Sanyo XF41 Instruction Manual, PLC-XF41

Sanyo XF41 - PLC XGA LCD Projector Manual

Get Sanyo XF41 - PLC XGA LCD Projector PDF manuals and user guides View all Sanyo XF41 manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo XF41 manual content summary:

  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 1
    Multimedia Projector MODEL PLC-XF41 ✽ Projection lens is optional. Owner's Manual
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 2
    EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE OWNER'S MANUAL WITH
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 3
    , be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or injury to persons. Upon completion of any service or repairs to this projector, ask the
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 4
    instruction manual Cord supplied with this projector meets the requirement for replacement fuse cover is required, ensure it is of the same colour as that visible on the pin face of the plug (i.e. red or orange). Fuse covers are available from the Parts Department indicated in your User Instructions
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 5
    43 AIR FILTER CARE AND CLEANING 44 CLEANING PROJECTION LENS 44 TURNING ON / OFF PROJECTOR 22 LAMP MANAGEMENT 45 ADJUSTING SCREEN 23 LAMP REPLACEMENT 46 ZOOM ADJUSTMENT 23 TROUBLESHOOTING 48 FOCUS ADJUSTMENT LENS SHIFT ADJUSTMENT 23 TECHNICAL SPECIFICATIONS 50 23 KEYSTONE
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 6
    projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. N Compatibility N Motor-driven Lens Shift This projector between XGA (1024 x 768) and UXGA (1600 x 1200) is compressed into 1024 x 768 dots. This projector cannot
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 7
    PROJECTION LENS LENS COVER MAIN ON / OFF SWITCH CAUTION Do not turn on a projector with lens cover attached. High temperature from light beam may damage lens cover Cooling Fans. INFRARED REMOTE RECEIVER LAMP COVER BOTTOM OF CABINET AIR INTAKE VENTS This projector is equipped with cooling fans
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 8
    plug into any other type of power system. Consult your authorized dealer or service station if you are not sure of type of power supply being in use. Connect a projector with peripheral equipment before turning a projector on. (Refer to pages 12 ~ 15 for connection.) Connect AC Power Cord (supplied
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 9
    For specifications of Projection Lens, refer to manual separately attached or contact sales dealer where you purchased a projector. 2. For installation, refer to installation manual supplied to a Projector. When moving or setting up a projector, be sure to replace a Lens Cover to protect a surface
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 10
    to hold Carrying Handles on both sides by 2 or more people when moving a projector. Moving it unproperly may result in damage of cabinet or person's injury. Replace lens cover and retract feet to prevent damage to lens and cabinet. CARRYING HANDLE 1 Pull up lock buttons on each side of carrying
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 11
    . For Terminal Boards, contact sales dealer where you purchased a projector. INPUT/OUTPUT TERMINALS 4 TERMINAL SLOTS (Factory set) SERIAL PORT on terminal. 2 Pull out terminal by holding handle. 3 Replace terminal. Insert terminal along Guide to fit Plug into Socket. 4 Tighten screws to secure
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 12
    AUDIO CONTROL PORT R L (MONO) INPUT 4 INPUT 3 INPUT 2 INPUT 1 INPUT 1, 2, 4 CONTROL PORT CONNECTORS When controlling computer with Remote Control of this projector, connect mouse port of your personal computer to these connectors. (Refer to P14.) INPUT 3 AV INPUT (VIDEO/Y, C) JACKS Connect
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 13
    Wired Remote Control, Connect Wired Remote Control Unit to this jack with Remote Control Cable (supplied). (Refer to page 19.) RESET BUTTON This projector uses a micro processor to control unit. Occasionally, micro processor may malfunction and need to be reset. This can be done by pressing RESET
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 14
    and external equipment should be disconnected from AC outlet. Turn a projector and peripheral equipment on before computer is switched on. IBM-compatible computers or Macintosh computers (VGA / SVGA / XGA / SXGA/UXGA) Desktop type Laptop type 14 Monitor Output BNC Cable ✽ Monitor Output
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 15
    Cable ✽ • Audio Cable (RCA x 2) ✽ (✽ = Cables are not supplied with this projector.) NOTE : When connecting cable, power cords of both a projector and external equipment should be disconnected from AC outlet. Turn a projector and peripheral equipment on before computer is switched on. Video Source
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 16
    BUTTONS Used to adjust volume. (P25) POWER ON-OFF BUTTON Used to turn a projector on or off. (P22) MENU BUTTONS Used to open or close MENU operation. AUTO PC Adjustment function. (P29) AUTO PC ADJUST IMAGE LENS SHIFT BUTTONS Used to select LENS SHIFT function. (P23) INPUT 1/2 BUTTON Used to
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 17
    when any of them becomes out. Check which lamp needs to be replaced on Lamp Status Display. (P45-47) WARNING TEMP. INDICATOR This indicator flashes red when internal projector temperature is too high. (P43) READY INDICATOR This indicator lights green when a projector is ready to be turned on. And
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 18
    button and press it again. ON-OFF ZOOM FOCUS VOLUME MUTE D.ZOOM INPUT 1/2 MENU INPUT 3/4 LASER LENS SHIFT KEYSTONE NO SHOW FREEZE AUTO PC ADJ. IMAGE P-TIMER POWER ON-OFF BUTTON Used to turn projector on or off. (P22) INPUT 1/2 BUTTON Used to select input source either INPUT 1 or INPUT
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 19
    16.4' (5m) and 60° in front and rear of a projector. 60° LENS SHIFT BUTTON Used to select LENS SHIFT function. (P23) 16.4' (5 m) FREEZE BUTTON Used to freeze if battery is incorrectly replaced. G Dispose of used batteries according to the batteries manufacturers instructions and local rules. 19
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 20
    TO OPERATE ON-SCREEN MENU You can control and adjust this projector through ON-SCREEN MENU. Refer to following pages to operate function by pressing SELECT button. SELECT BUTTON Used to select item. SIDE CONTROL MENU LENS SHIFT I SELECT I POINT BUTTONS Used to move Pointer UP/ DOWN/ RIGHT/
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 21
    Press MENU BUTTON while connecting to PC input source. GUIDE WINDOW Shows selected item of ONSCREEN MENU. PC SYSTEM / Digital zoom +/-] (Refer to P34) SETTING MENU Used to change settings of projector or reset Lamp Replace Counter. (Refer to P40-42) INPUT MENU Used to select input source (Input
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 22
    LAMP indicator lights RED, and READY indicator lights GREEN. LAMP STATUS INPUT 1 13 24 30 3 Press POWER ON-OFF button on Side Control or on Remote Control Unit to ON. LAMP projector. LAMP indicator lights projector detects signal interruption and turns off Projection Lamp projector projector on again
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 23
    Adjust focus of image by pressing FOCUS L/M button(s) . Focus Message disappears after 4 seconds. LENS SHIFT ADJUSTMENT 1 Press the LENS SHIFT button on Side Control or on the Remote Control Unit. Message "Lens shift" is displayed. 2 Press POINT UP button to move image up, press POINT DOWN button
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 24
    BASIC OPERATION PICTURE FREEZE FUNCTION Press FREEZE button on Remote Control Unit to freeze picture on-screen. To cancel FREEZE function, press FREEZE button again or press any other button except POINT / SELECT / RIGHT CLICK / LASER button. NO SHOW FUNCTION Press NO SHOW button on Remote
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 25
    BASIC OPERATION SOUND ADJUSTMENT DIRECT OPERATION Volume Press VOLUME (+/-) button(s) on Side Control or on Remote Control Unit to adjust volume. Volume dialog box appears on screen for a few seconds. (+) button to increase volume, and (-) button for decreasing. Mute Press MUTE button on Remote
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 26
    COMPUTER INPUT SELECTING INPUT SOURCE DIRECT OPERATION Select INPUT source by pressing INPUT 1/2 and INPUT 3/4 buttons on Side Control or on Remote Control Unit. INPUT 1/2 button INPUT 1 INPUT 2 INPUT 3/4 button INPUT 3 INPUT 4 MENU OPERATION 1 Press MENU button and ON-SCREEN MENU will appear.
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 27
    Menu icon. (Refer to P29.) When image is not provided properly, manual adjustment is required. (Refer to P29 and 30.) There is no signal input from computer. Make sure connection of computer and a projector is set correctly. (Refer to TROUBLESHOOTING on page 48.) PC SYSTEM MENU PC SYSTEM Menu icon
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 28
    INPUT COMPATIBLE COMPUTER SPECIFICATIONS Basically this projector can accept a signal from all SVGA 4 SVGA 5 SVGA 6 SVGA 7 SVGA 8 SVGA 9 SVGA 10 SVGA 11 MAC 16 XGA 1 XGA 2 XGA 3 XGA 4 XGA 5 XGA 6 XGA 7 XGA 8 XGA 9 XGA 10 XGA 11 XGA 12 RESOLUTION 640 x 480 720 x 400 640 x 400 640 x 480 640 x 480
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 29
    Adjustment parameters from Auto PC Adjustment can be memorized in this projector. Once parameters are memorized, setting can be done just by selecting Mode Adjustment function. When image is not provided properly through this function, manual adjustments are required. (Refer to page 30, 31.) G Auto
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 30
    cannot reproduce a proper image and image may be recognized as a flickering picture, a non-synchronized picture, a non-centered picture or a skewed picture. This projector has a Manual PC Adjustment to enable you to precisely adjust several parameters to match with those special signal formats. This
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 31
    SELECT button at Display area icon and Display area dialog box appears. Display area Display area V Adjustment of vertical area displayed with this projector. Press POINT LEFT/RIGHT button(s) to decrease/increase value and then press SELECT button. Full screen Press POINT LEFT/RIGHT button(s) to
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 32
    IMAGE button on Side Control or on Remote Control Unit. Standard Normal picture level preset on this projector. Real Picture level with improved halftone for graphics. IMAGE 1~4 User preset picture adjustment in IMAGE ADJUST Menu (P33). IMAGE button Standard Real Image 1 Image 2 Image 3 Image
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 33
    is changed to "Off" and progressive scan mode to off. Press POINT LEFT/RIGHT button(s) again, progressive scan mode to on. 3 Store To store manually preset image, move a red frame pointer to Store icon and press SELECT button. Image Level Menu will appear. Move a red frame pointer to Image
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 34
    higher than 1600 X 1200. If your computer's screen resolution is higher than 1600 X 1200, reset resolution to lower before connecting projector. G Image data in other than XGA (1024 x 768) is modified to fit screen size in initial mode. G Panning function may not operate properly if computer system
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 35
    VIDEO INPUT SELECTING INPUT SOURCE WHEN SELECT INPUT 2 (5 BNC SLOT ) When connect component video output (Cr, Y, Cb or Pr, Y, Pb) from INPUT MENU video equipment to R/Pr, G/Y and B/Pb jacks. 1 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move a red frame
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 36
    signal, and adjusts itself to optimize its performance. When Video System is 1035i, 1080i50 or 1080i60, select system manually first. COMPONENT VIDEO SIGNAL FORMAT If projector cannot reproduce proper video image, it is necessary to select a specific component video signal format among 480i, 575i
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 37
    IMAGE button on Side Control or on Remote Control Unit. Standard Normal picture level preset on this projector. Cinema Picture level adjusted for picture with fine tone. IMAGE 1~4 User preset picture adjustment in IMAGE ADJUST Menu (P39). IMAGE button Standard Cinema Image 1 Image 2 Image 3 Image
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 38
    VIDEO INPUT IMAGE LEVEL ADJUSTMENT 1 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button(s) to move a red frame pointer to IMAGE ADJUST Menu icon. 2 Press POINT DOWN button to move a red frame pointer to item that you want to adjust and then press SELECT button. Level
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 39
    . Image Level Menu Move a red frame pointer to image icon to be set and then press SELECT button. Store icon PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display desirable image size. 1 Press MENU button and ON-SCREEN MENU will appear. Press
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 40
    Refer to KEYSTONE ADJUSTMENT on page 23. When pressing SELECT button at Language, Language Menu appears. Blue back When this function is "On," this projector will produce a blue image instead of video noise on screen when any input source is unplugged or turned off. Display This function decides
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 41
    counting down for 5 minutes, projector lamp and READY indicator are turned off. 3. When READY indicator flashing, Projection Lamp can be turned on again (Code 1), operate both projector and Remote Control in ways above again. NOTE : When batteries of Remote Control Unit are replaced or ALL-OFF switch
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 42
    Move a pointer to item and then press POINT LEFT/RIGHT button(s). Lamp counter reset Be sure to reset Lamp Counter when Lamp Assembly is replaced. When Lamp Replace Counter is reset, LAMP REPLACE indicator stops lighting. 1 Turn projector on, press MENU button and ON-SCREEN MENU will appear. Press
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 43
    has no mouse port, connect Serial Port of your computer to Control Port of a projector with Control Cable for Serial Port (not supplied). OPERATING WIRELESS MOUSE When controlling a PC Cooling Fans or Internal Circuits may be malfunctioning. Contact service personnel from an authorized dealer or
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 44
    air filter and replace air filter to a projector. CAUTION Do not operate a projector with Air Filter removed. Dust may accumulate on LCD Panel and Mirror service station for proper cleaning. CLEANING PROJECTION LENS Follow these steps to clean projection lens: 1 Apply a non-abrasive camera lens
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 45
    becomes darker or color becomes unnatural, replace lamp. (LAMP REPLACE indicator lights yellow.) LAMP STATUS DISPLAY X Mark on Lamp (LAMP REPLACE indicator flashes yellow.) Projection lamp is defective or fails to be turned on. Restart a projector on, and make sure lamp is on. If this mark still
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 46
    type. Do not drop a lamp assembly or touch a glass bulb! The glass can shatter and may cause injury. Follow these steps to replace lamp assembly. 1 Check number of lamp to be replaced on Lamp Status Display. 2 Turn off a projector and disconnect AC Power Cord. Allow a projector to cool down for at
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 47
    APPENDIX ORDER REPLACEMENT LAMP Replacement Lamp can be ordered through your dealer. When ordering a Projection Lamp, give the following information to the dealer. G Model No. of your projector : G Replacement Lamp Type No. : PLC-XF41 POA-LMP42 (Service Parts No. 610 292 4831) LAMP HANDLING
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 48
    APPENDIX TROUBLESHOOTING Before calling your dealer or service center for assistance, check matters below once again. 1. Make sure you have connected a projector to your computer or video equipment as described in section "CONNECTING PROJECTOR" on pages 12 ~ 15. 2. Check cable connection. Verify
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 49
    problems yourself. If a projector fails to work properly, see "TROUBLESHOOTING" section on page 48, 49. To correct failure, try "Solutions". If after following all operating instructions, you find that service is necessary, contact Sanyo Service Station or store where you purchased unit. Give model
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 50
    Projector Type Dimensions (W x H x D) Net Weight LCD Panel System Panel Resolution Number of Pixels Color System High Definition TV Signal Motorized Lens Shift Scanning Frequency Horizontal Resolution Projection Lamp Wave length : 650±20nm) Owner's Manual AC Power Cord Wireless/Wired Remote Control
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 51
    APPENDIX CONFIGURATIONS OF TERMINALS DVI-I TERMINAL (DIGITAL/ANALOG) This terminal accepts only Digital (TMDS) or Analog (RGB) output signal. Connect display output terminal of computer to this terminal with DVI cable (supplied). Pin Configuration C1 C2 12345678 9 10 11 12 13 14 15 16 17 18 19
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 52
    APPENDIX SERIAL PORT IN/OUT TERMINAL Pin Configuration Connect serial port output terminal of computer to this terminal with Serial Cable (not supplied). 54321 9 87 6 1 ----2 RxD 3 TxD 4 ----5 Ground 6 ----7 ----8 ----9 ----- USB PORT TERMINAL Pin Configuration Connect USB port output terminal
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 53
    APPENDIX 53
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 54
    APPENDIX 54
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 55
    APPENDIX 55
  • Sanyo XF41 | Instruction Manual, PLC-XF41 - Page 56
    Printed in Japan Part No. 610 305 1314 (1AA6P1P3843-- MC7A) SANYO Electric Co., Ltd
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
Owner's Manual
PLC-XF41
Multimedia Projector
MODEL
✽
Projection lens is optional.