Sanyo XC55 Instruction Manual, PLC-XC55
Sanyo XC55 - PLC XGA LCD Projector Manual
 |
UPC - 086483072079
View all Sanyo XC55 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sanyo XC55 manual content summary:
- Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 1
Multimedia Projector MODEL PLC-XC50 PLC-XC55 Owner's Manual - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 2
Replacement Function The projector monitors the condition of the filter and replaces a filter automatically when it detects the clogging. Notes: • The On-Screen Menu and figures in this manual may differ slightly from the product. • The contents of this manual are subject to change without notice - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 3
Instructions 57 Replacing the Filter Cartridge 58 Resetting the Filter Counter 59 Resetting the Scroll Counter 59 Lamp Replacement 60 Resetting the Lamp Counter 62 Warning TEMP. indicator 63 Cleaning the Lens Cover 64 Cleaning the Projector Cabinet 64 Appendix 65 Troubleshooting - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 4
this manual. If the problem still persists, contact the dealer where you purchased the projector or the service center. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 5
. Use only with a cart or stand recommended by the manufacturer, or sold with the projector. Wall or shelf mounting should follow the manufacturer's instructions, and should use a mounting kit approved by the manufacturers. An appliance and cart combination should be moved with care. Quick stops - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 6
exhaust) Air flow Air Intake Vent Installing the Projector in Proper Position Install the projector properly. Improper Installation may reduce the lamp life and cause a fire hazard. Do not point the projector up to project an image. Do not point the projector down to project an image. Do not put - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 7
instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Model Number Trade Name Responsible party Address : PLC-XC50 / PLC-XC55 : Sanyo : SANYO from the Parts Department indicated in your User Instructions. If the plug supplied is not - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 8
-sensitive objects near this side. ⑨ Lamp Cover ⑩ Speaker ⑪ Top Controls and Indicators ⑫ Terminals and Connectors ⑬ Filter Cover ⑭ Adjustable feet Kensington Security Slot This slot is for a Kensington lock used to deter theft of the projector. - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 9
Rear Terminal ① ② ③ Part Names and Functions ④ ⑤ ⑥ ⑨ ⑧⑦ ① CONTROL PORT When the projector is controlled by a computer, connect to this jack with serial control cable. ② COMPUTER IN 2 / COMPONENT IN Connect output signal from a computer, RGB scart 21-pin - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 10
the life of the projection lamp draws to an end. (pp.60, 71-72) ③ WARNING TEMP. indicator Emit a red light when the projector detects an abnormal condition. This also blinks red when the internal temperature of the projector exceeds the operating range. (pp.63, 71-72) ④ WARNING FILTER indicator - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 11
thinner, spray or any chemical material. ① POWER ON/STAND-BY button Turn the projector on or off. (pp.18, 19) ② COMPUTER 2 button Select COMPUTER 2 button Temporarily turn off the image on the screen. (p.24) ⑭ LAMP CONTROL button Select the lamp mode. (pp.24, 51) ⑮ MUTE button Mute the sound. - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 12
● Risk of explosion if a battery is replaced by an incorrect type. ● Dispose of used batteries according to the instructions. Operating Range Point the remote control toward the projector (Infrared Remote Receiver) when pressing any button. Maximum operating range for the remote control is about 16 - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 13
the adjustable feet and rotate the adjustable feet to adjust the position and tilt. 3 To retract the adjustable feet, lift the front of the projector and push and undo the feet lock latches. Keystone distortion of the projected image can be corrected with the remote control or menu operation. (pp - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 14
• VGA Cables (Mini D-sub 15 pin) (Only one cable is supplied.) • Audio Cables (Mini Plug: stereo) ( Not all the cables are supplied with this projector.) Audio Output Monitor Output Monitor Input Monitor Output VGA cable VGA cable DVI cable DVI-VGA cable Audio cable COMPUTER IN 2 MONITOR OUT - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 15
• Video and Audio Cable (RCA x 3) • S-video Cable • Audio Cables (RCA x 2, Mini Plug: stereo) (Cables are not supplied with the projector.) Installation S-video Output (R) (L) Composite Video and Audio Output (R) (L) (Video) External Audio Equipment S-video cable Audio cable (stereo) Video and - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 16
used for connection • Audio Cables (Mini Plug :stereo) • Scart-VGA Cable • Component Cable • Component-VGA Cable (Cables are not supplied with the projector.) RGB Scart Component Video Output 21-pin Output (Y, Pb/Cb, Pr/Cr) Component cable Audio Output External Audio Equipment Scart-VGA cable - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 17
into any other type of power system. Consult your authorized dealer or service station if you are not sure of the type of power being supplied. Connect the projector with all peripheral equipment before turning the projector on. (See pages 14-16 for connection) Installation CAUTION The AC outlet - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 18
your dealer or service center. 18 16 The preparation display disappears after 30 seconds. Selected Input Source and Lamp Mode Lamp mode (See page 51 for Lamp mode.) Note: The Filter warning and Lamp replacement icons may appear on the screen depending on the usage state of the projector. PIN Code - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 19
after 4 seconds. TO MAINTAIN THE LIFE OF THE LAMP, ONCE YOU TURN THE PROJECTOR ON, WAIT AT LEAST FIVE MINUTES BEFORE TURNING IT OFF. DO NOT OPERATE THE PROJECTOR CONTINUOUSLY WITHOUT REST.CONTINUOUS USE MAY RESULT IN SHORTENTING THE LAMP LIFE.TURN OFF THE PROJECTOR AND GIVE IT A REST ABOUT AN - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 20
Basic Operation How to Operate the On-Screen Menu The projector can be adjusted or set via the On-Screen Menu. Refer to the following pages regarding each adjustment and setting procedures. 1 Press the MENU button - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 21
Menu Bar For detailed functions, see Menu Tree on pages 68-70. For computer source Guide Window PC System Menu Show the selected U s e d t o s e l to adjust size of U s e d t o s e t t h e image. [Normal / True projector's operating / Wide / Full / Custom configurations. / D i g i t a l z o o m - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 22
Keystone Correction If a projected picture still has keystone distortion after pressing the AUTO SETUP button on the top control, correct the image manually as follows: Press the KEYSTONE button on the remote control. The keystone dialog box appears. Correct keystone distortion by pressing the Point - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 23
Basic Operation Sound Adjustment Direct Operation Volume Press the VOLUME+/- buttons on the top control or on the remote control to adjust the volume. The volume dialog box appears on the screen for a few seconds. Mute Press the MUTE button on the remote control to cut off the sound. To restore the - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 24
button. When a projected image is captured and set as "User" in the Logo selection (p.48), the screen changes each l a m p power consumption and extends the lamp life. Note: Lamp mode cannot be changed for a while after turning on the projector. Lamp needs some time to stabilize after the power is - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 25
Computer Input Input Source Selection (RGB: Computer 1 (Analog)/Computer 2 ) Direct Operation Choose Computer 1 (Analog) or Computer 2 by pressing the INPUT button on the top control or choose Computer 1(Analog) by pressing the COMPUTER 1 button on the remote control or choose computer 2 by - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 26
Interface) from being copied. The specification of HDCP is decided and controlled by Digital Content Protection, LLC. Should the specification be changed, this projector may not display the digital content protected by HDCP. • When the Input Search function is set On1 or On2, the input signal will - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 27
XGA, SXGA, WXGA, or UXGA with its Multi-scan system and Auto PC Adjustment. If Computer is selected as a signal source, this projector the connection between your computer and the projector. (See "Troubleshooting" on pages 65-67.) Mode 1 The preset system is manually adjusted in the PC Adjust Menu. - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 28
parameters Adjustment parameters from Auto PC Adjustment can be memorized in this projector. Once parameters are memorized, the setting can be done just by function. When the image is not provided properly with this operation, manual adjustments are required. (pp.29-30) • The Auto PC Adjustment - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 29
PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has 5 independent memory areas to memorize those parameters manually adjusted. It allows you to recall the setting for a specific computer. 1 Press the MENU button to display the On-Screen - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 30
. Press the Point ◄► buttons to decrease/increase the value. Display area V Adjust the vertical area displayed by this projector. Press the Point ◄► buttons to decrease/increase the value. Reset To reset the adjusted data, select Reset and press the SELECT button. The confirmation box - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 31
in a bright room. Standard Normal picture level preset on this projector. Real Picture level with improved halftone for graphics. Blackboard (Green) similar color to the wall color from the preset four colors. Image 1 ~ 4 User preset image in the Image Adjust Menu. (pp.33-34) Remote Control IMAGE - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 32
a bright room. Standard Normal picture level preset on this projector. Real Picture level with improved halftone for graphics. Blackboard (Green preset four colors. Press the SELECT button to choose the color. Image 1 ~ 4 User preset image in the Image Adjust Menu. (pp.33-34) Image Select Menu icon - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 33
Computer Input Image Level Adjustment 1 Press the MENU button to display the On-Screen Menu. Press the Point ◄► buttons to move the red frame pointer to the Image Adjust Menu icon. 2 Press the Point ▲▼ buttons to move the red frame pointer to the item that you want to adjust, and then press the - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 34
than 1600x1200. If your computer's screen resolution is higher than it, reset the resolution to the lower before connecting to the projector. • The image data in other than XGA (1024x768) is modified to fit the screen size in initial mode. • True, Full, and Digital zoom +/- cannot be selected when - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 35
. This function can be used for providing a squeezed video signal at 16:9. Full Provide the full screen image. Custom Adjust the screen scale and position manually with this function. Press the SELECT button at Custom and the "Custom" is displayed on the screen for a few seconds and then the Aspect - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 36
Computer Input 1 2 For zooming in and out the images Digital zoom + When the Digital zoom + is selected, the On-Screen Menu disappears and the message "D. zoom +" is displayed. Press the SELECT button to expand the image size. And press the Point buttons to pan the image. The Panning function - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 37
Video Input Input Source Selection (Video, S-video) Direct Operation Choose Video by pressing the INPUT button on the top control or choose Video by pressing the VIDEO button or choose S-video by pressing the S-video button on the remote control. Before using these buttons, correct input source - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 38
Video Input Input Source Selection (Component, RGB Scart 21-pin) Direct Operation Choose Computer 2 by pressing the INPUT button on the top control or press the COMPUTER 2 button on the remote control. Choose Component by pressing COMPONENT button on the remote control. Before using these buttons, - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 39
video system, and adjusts itself to optimize its performance. When Video System is PAL-M or PAL-N, select system manually. PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N If the projector cannot reproduce proper video image, it is necessary to select a specific broadcast signal format among PAL, SECAM, NTSC - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 40
for viewing picture in a bright room. Standard Normal picture level preset on this projector. Cinema Picture level adjusted for the picture with fine tone. Blackboard (Green) (Green) Colorboard Image 1 Image 2 Image 3 Image 1 ~ 4 User preset image in the Image Adjust Menu (pp.42-43). Image 4 40 - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 41
in a bright room. Standard Normal picture level preset on this projector. Cinema Picture level adjusted for the picture with fine tone. preset four colors. Press the SELECT button to choose the color. Image 1 ~ 4 User preset image in the Image Adjust Menu. (pp.42-43) Video Input Image Select - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 42
Video Input Image Level Adjustment 1 Press the MENU button to display the On-Screen Menu. Press the Point ◄► buttons to move the red frame pointer to the Image Adjust Menu icon. Image Adjust Menu 2 Press the Point ▲▼ buttons to move the red frame pointer to the item that you want to adjust, and - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 43
Select "L1" for an active picture. L2 . . . . Select "L2" for a still picture. Film . . . Select "Film" for watching a film. With this function, the projector reproduces pictures faithful to the original film quality. Reset To reset the adjusted data, select Reset and press the SELECT button. The - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 44
Video Input Screen Size Adjustment This projector has the picture screen resize function, which Wide Provide the image at a wide screen ratio of 16:9. Custom Adjust the screen scale and position manually with this function. Press the SELECT button at Custom and the "Custom" is displayed on the - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 45
Setting Setting This projector has Setting menu that allows you to set up the other various functions described as follows: 1 Press the MENU button to display the On-Screen - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 46
While Input Search is set On1 or On2, the status of Input and Lamp mode are displayed every time the signal is switched. • If any of . . . . Always works and corrects keystone distortion according to the projector's tilt. Manual . . Works only when pressing the AUTO SETUP button on the top control - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 47
Displays, except. Countdown off . . . . Show the input image instead of the countdown when turning on the projector. Use this function when you want to project the image as early as possible even when the lamp is not bright enough. On Show all the On-Screen Displays. Use this function when you want - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 48
Logo select function and set it to "User". Then the captured image is displayed when turning on the projector next time or pressing the NO SHOW .31-32, 40-41) • A signal from a computer can be captured up to XGA (1024x768). A signal from video equipment can be captured except for 720p, 1035i, and - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 49
PIN code setting. For details on PIN code setting, refer to relevant instructions of the PIN code lock function on pages 53 and 54. CAUTION: WHEN KEEP IT SECURELy . SHOULD THE LOGO PIN CODE BE LOST OR FORGOTTEN, THE PROjECTOR CAN NO LONGER BE OPERATED . Logo PIN code lock Logo PIN code lock Dialog - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 50
right reversed. This function is used to project the image from a ceiling mounting the projector. Rear When this function is "On", the picture is left/right reversed as well as maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not used for a - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 51
brightness Auto brightness according with the input signal Eco lower brightness reduces the lamp power consumption and extends the lamp life. Note: Lamp mode cannot be changed for a while after turning on the projector. Lamp needs some time to stabilize after the power is turned on. Stored - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 52
use is automatically set to 0. Move the red frame pointer to "filter control" and press the SELECT button. Remote control This projector provides two different remote control codes: the factory-set initial code (Code 1) and the secondary code (Code 2). This switching function prevents remote - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 53
and you do not have the remote control or there is something wrong with your remote control, contact the dealer where you purchased the projector or the service center. Key lock Select Key lock. Choose one of the alternatives with the Point ▲ ▼ buttons and select [Yes] to activate it. PIN code - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 54
new pin code in column of the pin code no. memo on page 79, and keep it securely. If you forget your PIN code, the projector can no longer be started. Enter a PIN code The input numbers change to "" for security. Move the pointer to "Set" by pressing the Point ► button - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 55
for operation. Note: Do not reset the Lamp replacement counter without implementation of lamp replacement. Be sure to reset the Lamp replacement counter only after replacing the lamp. Lamp replacement icon This icon appears on the screen when the end of lamp life is reached. Note: This icon also - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 56
of the filter use, timer setting option and the Reset options. When the projector reaches a time set in the timer setting, the Filter replacement icon the user logo, PIN code lock, Logo PIN code lock, and the lamp counter to the factory default settings. Quit Exit the Setting Menu. Filter counter - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 57
Instructions Filter prevents dust from accumulating on the optical elements inside the projector. Should the filter becomes clogged with dust particles, it will reduce cooling fans' effectiveness and may result in internal heat buildup and adversely affect the life of the projector. This projector - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 58
dealer or service station for proper cleaning. ORDER REPLACEMENT FILTER CARTRIDGE Replacement filter cartridge can be ordered through your dealer. When ordering, give the following information to the dealer. ● Model No. of your projector PLC-XC50/PLC-XC55 ● Replacement Filter Cartridge Type - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 59
the Point ◄► buttons to move the red frame pointer to the Setting Menu icon. 2 Use the Point ▲▼buttons to move the red frame pointer to Filter counter and then press the SELECT button. A dialog box appears showing the Used time option and the Scrolls remaining option. Use the Point ▲▼ buttons to - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 60
to cool, for at least 45 minutes before you open the Lamp cover. The inside of the projector can become very hot. CAUTION For continued safety, replace with a lamp of the same type. Do not drop a lamp or touch a glass bulb! The glass can shatter and may cause injury. CAUTION When replacing the - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 61
Screw Screw Lamp ORDER REPLACEMENT LAMP Replacement lamp can be ordered through your dealer. When ordering a projection lamp, give the following information to the dealer. ● Model No. of your projector : PLC-XC50 / PLC-XC55 ● Replacement Lamp Type No. : POA-LMP127 (Service Parts No - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 62
up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down. (Follow carefully the instructions in the Lamp Replacement section of this manual.) Continuous use of the lamp with the LAMP REPLACE indicator lighted may increase the risk of lamp explosion. ● A Lamp may explode as - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 63
projector away from the ventilation duct of airconditioning equipment. - Is the air filter clean? Replace the filter periodically. (p.52) The projector the AC power cord and contact the service station for check and repair. CAUTION DO NOT LEAVE THE PROJECTOR WITH THE AC POWER CORD CONNECTED UNDER - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 64
cover with a cleaning cloth that contains a small amount of non-abrasive camera lens cleaner, or use lens cleaning paper or a commercially available air Projector Cabinet Follow these steps to clean the projector cabinet. 1 Disconnect the AC power cord before cleaning. 2 Softly wipe the projector - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 65
lamp. (See page 60) - Unlock the Key lock function. (See page 53) - See if the filter cartridge is inserted. - Make sure "Off" or "Countdown off" are not chosen at Display function.(see page 47) - Make sure "User connecting to a projector. See your computer's instruction manual for the setting. - - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 66
does not work properly Auto keystone does not work properly even when the projector is tipped The image is distorted or runs off PIN code dialog box (see page 50) - Make sure the Auto keystone function is not set to "Manual". Press the AUTO SETUP button on the top control or the AUTO SET button on - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 67
attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Give the model number and explain about the problem. We will advise you how to obtain service. The CE Mark is a Directive - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 68
Appendix Menu Tree Computer Input/Video Input Input Computer 1 (Analog) Computer 1 (Digital) Computer 2 Sound Sound Video Volume Mute Quit 0 - 63 On/Off Computer Input System (1) Mode 1 Mode 2 SVGA 1 - - - - PC Adjust Auto PC Adj. Fine sync Total dots Horizontal Vertical Current mode - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 69
Appendix Image Select Image Adjust Screen Dynamic Standard Real Blackboard (Green) Colorboard Image 1 4 Colors Image 2 Image 3 Image 4 Contrast Brightness Color temp. Red Green Blue Sharpness Gamma Reset Store Quit 0 - 63 0 - 63 High Mid Low XLow Adj. 0 - 63 0 - 63 0 - 63 0 - 15 0 - 15 - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 70
Off Auto Manual Quit Keystone Blue back Display Logo Ceiling Rear Standby mode Power management On start Closed Caption Lamp control Filter control Remote Off Projector Remote Control Quit PIN code lock PIN code lock entry Off On1 On2 PIN code change Quit Quit Fan Warning log Lamp counter Filter - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 71
..." message (Fig. 1) appear on the screen for about 30 seconds. The projector is detecting abnormal condition. Indicators POWER red/green WARNING TEMP. red WARNING FILTER orange LAMP REPLACE yellow Projector Condition green blinking fast red blinking fast red The temperature inside - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 72
plug it again to turn on the projector. If the projector is turned off again, unplug the AC power cord and contact the dealer or the service center. Do not leave the projector on. It may cause an electric shock or a fire hazard. When the filter detects clogging, reaches a time set in the - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 73
Basically this projector can accept the XGA 1 800 x 600 832 x 624 1024 x 768 XGA 2 XGA 3 XGA 4 1024 x 768 1024 x 768 1024 x 768 XGA 5 XGA 6 XGA 7 1024 x 768 1024 x 768 1024 x 768 XGA 8 XGA 9 XGA 10 1024 x 768 1024 x 768 1024 x 768 XGA 11 XGA 12 1024 x 768 1024 x 768 XGA 13 XGA 14 XGA - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 74
Appendix When the input signal is digital from DVI terminal, refer to the chart below. ON-SCREEN DISPLAY D-VGA D-480p D-575p D-SVGA D-XGA D-WXGA 1 D-WXGA 2 D-WXGA 3 D-WXGA 4 D-WXGA 5 D-WXGA 6 D-WXGA 7 RESOLUTION 640 x 480 640 x 480 768 x 575 800 x 600 1024 x 768 1366 x 768 1360 x 768 1376 x 768 - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 75
Multi-media Projector 410.0 mm x 85.0 mm x 262.8 mm (Not including protrusions) 8.82lbs (4.0 kg) 0˚ to 10.0˚ Panel Resolution LCD Panel System Panel Lens Throw Distance Projection Lamp Adjustable from 40" to 300" F 1.60-1.76 lens with f =22.33 mm ~ 26.80 mm with manual zoom and focus 4.6' - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 76
Manual (CD-ROM) Quick Reference Guide AC Power Cord Remote Control and Batteries VGA Cable PIN Code Label ● The specifications are subject to change without notice. ● LCD LCD panels. Optional Parts The parts listed below are optionally available. When ordering those parts, specify the item and Model - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 77
Appendix Configurations of Terminals COMPUTER INPUT/COMPONENT INPUT/MONITOR OUTPUT TERMINAL (ANALOG) DVI-I (DIGITAL/ANALOG) C1 C2 12345678 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 C3 C4 C5 C1 Analog Red Input C2 Analog Green Input C3 Analog Blue Input C4 Analog Horiz. sync C5 Analog Ground - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 78
Appendix Dimensions Unit: inch (mm) Screw Holes for Ceiling Mount Screw: M4 Depth: 0.47(12.0) 2.17(55.0) 2.81(71.5) 16.14 (410.0) 5.91(150.2) 1.97 (50.7) 3.52(89.4) 2.17(55.2) 8.60(218.5) 10.35(262.8) - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 79
Number Memo Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. PIN Code Lock No. Logo PIN Code Lock No. Factory default set No: 1 2 3 4* Factory default set - Sanyo XC55 | Instruction Manual, PLC-XC55 - Page 80
KK7AC SANYO Electric Co., Ltd.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
 |
 |
Multimedia Projector
MODEL
PLC-XC50
PLC-XC55
Owner's Manual