Sanyo XF60 Instruction Manual, PLC-XF60 Real Colour Manager
Sanyo XF60 - PLC XGA LCD Projector Manual
View all Sanyo XF60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sanyo XF60 manual content summary:
- Sanyo XF60 | Instruction Manual, PLC-XF60 Real Colour Manager - Page 1
Ver. 1.0 Owner's Manual CAUTION (Read before operation) This software is to adjust the projector's setting from factory default the installation screen. We assume no responsibility for any computer or system troubles, data lost, data corruption or malfunction of equipments caused by the - Sanyo XF60 | Instruction Manual, PLC-XF60 Real Colour Manager - Page 2
the connection configuration 9 The connection setting to a projector (Serial connection 9 The connection configuration to projectors. (Serial / Daisy chain, LAN connection 9 name of corporation or product in Owner's manual is a trademark or a registered trademark of its respective corporation. 2 - Sanyo XF60 | Instruction Manual, PLC-XF60 Real Colour Manager - Page 3
, follow STEP1, 2 and 3. Refer to the each section to prepare and operate the software. STEP-1 Preparation Refer to 2. Preparation Connecting a computer to projectors Installation of Real Color Manager Pro STEP-2 Start-up and operation configuration Refer to 3. Start-up of Real Color Manager and - Sanyo XF60 | Instruction Manual, PLC-XF60 Real Colour Manager - Page 4
is used for the operation. Serial connection (When connecting several projectors via Daisy connection) Connect projectors via daisy chain connection with Serial cables. For operation, select the address of each projector (ID No.s set to each projector) you want to operate. (See p10) Serial Port IN - Sanyo XF60 | Instruction Manual, PLC-XF60 Real Colour Manager - Page 5
operate Color Correction and Gamma Correction at the same time.) *For LAN connection, Network Board POA-MD19NET (Optionally available) needs to be equipped with the projector. English LAN Terminal LAN Terminal LAN Terminal LAN Network Real Color Manager installed PC 5 - Sanyo XF60 | Instruction Manual, PLC-XF60 Real Colour Manager - Page 6
Preparation ■ Installation of Real Color Manager Pro Install Real Color Manager Pro on a computer. 1. Insert the Program CD-ROM into the CD-ROM drive of the computer. 2. Open My computer and click CD-ROM Drive. Then open Tool folder and double click the set-up icon 3. Select English for the - Sanyo XF60 | Instruction Manual, PLC-XF60 Real Colour Manager - Page 7
-up program of the computer. Real Color Manager starts up and the start-up screen will appear. Real Color Manager start-up screen Check the Projector list display box and the screen on the next page will appear. 7 - Sanyo XF60 | Instruction Manual, PLC-XF60 Real Colour Manager - Page 8
Setting Screen and the function Menu name qList display wAdd eModify rDelete tColor correction yProjector List Display Function Display the list of registered projectors. Double click outside of the list to open the window to add the address setting. Double click any place on the list to - Sanyo XF60 | Instruction Manual, PLC-XF60 Real Colour Manager - Page 9
English Startup of Real Color Manager and operation configuration ■ Setting the connection configuration The connection setting to a projector (Serial connection) When connecting via LAN connection, skip this operation. 1. Click "Setting" on the start-up screen to get to the next window. 2. Select - Sanyo XF60 | Instruction Manual, PLC-XF60 Real Colour Manager - Page 10
001 to 999. For details about ID No. setting, refer to the owner's manual of the projector. 5. Memo function u is useful for take a note about the projector. 6. Press "OK" !0. 7. The list of the registered projectors is shown on the connection setting screen. Setting of LAN connection 1. Press "Add - Sanyo XF60 | Instruction Manual, PLC-XF60 Real Colour Manager - Page 11
"LAN" r. (Figure below) 3. Input the ID No. (011-999) which comes first in e. (When connecting via LAN con- nection, input the IP address of the projector which comes first in t. When you have already set the password, input the password in y. 4. Input the number of the - Sanyo XF60 | Instruction Manual, PLC-XF60 Real Colour Manager - Page 12
operation configuration Modify the connection setting Modify the connection setting which has already set. Select the list you want to modify from the projector lists q on the Connection setting screen. The background color of the selected list is reversed. Press "Modify" button e in the figure on - Sanyo XF60 | Instruction Manual, PLC-XF60 Real Colour Manager - Page 13
loaded data. You will need the data when you want to use the initial data. Correction data is provided for each lamp mode. Change the lamp mode and restart the projector, then store the data for each lamp mode. Refer to the "save and load" (p19) for details about saving the data. When the - Sanyo XF60 | Instruction Manual, PLC-XF60 Real Colour Manager - Page 14
about toolbar. y Data range Display the data range figure of Color Correction. uLamp Display the current lamp status of the projector. iNo show When selecting no show on the projector (P), projector shutter is closed and message "No show" is displayed. When selecting Rear projection mode, the - Sanyo XF60 | Instruction Manual, PLC-XF60 Real Colour Manager - Page 15
Color Correction English Menu item !0Ceiling Function When selecting Ceiling projection mode, the message "Ceiling" is shown. !1STEP Set the unit of figures when changing the figure with UP/DOWN buttons or mouth scroll. You can select the unit from the list or you can input figures directly. ! - Sanyo XF60 | Instruction Manual, PLC-XF60 Real Colour Manager - Page 16
. / " Return to factory default setting" Return the adjusted data of the projector to factory default setting. / "Lamp" Select the lamp mode among "ALL lamps", "Lamp 1" and "Lamp 2". / "No show" Select ON/OFF of the shutter. / "Rear projection" Select ON/OFF / "Ceiling" Set to project from ceiling - Sanyo XF60 | Instruction Manual, PLC-XF60 Real Colour Manager - Page 17
. 7. Confirm the correction on the screen. 8. Repeat step 4 to 7. 9. Repeat step 2 to 8 and adjust each layer. 10. Repeat step 1 to 9 for each lamp mode. When projecting the image from the back of the screen, select "Rear projection" in the "Projector (P)". When projecting from ceiling mounting - Sanyo XF60 | Instruction Manual, PLC-XF60 Real Colour Manager - Page 18
. 6. Repeat step 2 to 5 and adjust until you get the white screen. After completing the adjustment, save the data. The stored data is for the current lamp mode. 7. Change the lamp mode from "Lamp" in the "Projector (P)" menu. Adjust Color purity according to the step 1 to 6 for each - Sanyo XF60 | Instruction Manual, PLC-XF60 Real Colour Manager - Page 19
"Return to factory default" in the "Projector (P)" menu.Then Color Correction for all the lamp modes go back to the factory default settings. CAUTION: FACTORY DEFAULT COLOR CORRECTION DATA IS STORED IN THE PROJECTOR. WHEN YOU CHANGE THE PANEL WITH SERVICE, ADJUSTMENT IN REPLACED PANEL CANNOT BE SET - Sanyo XF60 | Instruction Manual, PLC-XF60 Real Colour Manager - Page 20
Gamma Correction Gamma Correction menu is to adjust the Gamma data of the projector. Gamma correction needs to be made for each of video mode and the same mode. ■ Start-up of Gamma Correction 1.Check the Projector list display box on the Real Color Manager start-up screen (u button in the figure - Sanyo XF60 | Instruction Manual, PLC-XF60 Real Colour Manager - Page 21
via Serial connection, the screen displays "Color Correction Pro". When connecting several projectors via Daisy chain connection or LAN connection, the screen displays registered "projector No. - memo - address" and "Gamma Correction Pro". wMenu eToolbar Refer to Menu, Toolbar and the functions - Sanyo XF60 | Instruction Manual, PLC-XF60 Real Colour Manager - Page 22
data" The same as !1. / "Send data (W)" The same as !2. / "Power ON" Turning on power of the projector. tHelp (Alt + H) "About Gamma Correction Pro" Display the version of the projector. yOpen Open the file. uSave Save the file. iStore data 1-5 Store the created data temporary. oSend data - Sanyo XF60 | Instruction Manual, PLC-XF60 Real Colour Manager - Page 23
buttons which has the same number you selected displays in color. Press one of the "Send data 0-6" buttons to load the stored data to the projector. The adjusted data will be displayed on the projected screen. Press "Initialize (I)" in the "Edit(E)" menu, the adjusted data goes back to the straight - Sanyo XF60 | Instruction Manual, PLC-XF60 Real Colour Manager - Page 24
data. Each of video data and computer data can be set in the projector. When storing the data, give a distinctive name. Save and load according screen. Press "Send data" button then the adjusted data is sent to the projector and the data will be projected on the screen. ■ Exit Select "Exit" in the - Sanyo XF60 | Instruction Manual, PLC-XF60 Real Colour Manager - Page 25
25 - Sanyo XF60 | Instruction Manual, PLC-XF60 Real Colour Manager - Page 26
Real Color Manager Pro
Ver. 1.0
Color Correction
Gamma Correction
Owner's Manual
CAUTION (Read before operation)
This software is to adjust the projector's setting from factory default to
what you like. These adjustments are for customers who need and under-
stand about these adjustments. Therefore if you do not need these adjust-
ments or do not fully understand about these adjustments, please do not
try to operate. Projectors have equipped with the best adjustments at the
factory. You do not need to change these settings
for ordinary use.
If you try these adjustments without necessity or adjust wrongly,
projector could lose performances or functions. Whenever you try to
adjust, we recommend you to save factory default setting data in advance.
You will need the data when you want to go back to factory default set-
ting.
Caution for using this software
When installing this software on a computer, make sure to read carefully
[License Agreement] on the installation screen. We assume no responsibility for
any computer or system troubles, data lost, data corruption or malfunction of
equipments caused by the softwear or mishandling. We highly recommend to
store the important data in the recording medium to another disc.
✼
You may not copy the printed materials accompanying with the software.
✼
The contents of this manual might be changed without notice.
✼
The picture shape and screen display could be different from actual ones.
English
日本語