Sanyo XF60 Instruction Manual, PLC-XF60A

Sanyo XF60 - PLC XGA LCD Projector Manual

Get Sanyo XF60 - PLC XGA LCD Projector PDF manuals and user guides View all Sanyo XF60 manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo XF60 manual content summary:

  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 1
    Multimedia Projector MODEL PLC-XF60A PLC-EF60A ✽ Projection lens is optional. Owner's Manual
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 2
    Security Functions The following security or anti-theft functions prevent others except users from using the projector: Key Lock, PJ Lock, and USB Lock. (☞ p.27, 54, and 55) ◆ One-Touch Removable Filter and Filter LED One-touch removable filter allows you an easy maintenance and the orange lighting
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 3
    Indicators and Projector Condition 65 Main Indicators 65 Shutter Indicator 66 Warning Filter Indicator 66 Lamp Replace Indicators 67 Appendix 68 Troubleshooting 68 Compatible Computer Specifications 70 Technical Specifications 72 Optional Parts 73 Menu Tree 74 Dimensions 77
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 4
    problem still persists, contact the dealer where you purchased the projector or the service center. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 5
    with the projector. Wall or shelf mounting should follow the manufacturer's instructions, and should use a mounting kit projector exhibits a distinct change in performance-this indicates a need for service. When replacement parts are required, be sure the service technician has used replacement
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 6
    Safety Instructions Air Circulation Openings in the cabinet are provided for Setup In Proper Directions Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe accident or fire hazard. This projector is allowed to project the picture
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 7
    about transporting the projector by courier or any other transport service, consult your dealer. REMOVE LENS FROM THE PROJECTOR WHEN CARRYING. OTHERWISE, IT MAY CAUSE SERIOUS DAMAGE TO LENS AND THE PROJECTOR. WHEN TRANSPORT OR STORE THE PROJECTOR WITHOUT LENS, REPLACE THE LENS COVER PLATE INITIALLY
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 8
    instruction manual Cord supplied with this projector meets the requirement for replacement fuse cover is required, ensure it is of the same colour as that visible on the pin face of the plug (i.e. red or orange). Fuse covers are available from the Parts Department indicated in your User Instructions
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 9
    Remote Receiver w Projection Lens (Option) e Front Cover (inside Terminals) r Carrying Handle t Air Exhaust Vent CAUTION Hot air is exhausted from the exhaust vent. Do not put heat-sensitive objects near this side. CAUTION This projector vent slots. ● Keep projector sides clear of any objects.
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 10
    rty u q LAMP 1 REPLACE indicator Turns orange when the life of the projection Lamp 1 draws to an end. (p.62, 67) w WARNING TEMP indicator Blinks red when the internal temperature of the projector is abnormally high. (p.60, 65) e WARNING FILTER indicator Lights orange when the projector's filter is
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 11
    INFORMATION SHUTTER P POWER !2 !1 !0 o i q LENS SHIFT button Activates the Lens shift function. (p.29) u INPUT button Switches input sources POWER ON-OFF button Cancels the selection and returns to the previous menu. Turns the projector on or off. (p.27, 28) r Point buttons (e, d, 7, and 8)
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 12
    Preparation Terminals w INPUT 1 q DIGITAL (DVI-D) ANALOG IN ANALOG OUT r INPUT 2 G B R H/V V INPUT 3 S-VIDEO VIDEO/Y Cb/Pb Cr/Pr e VIDEO/Y Cb/Pb Cr/Pr q INPUT 1 terminals e INPUT 3 terminals DIGITAL (DVI-D) (HDCP compatible) Connect digital output signal from a computer or video
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 13
    accepts digital signals only. (p.21, 73) e R/C JACK Connect the remote control to this jack with the wired remote cable (not supplied) to use the remote control as wired. (p.25) t USB (Series B) This port is used for the projector maintenance. y SERIAL PORT OUT This terminal outputs signal from
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 14
    u POWER ON-OFF button Turns the projector on or off. (p.27, 28) e LENS SHIFT button Activates the LENS SHIFT function. (p.29) i FOCUS buttons 29) !0 SELECT button Executes the item selected. t WIRED REMOTE JACK Connect the Wired Remote Cable (not provided) to this jack. Battery installation is
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 15
    SOUND P-TIMER INPUT 1 r MUTE !2 INPUT 4 INPUT 2 t CH REMOTE INPUT 5 INPUT 3 y ID !3 u !4 REMOTE RESET ON ALL OFF q MENU button Opens or closes the On-Screen Menu. (p.33, 34) o INFO button Displays the projector information. (p.30) w FREEZE button Freezes the projected picture. (p.31
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 16
    the projector with the wired remote cable (POA-CA-RC30) separatery supplied is recommended. (p.73) Connected with the wired remote cable, the remote control does not emit radio signal. SHUTTER D.ZOOM ON-OFF KEYSTONE LENS SHIFT ZOOM FOCUS Remote Control Channel and ID Setup Initial Remote Control
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 17
    the remote control to moisture, or heat. ● Do not drop the remote control. ● If a battery has leaked on remote control, carefully wipe case clean and install new batteries. ● Risk of explosion if battery is replaced by an incorrect type. ● Dispose of used batteries according to the instructions. 17
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 18
    setting up the projector, install optional lens in the projector. Install the lens following the instructions in the Lens Installation Manual provided. Ask the sales dealer for detailed information of optional lens specifications. Do not move the projector with holding the lens mounted and its
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 19
    to move the position of the projected image vertically by 50% and horizontally by 10% respectively without any image distortion. ✽ Lens shift range varies depending on lens and projectors. The range in this manual is the case of LNS-W04. 50% 10% 10% 50% Installation Level Adjustable Feet This
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 20
    electrical shock, do not plug into any other type of power system. Consult your authorized dealer or service station if you are not sure of type of the power being supplied. Connect the projector with all peripheral equipment before turning it on. (Refer to pages 22~24 for connection.) CAUTION For
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 21
    Interface Board Slots The projector's front terminal area has two replaceable Interface board slots. The projector's functions can be extended replace the optional interface boards as follows: Remove two (2) screws and uncover the slot. Insert an interface board into the slot along with the guides
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 22
    (HDB 15 pin) (Only one cable is supplied.) w DVI-D Cable ✽ e BNC Cable ✽ r Serial Cross Cable (RS-232C Not supplied with this projector.) PC Serial Port r✽ Monitor Output Monitor Output Monitor Input Monitor Output w✽ q q e✽ ANALOG IN ANALOG OUT R G B H/V V DIGITAL (DVI-D) SERIAL PORT IN
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 23
    Equipment (Digital and Video) Cables used for connection q Video Cable w S-Video Cable e DVI-D Cable ✽ Cables are not supplied with the projector. Installation Digital Output (HDCP compatible) Video Output e q S-Video Output w DIGITAL (DVI-D) VIDEO INPUT 3 S-VIDEO VIDEO/Y Cb/Pb Cr/Pr
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 24
    Connecting to Video Equipment (Component and RGB Scart) Cables used for connection q BNC Cable w Scart-VGA Cable e Component Cable ✽ Cables are not supplied with the projector. Component Video Output (Y, Pb/Cb, Pr/Cr) q Y Cb/Pb Cr/Pr RGB Scart 21-pin Output Component Video Output (Y, Pb/Cb, Pr/Cr
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 25
    . Any obstruction to air signal between the projector and the remote control may prevent the remote control from working properly. Wireless Remote Control Operation Wired Remote Control Operation R/C jack Wired Remote Cable (not provided) The wireless remote control does not work when the wired
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 26
    SHIFT MENU ZOOM CANCEL FOCUS SELECT AUTO PC ADJ. INPUT INFORMATION SHUTTER P POWER On-Off Lens Shift Zoom Focus Shutter Auto PC Adjust Input Selection Information Keystone Screen Selection Freeze P-Timer D. Zoom Remote CH and ID Menu Select Cancel ➔ Point buttons ➔ Point buttons ➔ Point buttons
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 27
    for connection.) 2 Turn on the MAIN On/Off switch of the projector. The LAMP indicator lights red, and the READY indicator lights green. 3 Press the POWER ON-OFF button on the top control or the remote control. The LAMP indicator dims, and the cooling fans start to operate. The preparation display
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 28
    remote control, and a message "Power off?" appears on the screen. 2 Press the POWER ON-OFF button again to turn off the projector. The LAMP POWER INDICATOR LIGHTS RED. OTHERWISE IT WILL RESULT IN SHORTENING LAMP LIFE. ✔Note: • The projector cannot be turned on for about 90 seconds after turned off
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 29
    Press the SHUTTER button to close the shutter inside the projector. To open up the shutter, press the SHUTTER button again. Refer to pages 53~54 for detail of setting for the Shutter function. Remote Control SHUTTER D.ZOOM ON-OFF KEYSTONE LENS SHIFT ZOOM FOCUS SHUTTER button ✔Note: • The SHUTTER
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 30
    not provided properly with this operation, manual adjustments are required. (p.41, 42 remote control to display Information window on the screen. To hide the Information window, press the INFORMATION/INFO button again. Use this menu to check the projector's operating condition when you face troubles
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 31
    . Press the KEYSTONE button on the remote control and correct vertical and horizontal distortions with the Point buttons (e, d, 7, and 8) or the Control pad. The Keystone adjustment can be memorized. (p.48) ✔Note: Horizontal keystone is ineffective for PLC-EF60A. Basic Operation • The arrows are
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 32
    with the SELECT button and pan the image with the Point buttons (e, d, 7, and 8) or the Control pad. D. Zoom - Press the D. ZOOM button on the remote control twice and then compress the image size with the SELECT button. ✔Note: To exit the D. Zoom +/- mode, try the followings: • To return to the
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 33
    and setting procedure. Top Control Operation 1 Press the MENU button on the projector's top control to display the On-Screen Menu. 2 Press the Point buttons SELECT button LENS SHIFT MENU ZOOM CANCEL FOCUS SELECT Point buttons Remote Control SHUTTER D.ZOOM ON-OFF KEYSTONE LENS SHIFT ZOOM
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 34
    Basic Operation On-Screen Menu SELECT button Menu icon Guide Currently selected menu. Control bar for Mouse Operation This bar appears when a USB mouse is connected to the USB terminal of the projector. Mouse cursor When clicking 77 or 88 on the control bar, menu icons rotate fast. When clicking 7
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 35
    Before selecting input sources with the top 36~37 control or the remote control, correct input source should be selected through menu operation. selects system detail and 44~46 store the adjusted image data in the projector to reproduce the customized image quality anytime. SCREEN SETTING :
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 36
    (Digital Visual Interface) from being copied. The specification of HDCP is decided and controlled by Digital Content Protection, LLC. Should the specification be changed, this projector may not display the digital content protected by HDCP. 36
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 37
    Input Input 2 Move a pointer to Input 2 and press the SELECT button. RGB When the input source is analog coming from a computer through the Input 2 (5 BNC-type: Red, Green, Blue, H. Sync., and V. Sync.) terminal, select RGB. Video When video input signal is connected to the Input 2 (VIDEO)
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 38
    this projector is shown on pages 70~71 ) ✔Note: The projector may display one of the following messages. Mode 1 User preset system manually adjusted input from computer. Check the connection of your computer and the projector. (See "Troubleshooting" on page 68) *SVGA 1 and Mode 1 are examples.
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 39
    system, and adjusts itself to optimize its performance. When Video System is PAL-M or PAL-N, select system manually. PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N If the projector cannot reproduce proper video image, it is necessary to select a specific broadcast signal format from among PAL, SECAM
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 40
    on the remote control unit. (p.15, 30) To store adjustment parameters Adjustment parameters from Auto PC Adjustment can be memorized in this projector. Once function. When the image is not provided properly with this operation, manual adjustments are required. (p.41, 42) • Auto PC Adjustment function
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 41
    PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has 50 independent memory areas to memorize those parameters adjusted manually. It allows you to recall the setting for a specific computer easily. 1 Press the MENU button to display On
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 42
    Computer Adjustment Position Adjusts picture position. V-sync phase Adjust this item when the projected image is affected by the noise from the external equipment. (From 0 to 15) ✔Note: V-sync phase is not displayed as the item is initially checked off on My menu in the Setting menu. Change the My
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 43
    the SELECT button. Image Menu (PC) IMAGE icon For PC Input Standard Normal picture level preset on this projector for PC mode. Real Picture level with improved halftone for graphics. IMAGE 1~10 User preset picture adjustment in IMAGE ADJ. menu (p.44~46). Move the yellow frame pointer to an image
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 44
    color level, phase and gamma of the selected spot of the projected image and exchange the original color with the adjusted one. The projector can store up to eight color management data. Color selection Press the SELECT button when Color management is highlighted and then Color management pointer
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 45
    Image Adjustment Move the pointer to one of the followings with the Point buttons (e, d, 7, and 8) or the Control pad and press the SELECT button. LIST displays Color Management List window to store the adjustment data. COLOR.M ..returns to the previous image with the Color management pointer.
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 46
    video signal is displayed in a progressive picture. Film This function is effective on 2:3 or 2:2 pulldown video sources. With this function "On," the projector reproduces pictures faithful to the original film quality. Store To store the adjustment data, move an yellow frame pointer to Store and
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 47
    values to zero. Quit . . . . . .exits the Aspect setting menu. ✔Note: The adjusted aspect can basically be memorized for each input even if the projector is turned off. Screen Setting Menu Screen Setting icon Screen (Custom) Aspect Setting Menu Move the pointer to an item to set and adjust value
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 48
    reversed. This function is used to project the image from a ceiling mounting the projector. Rear When this function is "On," the picture is left/right the source to the projector. • The image data in other than XGA (1024 x 768 for PLC-XF60A) or SXGA (1400 x 1050 for PLC-EF60A) is modified to fit
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 49
    Setting Setting Setting changes various settings: Language, Menu, Logo, Background, Lamp, Remote control, Display, Input search, Power management, On start, Analog out, Lens memory, Shutter, Security, and Factory default. 1 Press the MENU button to display On-Screen Menu. Spin Menu icons with the
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 50
    the projected image, go to the Logo function and set it to "My logo." Then the captured image can be displayed when turning on the projector next time. (p.27) To capture the image, select [Yes]. To cancel the Capture function, select [No]. ✔Note: • Before capturing an image, select Standard in the
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 51
    of the two lamps does not light up, the LAMP 1/2 REPLACE indicator blinks orange and the projector will light the other automatically. • After changing the lamp mode, it cannot be switched again for 90 seconds. Remote control Four (4) remote control channels and eight (8) remote control ID are
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 52
    the projector may not display the image properly. Power management For reducing power consumption as well as maintaining the lamp life, the lamp is turned on if the input signal is reconnected or any button on the top control or remote control unit is pressed. Shut down . . .When the lamp has
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 53
    . . .20% light blocking Protection Prohibits the shutter operation from the remote control and the projecto's top control. Remote control . . Selecting "On" prohibits the shutter operation from the remote control. Projector Selecting "On" prohibits the shutter operation from the top control. It is
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 54
    in this condition, the projection lamp is turned on and the SHUTTER remote control. It is used to prevent the projector from being operated by an unauthorized person. Projector locks operation from the top control. To unlock, use the remote control. Remote control . .locks operation from the remote
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 55
    lock settings. If you entered a wrong PIN code, the number turns red and disappear. Enter a PIN code all over again. Enter a PIN code When the projector is locked with the PIN code, the PJ lock mark appears at top left of the Main menu. The input numbers change to "✳" for security
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 56
    Factory default This function returns all setting values to the factory default settings except for those including: User logo, PJ PIN code, Logo PIN code, Security setting, Lamp time, Filter time, and PJ time. Quit Exits the Setting menu. Factory default Select Factory default and this box
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 57
    SELECT button. ✔Note: Option box cannot be selected when it is not mounted on the projector. For the information of the Smoke Resist Box, refer to Optional Parts on page 73 and contact the sales dealer or the service station. Filter Move the pointer to Reset and then press the SELECT button and
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 58
    , press the CANCEL button on the top control or the remote control. RS-232C This feature allows users to set serial communication configuration (baud rate and the projector ID) when connecting several projectors via the RS-232C terminal of the projector. (p13, 78) Baud rate . . . . .9600 / 19200
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 59
    of the projector. Up to 50 logs can be displayed. Log contents are as follows: Lamp-1 failure Lamp-2 failure Lamp-1 timeover Lamp-2 timeover Power Screen, Language, Lamp mode, Lamp status, Power management, Shutter management, Smoke resist, Option filter time, Security, and Remote control. 1 Press
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 60
    service station for check and repair. CAUTION DO NOT LEAVE THE PROJECTOR WITH THE AC POWER CORD CONNECTED UNDER THE ABNORMAL CONDITION. IT MAY RESULT IN FIRE OR ELECTRIC SHOCK. TOP CONTROL LAMP 1 REPLACE, WARNING TEMP, WARNING FILTER, READY, SHUTTER , and LAMP 2 REPLACE blinking altogether. LAMP
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 61
    , the WARNING FILTER indicator may light orange even the air filter is clean. ORDER REPLACEMENT FILTER When ordering the replacement air filter, give the following information to the dealer. ● Model No. of your projector : ● Replacement Filter Part No. : PLC-XF60A / PLC-EF60A 610 315 1588
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 62
    glass bulb! The glass can shatter and may cause injury. Allow a projector to cool, for at least 45 minutes before you open the Lamp cover. The inside of the projector can become very hot. Top Control LAMP 1 REPLACE indicator LAMP 2 REPLACE indicator These indicators light orange when the life of
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 63
    Maintenance and Cleaning ORDER REPLACEMENT LAMP Replacement Lamp can be ordered through your dealer. When ordering a Projection Lamp, give the following information to the dealer. ● Model No. of your projector : ● Replacement Lamp Type No. : PLC-XF60A / PLC-EF60A POA-LMP80 (Service Parts No. 610
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 64
    the lens. 3 When the projector is not in use, replace the lens cover. Cleaning the Projector Cabinet Follow these steps to clean the projector cabinet Attaching the Cord Cover Strap When mounting the projector on the ceiling, connect the front cover to the projector with the provided cord cover strap
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 65
    down enough and the temperature returns to normal, the LAMP indicator lights red and the projector can be turned on. READY, WARNING TEMP, SHUTTER, WARNING FILTER, LAMP 1 REPLACE, AND LAMP 2 REPLACE indicators are blinking all together. The projector has been cooled down enough and the temperature
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 66
    cooling mode.) In this case, contact the service station immediately. Warning Filter Indicator Indicators READY Green LAMP Red WARNING FILTER Orange Projector Condition Slow The air filter is clogged with dust or has been used overtime. The air filter has been used overtime. 66 The air
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 67
    three times at regular intervals and the projector cannot be turned on. ✽ When the LAMP 1 REPLACE indicator and the LAMP 2 REPLACE indicator light orange, replace the projection lamps with new ones promptly. And then reset the Lamp time after replacement of the lamps. See pages 57, 62, and 63. 67
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 68
    page 60) - Check the projection lamp. (☞ p.62) - Unlock Key lock for the projector in the Setting Menu. (☞ p.54) - Check if the air filter is fully installed and the filter cover is completely closed. (☞ p.61) - Adjust focus of the projector. (☞ p.29) - Check the projection lens to see if it needs
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 69
    49) Appendix WARNING : High voltages are used to operate this projector. Do not attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Give the model number and explain about the
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 70
    Appendix Compatible Computer Specifications Basically this projector can accept a signal from all computers with V- and H-Frequency mentioned below and less than 230 MHz of Dot Clock. ON-SCREEN DISPLAY VGA 1 VGA 2 VGA 3
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 71
    Appendix When a input signal is digital from DVI terminal, refer to chart below. ON-SCREEN DISPLAY D-VGA D-480p D-575p D-SVGA D-XGA D-WXGA1 D-WXGA2 D-WXGA3 RESOLUTION 640 x 480 720 x 480 (Progressive) 768 x 575 (Progressive) 800 x 600 1024 x 768 1366 x 768 1360 x 768 1376 x 768 H-Freq. (kHz) 31.
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 72
    Temperature Storage Temperature Remote Control RF Remote Standard Frequency Band Battery Operating Range Dimensions Net Weight Multi-media Projector 20.39" x 9.92" x 23.86" (518mm x 252mm x 606mm) (Not including adjustable feet) 54.3 lbs (24.7kg) 0˚ to 3.65˚ PLC-XF60A 1.4" TFT Active Matrix
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 73
    's Manual (CD-ROM + Quick Reference Guide) AC Power Cord Remote Control and Batteries VGA Cable Lens Attachment Light Block Plates (2 types) Real Color Manager Pro (CD-ROM) Cord Cover Strap Security Label (PIN Code/USB Key) ● The specifications are subject to change without notice. ● LCD panels
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 74
    Appendix Menu Tree INPUT Input 1 Input 2 Input 3 Input 4 Input 5 RGB (PC Analog) RGB (Scart) RGB (PC Digital) RGB (AV HDCP) RGB Video Y, Pb/Cb, Pr/Cr Video Y, Pb/Cb, Pr/Cr S-Video Optional Slot Optional Slot System (1) Auto System (1) System (1) System (1) System (2) System (3) System (2)
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 75
    CH 1- 4 2-Lamp 1-Lamp ID 1- 8 Off/On Off/On Off/Ready/Shut down 1 ~ 60 minutes Auto Lamp1 Lamp2 On start Analog out Lens memory Shutter Security Factory default Quit Off/On Off/On Input 1-5 Off Level Memory Normal High contrast Protection Management Remote control Projector 5 ~ 180
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 76
    management Shutter management Smoke resist Option filter time Security Remote control Quit SPECIAL Lamp Fan control Filter Auto PC adj. Test pattern RS-232C USB memory Warning log Quit Lamp 1 Lamp 2 Normal W Hour(s) Reset W Hour(s) Reset Yes/No Yes/No Max Projector Option box Off/On Cross
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 77
    Dimensions Unit : inch (mm) 9.92 (252) 20.39 (518) Appendix 7.24 (184) 5.31 (135) 3.65˚ (Max.) 23.86 (606) Appendix 18.11 (460) 13.58 (345) 14.52 (369) Screw Holes for Ceiling Mount Screws: M8 Depth: 0.31(8.0) 2.36 (60) 18.27 (464) 9.15 (232.5) 9.15 (232.5) 1.08 (27.5) 77
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 78
    Appendix Terminal Configurations ANALOG INPUT / OUTPUT TERMINAL (ANALOG) Terminal: HDB15-PIN 54 32 1 10 9 8 7 6 15 14 13 12 11 1 Red (R/Cr) Input / Output 2 Green (G/Y) Input / Output 3 Blue (B/Cb) Input / Output 4 ----- 5 Ground (Horiz.sync.) 6 Ground (Red) 7 Ground (Green) 8 Ground (
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 79
    Number Memo Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. PIN Code Lock No. Factory default set No: 1 2 3 4* Logo PIN Code Lock No. Factory default set
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 80
    K Keylock 54 Keystone 26, 31, 48 L Lamp 51, 57 Lamp Control 51 Lamp Mode 51 Lamp Replace Indicator 67 Lamp Replacement 62 Language 50 Lens Installation 18 Lens memory 53 Lens Shift 2, 19, 26, 29 Logo 50 Logo Lock 50 Logo PINcode 50 Logo Select 50 M Manual PC Adjust 41 Menu 49 Menu
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 81
    management 52 Progressive 46 Projector Condition 65 Projector ID 58 R Radio Wave 17 READY indicator 10 Real 43 Rear 48 Reference Buttons 26 Remote Control 14, 16, 72 Remote control 51 Remote Control Battery Installation 17 Remote Control Channel and ID 16 REPLACEMENT LAMP 61, 63 RESET
  • Sanyo XF60 | Instruction Manual, PLC-XF60A - Page 82
    Printed in Japan Part No. 610 327 9398 (1AA6P1P5077-- KH6A) SANYO Electric Co., Ltd.
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
Owner's Manual
PLC-XF60A
PLC-EF60A
Multimedia Projector
MODEL
✽
Projection lens is optional.