Sanyo POA-CH-EX06 Installation Manual
Sanyo POA-CH-EX06 Manual
 |
View all Sanyo POA-CH-EX06 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sanyo POA-CH-EX06 manual content summary:
- Sanyo POA-CH-EX06 | Installation Manual - Page 1
10 Dimensions 11 Be sure to consult with a qualified installation specialist. This installation manual describes how to mount the projector to a wall using the setting plate (model POA-CH-EX06). This setting plate is only for use with Sanyo projectors mentioned below. ¡ PDG-DWL2500, PDG-DXL2000 and - Sanyo POA-CH-EX06 | Installation Manual - Page 2
Instructions ■ Explanation of Symbols The warning marks shown below are used in this manual to prevent personal injury or property damage. Make sure you understand these warnings when reading this installation manual plate is only for use with specified Sanyo projector. Do not use for any other - Sanyo POA-CH-EX06 | Installation Manual - Page 3
English Safety Instructions The installation work should be performed by at least two qualified service personnel. If you need to loosen any screws during installation, be careful not to drop the setting plate. If mounting the projector on a wall with the setting plate, the wall must have enough - Sanyo POA-CH-EX06 | Installation Manual - Page 4
and wall plate) . . . 4 i M5 x 10 mm hexagon socket head cap bolt (for securing cover plates 2 o Strap for binding cables 2 !0 Drop-prevention wire 1 !1 Template sheet for installing the wall plate . . 1 !2 Installation Manual (this manual 1 3 10"$)&9 *+") JOEC - Sanyo POA-CH-EX06 | Installation Manual - Page 5
sheet for installing the wall plate Center line of the projection surface H Projection surface 2 Attach the template sheet to the wall. 3 Make mounting holes in places.) ¡ Sanyo takes no responsibility for any damages or injury caused by incorrect installation. 4 10"$)&9 *+") JOEC - Sanyo POA-CH-EX06 | Installation Manual - Page 6
Installation Procedure Attach the setting plate to the wall plate 1 Hang the setting plate hook onto the wall plate slits. Wall plate Setting plate 2 Tighten the - Sanyo POA-CH-EX06 | Installation Manual - Page 7
English Installation Procedure Securing the projector to the setting plate 1 Attach the adjustment unit to the projector using the included 5 screws (M4 x 18). Screws Adjustment unit Projector 2 - Sanyo POA-CH-EX06 | Installation Manual - Page 8
Installation Procedure Adjustment 1 Adjust the forward/backward slide (Adjustable range: 0 - 180 mm) ¡ Loosen the four bolts on the top of the setting plate using a hexagon wrench (3 - Sanyo POA-CH-EX06 | Installation Manual - Page 9
English Installation Procedure 4 Adjust the vertical tilt (Adjustable range: +5° - -5°) ¡ Loosen the screw q located on the left side of the setting plate using the hexagon wrench (3 mm). ¡ Turn - Sanyo POA-CH-EX06 | Installation Manual - Page 10
projector and the setting plate. 1 Pass the included drop-prevention wire through the drop-prevention wire installation bar of the projector as shown in the illustration. Drop-prevention wire Drop-prevention wire installation bar 2 Pass the wire through the holes of the setting plate as shown in the - Sanyo POA-CH-EX06 | Installation Manual - Page 11
.3) 50.86" (129.2) 47.71" (121.2) 46.10" (117.1) 42.40" (107.7) 41.33" (105.0) 39.52" (100.4) 37.08" (94.2) 31.81" (80.8) ●SANYO PDG-DXL2000 Display Size A 90" (4 : 3) 87" (4 : 3) 20.74" (52.7) 20.11" (51.1) 80" (4 : 3) 18.66" (47.4) 78" (4 : 3) 18.22" (46.3) 70" (4 : 3) 64" (4 : 3) 16.53 - Sanyo POA-CH-EX06 | Installation Manual - Page 12
15.83 (402) 15.16 (385) Dimensions 18.23 (463) Unit: inch (mm) 22.24 (565) max. 15.16 (385) 13.51 (321) 1.06 (27) 14.88 (378) 6.85 (174) 6.69 (170) 11 10"$)&9 *+") JOEC 6.45 (164) Center line of the projection surface
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
 |
 |
Installation Manual
Setting Plate for Wall Hanging
Model
POA-CH-EX06
Contents
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
List of Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Install the wall plate to the wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Attach the setting plate to the wall plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Securing the projector to the setting plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Attach the drop-prevention wire to the projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Projection Distance Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
This installation manual describes how to mount the projector to a wall using
the setting plate (model POA-CH-EX06).
This setting plate is only for use with Sanyo projectors mentioned below.
PDG-DWL2500, PDG-DXL2000 and other related models. (For details on available models,
¡
please contact your nearest Sanyo dealer.)
Be sure to consult with a qualified installation specialist.
English
Français
Español
Deutsch
Italiano
Português
日本語
POA-CH-EX06(IJAH).indb a
POA-CH-EX06(IJAH).indb
a
10.9.8 11:21:12 AM
10.9.8
11:21:12 AM