Sanyo PLC-ZM5000L Owners Manual
Sanyo PLC-ZM5000L - 5000 Lumens Manual
 |
UPC - 086483079450
View all Sanyo PLC-ZM5000L manuals
Add to My Manuals
Save this manual to your list of manuals |
Sanyo PLC-ZM5000L manual content summary:
- Sanyo PLC-ZM5000L | Owners Manual - Page 1
Multimedia Projector MODEL PLC-ZM5000 Network Supported Refer to the Owner's Manual below for details about network function. □ Network Set-up and Operation PLC-ZM5000L Projection lens is optional. Owner's Manual - Sanyo PLC-ZM5000L | Owners Manual - Page 2
Setting The projector has the Multi-scan system to conform to almost all computer output signals quickly (p.36). Supported resolution up to WUXGA. ♦ maintains lamp life. (p.59) ♦ Automatic Filter Replacement Function The projector monitors the condition of the filter and replaces a filter - Sanyo PLC-ZM5000L | Owners Manual - Page 3
Adjustment 37 Manual PC Filter Instructions 66 Replacing the Filter Cartridge 67 Resetting the Filter Counter 68 Resetting the Scroll Counter 68 Lamp Replacement 69 Cleaning the Projection Lens 71 Cleaning the Projector Cabinet 71 Warning Indicators 72 Appendix 73 Troubleshooting - Sanyo PLC-ZM5000L | Owners Manual - Page 4
manual. If the problem still persists, contact the dealer where you purchased the projector or the service center. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION :TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER - Sanyo PLC-ZM5000L | Owners Manual - Page 5
as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. Unplug this projector from wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power cord or plug is damaged - Sanyo PLC-ZM5000L | Owners Manual - Page 6
of the filter, refer to "Filter counter" on page 65 and "Maintenance and Care" on pages 66-68. Damages to the projector caused by using an uncleaned filter or improper maintenance will void the warranty on the projector. Top Panel Fig. 1 Filter replacement icon WARNING FILTER indicator Fig - Sanyo PLC-ZM5000L | Owners Manual - Page 7
Safety Instructions Installing the Projector in Proper Directions Use the projector properly in specified positions. Improper positioning may shorten the lamp life and result in severe accidents or fire hazard. This projector can project the picture in upward, downward, or inclined position in - Sanyo PLC-ZM5000L | Owners Manual - Page 8
central position, and then attach the protector to protect the lens. (Only for PLC-ZM5000) Protector Use the handle grip when moving the projector. Retract the adjustable feet to prevent damage to the lens and cabinet when carrying. When this projector is not in use for an extended period, put it - Sanyo PLC-ZM5000L | Owners Manual - Page 9
unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Model Number Trade Name Responsible party Address Telephone No. : PLC-ZM5000, PLC-ZM5000L : Sanyo : SANYO NORTH AMERICA CORPORATION : 21605 - Sanyo PLC-ZM5000L | Owners Manual - Page 10
Release Button ② Indicators ③ Lamp Cover ④ Speaker ⑤ Lens Cap (for PLC-ZM5000) ⑥ Projection Lens (for PLC-ZM5000) CAUTION Do not cover the light beam in front of the lens. High temperature from light beam may damage the lens. ⑦ Lens Mount Cover (for PLC-ZM5000L) ⑧ Infrared Remote Receiver (Front - Sanyo PLC-ZM5000L | Owners Manual - Page 11
(pp.10, 15). ② LAN CONNECTION TERMINAL Connect the LAN cable (refer to the owner's manual of "Network Set-up and Operation"). ③ ANALOG OUT TERMINAL This terminal slot is for a Kensington lock used to deter theft of the projector. *Kensington is a registered trademark of ACCO Brands Corporation. ⑨ 5 - Sanyo PLC-ZM5000L | Owners Manual - Page 12
is detected or the filter counter reaches a time set in the timer setting, urging immediate filter/ filter cartridge replacement (pp.65, 66, 81). ⑫ SHUTTER indicator Light blue when the shutter is closed (p.79). ⑬ LAMP REPLACE indicator Light orange when the projection lamp reaches its end of life - Sanyo PLC-ZM5000L | Owners Manual - Page 13
the selected item (p.25). - Expand or compress the image in the Digital zoom mode (p.43). ⑩ MOUSE POINTER button Move a pointer of the projector or a pointer for wireless mouse operation (p.32). ⑪ AUTO PC button Automatically adjust the computer image to its optimum setting (pp.29, 37). ⑫ INPUT - Sanyo PLC-ZM5000L | Owners Manual - Page 14
). ⑮ FREEZE button Freeze the picture on the screen (p.30). ⑯ LENS SHIFT button Select the Lens Shift function (p.29). ⑰ ZOOM buttons Zoom in and out the images this jack when using as a wired remote control. ㉑ FILTER button Scroll the filter (p.30). 14 ㉒ FOCUS buttons Adjust the focus (p.29). - Sanyo PLC-ZM5000L | Owners Manual - Page 15
of an explosion if battery is replaced by an incorrect type. ● Dispose of used batteries according to the instructions or your local disposal rule or guidelines. Remote Control Receivers and Operating Range Point the remote control toward the projector (to Infrared Remote Receivers) when pressing - Sanyo PLC-ZM5000L | Owners Manual - Page 16
or video equipment next to each other are being operated at the same time. Change the remote control code for the projector first before changing that for the remote control. See "Remote control" in the Setting Menu on page 58. MENU button 1 Press and hold the MENU - Sanyo PLC-ZM5000L | Owners Manual - Page 17
Projector For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the screen. (for PLC-ZM5000 60% low level of the display. Lens shift adjustable range 60% When the lens is shifted to top. When the lens is shifted to bottom. 10% The display - Sanyo PLC-ZM5000L | Owners Manual - Page 18
Installation Lens Installation When replacing the lens or using an optional lens, install the lens by following the instructions below. Ask the sales dealer for detailed information of the optional lens specifications. Removing the lens 1 Shift the lens to the central position by using the Lens - Sanyo PLC-ZM5000L | Owners Manual - Page 19
out port HDMI- DVIDVI Digital cable cable Serial Cross USB cable cable HDMI DIGITAL CONTROL USB IN PORT Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables. ﹡ See the next page for the signals that can output to the ANALOG OUT - Sanyo PLC-ZM5000L | Owners Manual - Page 20
• Scart-VGA cable • HDMI cable Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables. Analog Out Signal Table Input Scart 21-pin Output HDMI Output BNC cable RCA cable Refer to the Analog Out Signal Table (above). S-video cable - Sanyo PLC-ZM5000L | Owners Manual - Page 21
Connecting for Audio Signal Cables used for connection ( = Cables not supplied with this projector.) • Audio cables Installation Audio Audio Output Output (R) (L) (R) (L) External Audio Equipment Audio Input Audio Audio cable cable (stereo) (stereo) Audio cable AUDIO IN 1/2 (R) (L) Audio - Sanyo PLC-ZM5000L | Owners Manual - Page 22
system. If you are not sure of the type of power being supplied, consult your authorized dealer or service center. Connect the projector with all peripheral equipment before turning on the projector. CAUTION The AC outlet must be near this equipment and must be easily accessible. Note: Unplug the - Sanyo PLC-ZM5000L | Owners Manual - Page 23
be automatically shut down in 3 minutes after turning on to protect the projector. (pp. 66-68, 81) • When the Picture in Picture function is set to User 1-5, User 1-5, Input source, Lamp control status, Lamp replacement icon and Filter warning icon will appear on the screen for 10 seconds. Use the - Sanyo PLC-ZM5000L | Owners Manual - Page 24
a new PIN code; write down the number in a column on page 87 of this manual and keep it on hand. Should the PIN code be missing or forgotten, consult your dealer or service center. Turning Off the Projector 1 Press the ON/STAND-BY button on the side control or the STAND-BY button - Sanyo PLC-ZM5000L | Owners Manual - Page 25
Menu The projector can be adjusted or set via the On-Screen Menu. The menu has a hierarchical structure, with a main menu that is divided into submenus, which are further divided into other submenus. For each adjustment and setting procedure, refer to respective sections in this manual. Side - Sanyo PLC-ZM5000L | Owners Manual - Page 26
V-sync freq., Screen, Language, Lamp status, Lamp counter, Filter counter, Power management, Key lock, PIN code lock, Shutter management, Simple mode, Remote control, and SERIAL NO. (p.29). Network See the owner's manual of "Network Set-up and Operation". Guide The key operation is displayed. 26 - Sanyo PLC-ZM5000L | Owners Manual - Page 27
center position of the screen. Lens shift Shutter Function Shutter function allows you to completely block out light to the screen. Press the SHUTTER button to close the shutter inside the projector. To open up the shutter, press the SHUTTER button again. Refer to p.63 for details of setting - Sanyo PLC-ZM5000L | Owners Manual - Page 28
Basic Operation Sound Adjustment Direct Operation Volume Press the VOLUME+/- buttons on the side control or on the remote control to adjust the volume. The volume dialog box appears on the screen for a few seconds. Side Control VOLUME +/- buttons Mute Press the MUTE (Point ▼) button on the - Sanyo PLC-ZM5000L | Owners Manual - Page 29
enables you to make the desired operation quickly without calling up the On-Screen Menu. . Remote Control SHUTTER button AUTO PC button LENS SHIFT button See page 27 for details. the actual values. • SERIAL NO. is used to service the projector. FOCUS buttons Press the FOCUS buttons on the remote - Sanyo PLC-ZM5000L | Owners Manual - Page 30
Freeze function is working. Fig.1 User 1 of PIP (example) FILTER button Press and hold the FILTER button for more than 5 seconds to operate electrically operated filter to replace the filter. Note: • The filter cannot be rewound. • When the filter is replaced, the total accumulated time of the - Sanyo PLC-ZM5000L | Owners Manual - Page 31
Correction If a projected picture still has keystone distortion after pressing the AUTO PC button on the remote control, correct the image manually as follows: Press the KEYSTONE button on the remote control to switch the Standard (for Vertical/Horizontal) /Corner correction adjustment. The - Sanyo PLC-ZM5000L | Owners Manual - Page 32
When the Pointer function is used, the wireless mouse is not available. 2 When a USB cable is connected to the computer and the projector, turn on the projector first, then the computer. If you turn on the computer first, the wireless mouse function may not operate properly. L-CLICK button Acts as - Sanyo PLC-ZM5000L | Owners Manual - Page 33
Input Selection Direct Operation Side Control/Remote Control Operation Side Control Remote Control INPUT button* INPUT button* * Only the Input button function is set Mode 1 in the Setting menu, the INPUT button is used for switching input source. (p.51) The input source changes each time you - Sanyo PLC-ZM5000L | Owners Manual - Page 34
Input Selection Computer Input Source Selection Menu Operation 1 Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Input and then press the Point ► or the SELECT button. 2 Use the Point ▲▼ buttons to select the desired input and then press the Point ► button - Sanyo PLC-ZM5000L | Owners Manual - Page 35
component signal and the analog RGB signal. When analog RGB signal is not recognized in Y,Pb/Cb,Pr/Cr input source, set to RGB input manually. INPUT 2 MENU INPUT 3 MENU WHEN SELECTING INPUT 3 (AV TERMINALS ) When connecting to video equipment, select the type of Video source in the Source Select - Sanyo PLC-ZM5000L | Owners Manual - Page 36
(pp. 38-39). ----- There is no signal input from the computer. Check the connection between your computer and the projector. (See "Troubleshooting" on pp. 73-75.) Mode 1 The preset system is manually adjusted in the PC adjust Menu. The adjusted data can be stored in Mode 1-10 (pp.38-39). SVGA - Sanyo PLC-ZM5000L | Owners Manual - Page 37
parameters: The adjusted parameters from the Auto PC Adjustment can be stored in the projector. Once the parameters are stored, the setting can be done just by selecting Mode in PC SYSTEM Menu (p.36). See "Manual PC Adjustment" on pages 38-39. Note: • Fine sync, Total dots, Position H and Position - Sanyo PLC-ZM5000L | Owners Manual - Page 38
you to precisely adjust several parameters to match those special signal formats. The projector has 10 independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific computer. 1 Press the MENU button to display the On-Screen Menu. Use the - Sanyo PLC-ZM5000L | Owners Manual - Page 39
selected when 480i, 575i, 480p, 575p, 720p, 1035i, 1080i or 1080p is selected in the PC System Menu (p.36). • When input computer signal to the projector, PC adjust function will become available. Press the MENU button to close this dialog box. Press the SELECT button to store the data. 39 - Sanyo PLC-ZM5000L | Owners Manual - Page 40
The factory default setting is Standard. Dynamic For viewing pictures in a bright room. Standard Normal picture level preset on the projector. Real Picture level with improved halftone for graphics. Image 1-10 User preset picture adjustment in the Image adjust Menu. (pp.41-42) Image select Menu 40 - Sanyo PLC-ZM5000L | Owners Manual - Page 41
Computer Input Image Adjustment 1 Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Image adjust and then press the Point ► or the SELECT button. 2 Use the Point ▲▼ buttons to select the desired item and then press the SELECT button to display the adjustment - Sanyo PLC-ZM5000L | Owners Manual - Page 42
over the screen. True Provide the image in its original size. When the original image size is larger than the screen size (1920 x 1200), the projector goes to the panning mode automatically. Use the Point buttons to pan the image. When adjusted, the arrows will turn red. When reaching to the - Sanyo PLC-ZM5000L | Owners Manual - Page 43
Computer Input Custom adj. Adjust the screen scale and position manually with this function. Press the Point ► button or the SELECT button at Custom adj. and Custom adj. is displayed on the screen, you can use - Sanyo PLC-ZM5000L | Owners Manual - Page 44
. This function is used to project the image from a ceiling-mounted projector. Keystone Ceiling Rear Rear When this function is set to On, the 16:9 projection screen. Default (16:10) ....1 6:10 is the aspect of the LCD panel. The original Screen Menu is available. 16:9 Set to a 16:9 projection - Sanyo PLC-ZM5000L | Owners Manual - Page 45
itself to optimize its performance. When Video System is PAL-M or PAL-N, select the system manually. PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N. Y, Pb/Cb - Sanyo PLC-ZM5000L | Owners Manual - Page 46
Image select Menu Dynamic For viewing pictures in a bright room. Standard Normal picture level preset on the projector. Natural Natural picture level preset on the projector. Cinema Picture level adjusted with fine tone. Image 1-10 User preset picture adjustment in the Image adjust Menu. (p.48) 46 - Sanyo PLC-ZM5000L | Owners Manual - Page 47
Video Input Image Adjustment 1 Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Image adjust and then press the Point ► or the SELECT button. 2 Use the Point ▲▼ buttons to select the desired item and then press the SELECT button to display the adjustment - Sanyo PLC-ZM5000L | Owners Manual - Page 48
scan mode. Off Progressive scan mode is Off. On Progressive scan mode is On. Film For watching a film. With this function, the projector reproduces pictures faithful to the original film quality. Reset To reset the adjusted data, select Reset and press the SELECT button. A confirmation box - Sanyo PLC-ZM5000L | Owners Manual - Page 49
naturally without changing the center areas. Custom Provide the last stored aspect screen image. Custom adj. Custom adj. Adjust the screen scale and position manually with this function. Press the Point ► button at Custom adj. and the Custom adjustment menu is displayed on the screen, you can use - Sanyo PLC-ZM5000L | Owners Manual - Page 50
. This function is used to project the image from a ceiling-mounted projector. Keystone Ceiling Rear When this function is set to On, the picture 16:9 projection screen. Default (16:10) ....1 6:10 is the aspect of the LCD panel. The original Screen Menu is available. 16:9 ..... Set to a 16:9 - Sanyo PLC-ZM5000L | Owners Manual - Page 51
hen pressing the INPUT button on the side control or the remote control. Mode 3...... Input search works under the following situation: -When turning on the projector by pressing the ON/STAND-BY button on the side control or pressing the ON button on the remote control. -W hen pressing the INPUT - Sanyo PLC-ZM5000L | Owners Manual - Page 52
turning on the projector. Use this function when you want to project the image as early as possible even when the lamp is not bright buttons to switch among each option. Blue......Project a blue background. User......Project an image captured in the Logo setting. Black......Project a black - Sanyo PLC-ZM5000L | Owners Manual - Page 53
function and set it to User. Then the captured image will be displayed the next time you turn on the projector. To cancel the capture function WUXGA (1920 x 1200). • When capturing the image that has been adjusted by the Keystone function, the adjusted data is automatically reset and the projector - Sanyo PLC-ZM5000L | Owners Manual - Page 54
"Set". Press the SELECT button so that you can start to operate the projector. When using remote control Press the Number buttons on the remote control to to "Set". Press the SELECT button so that you can start to operate the projector. If you enter an incorrect Logo PIN code, Logo PIN code and the - Sanyo PLC-ZM5000L | Owners Manual - Page 55
in Screen aspect (pp.44, 50). • When P by P is selected in every User 1-5 and the 4:3 function is selected in Screen aspect, PIP button on the remote not available depending on the input signals and the selected input terminals. Refer to List of Picture in Picture for details. (p.89) • When the - Sanyo PLC-ZM5000L | Owners Manual - Page 56
the Where to store? dialog box. Move the highlight to one of the mode (User 1 - 5) which you want to store and press the SELECT button. Then the of Digital RGB vary from equipment to equipment. For details, refer to the owner's manual of your Digital RGB equipment. When the black parts of the - Sanyo PLC-ZM5000L | Owners Manual - Page 57
Mode 2 has been selected and the projection lamp exceeds the recommended total hours of use, the replacement icon will be displayed at the time of power-on. Then the projector will turn off after 3 minutes. Lamp replacement icon The Lamp replacement icon will not appear when the Display function - Sanyo PLC-ZM5000L | Owners Manual - Page 58
when the filter is being scrolled. • The filter cannot be rewound. • When the filter is replaced, the total accumulated time of the filter use is Code" on page 16. Note: • When different codes are set on the projector and on the remote control, no operation can be made. In that case, switch - Sanyo PLC-ZM5000L | Owners Manual - Page 59
Eco when you do not use the projector via network. The projector's network function will stop when turning off the projector. Refer to the owner's manual of "Network Set-up and Operation". Setting Power management No signal 4 : 50 Timer left before Lamp is off. Note: • Factory default is Network - Sanyo PLC-ZM5000L | Owners Manual - Page 60
on just by connecting the AC power cord to the wall outlet. Note: Be sure to turn off the projector properly (see "Turning Off the Projector" on page 24). If the projector is turned off in the incorrect sequence, the Direct on function does not work properly. Pointer You can emphasize a part - Sanyo PLC-ZM5000L | Owners Manual - Page 61
is something wrong with your remote control, contact the dealer where you purchased the projector or the service center. Key lock Setting PIN code lock This function prevents the projector from being operated by unauthorized persons and provides the following setting options for security. Off - Sanyo PLC-ZM5000L | Owners Manual - Page 62
Set. Press the SELECT button so that you can start to operate the projector. When using remote control Press the Number buttons on the remote control to "Set". Press the SELECT button so that you can start to operate the projector. If you enter an incorrect PIN code, PIN code and the number will - Sanyo PLC-ZM5000L | Owners Manual - Page 63
's side control -- INPUT 1/2/3 buttons and STAND-BY button on the remote control Management The Shutter Management function turns off the projection lamp when the projector is left with the shutter closed and the set time has passed away. The count-down time can be set between 5 and 480 minutes - Sanyo PLC-ZM5000L | Owners Manual - Page 64
Setting Closed caption Closed caption is a printed version of the program sound or other information displayed on the screen. If the input signal contains Closed captions, you can turn on the feature and switch the channels. Press the Point ▲▼ buttons to select Off, CC1, CC2, CC3 or CC4. If the - Sanyo PLC-ZM5000L | Owners Manual - Page 65
needs replacement. To replace the filter, use the filter control function (p.58). Test pattern Various test pattern are available for use when setting up the projector: Color, Gradation1-4, All white, All black and Cross. Factory default This function returns all setting values except for User logo - Sanyo PLC-ZM5000L | Owners Manual - Page 66
Care Filter Instructions Filter prevents dust from accumulating on the optical elements inside the projector. Should the filter becomes lamp is turn off when you are replacing the filter cartridge. If you replace the filter cartridge when the projection lamp is turn on, the projector will - Sanyo PLC-ZM5000L | Owners Manual - Page 67
ORDER REPLACEMENT FILTER CARTRIDGE Replacement filter cartridge can be ordered through your dealer. When ordering, give the following information to the dealer. ● Model No. of your projector PLC-ZM5000, PLC-ZM5000L ● Replacement Filter Cartridge Type No. POA-FIL-080 (Service Parts - Sanyo PLC-ZM5000L | Owners Manual - Page 68
Reset? appears. Select Yes, then another confirmation box appears. Select Yes again to reset the Filter counter. Resetting the Scroll Counter Be sure to reset the Scroll counter after replacing the filter cartridge. 1 Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons - Sanyo PLC-ZM5000L | Owners Manual - Page 69
Maintenance and Care Lamp Replacement When the projection lamp of the projector reaches its end of life, the Lamp replacement icon appears on the screen and LAMP REPLACE indicator lights orange. Replace the lamp with a new one promptly. The timing when the LAMP REPLACE indicator should light is - Sanyo PLC-ZM5000L | Owners Manual - Page 70
of broken glass. ORDER REPLACEMENT LAMP Replacement lamp can be ordered through your dealer. When ordering, give the following information to the dealer. ● Model No. of your projector ● Replacement Lamp Type No. : PLC-ZM5000, PLC-ZM5000L : POA-LMP136 (Service Parts No.610 346 9607 - Sanyo PLC-ZM5000L | Owners Manual - Page 71
the surface of the lens. Cleaning the Projector Cabinet Unplug the AC power cord before cleaning. Gently wipe the projector body with a soft AC power cord is unplugged because the temperature inside the projector is extremely high due to the lamps. In addition, there is a risk that the internal - Sanyo PLC-ZM5000L | Owners Manual - Page 72
been installed near an Air-Conditioning/ Heating Duct or Vent? Move the installation of the projector away from the duct or vent. - Is the filter clean? Replace the filter with a new one. The projector is shut down and the LAMP indicator is lighting and other indicators are blinking. When the - Sanyo PLC-ZM5000L | Owners Manual - Page 73
Lamp mode icon appears. No image. - That is the Lamp replacement icon or the Filter warning icon. (See pages 66,69) - Check the connection between your computer or video equipment and the projector connected to the projector. See your computer's instruction manual for the setting. - It takes - Sanyo PLC-ZM5000L | Owners Manual - Page 74
is out of scroll. Replace the filter cartridge with a new one promptly. (See pages 67-68) appears on the screen - Adjust the focus of the projector. - Check Projection Lens to see if it needs cleaning. The image is out of focus. Note: M oving the projector from a cool temperature location - Sanyo PLC-ZM5000L | Owners Manual - Page 75
the screen WARNING: High voltages are used to operate this projector. Do not attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Specify the model number and explain about the - Sanyo PLC-ZM5000L | Owners Manual - Page 76
-in SP On/Off Mute On/Off Information Information Image select Image select Input System H-sync freq. V-sync freq. Screen Language Lamp status Lamp counter Filter counter Power management Key lock PIN code lock Shutter management Simple mode Remote control SERIAL NO. Dynamic Standard Real Image - Sanyo PLC-ZM5000L | Owners Manual - Page 77
Appendix Screen Screen Normal Full Wide(16:9) Zoom True Custom Custom adj. Digital zoom + Scale H & V H / V On/Off Position H / V Common Reset Digital zoom - Keystone Standard Corner correction Corner pattern Store Ceiling On/Off Rear On/Off Screen aspect Default(16:10)/16:9/4:3 - Sanyo PLC-ZM5000L | Owners Manual - Page 78
Test pattern Factory default 78 12 languages provided Position Menu size Normal/Double Mode 1/Mode 2/Mode 3 On/Countdown Off/Off Blue/User/Black Logo select User Default Off Capture Yes/No Logo PIN code lock Off/On Logo PIN code change Image Normal/Enhanced Sound HDMI/AUDIO 1 Lamp - Sanyo PLC-ZM5000L | Owners Manual - Page 79
the indicators for the projector condition. The projector is operating normally. POWER green LAMP red Indicators WARNING TEMP. red WARNING FILTER orange SHUTTER blue LAMP REPLACE orange Projector Condition The projector is off. (The AC power cord is unplugged.) The projector is in stand-by - Sanyo PLC-ZM5000L | Owners Manual - Page 80
to normal. When turning ❖ on the projector, the WARNING TEMP. indicator stops blinking. Check and replace the filter. The lamp cannot light up. (The projector is ❖ preparing for stand-by or the projection lamp is being cooled down. The projector cannot be turned on until cooling - Sanyo PLC-ZM5000L | Owners Manual - Page 81
is detecting abnormal condition. POWER green LAMP red Indicators WARNING TEMP. red WARNING FILTER orange SHUTTER blue LAMP REPLACE orange Projector Condition Fig.2 Filter replacement icon Fig.3 Fig.4 Filter cartridge replacement icon If the Filter counter reaches a time set in the - Sanyo PLC-ZM5000L | Owners Manual - Page 82
Specifications Basically this projector can accept the signal from all computers with the V- and H-Frequency mentioned below and less than 162 MHz of Dot Clock. When the input signal is Analog, refer 60.020 WUXGA 1 1920x1200 74.556 59.885 WUXGA 2 1920x1200 000 1920x1080 67.5000 60.000 - Sanyo PLC-ZM5000L | Owners Manual - Page 83
digital from HDMI/DVI-D terminal, refer to the chart below. ON- 5 D-SXGA+ 6 D-SXGA+ 7 D-UXGA D-WUXGA 2 D-WSXGA+ 1 D-WXGA+ 1 RESOLUTION 640x480 not be properly viewed. •Specifications are subject to change without signal, connect the cables, turn the projector on, then select the input Finally, - Sanyo PLC-ZM5000L | Owners Manual - Page 84
PLC-ZM5000) Quick Reference Guide Lens Mount Cover (for PLC-ZM5000L) * Contact the dealer where you AC Power Cord Remote Control and Batteries PIN Code Label Lens Antitheft screw * VGA Cable purchased the projector or the service center about the Lens Antitheft Screw. ● The specifications - Sanyo PLC-ZM5000L | Owners Manual - Page 85
. It may cause serious damage to the projector. To the sales and service eFnogr itnheelersn:s replacement and lens installation, refer to the installation manual of the optional lens. Before replacing and installing the lens, make sure that you are using the lens with the correct Type No. PJ Link - Sanyo PLC-ZM5000L | Owners Manual - Page 86
Appendix Configurations of Terminals ANALOG/ ANALOG OUT (Mini D-sub 15 pin) Input 54 32 1 10 9 8 7 6 15 14 13 12 11 1 Red Input 2 Green Input 3 Blue Input 4 No Connect 5 Ground (Horiz.sync.) 6 Ground (Red) 7 Ground (Green) 8 Ground (Blue) Output 1 Red Output 2 Green Output 3 Blue Output 4 No - Sanyo PLC-ZM5000L | Owners Manual - Page 87
Code Number Memo Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service center. PIN Code Lock No. Logo PIN Code Lock No. Factory default set No: 1 2 3 4* Factory default set - Sanyo PLC-ZM5000L | Owners Manual - Page 88
Appendix Dimensions Unit: inch (mm) Screw Holes for Ceiling Mount Screw: M6 Depth: 0.393 (10.0) 16.39(416.2) 3.31(84.0) 7.25(184.2) 4.34(110.3) 4° 19.27(489.5) 3.80(96.6) 7.70(195.5) 6.89(175.0) 2.95(75.0) 1.18(30.0) 3.34(84.7) 9.20(233.6) 5.91(150.0) 13.58(344.9) 14.61(371.1) 17.12( - Sanyo PLC-ZM5000L | Owners Manual - Page 89
: 1080p • Inputting signal formats: WUXGA 1, WXGA+2, UXGA 1, UXGA 2, UXGA 3, UXGA4, D-1080p Serial Control Interface This projector provides a function to control and monitor the projector's operations by using the RS-232C serial port. Operation 1 Connect - Sanyo PLC-ZM5000L | Owners Manual - Page 90
the projector with the format below; 'C' [Command] 'CR' Command: two characters (refer to the command table below. -The projector decodes Digital) Select Input 1 DVI (AV HDCP) Lens shift UP Lens shift DOWN Lens shift LEFT Lens shift RIGHT Auto PC adj. Keystone UP Keystone DOWN Keystone - Sanyo PLC-ZM5000L | Owners Manual - Page 91
to the projector with the format below; 'CR' [Command] 'CR' Command: one character (refer to the command table below. The projector decodes the 21 Cooling down after the projector is turned off when the lamps are out. 81 Stand-by mode after Cooling down when the lamps are out. 88 Stand- - Sanyo PLC-ZM5000L | Owners Manual - Page 92
KH2AL
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
 |
 |
Projection lens is optional.
Multimedia Projector
MODEL
PLC-ZM5000
PLC-ZM5000L
Network Supported
Refer to the Owner's Manual below for
details about network function.
□
Network Set-up and Operation
Owner’s Manual