP REPLACE POINT button (outer
  • Sanyo PLC-XU51 | Owners Manual - Page 23
    Basic Operation Menu Bar For computer source Guide Window Shows the selected Menu of the OnScreen Menu Used to change settings of the projector or reset lamp replace counter. (p42-48) Basic Operation Input Menu Used to select input source either Computer or Video. (p27) PC Adjust Menu Used to
  • Sanyo PLC-XU51 | Owners Manual - Page 24
    is provided to automatically correct Keystone distortion according to the projector's tilt and adjust the computer display parameters (Fine sync, button, adjust manually by pressing the KEYSTONE button on the remote control or selecting Keystone in the Setting menu. (p25, 42) Remote Control AUTO
  • Sanyo PLC-XU51 | Owners Manual - Page 25
    the AUTO SET on the remote control, correct the image manually as follows: 1 Press the KEYSTONE button on the remote control or select Keystone in or press any other button. When a projected image is captured and set as "User" in the Logo item in the Setting Menu (p44), the screen changes each time
  • Sanyo PLC-XU51 | Owners Manual - Page 26
    the screen for a few seconds. (+) button to turn up the volume and (-) button to turn down the volume. Mute Press the MUTE button on the remote control to cut off sound. To restore sound to its previous level, press the MUTE button again or press the VOLUME (+/-) button. Menu Operation 1 Press
  • Sanyo PLC-XU51 | Owners Manual - Page 27
    or press the COMPUTER button on the remote control. Before using these buttons, the input source compatible with HDCP is coming from video equipment through the DVI terminal, select RGB (AV LLC. Should the specification be changed, this projector may not display the digital content protected by
  • Sanyo PLC-XU51 | Owners Manual - Page 28
    Menu The Auto PC Adjustment function operates to adjust the projector. ----- There is no signal input from computer. Check the connection of your computer and the projector. (See " Troubleshooting" p54) Mode 1 User preset system manually adjusted in PC Adjust menu. Adjustment data can be stored
  • Sanyo PLC-XU51 | Owners Manual - Page 29
    on the remote control unit. To store adjustment parameters Adjustment parameters from Auto PC Adjustment can be memorized in this projector. Once Adjustment function. When the image is not provided properly with this operation, manual adjustments are required. (p30, 31) • The Auto PC Adjust cannot
  • Sanyo PLC-XU51 | Owners Manual - Page 30
    PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has 5 independent memory areas to memorize those parameters manually adjusted. It allows you to recall the setting for a specific computer. 1 Press the MENU button and the On-Screen Menu
  • Sanyo PLC-XU51 | Owners Manual - Page 31
    . Press the Point 7 8 button to decrease/increase value and then press the SELECT button. Display area V Adjusts the vertical area displayed by this projector. Press the Point 7 8 button to decrease/increase value and then press the SELECT button. Full screen With this function on, SXGA image is
  • Sanyo PLC-XU51 | Owners Manual - Page 32
    the remote control. Dynamic Picture level suitable for viewing picture in a bright room. Standard Normal picture level preset on this projector. green colored board, not truly effective on a black colored board. Image 1~4 User preset image in the Image Adjust Menu (p33). Menu Operation 1 Press the
  • Sanyo PLC-XU51 | Owners Manual - Page 33
    8 button to obtain better balance of contrast. (From 0 to 15.) Reset Resets all adjustment to their previous levels. Store To store the image data adjusted manually, move the red frame pointer to the Store icon and press the SELECT button. The Image Level Menu will appear. Move the red frame pointer
  • Sanyo PLC-XU51 | Owners Manual - Page 34
    PLC-XU56/PLC-XU51, 800 x 600 for PLC-SU51), this projector enters "Digital zoom +" mode automatically. Wide Provides image to fit wide video A projected image can be also expanded by pressing the D.ZOOM ▲ button on the remote control. ✔Note: • This Screen Menu cannot be operated when "720p(HDTV)",
  • Sanyo PLC-XU51 | Owners Manual - Page 35
    projector selects connection in the following order: 1st S-Video 2nd Video The S-VIDEO jack has priority over the VIDEO jack under the condition of connecting both the S-VIDEO jack and the VIDEO jack. Video When video input signal is connected to the VIDEO jack, select Video. S-Video When video
  • Sanyo PLC-XU51 | Owners Manual - Page 36
    on the top control or press the COMPUTER button on the remote control. Before using these buttons, correct input source should be selected through menu operation as described below. INPUT button Computer 1 Computer 2 ✳ Video COMPUTER button Computer 1 Computer 2 ✳ ✳ See Note on the bottom of this
  • Sanyo PLC-XU51 | Owners Manual - Page 37
    to select and then press the SELECT button. Video Input Video or S-Video Auto The projector automatically detects incoming video system, and adjusts itself to optimize its performance. When Video System is PAL-M or PAL-N, select system manually. PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N If
  • Sanyo PLC-XU51 | Owners Manual - Page 38
    the remote control. Dynamic Picture level suitable for viewing picture in a bright room. Standard Normal picture level preset on this projector. Cinema projected on a Blackboard (Green). See above for further description. Image1~4 User preset image in the Image Adjust Menu (p39, 40). Image Select
  • Sanyo PLC-XU51 | Owners Manual - Page 39
    and the Point 8 button to sharpen the image. (From 0 to 15.) Gamma Press the Point 7 8 button to obtain better balance of contrast. (From 0 to 15.) Video Input Image Adjust Menu Image Adjust Menu icon Move the red frame pointer to the item to be selected and then press the SELECT button
  • Sanyo PLC-XU51 | Owners Manual - Page 40
    "L1" for an active picture. L2 . . . . .Select "L2" for a still picture. Film This function is effective on 3:2 pulldown video sources. With this function On, the projector reproduces pictures faithful to the original film quality. Reset Resets all adjustment to their previous figure. Store To store
  • Sanyo PLC-XU51 | Owners Manual - Page 41
    Video Input Screen Size Adjustment This projector has a picture screen resize function, which enables the function that you want to select and then press the SELECT button. Normal Provides image at a normal video aspect ratio of 4 : 3. Wide Provides image at a wide screen ratio of 16 : 9. Screen
  • Sanyo PLC-XU51 | Owners Manual - Page 42
    disables Auto PC Adjustment. Auto Keystone Auto always works and corrects keystone distortion according to the projector's tilt. Manual . . . .works only when pressing the AUTO SET button on the remote control or the AUTO SETUP button on the top control. Off disables Auto Keystone. ✔Note: • Auto
  • Sanyo PLC-XU51 | Owners Manual - Page 43
    Setting Blue back When this function is "On," the projector produces a blue image while input signal is not no longer change the Logo PIN code setting. For details on PIN code setting, refer to relevant instructions of the PIN Code Lock function on page 47. Logo PIN Code Lock Logo PIN Code Lock
  • Sanyo PLC-XU51 | Owners Manual - Page 44
    the Logo function and set it to "User". Then the captured image can be displayed when turning on the projector next time or pressing the NO SHOW from a computer can be captured up to XGA(1024 x 768). A signal from video equipment can be captured except for 720p, 1035i, and 1080i. • When capturing
  • Sanyo PLC-XU51 | Owners Manual - Page 45
    or any button on the top control or remote control unit is pressed. Shutdown . . .When the lamp has been fully cooled down, the power will be turned off. Off The Power Management function is canceled. On start When this function is "On," the projector is automatically turned on just by connecting
  • Sanyo PLC-XU51 | Owners Manual - Page 46
    seven codes (Code 2 to Code 8). This switching function prevents remote control interference when operating several projectors or video equipment at the same time. For example operating the projector in "Code 7", both the projector and the remote control must be switched to "Code 7". To change the
  • Sanyo PLC-XU51 | Owners Manual - Page 47
    PIN CODE NO. MEMO ON PAGE 63, AND KEEP IT SECURELY. SHOULD THE PIN CODE BE LOST OR FORGOTTEN, THE PROJECTOR CAN NO LONGER BE OPERATED. PIN code lock When the projector is locked with the PIN code, the PIN code lock mark appears on the menu bar. Enter a PIN code Pointer
  • Sanyo PLC-XU51 | Owners Manual - Page 48
    . In this mode, cooling time after turning off the projector will be extended longer than in the normal mode. Lamp counter reset This function is used to reset the lamp replace counter. When replacing the projection lamp, reset the lamp replace counter by using this function. See page 53 for
  • Sanyo PLC-XU51 | Owners Manual - Page 49
    , disconnect the AC power cord and contact the service station for check and repair. CAUTION DO NOT LEAVE THE PROJECTOR WITH THE AC POWER CORD CONNECTED UNDER THE ABNORMAL CONDITION. IT MAY RESULT IN FIRE OR ELECTRIC SHOCK. TOP CONTROL WARNING LECT LAMP REPLACE VOLUME + WARNING lights red 49
  • Sanyo PLC-XU51 | Owners Manual - Page 50
    symptoms above are noticed, contact your authorized dealer or service station for proper cleaning. Air Filter Pull up and remove. Attaching the Lens Cover When moving this projector or while not using it over an extended period of time, replace the lens cover. 1 Pass the string through a hole of
  • Sanyo PLC-XU51 | Owners Manual - Page 51
    of cleaner. Abrasive cleaners, solvents, or other harsh chemicals might scratch the surface. 3 When the projector is not in use, replace the lens cover. Cleaning the Projector Cabinet Follow these steps to clean the projector cabinet. 1 Disconnect the AC power cord before cleaning. 2 Softly wipe the
  • Sanyo PLC-XU51 | Owners Manual - Page 52
    dealer. When ordering a projection lamp, give the following information to the dealer. ● Model No. of your projector : ● Replacement Lamp Type No. : PLC-XU56/ PLC-XU51/ PLC-SU51 POA-LMP55 (for PLC-XU51) (Service Parts No. 610 309 2706) POA-LMP65 (for PLC-XU56/PLC-SU51) (Service Parts No. 610 307
  • Sanyo PLC-XU51 | Owners Manual - Page 53
    should be replaced, i.e., if the LAMP REPLACE indicator lights up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down. ( Follow carefully the instructions in the Lamp Replacement section of this manual. ) Continuous use of the lamp with the LAMP REPLACE indicator lighted
  • Sanyo PLC-XU51 | Owners Manual - Page 54
    setting for monitor output when connecting to a projector. See your computer's instruction manual for the setting. - It takes about 20 seconds to display an image after turning on the projector. - See if the selected system is corresponding with your computer or video equipment. (See page 28 and 37
  • Sanyo PLC-XU51 | Owners Manual - Page 55
    See page 17.) WARNING : High voltages are used to operate this projector. Do not attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Give the model number and explain about the
  • Sanyo PLC-XU51 | Owners Manual - Page 56
    - H Display area - V Full screen Reset Mode free Store Quit RGB( Analog ) RGB( PC Digital ) RGB( AV HDCP ) RGB Component RGB( Scart ) Auto Video S-Video 0 - 63 On / Off Go to System (1) N/A N/A Go to System (1) Go to System (2) N/A Go to System (3) Go to System (3) Go to System (3) ✽N/A - - - not
  • Sanyo PLC-XU51 | Owners Manual - Page 57
    Video start Lamp mode Pointer Remote control USB Key lock PIN code lock Fan Lamp User Default Yes/No On / Off On / Off Computer 2 Monitor out Eco / Normal Off Ready Shut down Timer(1-30 Min) Quit On / Off Normal Auto Eco Spotlight Pointer Quit Code 1 - 8 Quit Mouse / Projector Off Projector Remote
  • Sanyo PLC-XU51 | Owners Manual - Page 58
    or the service center for service and checkup. Do not leave the projector on. It may cause electric shock or a fire hazard. • • • lights green. • • • blinks green. • • • lights red. • • • blinks red. • • • off ✽ When the life of the projection lamp draws to an end, the LAMP REPLACE indicator
  • Sanyo PLC-XU51 | Owners Manual - Page 59
    Appendix Appendix Compatible Computer Specifications PLC-XU56/PLC-XU51 can basically accept the signal from all computers with the V, H-Frequency mentioned below and less than 140 MHz of Dot Clock. PLC-SU51 can basically accept the signal from all computers with the V, H-Frequency mentioned below
  • Sanyo PLC-XU51 | Owners Manual - Page 60
    Projector 11.73" x 2.8" x 8.58" (298mm x 71mm x 218mm) (Not including adjustable feet) 6.2 lbs (2.8kgs) 0˚ to 11.8˚ Panel Resolution LCD Panel System Panel Resolution Number of Pixels PLC-XU56/XU51 0.8" TFT Active Matrix type, 3 panels 1,024 x 768 dots 2,359,296 (1,024 x 768 x 3 panels) PLC-SU51
  • Sanyo PLC-XU51 | Owners Manual - Page 61
    Manual AC Power Cord Remote Control and Batteries DVI-VGA Cable USB Cable Lens Cover with String and Screw Soft Carrying Bag PIN Code Label ● The specifications are subject to change without notice. ● LCD is used for RGB Scart 21-Pin Video output of video equipment.) Multi Card Imager Box : POA
  • Sanyo PLC-XU51 | Owners Manual - Page 62
    (DIGITAL/ANALOG) Terminal : DVI-I C1 C2 12345678 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 C3 C4 C5 SERVICE PORT CONNECTOR Terminal : Mini DIN 8-PIN 876 5 43 21 C1 Analog Red Input C2 Analog Green Input C3 Analog Blue Input C4 Analog Horiz. sync
  • Sanyo PLC-XU51 | Owners Manual - Page 63
    Number Memo Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. PIN Code Lock No. Factory default set No: 1 2 3 4* Logo PIN Code Lock No. Factory default set
  • Sanyo PLC-XU51 | Owners Manual - Page 64
    Printed in Japan Part No. 610 314 6645 (1AA6P1P4532-- MT7A) SANYO Electric Co., Ltd.
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
Multimedia Projector
MODEL
PLC-XU56
PLC-XU51
PLC-SU51
Owner’s Manual