Sanyo PLC-XW20 Owners Manual

Sanyo PLC-XW20 - XGA LCD Projector Manual

Get Sanyo PLC-XW20 - XGA LCD Projector PDF manuals and user guides
UPC - 086483044809
View all Sanyo PLC-XW20 manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo PLC-XW20 manual content summary:

  • Sanyo PLC-XW20 | Owners Manual - Page 1
    Multimedia Projector MODEL PLC-XW20 Owner's Manual
  • Sanyo PLC-XW20 | Owners Manual - Page 2
    projector from the power outlet. READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE
  • Sanyo PLC-XW20 | Owners Manual - Page 3
    , be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or injury to persons. Upon completion of any service or repairs to this projector, ask the
  • Sanyo PLC-XW20 | Owners Manual - Page 4
    is detachable, never use the plug with the cover omitted. If a replacement fuse cover is required, ensure it is of the same colour as that visible on the pin face of the plug (i.e. red or orange). Fuse covers are available from the Parts Department indicated in your User Instructions. If the plug
  • Sanyo PLC-XW20 | Owners Manual - Page 5
    EACH PART OF PROJECTOR 7 AUTO PC ADJUSTMENT 24 SETTING-UP PROJECTOR 8 MANUAL PC OF REMOTE CONTROL 14 SETTING 35 OPERATING RANGE 15 REMOTE CONTROL BATTERY INSTALLATION 15 TOP CONTROLS PROJECTOR 19 LAMP REPLACEMENT LAMP REPLACE COUNTER 38 38 ADJUSTING SCREEN 20 TROUBLESHOOTING 39
  • Sanyo PLC-XW20 | Owners Manual - Page 6
    most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. x Compact Design This projector is extremely compact in size and weight. It is designed
  • Sanyo PLC-XW20 | Owners Manual - Page 7
    OF EACH PART OF PROJECTOR FRONT INFRARED REMOTE RECEIVER PROJECTION LENS FOCUS RING POWER CORD CONNECTOR ZOOM LEVER LENS COVER BACK TOP CONTROLS AND INDICATORS EXHAUST VENTS HOT AIR EXHAUSTED ! Air blown from Exhaust Vents is hot. When using or installing projector, following precautions
  • Sanyo PLC-XW20 | Owners Manual - Page 8
    service station if you are not sure of the type of power supply being in use. Connect a projector with a peripheral equipment before turning a projector Power Cord must be used. If supplied AC Power Cord does not match your AC outlet, contact your sales dealer. Projector side AC Outlet side For
  • Sanyo PLC-XW20 | Owners Manual - Page 9
    flat projection surface. q The projector can be focused from 5.3'(1.6m Lift the front of a projector and pull FEET LOCK LATCHES on the both sides of a projector. 2 Release FEET LOCK To retract ADJUSTABLE FEET, lift the front of a projector and pull and undo FEET LOCK LATCHES. Keystone distortion of
  • Sanyo PLC-XW20 | Owners Manual - Page 10
    . CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR q Do not drop or bump a projector, otherwise damages or malfunctions may result. q When carrying a projector, use a suitable carrying case. q Do not transport a projector by using a courier or transport service in an unsuitable transport case. This
  • Sanyo PLC-XW20 | Owners Manual - Page 11
    connect properly. USB CONNECTOR (Series B) When controlling the computer with Remote Control Unit of this projector, connect USB port of your personal computer to this connector. (Refer to P12.) RESET BUTTON This projector uses a micro processor to control this unit, and occasionally, this micro
  • Sanyo PLC-XW20 | Owners Manual - Page 12
    Port ✽ Terminal Terminal Terminal CONTROL PORT Use one of these Control Cables or USB Cable corresponding with the terminal of your computer. VIDEO RESET Y - Pb / Cb - Pr / Cr USB COMPUTER AUDIO IN AV AUDIO OUT CONTROL PORT S-VIDEO COMPUTER IN Terminals of the Projector NOTE : When connecting
  • Sanyo PLC-XW20 | Owners Manual - Page 13
    Pb / Cb - Pr / Cr USB COMPUTER AUDIO IN AV AUDIO OUT CONTROL PORT S-VIDEO COMPUTER IN S-VIDEO Use any of VIDEO jack Y-Pb/CbPr/Cr jacks or S-VIDEO jack. • When has priority over S-VIDEO jack. Terminals of the Projector Audio Input External Audio Equipment Audio Amplifier Audio Speaker (stereo)
  • Sanyo PLC-XW20 | Owners Manual - Page 14
    : q Do not bend, drop Remote Control Unit, or expose Remote Control Unit to moisture or heat. q For cleaning, use soft dry cloth. Do not apply benzene, thinner, splay or any chemical material. POWER ON-OFF BUTTON Used to turn the projector on or off. (P19) VOLUME BUTTONS Used to adjust volume. (P21
  • Sanyo PLC-XW20 | Owners Manual - Page 15
    Window) whenever pressing any button. Maximum operating range for Remote Control Unit is about 16.4' (5m) and 60° in front of the projector. 16.4' (5 m) 30° 30° REMOTE CONTROL BATTERY INSTALLATION 1 Pull out Battery Holder. 2 Replace with new battery. Install with battery (+),(-) marks properly
  • Sanyo PLC-XW20 | Owners Manual - Page 16
    the item selected. It is also used to expand / compress the image in DIGITAL ZOOM mode. (P29) LAMP REPLACE WARNING TEMP. INDICATOR Flashes red when internal projector temperature is too high. (P37) LAMP REPLACE INDICATOR Turns to yellow when the life of the projection lamp draws to an end. (P38
  • Sanyo PLC-XW20 | Owners Manual - Page 17
    ON-SCREEN MENU You can control and adjust this projector through ON-SCREEN MENU. Refer to the following pages to operate each adjustment on ON-SCREEN MENU. 1 DISPLAY MENU Press MENU button to display ON-SCREEN MENU. WIRELESS REMOTE CONTROL MENU BUTTON POINT BUTTON Used to move the Pointer UP
  • Sanyo PLC-XW20 | Owners Manual - Page 18
    / Wide / Digital zoom +/-] (Refer to P29) SETTING MENU Used to change settings of projector or reset Lamp Replace Counter. (Refer to P35, 36) INPUT MENU Used to select input source either Computer or Video. (Refer to P22) PC ADJUST MENU Used to adjust parameters to match with input signal format
  • Sanyo PLC-XW20 | Owners Manual - Page 19
    " on pages 11~13 for connecting that equipment.) 2 Connect the projector's AC Power Cord into an AC outlet. LAMP Indicator lights RED, and READY Indicator lights GREEN. 3 Press POWER ON-OFF button on Top Control or on Remote Control Unit to ON. LAMP Indicator dims, and Cooling Fans start to operate
  • Sanyo PLC-XW20 | Owners Manual - Page 20
    w button or POINT DOWN button to reduce the lower part. Reduce the upper width with KEY STONE v button or POINT UP button. Reduce the lower width with KEY STONE w button or POINT DOWN button. PICTURE FREEZE FUNCTION Press FREEZE button on Remote Control Unit to freeze the picture on-screen. To
  • Sanyo PLC-XW20 | Owners Manual - Page 21
    to normal, press NO SHOW button again or press any other button. No show Message disappears after 4 seconds. P-TIMER FUNCTION Press P-TIMER button on Remote Control unit. The timer display "00 : 00" appears on the screen and the timer starts to count time (00 : 00 ~ 59 : 59). To stop P-TIMER
  • Sanyo PLC-XW20 | Owners Manual - Page 22
    by pressing INPUT button on Top Control or on Remote Control Unit. If projector cannot reproduce proper image, select projector is set correctly. (Refer to TROUBLESHOOTING on page 39.) PC SYSTEM MENU SYSTEM Menu icon Displays system being selected. SELECT COMPUTER SYSTEM MANUALLY This projector
  • Sanyo PLC-XW20 | Owners Manual - Page 23
    COMPUTER INPUT COMPATIBLE COMPUTER SPECIFICATIONS Basically this projector can accept the signal from all computers with the V, H-Frequency below mentioned and less than 140 MHz of Dot Clock. ON-SCREEN DISPLAY RESOLUTION VGA 1
  • Sanyo PLC-XW20 | Owners Manual - Page 24
    button on Remote Control Unit. Store adjustment parameters. Adjustment parameters from Auto PC Adjustment can be memorized in this projector. Once Adjustment function. When the image is not provided properly through this function, manual adjustments are required. (Refer to page 25, 26.) q Auto PC
  • Sanyo PLC-XW20 | Owners Manual - Page 25
    adjust several parameters to match with those special signal formats. This projector has 5 independent memory areas to memorize those parameters manually adjusted. This enables you to recall the setting for a specific computer whenever you use it. Note : This PC ADJSUT Menu cannot be operated when
  • Sanyo PLC-XW20 | Owners Manual - Page 26
    SELECT button at Display area icon and Display area dialog box appears. Display area Display area V Adjustment of vertical area displayed with this projector. Press POINT LEFT/RIGHT button(s) to decrease/increase value to match the resolurtion of image. Full screen Press POINT LEFT/RIGHT button
  • Sanyo PLC-XW20 | Owners Manual - Page 27
    or on Remote Control Unit. Standard Normal picture adjustment preset on this projector. Real Picture adjustment improved in reproduction of halftones. This adjustment is suitable for providing better image in brighter place. IMAGE button Standard Real Image 1 Image 2 IMAGE 1~4 User preset picture
  • Sanyo PLC-XW20 | Owners Manual - Page 28
    COMPUTER INPUT IMAGE LEVEL ADJUSTMENT 1 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer to IMAGE ADJUST Menu icon. 2 Press POINT DOWN button to move a red frame pointer to the item that you want to adjust. and then press SELECT button.
  • Sanyo PLC-XW20 | Owners Manual - Page 29
    manually press SELECT button. PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which image width uniformly. This function can be used for providing a squeezed video signal at 16 by pressing D.ZOOM v button on Remote Control Unit. Digital zoom - When Digital zoom
  • Sanyo PLC-XW20 | Owners Manual - Page 30
    VIDEO INPUT SELECTING INPUT SOURCE DIRECT OPERATION Choose Video by pressing INPUT button on Top Control or on Remote Control Unit. If projector cannot reproduce proper video source, select correct input source through MENU OPERATION (see below). INPUT button Video Computer MENU OPERATION 1
  • Sanyo PLC-XW20 | Owners Manual - Page 31
    Video system, and adjusts itself to optimize its performance. When Video System is PAL-M or PAL-N, select system manually. PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N If projector cannot reproduce proper video image, it is necessary to select a specific broadcast signal format among PAL, SECAM
  • Sanyo PLC-XW20 | Owners Manual - Page 32
    1, Image 2, Image 3 and Image 4 by pressing IMAGE button on Top Control or on Remote Control Unit. Standard Normal picture adjustment preset on this projector. Cinema Picture level adjusted for the picture with fine tone. IMAGE 1~4 User preset picture adjustment in IMAGE ADJUST Menu (P33,34). IMAGE
  • Sanyo PLC-XW20 | Owners Manual - Page 33
    VIDEO INPUT IMAGE LEVEL ADJUSTMENT 1 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button(s) to move a red frame pointer to IMAGE ADJUST Menu icon. 2 Press POINT DOWN button to move a red frame pointer to the item that you want to adjust and then press SELECT button. The
  • Sanyo PLC-XW20 | Owners Manual - Page 34
    icon Image Level Menu Move a red frame pointer to the image icon to be set and then press SELECT button. PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display the desirable image size. 1 Press MENU button and ON-SCREEN MENU will appear. Press
  • Sanyo PLC-XW20 | Owners Manual - Page 35
    starting up. Ceiling When this function is "On," picture is top / bottom and left / right reversed. This function is used to project the image from a ceiling mounted projector. Move a pointer to the item and then press POINT LEFT/RIGHT button(s). Ceiling function Rear When this function is "On
  • Sanyo PLC-XW20 | Owners Manual - Page 36
    projector and Remote Control in the ways above again. NOTE : When battery of Remote Control Unit is replaced, the remote control code automatically returns to the normal code (Code 1). Lamp counter reset This function is used to reset Lamp Replace Counter. When replacing Projection Lamp, reset Lamp
  • Sanyo PLC-XW20 | Owners Manual - Page 37
    out dust and particles. 4 Replace each Air Filter properly. Make sure that Air Filters are fully inserted. CAUTION Do not operate the projector with Air Filter removed. Dust may accumulate on LCD Panel and Projection Mirror degrading picture quality. Do not put small parts into Air Intake Vents
  • Sanyo PLC-XW20 | Owners Manual - Page 38
    No. of your projector : PLC-XW20 q Replacement Lamp Type No. : POA-LMP36 (Service Parts No. 610 293 8210) LAMP REPLACE COUNTER Be sure to reset Lamp Replace Counter when Lamp Assembly is replaced. When Lamp Replace Counter is reset, LAMP REPLACE Indicator stops lighting. 1 Turn projector on, press
  • Sanyo PLC-XW20 | Owners Manual - Page 39
    your computer. 5. If an image still does not appear, unplug a projector from your computer and check your computer monitor's display. The problem may be with your graphics controller rather than with a projector. (When you reconnect a projector, be sure to turn the computer and monitor off before
  • Sanyo PLC-XW20 | Owners Manual - Page 40
    the code of Remote Control is set to conform to projector. (See "SETTING" section on page 35, 36.) WARNING : High voltages are used to operate this projector. Do not attempt to open the cabinet. If the problem still persists after following all operating instructions, contact the sales dealer where
  • Sanyo PLC-XW20 | Owners Manual - Page 41
    's Manual AC Power Cord Wireless Remote Control Transmitter and Battery VGA Cable Carrying Bag Lens Cover q The specifications are subject to change without notice. OPTIONAL PARTS The parts listed below are optionally supplied. When ordering those parts, give name and Type No. of it to the sales
  • Sanyo PLC-XW20 | Owners Manual - Page 42
    . 6 Ground (Red) 14 Vert. sync. 7 Ground (Green) 15 Reserved 8 Ground (Blue) CONTROL PORT CONNECTOR Terminal : Mini DIN 8-PIN Connect control port (PS/2, Serial or ADB port) on your computer to this connector with Control Cable (not supplied). Pin Configuration 876 5 43 21 PS/2 Serial ADB
  • Sanyo PLC-XW20 | Owners Manual - Page 43
    43
  • Sanyo PLC-XW20 | Owners Manual - Page 44
    Printed in Japan Part No. 610 294 2811 (1AA6P1P2903-- MW6A) SANYO Electric Co., Ltd
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
Owner’s Manual
PLC-XW20
Multimedia Projector
MODEL