Sanyo PLC-XU58 Instruction Manual, PLC-XU58
Sanyo PLC-XU58 Manual
 |
View all Sanyo PLC-XU58 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sanyo PLC-XU58 manual content summary:
- Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 1
Multimedia Projector MODEL PLC-XU58 PLC-XU56 PLC-XU51 PLC-SU51 Owner's Manual - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 2
16.77 million colors, and matrix liquid crystal display (LCD) technology. ◆ Compact Design This projector is designed compact in size and weight. It is easy power consumption and maintains the lamp life. (See page 45.) ◆ Switchable Interface Terminal The projector provides a switchable interface - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 3
Cover 50 Cleaning the Projection Lens 51 Cleaning the Projector Cabinet 51 Lamp Replacement 52 Lamp Replace Counter 53 Appendix 54 Troubleshooting 54 Menu Tree 56 Indicators and Projector Condition 58 Compatible Computer Specifications 59 Technical Specifications 60 Optional - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 4
operate improperly, read this manual again, check operations and cable connections and try the solutions in the "Troubleshooting" section in the end of this booklet. If the problem still persists, contact the dealer where you purchased the projector or the service center. CAUTION RISK OF ELECTRIC - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 5
with the projector. Wall or shelf mounting should follow the manufacturer's instructions, and should use a mounting kit projector exhibits a distinct change in performance-this indicates a need for service. When replacement parts are required, be sure the service technician has used replacement - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 6
fans are provided to cool down the projector. This projector monitors internal temperature and control the running speed of the cooling fans. Installing the Projector in Proper Position Install the projector properly. Improper Installation may reduce the lamp life and cause a fire hazard. 20˚ Do - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 7
otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Model Numbers Trade Name Responsible party Address Telephone No. : PLC-XU58, PLC-XU56, PLC-XU51, PLC-SU51 : Sanyo : SANYO FISHER COMPANY : 21605 - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 8
Bottom !2 !3 !1 !4 q Power Cord Connector w Infrared Remote Receiver e Zoom Lever r Focus Ring t Projection Lens y Lens Cover (See page 50 for attaching.) u Air Intake Vent i Top Controls and Indicators o Air Intake Vent !0 Terminals and Connectors !1 Speaker !2 Lamp Cover !3 Air Intake Vent (back - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 9
. (p 17, 19) w SERVICE PORT This jack is used to service this projector. e AUDIO IN Connect the operating the connected computer with the remote control, connect USB port of your computer controls this unit may occasionally malfunction and need to be reset. This can be done by pressing the RESET - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 10
Functions Top Control qw er t y ON - OFF INPUT POWER WARNING VOLUME - VOLUME + AUTO SET UP MENU SELECT LAMP REPLACE o internal temperature of the projector exceeds the operating range. (p49, 58) u LAMP REPLACE indicator Turns yellow when the life of the projection lamp draws to an end. - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 11
laser light window or a signal is being sent from the remote control to the projector. e AUTO PC button Operates the Auto PC adjustment function. @1 VIDEO button Selects input source (VIDEO). (p35) @2 RESET/ON/ALL-OFF switch When using the remote control, set this switch to "ON." Set it to "ALL OFF - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 12
to the Pointer.) 2 Press the LASER button on the remote control toward the projector. Spotlight or Pointer is displayed on the screen with the pressing the MENU button for more than 7 seconds or slide the RESET/ON/ALL-OFF switch to "RESET". (p11) NO SHOW button While pressing the MENU button, hold - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 13
R-CLICK button Acts as right click while the projector and a computer are connected with a USB cable. Operating Range Point the remote control toward the projector (Infrared Remote Receiver) whenever pressing any button. Maximum operating range for the remote control is about 16.4' (5m) and 60° in - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 14
the remote control to moisture, or heat. ● Do not drop the remote control. ● If a battery has leaked on remote control, carefully wipe case clean and install new batteries. ● Risk of explosion if battery is replaced by an incorrect type. ● Dispose of used batteries according to the instructions. 14 - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 15
. 3 To retract the adjustable feet, lift the front of the projector and pull and undo the feet lock latches. Keystone distortion of the projected image can be adjusted automatically with Auto Setup function or manually with the remote control or the menu operation. (p24, 25, and 42) Adjustable Feet - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 16
plug into any other type of power system. Consult your authorized dealer or service station if you are not sure of the type of power being supplied. Connect the projector with all peripheral equipment before turning the projector on. (See page 17-19 for connection.) CAUTION For safety, unplug AC - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 17
USB Cable • Audio Cables (Mini Plug: stereo Not supplied with this projector.) Monitor Input Audio Output Audio cable (stereo) ✽ USB port USB cable DVI - I AUDIO IN R L (MONO) VIDEO USB SERVICE PORT S-VIDEO COMPUTER / COMPONENT RESET MCI COMPUTER IN 2 / COMPONENT IN / MONITOR OUT AUDIO - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 18
Cable ✽ • Audio Cable (Mini Plug: stereo Not supplied with this projector.) S-Video Output Composite Video and Audio Output (R) (L) (Video) S-Video - I AUDIO IN R L (MONO) VIDEO USB SERVICE PORT S-VIDEO COMPUTER / / CCOOMMPPOONNEENNTT RESET MCI COMPUTER IN 2 / COMPONENT IN / MONITOR OUT - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 19
2) ✽ • Scart-VGA Cable ✽ • Component-VGA Cable ✽ (✽ = Not supplied with this projector.) Installation RGB Scart 21-pin Output Component Video Output (Y, Pb/Cb, Pr/Cr) Audio Output Scart II AUDIO IN R L (MONO) VIDEO USB SERVICE PORT S-VIDEO COMPUTER / / CCOOMMPPOONNEENNTT RREESSEETT MCI - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 20
Lamp mode status icon (see page 45) appear on the screen. If the projector is locked with a PIN code, PIN code Input Dialog Box will appear. Enter the PIN code as instructed of this manual, and keep it at hand. Should the PIN code be missing or forgotten, consult your dealer or service center. PIN - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 21
continuously without rest. Continuous use may result in shortening the lamp life. Turn off the projector and give it a rest about an hour in every 24 hours. • This projector monitors internal temperature and automatically controls the running speed of the cooling fans. • If the WARNING indicator - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 22
Operation How to Operate the On-Screen Menu The projector can be adjusted or set via the On-Screen exit this menu. Remote Control POINT button SELECT button MENU button Top Control ON - OFF INPUT POWER WARNING VOLUME - VOLUME + AUTO SET UP MENU SELECT LAMP REPLACE POINT button (outer - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 23
Basic Operation Menu Bar For computer source Guide Window Shows the selected Menu of the True / Wide / Digital zoom +/-] (p34) Setting Menu Used to change settings of the projector or reset lamp replace counter. (p42-48) Basic Operation Input Menu Used to select input source either Computer or - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 24
be corrected properly by pressing the AUTO SETUP/ AUTO SET button, adjust manually by pressing the KEYSTONE button on the remote control or selecting Keystone in the Setting menu. (p25, 42) Remote Control AUTO SET button Top Control ON - OFF INPUT POWER WARN VOLUME - VOLUME + AUTO SET UP MENU - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 25
picture still has keystone distortion after pressing the AUTO SETUP button on the top control or the AUTO SET on the remote control, correct the image manually as follows: 1 Press the KEYSTONE button on the remote control or select Keystone in the Setting Menu (p42). The keystone dialog box appears - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 26
the screen for a few seconds. (+) button to turn up the volume and (-) button to turn down the volume. Mute Press the MUTE button on the remote control to cut off sound. To restore sound to its previous level, press the MUTE button again or press the VOLUME (+/-) button. Menu Operation 1 Press the - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 27
pressing the INPUT button on the top control or press the COMPUTER button on the remote control. Before using these buttons, correct input of HDCP is decided and controlled by Digital Content Protection, LLC. Should the specification be changed, this projector may not display the digital - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 28
Menu The Auto PC Adjustment function operates to adjust the projector. ----- There is no signal input from computer. Check the connection of your computer and the projector. (See " Troubleshooting" p54) Mode 1 User preset system manually adjusted in PC Adjust menu. Adjustment data can be stored - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 29
on the remote control unit. To store adjustment parameters Adjustment parameters from Auto PC Adjustment can be memorized in this projector. Once PC Adjustment function. When the image is not provided properly with this operation, manual adjustments are required. (p30, 31) • The Auto PC Adj. cannot - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 30
PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has 5 independent memory areas to memorize those parameters manually adjusted. It allows you to recall the setting for a specific computer. 1 Press the MENU button and the On-Screen Menu - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 31
button. Display area V Adjusts the vertical area displayed by this projector. Press the Point 7 8 button to decrease/increase value and then is displayed at 5 : 4 aspect ratio with this function off. Reset Resets all adjustment to their previous levels. Mode free To clear adjustment data previously - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 32
1, Image 2, Image 3, and Image 4 by pressing the IMAGE button on the remote control. Dynamic Picture level suitable for viewing picture in a bright room. Standard Normal picture level preset on this projector. Real Picture level with improved halftone for graphics. Blackboard(Green) Picture level - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 33
(From 0 to 15.) Gamma Press the Point 7 8 button to obtain better balance of contrast. (From 0 to 15.) Reset Resets all adjustment to their previous levels. Store To store the image data adjusted manually, move the red frame pointer to the Store icon and press the SELECT button. The Image Level Menu - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 34
for PLC-XU58/ PLC-XU56/ PLC-XU51, 800 x 600 for PLC-SU51), this projector enters the D.ZOOM ▼ button on the remote control. To exit the Digital zoom +/- reset the resolution to the lower before connecting to the projector. • The image data in other than XGA (1024 x 768 for PLCXU58/ PLC-XU56/PLC-XU51 - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 35
pressing the INPUT button on the top control or the VIDEO button on the remote control. Before using these buttons, correct input source selecting Auto, the projector automatically detects incoming video signal, and adjusts itself to optimize its performance. The projector selects connection in the - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 36
Selection (Component, RGB Scart 21-Pin) Direct Operation Choose Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control. Before using these buttons, correct input source should be selected through menu operation as described below. INPUT button - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 37
detects incoming video system, and adjusts itself to optimize its performance. When Video System is PAL-M or PAL-N, select system manually. PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N If the projector cannot reproduce proper video image, it is necessary to select a specific broadcast signal format - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 38
), Image 1, Image 2, Image 3, and Image 4 by pressing the IMAGE button on the remote control. Dynamic Picture level suitable for viewing picture in a bright room. Standard Normal picture level preset on this projector. Cinema Picture level adjusted for the picture with fine tone. Blackboard(Green - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 39
display other items. Press the SELECT button at this icon to display previous items. ✔Note: The Tint cannot be adjusted when the video system is PAL, SECAM, PAL-M, or PAL-N. Video Input 39 - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 40
this function On, the projector reproduces pictures faithful to the original film quality. Reset Resets all adjustment to their previous When selecting NTSC, NTSC4.43 PAL-M or 480i in the AV System Menu (p37). 2. When selecting Auto and signal is NTSC, NTSC4.43, PAL-M(Composite) or 480i(Comopnent) - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 41
Video Input Screen Size Adjustment This projector has a picture screen resize function, which enables you to display the desirable image size. 1 Press the MENU button and the On-Screen Menu will appear. - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 42
projector's tilt. Manual . . . .works only when pressing the AUTO SET button on the remote control or the AUTO SETUP button on the top control the keystone adjustment even if the AC power cord is disconnected. Reset . . . . .resets the keystone adjustment when the AC power cord is disconnected. - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 43
Setting Blue back When this function is "On," the projector produces a blue image while input signal is not no longer change the Logo PIN code setting. For details on PIN code setting, refer to relevant instructions of the PIN Code Lock function on page 47. Logo PIN Code Lock Logo PIN Code Lock - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 44
by the Keystone function, the adjustment data is automatically reset and the projector captures an image without keystone adjustment. • When the Logo reversed. This function is used to project the image from a ceiling mounting the projector. Rear When this function is "On," the picture is left - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 45
lamp life, the Power Management function turns off the projection lamp control or remote control unit is pressed. Shutdown . . .When the lamp has been fully cooled down, the power will be turned off. Off The Power Management function is canceled. On start When this function is "On," the projector - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 46
Spotlight or a pointer of three different patterns (Arrow, Finger, and Dot) of Pointer. (See page 12 for operation.) Remote control This projector provides eight different remote control codes (Code 1-Code 8); the factory-set, initial code (Code 1) and the other seven codes (Code 2 to Code 8). This - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 47
PIN CODE NO. MEMO ON PAGE 63, AND KEEP IT SECURELY. SHOULD THE PIN CODE BE LOST OR FORGOTTEN, THE PROJECTOR CAN NO LONGER BE OPERATED. PIN code lock When the projector is locked with the PIN code, the PIN code lock mark appears on the menu bar. Enter a PIN code Pointer - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 48
. In this mode, cooling time after turning off the projector will be extended longer than in the normal mode. Lamp counter reset This function is used to reset the lamp replace counter. When replacing the projection lamp, reset the lamp replace counter by using this function. See page 53 for - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 49
, disconnect the AC power cord and contact the service station for check and repair. CAUTION DO NOT LEAVE THE PROJECTOR WITH THE AC POWER CORD CONNECTED UNDER THE ABNORMAL CONDITION. IT MAY RESULT IN FIRE OR ELECTRIC SHOCK. TOP CONTROL WARNING LECT LAMP REPLACE VOLUME + WARNING lights red 49 - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 50
symptoms above are noticed, contact your authorized dealer or service station for proper cleaning. Air Filter Pull up and remove. Attaching the Lens Cover When moving this projector or while not using it over an extended period of time, replace the lens cover. 1 Pass the string through a hole of - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 51
of cleaner. Abrasive cleaners, solvents, or other harsh chemicals might scratch the surface. 3 When the projector is not in use, replace the lens cover. Cleaning the Projector Cabinet Follow these steps to clean the projector cabinet. 1 Disconnect the AC power cord before cleaning. 2 Softly wipe the - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 52
ordering a projection lamp, give the following information to the dealer. ● Model No. of your projector ● Replacement Lamp Type No. : PLC-XU58/ PLC-XU56/ PLC-XU51/PLC-SU51 : POA-LMP55 (for PLC-XU58/PLC-XU51) (Service Parts No. 610 309 2706) POA-LMP65 (for PLC-XU56/PLC-SU51) (Service Parts No. 610 - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 53
should be replaced, i.e., if the LAMP REPLACE indicator lights up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down. ( Follow carefully the instructions in the Lamp Replacement section of this manual. ) Continuous use of the lamp with the LAMP REPLACE indicator lighted - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 54
Troubleshooting Before calling your dealer or service center for assistance, check the items below once again. - Make sure you have properly connected the projector monitor output when connecting to a projector. See your computer's instruction manual for the setting. - It takes about 20 seconds - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 55
See page 17.) WARNING : High voltages are used to operate this projector. Do not attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Give the model number and explain about the - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 56
signal. PC Adjust Auto PC Adj. Fine sync. Total dots Horizontal Vertical Current mode Clamp Display area 56 Display area - H Display area - V Full screen Reset Mode free Store Quit RGB( Analog ) RGB( PC Digital ) RGB( AV HDCP ) RGB Component RGB( Scart ) Auto Video S-Video 0 - 63 On / Off Go - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 57
Select Auto 1080i 1035i 720p 575p 480p 575i 480i Auto PAL SECAM NTSC NTSC 4.43 PAL-M PAL-N Dynamic Standard Cinema Blackboard(Green) Image 1 Image 2 Ceiling Rear Terminal Standby mode Power management On start Lamp mode Pointer Remote control USB Key lock PIN code lock Fan Lamp counter reset - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 58
or the service center for service and checkup. Do not leave the projector on. It may cause electric shock or a fire hazard. • • • lights green. • • • blinks green. • • • lights red. • • • blinks red. • • • off ✽ When the life of the projection lamp draws to an end, the LAMP REPLACE indicator - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 59
PLC-XU58/PLC-XU56/PLC-XU51 can basically accept the signal from all computers with the V, H-Frequency mentioned below and less than 140 MHz of Dot Clock. PLC and less than 100 MHz of Dot Clock. These modes are not available on PLC-SU51. ON-SCREEN DISPLAY RESOLUTION VGA 1 640 x 480 VGA 2 720 x - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 60
Projector 11.73" x 2.8" x 8.58" (298mm x 71mm x 218mm) (Not including adjustable feet) 6.2 lbs (2.8kgs) 0˚ to 11.8˚ Panel Resolution LCD Panel System Panel Resolution Number of Pixels PLC-XU58/PLC-XU56/XU51 ~ 140 ˚F (-10˚C ~ 60 ˚C) Remote Control Battery Operating Range Dimensions Net Weight AA, - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 61
Appendix Appendix Accessories Owner's Manual AC Power Cord Remote Control and Batteries DVI-VGA Cable USB Cable Lens Cover with String and Screw Soft Carrying Bag PIN Code Label ● The specifications are subject to change without notice. ● LCD panels are manufactured to the highest possible - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 62
(DIGITAL/ANALOG) Terminal : DVI-I C1 C2 12345678 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 C3 C4 C5 SERVICE PORT CONNECTOR Terminal : Mini DIN 8-PIN 876 5 43 21 C1 Analog Red Input C2 Analog Green Input C3 Analog Blue Input C4 Analog Horiz. sync - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 63
Number Memo Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. PIN Code Lock No. Factory default set No: 1 2 3 4* Logo PIN Code Lock No. Factory default set - Sanyo PLC-XU58 | Instruction Manual, PLC-XU58 - Page 64
Printed in Japan Part No. 610 314 6645 (1AA6P1P4532-- MT7A) SANYO Electric Co., Ltd.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
 |
 |
Multimedia Projector
MODEL
PLC-XU58
PLC-XU56
PLC-XU51
PLC-SU51
Owner’s Manual