Sanyo PLV-HD2000 RS232C Expand

Sanyo PLV-HD2000 - 7000 Lumens Manual

Get Sanyo PLV-HD2000 - 7000 Lumens PDF manuals and user guides
UPC - 086483060502
View all Sanyo PLV-HD2000 manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo PLV-HD2000 manual content summary:

  • Sanyo PLV-HD2000 | RS232C Expand - Page 1
    EXPAND SERIAL COMMAND FUNCTIONAL SPECIFICATIONS PLV-HD2000 SANYO Electric Co., Ltd Home Electronics Group AV Company Projector Business Unit
  • Sanyo PLV-HD2000 | RS232C Expand - Page 2
    PLV-HD2000 Expand Serial Command Functional Specifications CONTENTS 1． Overview ...4 2． Serial Interface Specification 4 2.1. Communication Specification 4 2.2. Connection ...4 3． Note for communication 5 4． Name Definition ...5 5． Functional Execution Command Table 6 5.1. Image Command Table 6
  • Sanyo PLV-HD2000 | RS232C Expand - Page 3
    PLV-HD2000 Expand Serial Command Functional Specifications 9.5. Status Read Command for Video 38 9.6. Input Status Read Command 39 9.7. Screen Status Read Command 45 9.8. Lamp Status Read Command
  • Sanyo PLV-HD2000 | RS232C Expand - Page 4
    Overview ・ This Functional Specification defines communication functions to Network card for PLV-HD2000. ・ The Commands are designed to communicate with Network board, but most commands can be used to remote-control a projector through RS-232C from a computer. Therefore these commands are defined as
  • Sanyo PLV-HD2000 | RS232C Expand - Page 5
    . Do not issue any command. ・ Serial Commands are invalid when Service Mode or Special menu is displayed. 4． Name Definition ・ Data from a controller to a projector is represented as COMMAND, and data from a projector to a controller for the incoming command is represented as RESPONSE. ・ [CR
  • Sanyo PLV-HD2000 | RS232C Expand - Page 6
    PLV-HD2000 Expand Serial Command Functional Specifications 5． Functional Execution Command Table 5.1. Image Command Table Execute command CF_BRIGHT_%1 [CR] CF_CONT_%1 [CR] CF_COLOR_%1 [CR] CF_TINT_%1 [CR] CF_SHARP_%1 [CR] CF_GAMMA_%1 [
  • Sanyo PLV-HD2000 | RS232C Expand - Page 7
    PLV-HD2000 Expand Serial Command Functional Specifications 5.4. Screen Command Table Execute command CF_SCREEN_%1 [ CF_AUTOLAMPCONTRL_%1 [CR] Item Reset total running time of each lamp Select lamp mode (Full/Half) Switch ON/OFF of auto lamp control 5.6. Setting Command Table Execute command
  • Sanyo PLV-HD2000 | RS232C Expand - Page 8
    PLV-HD2000 Expand Serial Command Functional Specifications 6． Status Read Command Table 6.1. Image Status Read Command Table Status read command CR_BRIGHT [CR] CR_CONT [CR] CR_COLOR [CR] CR_TINT [CR]
  • Sanyo PLV-HD2000 | RS232C Expand - Page 9
    PLV-HD2000 Expand Serial Command Functional Specifications 6.4. Input Status Read Command Table Status read command Item CR_INPUT [CR] status CR_INFLAMP [CR] Get Lamp switching status CR_PROJH [CR] Get total running time of the projector CR_HMLAMP [CR] Get the total number of lamps 9/56
  • Sanyo PLV-HD2000 | RS232C Expand - Page 10
    PLV-HD2000 Expand Serial Command Functional Specifications 6.7. Setting Status Read Command Table Status read command Item CR_BBACK [CR] Get setting status The command is not available to the hardware (the command is for the optional function which is not supported by the given hardware) 10/56
  • Sanyo PLV-HD2000 | RS232C Expand - Page 11
    PLV-HD2000 Expand Serial Command Functional Specifications 8． Functional Execution Command 8.1. Format 1. Command: String %1: Parameter (string) _: Space (To separate Command and Parameter) 2. The projector decodes the received data and when it gets ready to receive the next command, it returns the
  • Sanyo PLV-HD2000 | RS232C Expand - Page 12
    PLV-HD2000 Expand Serial Command Functional Specifications 8.4. Image Command 8.4.1. CF_ BRIGHT Command Command " in the normal Power ON status) The value set by this command is not stored in the projector's memory. Therefore, when the power is turned to ALL OFF status, the value returns to the
  • Sanyo PLV-HD2000 | RS232C Expand - Page 13
    PLV-HD2000 Expand Serial Command Functional Specifications 8.4.5. CF_SHARP Command Command "CF_SHARP_%1" [CR] "000 in the normal Power ON status) The value set by this command is not stored in the projector's memory. Therefore, when the power is turned to ALL OFF status, the value returns to the
  • Sanyo PLV-HD2000 | RS232C Expand - Page 14
    PLV-HD2000 Expand Serial Command Functional Specifications 8.4.8. CF_COLTEMP Command Command "CF_COLTEMP_%1" [CR] "000 XLow %1 "001 Low "002 Mid "003 High ON status) The value set by this command is not stored in the projector's memory. Therefore, when the power is turned to ALL OFF status,
  • Sanyo PLV-HD2000 | RS232C Expand - Page 15
    PLV-HD2000 Expand Serial Command Functional Specifications 8.4.11. CF_IMAGE Command Command "CF_IMAGE_%1" a user) Details Select Image Mode (valid only when it is in the normal Power ON status) Parameter "CUSTOM1" to "CUSTOM10" corresponds to "Image1" to "Image10" displayed in the projector OSD
  • Sanyo PLV-HD2000 | RS232C Expand - Page 16
    PLV-HD2000 Expand Serial Command Functional Specifications 8.4.13. CF_APCTRL Command Command "CF_APCTRL_%1" [CR] "L1 Set Auto Picture Control to Level 1. %1 "L2 Set Auto Picture Control to Level 2. "
  • Sanyo PLV-HD2000 | RS232C Expand - Page 17
    PLV-HD2000 Expand Serial Command Functional Specifications 8.5. Display Control Command 8.5.1. CF_FSYNC Command is in the normal Power ON status) The value set by this command is not stored in projector's memory. Therefore, when the power is turned to ALL OFF status, the value returns to the
  • Sanyo PLV-HD2000 | RS232C Expand - Page 18
    PLV-HD2000 Expand Serial Command Functional Specifications 8.5.4. CF_H-POS Command Command "CF_H-POS_%1" [CR] it is in the normal Power ON status) The value set by this command is not stored in projector's memory. Therefore, when the power is turned to ALL OFF status, the value returns to the
  • Sanyo PLV-HD2000 | RS232C Expand - Page 19
    PLV-HD2000 Expand Serial Command Functional Specifications 8.5.6. CF_DLINE Command Command "CF_DLINE_%1" [CR] " it is in the normal Power ON status) The value set by this command is not stored in projector's memory. Therefore, when the power is turned to ALL OFF status, the value returns to the
  • Sanyo PLV-HD2000 | RS232C Expand - Page 20
    PLV-HD2000 Expand Serial Command Functional Specifications 8.5.8. CF_SETDISPADJ Command Command "CF_SETPCADJ_%1" [CR] "PAL" "SECAM" %1 "XGA1" "1080I60 "MODE16" "EXT24 Etc. Details Apply the values set in Display adjust
  • Sanyo PLV-HD2000 | RS232C Expand - Page 21
    PLV-HD2000 Expand Serial Command Functional Specifications 8.5.10. CF_MODESTORE Command Command "CF_MODESTORE_%1" [CR] "1 Store current Display adjust status to Mode1 "2 Store current Display adjust status to Mode2 "3
  • Sanyo PLV-HD2000 | RS232C Expand - Page 22
    PLV-HD2000 Expand Serial Command Functional Specifications 8.6. Input Control Command 8.6.1. CF_INPUT Command Command "CF_INPUT_%1" Power ON status) The same operation as "INPUT1"-"INPUT4" buttons of the projector and the remote control. Acceptable Response "000" [CR] Unacceptable "Error Code
  • Sanyo PLV-HD2000 | RS232C Expand - Page 23
    PLV-HD2000 Expand Serial Command Functional Specifications 8.6.3. CF_INPUT1~4 Command Command "CF_INPUT1_%1_%2" [CR] "1 Specify Input 1 %1 "2 Specify Input 2 "3 Specify Input 3 "4 Specify Input 4 "DIGITAL Select DVI Digital Input for
  • Sanyo PLV-HD2000 | RS232C Expand - Page 24
    PLV-HD2000 Expand Serial Command Functional Specifications 8.6.4. CF_SYSTEM Command Command "CF_SYSTEM_%1" [CR] Input is PC "VGA1 Select VGA1 "VGA2 Select VGA2 : : "D-WXGA3 Select D-WXGA3 "D-WXGA4 Select D-WXGA4 "
  • Sanyo PLV-HD2000 | RS232C Expand - Page 25
    PLV-HD2000 Expand Serial Command Functional Specifications 8.7. Screen Control Command 8.7.1. CF_SCREEN Command Command "CF_SCREEN_%1" [CR] "NORMAL Select Normal mode %1 "FULL Select Full mode "ANAMORPHIC Select Anamorphic mode Details Select Screen size (valid only when it is in the
  • Sanyo PLV-HD2000 | RS232C Expand - Page 26
    PLV-HD2000 Expand Serial Command Functional Specifications 8.7.4. CF_HSCALE Command Command "CF_HSCALE_%1" [CR] "032 32 "031 31 : "002 2 "001 1 "000 0 %1 "-01 1 "-02 2 : "-31 31 "-32 32 "UP Increment H
  • Sanyo PLV-HD2000 | RS232C Expand - Page 27
    PLV-HD2000 Expand Serial Command Functional Specifications 8.8. Lamp Command 8.8.1. CF_LAMPH Command Command "CF_LAMPH_%1" [ by this command is stored in EEPROM of the projector, so its setting is effective even after the power is turned to ALL OFF status. Full mode means 4 lamps are lit, while 3L
  • Sanyo PLV-HD2000 | RS232C Expand - Page 28
    PLV-HD2000 Expand Serial Command Functional Specifications 8.9. Setting Command 8.9.1. CF_BBACK Command the normal Power ON status) The status set by this command is stored in EEPROM of the projector, so its setting is effective even after the power is turned to ALL OFF status. Acceptable Response
  • Sanyo PLV-HD2000 | RS232C Expand - Page 29
    PLV-HD2000 Expand Serial Command Functional Specifications 8.9.5. CF_REAR Command Command " in the normal Power ON status) The language set by this command is stored in EEPROM of the projector, so the selected language is effective even after the power is turned to ALL OFF status. Acceptable
  • Sanyo PLV-HD2000 | RS232C Expand - Page 30
    PLV-HD2000 Expand Serial Command Functional Specifications 8.9.9. CF_P-MANE Command Command " in the normal Power ON status). The status set by this command is stored in EEPROM of the projector, so its setting is effective even after the power is turned to ALL OFF status. Acceptable Response
  • Sanyo PLV-HD2000 | RS232C Expand - Page 31
    PLV-HD2000 Expand Serial Command Functional Specifications 8.9.13. CF_FDEFAULT Command Command "CF_FDEFAULT_%1" [CR] %1 "RST" Details Set Factory Default setting values (valid only when it is in the normal Power ON status) Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 31/56
  • Sanyo PLV-HD2000 | RS232C Expand - Page 32
    PLV-HD2000 Expand Serial Command Functional Specifications 9． Status Read Command 9.1. Format 1. PC issues a command in the format below: "CR_ Command" [CR] Command: String 2. When a projector receives the applicable command, it returns required data as a string. "000_" %1 [CR] %1: Required data (
  • Sanyo PLV-HD2000 | RS232C Expand - Page 33
    PLV-HD2000 Expand Serial Command Functional Specifications 9.3. Image Status Read Command 9.3.1. CR_BRIGHT Command Command "CR_BRIGHT" [CR] Details Get value of Brightness Acceptable Response %1 "000_%1" [CR] "000" - "063"
  • Sanyo PLV-HD2000 | RS232C Expand - Page 34
    PLV-HD2000 Expand Serial Command Functional Specifications 9.3.7. CR_WBAL-R Command Command "CR_WBAL-R" [CR] Details Get Red value of Color Temp. Acceptable "000_%1" [CR] "000 Xlow "001 Low Response %1 "002 Mid "003 High "BLANK" ---- OSD Menu is blank (Neither of Xlow / Low / Mid
  • Sanyo PLV-HD2000 | RS232C Expand - Page 35
    PLV-HD2000 Expand Serial Command Functional Specifications 9.3.11. CR_NZRED Command Command "CR_NZRED" [CR] Details Get setting status of Noise Reduction Acceptable "000_%1" [CR] "OFF Noise Reduction is
  • Sanyo PLV-HD2000 | RS232C Expand - Page 36
    PLV-HD2000 Expand Serial Command Functional Specifications 9.3.15. CR_APCTRL Command Command "CR_APCTRL" [CR] Details Get setting status of Auto Picture Control Acceptable "000_%1" [CR] "L1 Auto Picture
  • Sanyo PLV-HD2000 | RS232C Expand - Page 37
    PLV-HD2000 Expand Serial Command Functional Specifications 9.4.4. CR_H-POS Command Command "CR_H-POS" [CR] Details Get value of Horizontal Position Acceptable "000_%1" [CR] Input is Computer Response %1
  • Sanyo PLV-HD2000 | RS232C Expand - Page 38
    PLV-HD2000 Expand Serial Command Functional Specifications 9.4.8. CR_ORGMODE Command Command "CR_ORGMODE" [CR] Details Get the original signal of the currently selected Mode set in Display adjust menu
  • Sanyo PLV-HD2000 | RS232C Expand - Page 39
    PLV-HD2000 Expand Serial Command Functional Specifications 9.6. Input Status Read Command 9.6.1. CR_INPUT Command Command "CR_INPUT" [CR] Details Get selected Input No. Acceptable Response %1 "000_%1" [CR] "1" - "4" Unacceptable "Error
  • Sanyo PLV-HD2000 | RS232C Expand - Page 40
    PLV-HD2000 Expand Serial Command Functional Specifications 9.6.3. CR_SRCINP1 Command Command "CR_SRCINP1" [CR] Details Get Source of Input 1 Acceptable "000_%1" [CR] "DIGITAL DVI Digital Input is selected "ANALOG
  • Sanyo PLV-HD2000 | RS232C Expand - Page 41
    PLV-HD2000 Expand Serial Command Functional Specifications 9.6.7. CR_SYSTEM Command Command "CR_SYSTEM" [CR] Details Get selected System Acceptable "000_%1" [CR] Input is PC "VGA1 VGA1 is selected "VGA2
  • Sanyo PLV-HD2000 | RS232C Expand - Page 42
    PLV-HD2000 Expand Serial Command Functional Specifications 9.6.8. CR_SYSLIST Command Command "CR_SYSLIST" [CR] Details Get possible systems in the list Acceptable "000_%1_%2 x" [CR] (e.g.) "AUTO Auto is in
  • Sanyo PLV-HD2000 | RS232C Expand - Page 43
    PLV-HD2000 Expand Serial Command Functional Specifications 9.6.12. CR_NMSLOT2 Command Command "CR_NMSLOT2" [CR] Details Get a slot board name inserted to Input 2 Acceptable "000_%1" [CR] Response %1 The same
  • Sanyo PLV-HD2000 | RS232C Expand - Page 44
    PLV-HD2000 Expand Serial Command Functional Specifications 9.6.16. CR_IDSLOT2 Command Command "CR_IDSLOT2" [CR] Details Get ID information of Input 2. This command is used to recognize the inserted
  • Sanyo PLV-HD2000 | RS232C Expand - Page 45
    PLV-HD2000 Expand Serial Command Functional Specifications 9.7. Screen Status Read Command 9.7.1. CR_SCREEN Command Command "CR_SCREEN" [CR] Details Get currently selected screen image mode Acceptable "000_%1" [CR] "NORMAL Normal mode Response %1 "FULL Full mode "ANAMORPHIC Anamorphic
  • Sanyo PLV-HD2000 | RS232C Expand - Page 46
    PLV-HD2000 Expand Serial Command Functional Specifications 9.8. Lamp Status Read Command 9.8.1. CR_LAMPREPL Command Command "CR_LAMPREPL Get setting status of Lamp mode Acceptable "000_%1" [CR] Response %1 "FULL 4-lamp mode is selected. "HALF 2-lamp mode is selected Unacceptable "Error
  • Sanyo PLV-HD2000 | RS232C Expand - Page 47
    PLV-HD2000 Expand Serial Command Functional Specifications 9.8.4. CR_LAMPSTS Command Command CR_LAMPSTS" [CR] [CR] 9.8.6. CR_PROJH Command Command "CR_PROJH" [CR] Details Get total running time of Projector by hour (h) Acceptable Response %1 "000＿％1" ｢CR｣ "0000000" - "0065535" Unacceptable
  • Sanyo PLV-HD2000 | RS232C Expand - Page 48
    PLV-HD2000 Expand Serial Command Functional Specifications 9.9. Setting Status Read Command 9.9.1. CR_BBACK Command Command "CR_BBACK" [CR] Details Get setting status of Blue Back Acceptable "000_%1" [CR] Response %1 "
  • Sanyo PLV-HD2000 | RS232C Expand - Page 49
    PLV-HD2000 Expand Serial Command Functional Specifications 9.9.5. CR_LANG Command Command "CR_LANG" [CR] Details Get currently selected language Acceptable "000_%1" [CR] "ENG English is selected "DEU German is
  • Sanyo PLV-HD2000 | RS232C Expand - Page 50
    PLV-HD2000 Expand Serial Command Functional Specifications 9.9.9. CR_FANSPEED Command Command "CR_FANSPEED" [CR] Details Get currently selected Fan Control Speed Acceptable "000_%1" [CR] Response %1 "MAX Fan Control Speed
  • Sanyo PLV-HD2000 | RS232C Expand - Page 51
    PLV-HD2000 Expand Serial Command Functional Specifications 9.10. Other Status Read Command 9.10.1. CR_PRESSURE Command Command "CR_PRESSURE" [CR] Details Get value from Air Pressure sensor Following is
  • Sanyo PLV-HD2000 | RS232C Expand - Page 52
    PLV-HD2000 Expand Serial Command Functional Specifications 9.10.5. CR_INFPFAIL Command Command "CR_INFPFAIL" [CR] Details Get the power failure status (Normal/Fail) at each check point. Data consists
  • Sanyo PLV-HD2000 | RS232C Expand - Page 53
    PLV-HD2000 Expand Serial Command Functional Specifications 9.10.6. CR_TEMPWARN Command Command "CR_TEMPWARN" [CR] Details Get the information about the temperature inside the projector (close to/in the abnormal status, in the safe temerature level or sensor not detect abnormal temperature). It
  • Sanyo PLV-HD2000 | RS232C Expand - Page 54
    PLV-HD2000 Expand Serial Command Functional Specifications 10． Command with Address Specification 10.1. Overview - Commands with address are used to remote control more than one projectors : "A001CR0" [CR] - Projector has the function to set up its own address in Service mode. ・ Initial setting value
  • Sanyo PLV-HD2000 | RS232C Expand - Page 55
    PLV-HD2000 Expand Serial Command Functional Specifications 10.2. Functional Execution Command with address "FFF" as the address are valid to all projectors. Command: string (Refer to Basic and Expand Serial Command) 2) The only projector with the appropriate address decodes the received command, and
  • Sanyo PLV-HD2000 | RS232C Expand - Page 56
    PLV-HD2000 Expand Serial Command Functional Specifications 10.3. Status Read Command with Address 10 - "999") Command: string (Refer to Basic and Expand Serial Command) 2) The only projector with appropriate address decodes the received commands and returns the character line as the required data.
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
EXPAND SERIAL COMMAND
FUNCTIONAL SPECIFICATIONS
PLV-HD2000
SANYO Electric Co., Ltd
Home Electronics Group
AV Company
Projector Business Unit