Sanyo PLC-XU56 Instruction Manual, PLC-XU56

Sanyo PLC-XU56 Manual

Get Sanyo PLC-XU56 PDF manuals and user guides View all Sanyo PLC-XU56 manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo PLC-XU56 manual content summary:

  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 1
    Multimedia Projector MODEL PLC-XU58 PLC-XU56 PLC-XU51 PLC-SU51 Owner's Manual
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 2
    crystal display (LCD) technology. ◆ Compact Design This projector is designed compact lamp life. (See page 45.) ◆ Switchable Interface Terminal The projector provides a switchable interface terminal. You can use the terminal as computer input or monitor output conveniently. (See page 44.) ◆ User
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 3
    Lens 51 Cleaning the Projector Cabinet 51 Lamp Replacement 52 Lamp Replace Counter 53 Appendix 54 Troubleshooting 54 Menu Tree 56 Indicators and Projector Condition 58 Compatible Computer Specifications 59 Technical Specifications 60 Optional Parts 61 Configurations of
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 4
    problem still persists, contact the dealer where you purchased the projector or the service center. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 5
    all warnings and instructions marked on the projector. For added protection to the projector during a lightning storm projector exhibits a distinct change in performance-this indicates a need for service. When replacement parts are required, be sure the service technician has used replacement parts
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 6
    fans are provided to cool down the projector. This projector monitors internal temperature and control the running speed of the cooling fans. Installing the Projector in Proper Position Install the projector properly. Improper Installation may reduce the lamp life and cause a fire hazard. 20˚ Do
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 7
    otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Model Numbers Trade Name Responsible party Address Telephone No. : PLC-XU58, PLC-XU56, PLC-XU51, PLC-SU51 : Sanyo : SANYO FISHER COMPANY : 21605
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 8
    Bottom !2 !3 !1 !4 q Power Cord Connector w Infrared Remote Receiver e Zoom Lever r Focus Ring t Projection Lens y Lens Cover (See page 50 for attaching.) u Air Intake Vent i Top Controls and Indicators o Air Intake Vent !0 Terminals and Connectors !1 Speaker !2 Lamp Cover !3 Air Intake Vent (back
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 9
    SERVICE PORT S-VIDEO COMPUTER / COMPONENT RESET MCI COMPUTER IN 2 / COMPONENT IN / MONITOR OUT AUDIO IN AUDIO OUT (VARIABLE) Do not press this button. This button is used for optional accessories w SERVICE PORT This jack is used to service this projector. e with the remote control, connect
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 10
    Part Names and Functions Top Control qw er t y ON - OFF INPUT POWER WARNING VOLUME - VOLUME + AUTO SET UP MENU SELECT LAMP REPLACE temperature of the projector exceeds the operating range. (p49, 58) u LAMP REPLACE indicator Turns yellow when the life of the projection lamp draws to an
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 11
    !3 @2 Part Names and Functions q L-CLICK button Acts as left click for wireless mouse operation. (p13) w SIGNAL EMISSION indicator This indicator lights red while the laser beam is being emitted from the laser light window or a signal is being sent from the remote control to the projector. e AUTO
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 12
    remote control. Laser Light Window Pointer Function You can move Spotlight or Pointer of the projector with the remote control to emphasize a part pressing the MENU button for more than 7 seconds or slide the RESET/ON/ALL-OFF switch to "RESET". (p11) NO SHOW button While pressing the MENU button,
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 13
    and Functions Part Names and Functions Wireless Mouse Operation The remote control can be used as a wireless mouse for your computer. Before operating the wireless mouse, connect your computer and the projector with the supplied USB cable. (See page 17 for connection.) When the Pointer function
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 14
    the remote control to moisture, or heat. ● Do not drop the remote control. ● If a battery has leaked on remote control, carefully wipe case clean and install new batteries. ● Risk of explosion if battery is replaced by an incorrect type. ● Dispose of used batteries according to the instructions. 14
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 15
    tilt. 3 To retract the adjustable feet, lift the front of the projector and pull and undo the feet lock latches. Keystone distortion of the projected image can be adjusted automatically with Auto Setup function or manually with the remote control or the menu operation. (p24, 25, and 42) Adjustable
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 16
    plug into any other type of power system. Consult your authorized dealer or service station if you are not sure of the type of power being supplied. Connect the projector with all peripheral equipment before turning the projector on. (See page 17-19 for connection.) CAUTION For safety, unplug AC
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 17
    this projector.) Monitor Input Audio Output Audio cable (stereo) ✽ USB port USB cable Monitor Output VGA cable ✽ Monitor Output MONITOR OUT COMPUTER IN 1 DVI - I AUDIO IN R L (MONO) VIDEO USB SERVICE PORT S-VIDEO COMPUTER / COMPONENT RESET MCI COMPUTER IN 2 / COMPONENT IN / MONITOR
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 18
    Cable ✽ • Audio Cable (Mini Plug: stereo Not supplied with this projector.) S-Video Output Composite Video and Audio Output (R) (L) (Video) S- R L (MONO) VIDEO USB SERVICE PORT S-VIDEO COMPUTER / / CCOOMMPPOONNEENNTT RESET MCI COMPUTER IN 2 / COMPONENT IN / MONITOR OUT AUDIO IN AUDIO OUT ((
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 19
    MONITOR OUT COMPUTER IN 2/ COMPONENT IN/ MONITOR OUT COMPUTER/ COMPONENT AUDIO IN CCOOMMPPUUTTEERR IINN 11 DDVVII--II AUDIO IN R L (MONO) VIDEO USB SERVICE IN 2/COMPONENT IN/MONITOR OUT terminal as input. • When connecting AUDIO OUT to external audio equipment, the projector's built-in speaker
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 20
    who knows it to operate the projector. Setting PIN code prevents others except the specific users from operating the projector. A PIN code consists of on page 63 of this manual, and keep it at hand. Should the PIN code be missing or forgotten, consult your dealer or service center. PIN code Input
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 21
    or on the remote control, and a message "Power off?" appears on the screen. 2 Press the POWER ON-OFF button again to turn off the projector. The POWER indicator shortening the lamp life. Turn off the projector and give it a rest about an hour in every 24 hours. • This projector monitors internal
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 22
    Operation How to Operate the On-Screen Menu The projector can be adjusted or set via the On-Screen exit this menu. Remote Control POINT button SELECT button MENU button Top Control ON - OFF INPUT POWER WARNING VOLUME - VOLUME + AUTO SET UP MENU SELECT LAMP REPLACE POINT button (outer
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 23
    Basic Operation Menu Bar For computer source Guide Window Shows the selected Menu of the True / Wide / Digital zoom +/-] (p34) Setting Menu Used to change settings of the projector or reset lamp replace counter. (p42-48) Basic Operation Input Menu Used to select input source either Computer or
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 24
    is provided to automatically correct Keystone distortion according to the projector's tilt and adjust the computer display parameters (Fine sync, button, adjust manually by pressing the KEYSTONE button on the remote control or selecting Keystone in the Setting menu. (p25, 42) Remote Control AUTO
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 25
    AUTO SET on the remote control, correct the image manually as follows: 1 Press the KEYSTONE button on the remote control or select Keystone part with Point 7 button. Reduce the right part with Point 8 button. Basic Operation Picture Freeze Function Press the FREEZE button on the remote control
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 26
    the screen for a few seconds. (+) button to turn up the volume and (-) button to turn down the volume. Mute Press the MUTE button on the remote control to cut off sound. To restore sound to its previous level, press the MUTE button again or press the VOLUME (+/-) button. Menu Operation 1 Press
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 27
    INPUT button on the top control or press the COMPUTER button on the remote control. Before using these buttons, correct input source should be selected The specification of HDCP is decided and controlled by Digital Content Protection, LLC. Should the specification be changed, this projector may
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 28
    Menu The Auto PC Adjustment function operates to adjust the projector. ----- There is no signal input from computer. Check the connection of your computer and the projector. (See " Troubleshooting" p54) Mode 1 User preset system manually adjusted in PC Adjust menu. Adjustment data can be stored
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 29
    on the remote control unit. To store adjustment parameters Adjustment parameters from Auto PC Adjustment can be memorized in this projector. Once PC Adjustment function. When the image is not provided properly with this operation, manual adjustments are required. (p30, 31) • The Auto PC Adj. cannot
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 30
    enables you to precisely adjust several parameters to match those signal formats. The projector has 5 independent memory areas to memorize those parameters manually adjusted. It allows you to recall the setting for a specific computer. 1 Press the MENU button and the On-Screen Menu will appear
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 31
    button. Display area V Adjusts the vertical area displayed by this projector. Press the Point 7 8 button to decrease/increase value and then is displayed at 5 : 4 aspect ratio with this function off. Reset Resets all adjustment to their previous levels. Mode free To clear adjustment data previously
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 32
    the remote control. Dynamic Picture level suitable for viewing picture in a bright room. Standard Normal picture level preset on this projector. green colored board, not truly effective on a black colored board. Image 1~4 User preset image in the Image Adjust Menu (p33). Menu Operation 1 Press the
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 33
    (From 0 to 15.) Gamma Press the Point 7 8 button to obtain better balance of contrast. (From 0 to 15.) Reset Resets all adjustment to their previous levels. Store To store the image data adjusted manually, move the red frame pointer to the Store icon and press the SELECT button. The Image Level Menu
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 34
    image can be also expanded by pressing the D.ZOOM ▲ button on the remote control. Digital zoom - When Digital zoom - is selected, the On-Screen 1024, reset the resolution to the lower before connecting to the projector. • The image data in other than XGA (1024 x 768 for PLCXU58/ PLC-XU56/PLC-XU51) or
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 35
    top control or the VIDEO button on the remote control. Before using these buttons, correct input projector automatically detects incoming video signal, and adjusts itself to optimize its performance. The projector Input ✔Note: When Monitor out is selected at the Terminal item in the Setting Menu,
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 36
    button on the top control or press the COMPUTER button on the remote control. Before using these buttons, correct input source should be selected is coming from video equipment connected to the COMPUTER IN 2/ COMPONENT IN/ MONITOR OUT terminal with a Scart-VGA Cable, select RGB (Scart). Input Menu
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 37
    to optimize its performance. When Video System is PAL-M or PAL-N, select system manually. PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N If the projector cannot reproduce proper video image, it is necessary to select a specific broadcast signal format among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 38
    the remote control. Dynamic Picture level suitable for viewing picture in a bright room. Standard Normal picture level preset on this projector. Cinema projected on a Blackboard (Green). See above for further description. Image1~4 User preset image in the Image Adjust Menu (p39, 40). Image Select
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 39
    Image Level Adjustment 1 Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move the red frame pointer to the Image Adjust Menu icon. 2 Press the Point d button to move the red frame pointer to the item that you want to adjust and then press the SELECT button.
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 40
    for a still picture. Film This function is effective on 3-2 pulldown video sources. With this function On, the projector reproduces pictures faithful to the original film quality. Reset Resets all adjustment to their previous figure. Store To store the adjustment data, move the red frame pointer to
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 41
    Video Input Screen Size Adjustment This projector has a picture screen resize function, which enables you to display the desirable image size. 1 Press the MENU button and the On-Screen Menu will appear.
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 42
    according to the projector's tilt. Manual . . . .works only when pressing the AUTO SET button on the remote control or the AUTO the keystone adjustment even if the AC power cord is disconnected. Reset . . . . .resets the keystone adjustment when the AC power cord is disconnected. Setting
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 43
    Setting Blue back When this function is "On," the projector produces a blue image while input signal is not no longer change the Logo PIN code setting. For details on PIN code setting, refer to relevant instructions of the PIN Code Lock function on page 47. Logo PIN Code Lock Logo PIN Code Lock
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 44
    "User". Then the captured image can be displayed when turning on the projector data is automatically reset and the projector captures an image without MONITOR OUT terminal on the back of the projector is switchable for computer input or monitor output. (See page 9) Select Computer 2 or Monitor
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 45
    the lamp life, the Power Management function turns off the projection lamp when the remote control unit is pressed. Shutdown . . .When the lamp has been fully cooled down, the power will be turned off. Off The Power Management function is canceled. On start When this function is "On," the projector
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 46
    Setting Pointer You can emphasize a part of the projected image with this function. patterns (Arrow, Finger, and Dot) of Pointer. (See page 12 for operation.) Remote control This projector provides eight different remote control codes (Code 1-Code 8); the factory-set, initial code (Code 1) and
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 47
    PIN CODE NO. MEMO ON PAGE 63, AND KEEP IT SECURELY. SHOULD THE PIN CODE BE LOST OR FORGOTTEN, THE PROJECTOR CAN NO LONGER BE OPERATED. PIN code lock When the projector is locked with the PIN code, the PIN code lock mark appears on the menu bar. Enter a PIN code Pointer
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 48
    . In this mode, cooling time after turning off the projector will be extended longer than in the normal mode. Lamp counter reset This function is used to reset the lamp replace counter. When replacing the projection lamp, reset the lamp replace counter by using this function. See page 53 for
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 49
    , disconnect the AC power cord and contact the service station for check and repair. CAUTION DO NOT LEAVE THE PROJECTOR WITH THE AC POWER CORD CONNECTED UNDER THE ABNORMAL CONDITION. IT MAY RESULT IN FIRE OR ELECTRIC SHOCK. TOP CONTROL WARNING LECT LAMP REPLACE VOLUME + WARNING lights red 49
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 50
    dry them well. Replace the air filters properly. Make sure that the air filters are fully inserted. CAUTION Do not operate the projector with the air filters removed. Dust may accumulate on the LCD panel and the projection mirror degrading picture quality. Do not put small parts into the air intake
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 51
    of cleaner. Abrasive cleaners, solvents, or other harsh chemicals might scratch the surface. 3 When the projector is not in use, replace the lens cover. Cleaning the Projector Cabinet Follow these steps to clean the projector cabinet. 1 Disconnect the AC power cord before cleaning. 2 Softly wipe the
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 52
    ordering a projection lamp, give the following information to the dealer. ● Model No. of your projector ● Replacement Lamp Type No. : PLC-XU58/ PLC-XU56/ PLC-XU51/PLC-SU51 : POA-LMP55 (for PLC-XU58/PLC-XU51) (Service Parts No. 610 309 2706) POA-LMP65 (for PLC-XU56/PLC-SU51) (Service Parts No. 610
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 53
    should be replaced, i.e., if the LAMP REPLACE indicator lights up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down. ( Follow carefully the instructions in the Lamp Replacement section of this manual. ) Continuous use of the lamp with the LAMP REPLACE indicator lighted
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 54
    Troubleshooting Before calling your dealer or service center for assistance, check the items below once again. - Make sure you have properly connected the projector to change the setting for monitor output when connecting to a projector. See your computer's instruction manual for the setting. - It
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 55
    See page 17.) WARNING : High voltages are used to operate this projector. Do not attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Give the model number and explain about the
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 56
    signal. PC Adjust Auto PC Adj. Fine sync. Total dots Horizontal Vertical Current mode Clamp Display area 56 Display area - H Display area - V Full screen Reset Mode free Store Quit RGB( Analog ) RGB( PC Digital ) RGB( AV HDCP ) RGB Component RGB( Scart ) Auto Video S-Video 0 - 63 On / Off Go
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 57
    Quit Store / Reset On / Off On / Off Off On PIN code change Quit Off User Default Yes/No On / Off On / Off Computer 2 Monitor out Eco / Normal Off Ready Shut down Timer(1-30 Min) Quit On / Off Normal Auto Eco Spotlight Pointer Quit Code 1 - 8 Quit Mouse / Projector Off Projector Remote Control Quit
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 58
    or the service center for service and checkup. Do not leave the projector on. It may cause electric shock or a fire hazard. • • • lights green. • • • blinks green. • • • lights red. • • • blinks red. • • • off ✽ When the life of the projection lamp draws to an end, the LAMP REPLACE indicator
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 59
    Specifications PLC-XU58/PLC-XU56/PLC-XU51 can basically accept the signal from all computers with the V, H-Frequency mentioned below and less than 140 MHz of Dot Clock. PLC than 100 MHz of Dot Clock. These modes are not available on PLC-SU51. ON-SCREEN DISPLAY RESOLUTION VGA 1 640 x 480 VGA 2
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 60
    H x D) Net Weight Feet Adjustment Multi-media Projector 11.73" x 2.8" x 8.58" (298mm x 71mm x 218mm) (Not including adjustable feet) 6.2 lbs (2.8kgs) 0˚ to 11.8˚ Panel Resolution LCD Panel System Panel Resolution Number of Pixels PLC-XU58/PLC-XU56/XU51 0.8" TFT Active Matrix type, 3 panels 1,024
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 61
    Appendix Appendix Accessories Owner's Manual AC Power Cord Remote Control and Batteries DVI-VGA Cable USB Cable Lens Cover with String and Screw Soft Carrying Bag PIN Code Label ● The specifications are subject to change without notice. ● LCD panels are manufactured to the highest possible
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 62
    Appendix Configurations of Terminals COMPUTER INPUT/COMPONENT INPUT/MONITOR OUTPUT TERMINAL (ANALOG) Terminal : Analog RGB (Mini D-sub 15 pin) 54 32 1 10 9 11 12 13 14 15 16 17 18 19 20 21 22 23 24 C3 C4 C5 SERVICE PORT CONNECTOR Terminal : Mini DIN 8-PIN 876 5 43 21 C1 Analog Red Input C2 Analog
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 63
    Number Memo Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. PIN Code Lock No. Factory default set No: 1 2 3 4* Logo PIN Code Lock No. Factory default set
  • Sanyo PLC-XU56 | Instruction Manual, PLC-XU56 - Page 64
    Printed in Japan Part No. 610 314 6645 (1AA6P1P4532-- MT7A) SANYO Electric Co., Ltd.
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
Multimedia Projector
MODEL
PLC-XU58
PLC-XU56
PLC-XU51
PLC-SU51
Owner’s Manual