Sanyo PLV-HD2000 RS232C Basic

Sanyo PLV-HD2000 - 7000 Lumens Manual

Get Sanyo PLV-HD2000 - 7000 Lumens PDF manuals and user guides
UPC - 086483060502
View all Sanyo PLV-HD2000 manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo PLV-HD2000 manual content summary:

  • Sanyo PLV-HD2000 | RS232C Basic - Page 1
    BASIC SERIAL COMMAND FUNCTIONAL SPECIFICATIONS LP-HD2000 SANYO Electric Co., Ltd Home Electronics Group AV Company Projector Business Unit
  • Sanyo PLV-HD2000 | RS232C Basic - Page 2
    PLV-HD2000 Basic Serial Command Functional Specifications CONTENTS 1 Overview...4 2 IDEO MUTE OFF Command 10 6.13 SCREEN NORMAL SIZE Command 10 6.14 SCREEN FULL SIZE Command 10 6.15 MENU ON Command 10 6.16 MENU OFF Command 11 6.30 LENS SHIFT UP Command 13 6.31 LENS SHIFT DOWN Command 13 2/24
  • Sanyo PLV-HD2000 | RS232C Basic - Page 3
    PLV-HD2000 Basic Serial Command Functional Specifications 6.32 LENS SHIFT LEFT Command 13 6.33 LENS SHIFT RIGHT Command 13 6.34 FULL LAMP MODE SET Command 14 6.35 HALF LAMP MODE 1 SET Command 14 6.36 HALF LAMP MODE 2 SET Command 14 6.37 AUTO PC ADJ. Command 14 7.
  • Sanyo PLV-HD2000 | RS232C Basic - Page 4
    defines projector control commands for PLV-HD2000. ・ The projector control commands are used to control a projector remotely Service Mode. 2.2 Connection Dedicated serial cables that come with a projector must be used for the connection between a computer and the projector. PC Projector
  • Sanyo PLV-HD2000 | RS232C Basic - Page 5
    PLV-HD2000 Basic Serial Command Functional Specifications 3 Notes for Communication ・ The projector command is defined as a single command per line that starts with "C" and ends with carriage return (0x0D). ・ When the projector ZOOM UP/DOWN] [FOCUS UP/DOWN] [LENS SHIFT UP/ DOWN/ LEFT/ RIGHT]
  • Sanyo PLV-HD2000 | RS232C Basic - Page 6
    PLV-HD2000 Basic Serial Command Functional Specifications 4. Functional Execution Command C5E C5F C60 C70 C71 C72 C89 FREEZE OFF ZOOM ZOOM + FOCUS FOCUS + LENS SHIFT UP LENS SHIFT DOWN LENS SHIFT LEFT LENS SHIFT RIGHT FULL LAMP MODE HALF LAMP MODE (Lamp1&4) HALF LAMP MODE (Lamp2&3) AUTO IMAGE 5.
  • Sanyo PLV-HD2000 | RS232C Basic - Page 7
    PLV-HD2000 Basic Serial Command Functional Specifications 6. Functional Execution Command Table 6.1 Format ・ PC issues a command in the format below: "C" Command [CR] Command: Two characters (Refer to Functional Execution Command Table) ・ A projector decodes the received data and returns the
  • Sanyo PLV-HD2000 | RS232C Basic - Page 8
    PLV-HD2000 Basic Serial Command Functional Specifications 6.4 Operation Requirements When a projector is in the following status, available Functional Execution Commands are limited. (in contrast Status Read Commands are valid even in these cases) Projector Status Available Functional Execution
  • Sanyo PLV-HD2000 | RS232C Basic - Page 9
    PLV-HD2000 Basic Serial Command Functional Specifications 6.5 POWER ON Command COMMAND "C00" [CR operation without displaying "Power OFF" message, unlike the operation with ON-OFF button of the projector or remote control. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.7 INPUT 1 Command
  • Sanyo PLV-HD2000 | RS232C Basic - Page 10
    PLV-HD2000 Basic Serial Command Functional Specifications 6.10 NPUT 4 Command COMMAND "C08" Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.14 SCREEN FULL SIZE Command COMMAND "C10" [CR] Detail Set screen size to Full Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.15 MENU
  • Sanyo PLV-HD2000 | RS232C Basic - Page 11
    PLV-HD2000 Basic Serial Command Functional Specifications 6.16 MENU OFF Command COMMAND "C1D" [CR of on-screen display Menu to the right This command works the same way as "►" button of the projector. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.20 POINTER LEFT Command COMMAND "C3B" [
  • Sanyo PLV-HD2000 | RS232C Basic - Page 12
    PLV-HD2000 Basic Serial Command Functional Specifications 6.22 POINTER DOWN Command COMMAND Detail Response "C3D" [CR] Move downward Pointer of on-screen display Menu This command works the same way as "▼" button of the projector. Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.23 ENTER Command
  • Sanyo PLV-HD2000 | RS232C Basic - Page 13
    PLV-HD2000 Basic Serial Command Functional Specifications 6.28 FOCUS + Command COMMAND "C4B" [CR] Detail Adjust the focus of the screen image with the focal-length longer(∞) (The lens is moved backward) This command works the same way as "F ▲" button of the remote control. Response Acceptable
  • Sanyo PLV-HD2000 | RS232C Basic - Page 14
    PLV-HD2000 Basic Serial Command Functional Specifications 6.34 FULL LAMP MODE SET Command COMMAND "C70" [CR] Detail Set all lamps to ON When switching from full-lamp mode (with 4 lamps ON) to 2-lamp mode, then to full-lamp again, or switching from 2-lamp to full the projector automatically
  • Sanyo PLV-HD2000 | RS232C Basic - Page 15
    PLV-HD2000 Basic Serial Command Functional Specifications 7. Status Read Command 7.1 Format ・ PC issues a command in the format as below: "CR" Command [CR] Command: a single character (Refer to Status Read Command Table) ・ When a projector receives the applicable command, it returns the required
  • Sanyo PLV-HD2000 | RS232C Basic - Page 16
    PLV-HD2000 Basic Serial Command Functional Specifications 7.3 Status Read Command COMMAND "CR0" [CR] Detail Get the projector status Acceptable "%1" [CR] Response "00" = Power ON "80" = Standby "40" = Countdown in process "20" = Cooling Down in process "10" = Power Failure %1 "28" =
  • Sanyo PLV-HD2000 | RS232C Basic - Page 17
    PLV-HD2000 Basic Serial Command Functional Specifications ・ "10" [CR] Status: Power Failure When the power supply voltage inside the projector reaches abnormal level, the status moves to Power OFF automatically. The projector returns "10" [CR], which indicates it has moved to Power OFF status due to
  • Sanyo PLV-HD2000 | RS232C Basic - Page 18
    PLV-HD2000 Basic Serial Command Functional Specifications ・ "21" [CR] Status: Cooling Down in process after turn-off operation due to Lamp Failure When the lamp fails to be turned on, projector automatically moves to Cooling Down status. "21" [CR] is returned in this case. ・ "81" [CR] Status:
  • Sanyo PLV-HD2000 | RS232C Basic - Page 19
    PLV-HD2000 Basic Serial Command Functional Specifications 7.4 Input Mode Read Command COMMAND "CR1" [CR] Detail Get the selected INPUT Acceptable "%1" [CR] Response "1" = INPUT1 is selected %1 "2" = INPUT2 is
  • Sanyo PLV-HD2000 | RS232C Basic - Page 20
    PLV-HD2000 Basic Serial Command Functional Specifications 7.8 Temp Read Command COMMAND "CR6" [CR] Detail Get the temperature information inside the projector With more than one temperature sensor installed in the projector temperature data returns due to hardware problems, it %1 %2 starts with
  • Sanyo PLV-HD2000 | RS232C Basic - Page 21
    PLV-HD2000 Basic Serial Command Functional Specifications 7.10 PC Type Read Command COMMAND "CR9" [CR] Detail Get currently projected PC mode Acceptable "%1" [CR] Response "Standby Standby "AV_Mode
  • Sanyo PLV-HD2000 | RS232C Basic - Page 22
    PLV-HD2000 Basic Serial Command Functional Specifications 8. Command with Address Specification 8.1 Overview ・ Commands with address are used to remotely control more than one projector through RS-232C by a computer. ・ The command with address is defined as a single command per line that starts with
  • Sanyo PLV-HD2000 | RS232C Basic - Page 23
    PLV-HD2000 Basic Serial Command Functional Specifications 8.2 Functional Execution Command with address 8.2.1 " as the address are available for all projectors. Command: string (Refer to Basic Commands or Expand Commands) ・ The only projector with the appropriate address decodes the received command
  • Sanyo PLV-HD2000 | RS232C Basic - Page 24
    PLV-HD2000 Basic Serial Command Functional Specifications 8.3 Status Read Command with Address 8.3.1 - "999") Command: string (Refer to Basic Commands or Expand Commands) ・ When the only projectors that have the address matching with the one in the received data decode the received command, and
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
BASIC SERIAL COMMAND
FUNCTIONAL SPECIFICATIONS
LP-HD2000
SANYO Electric Co., Ltd
Home Electronics Group
AV Company
Projector Business Unit