Sanyo XF70 Instruction Manual, PLC-XF70

Sanyo XF70 - PLC XGA LCD Projector Manual

Get Sanyo XF70 - PLC XGA LCD Projector PDF manuals and user guides
UPC - 086483069901
View all Sanyo XF70 manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo XF70 manual content summary:

  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 1
    Multimedia Projector MODEL PLC-XF70 Owner's Manual ✽ Projection lens is optional.
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 2
    function reduces power consumption and maintains lamp life (p.52). ◆ Automatic Filter Replacement Function The projector monitors the condition of the filter and replaces a filter automatically when it detects the clogging. ◆ Shutter Function The projector is equipped with the shutter that
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 3
    Filter Counter 59 Resetting the Scroll Counter 59 Lamp Management 60 Lamp Replacement 61 Resetting the Lamp Counter 62 Cleaning the Projection Lens 64 Cleaning the Projector Cabinet 64 Warning Indicators 65 Appendix 66 Troubleshooting 66 Menu Tree 69 Indicators and Projector
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 4
    NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Safety Precaution WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. - This projector produces intense light from the projection lens. Do
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 5
    and instructions marked on the projector. This projector should be operated only from the type of power source indicated on projector exhibits a distinct change in performance-this indicates a need for service. When replacement parts are required, be sure the service technician has used replacement
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 6
    reaches a time set in the timer setting, a Filter replacement icon (Fig. 1) appears on the screen and WARNING FILTER indicator on the top panel lights up (see below), indicating that the filter replacement is necessary. If the projector detects that the filter is clogged and no scroll is left in the
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 7
    Safety Instructions Installing the Projector in Proper Directions Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe accident or fire hazard. This projector can project the picture in upward, downward, or inclined position in
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 8
    case. This may cause damage to the projector. For information about transporting the projector by courier or any other transport service, consult your dealer. -Do not put the projector in a case before it is cooled enough. -Do not transport the projector with a replacement lens installed. 
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 9
    used in accordance with the instruction manual, may cause harmful interference replacement fuse cover is required, ensure it is of the same colour as that visible on the pin face of the plug (i.e. red or orange). Fuse covers are available from the Parts Department indicated in your User Instructions
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 10
    Lens Mount Cover w Projection Lens (Option) e Indicators r Infrared Remote Receiver (Front) t Adjustable Feet y Terminals and Connectors u Handle i Side Control o Lamp Cover !0 Infrared Remote Filter ✽Kensington Security Slot This slot is for a Kensington lock used to deter theft of the projector.
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 11
    to this terminal. e USB CONNECTOR (Series B) USB connector is to used to service the projector. r R/C JACK When using the wired remote control, connect the wired remote control to this jack with a remote control cable (not supplied). [ RESET button A built-in micro processor which controls this
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 12
    Side Control and Indicators INDICATORS SIDE CONTROLS Side Controls q u w i e o !0 r t !1 y q ON/STAND-BY button Turn the projector on or off. the computer image to its optimum setting. (p.27) 12 u LENS SHIFT button Select the LENS SHIFT function. (p.27) i FOCUS button Adjust the focus.
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 13
    when the clogging of the filter is detected or the filter counter reaches a time set in the timer setting, urging immediate filter/ filter cartridge replacement (pp.56, 57, 74). t SHUTTER indicator Light blue when the shutter is closed. (p72) y LAMP 2 REPLACE indicator Turn orange when the life
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 14
    projector on or off. (pp.23-24) w AUTO PC button Automatically adjust the computer image to its optimum setting (pp.29, 35). e LIGHT button Light the buttons on the remote . (pp.38, 42) @0 FILTER button Scroll the filter (p.30). @1 Wired Remote Jack Connect the remote control cable (not supplied) to
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 15
    . ● Risk of an explosion if battery is replaced by an incorrect type. ● Dispose of used batteries according to the instructions. Remote Control Receivers and Operating Range Point the remote control toward the projector (to Infrared Remote Receivers) when pressing the buttons. Maximum operating
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 16
    or video equipment next to each other are operated at the same time. Change the remote control code for the projector first before changing that for the remote control. See "Remote control" in the Setting Menu on page 52. 1 Check the Reset Switch to "Use position" in the compartment lid on
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 17
    use the optional lens below for this projector. Otherwise damages may result. LENS MODEL NO. : LNS-T01, LNS-T01Z - Lens installation and replacement should be made by the qualified service personnel. - When setting the projector after lens installation, be sure to replace a Lens Cap to protect
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 18
    of the display. When the lens is shifted to leftmost. When the lens is shifted to rightmost. projector, rotate the feet clockwise. To lower the projector or to retract the adjustable feet, rotate the feet counterclockwise. To correct keystone distortion, press the KEYSTONE button on the remote
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 19
    of interface board, turn off the projector, press the Main On/Off Switch to Off and unplug the AC power cord from the AC outlet. 1 Remove 2 Screws from an interface board. 2 Pull out the interface board. 3 Replace the interface board. Insert a new interface board along Guide to fit Plug into Socket
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 20
    • VGA Cable (D-sub 15 pin) * • DVI Cable • BNC Cable (BNC x 5) ( *One cable is supplied; Other cables are not supplied with this projector.) Laptop type Desktop type Monitor Output Monitor Output Monitor Output DVI Cable DIGITAL VGA Cable BNC Cable ✽ ANALOG G B R H/HV V Terminals of the
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 21
    used for connection • Video Cable (BNC x 3, BNC x 1) • SCART-VGA Cable • DVI Cable • S-Video Cable ( Cables are not supplied with the projector.) Video Source (example) Video Cassette Recorder Video Disc Player Installation Component video output equipment. (such as DVD player or high-definition
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 22
    . If you are not sure of the type of power being supplied, consult your authorized dealer or service station. Connect the projector with all peripheral equipment before turning on the projector. CAUTION The AC outlet must be near this equipment and must be easily accessible. ✔Note: •U nplug the
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 23
    turning on the projector. 2 Connect the projector's AC power cord into an AC outlet and turn on the MAIN ON/OFF Switch. The LAMP indicator lights red and the READY indicator lights green. 3 Press the ON/STAND-BY button on the side control or on the remote control. The LAMP indicator dims red and
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 24
    and "Power off?" appears on the screen. 2 Press the ON/STAND-BY button on the side control or on the remote control again to turn off the projector. The LAMP indicator lights bright and the READY indicator turns off. After the projector is turned off, the cooling fans operate. You cannot turn on the
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 25
    How to Operate the On-Screen Menu The projector can be adjusted or set via the On-Screen Menu. For each adjustment and setting procedure, refer to the respective sections in this manual. 1 Press the MENU button on the side control or the remote control to display the On-Screen Menu. 2 Use the Point
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 26
    Rear/Reset/Digital zoom +/-] (pp.39-40). i Setting Menu Used to set the projector's operating configurations (pp. 48-56). o Information Menu Display the input source information(p. 28). For Video Source q w e r tyu i q Guide Window Show the selected Menu of the On-Screen Menu. w Input Menu Used
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 27
    red when the lens shift comes to the center position of the screen. ✔Note: • The SHUTTER button on the side control and the remote control cannot be effective when Shutter Protection is "On" in the Setting menu. (p.55) • The SHUTTER indicator on the projector's top lights blue when the shutter
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 28
    Basic Operation Information Information display can be used to confirm the current operating condition of the projector and the signal being projected through the projector. Press the INFORMATION button to display the information window on the screen. To hide the information window, press the
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 29
    Adj. function. The computer screen adjustment can be done easily by pressing this button. See page 35 for details. LENS SHIFT button See page 27 for details. ZOOM buttons Press the ZOOM buttons on the remote control to zoom in and out the image. FOCUS buttons Press the FOCUS buttons on the
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 30
    replace the filter mechanically. ✔Note: •The filter cannot be rewound. • When the filter is replaced, the total accumulated time of the filter use is automatically set to 0. IMAGE ADJ. button Press the IMAGE ADJ. button on the remote indicate that there is no correction. • A red arrow indicates
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 31
    control. It switches to INPUT 1, INPUT 2, INPUT 3 or INPUT 4 as you press the INPUT button. Before using the INPUT button on the remote control, you must select a correct input source by On-Screen Menu and the latest input source will be displayed. ✔Note: •Empty slots cannot be selected. •
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 32
    Input Selection Computer Input Source Selection Menu Operation When Selecting the INPUT 1 with DVI/D-sub 15 terminals 1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the INPUT Menu icon. INPUT MENU 2 Use the Point ed buttons to
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 33
    Visual Interface) from being copied. The specification of HDCP is decided and controlled by Digital Content Protection, LLC. Should the specification be changed, this projector may not display the digital content protected by HDCP. •When a slot is empty, the input is displayed in grayout. 33
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 34
    . (pp. 36-37.) There is no signal input from the computer. Check the connection between your computer and the projector. (See "Troubleshooting" on page 66.) Mode 1 The preset system is manually adjusted in the PC Adjust Menu. The adjusted data can be stored in the Mode 1-10. (pp. 36-37) SVGA
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 35
    pressing the AUTO PC button on the remote control or the AUTO PC ADJ. button on the side control. Remote Control AUTO PC button Side Control Menu in the projector. Once the parameters are stored, the setting can be done just by selecting Mode in PC SYSTEM Menu (p.34). See MANUAL PC ADJUSTMENT on
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 36
    Adjustment enables you to precisely adjust several parameters to match those special signal formats. The projector has 10 independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific computer. ✔Note: The PC Adjust Menu cannot be operated
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 37
    Computer Input Reset To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select [Yes]. All adjustments will return to their previous figures. Mode free To clear the adjusted data, select Mode free and then press the SELECT button. Move the red
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 38
    Operation Press the IMAGE SEL. button on the remote control to select the desired image level. Remote Control Standard Real Image1 • • • Image 10 picture level preset on the projector. Real Picture level with improved halftone for graphics. IMAGE 1-10 User preset picture adjustment in the Image
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 39
    original image size is larger than the screen size (1024 x 768), the projector enters to the panning mode automatically. Use the Point ed7 8 buttons to Menu is used. (p. 37) Custom Adjust the screen scale and position manually with this function. Press the SELECT button at Custom and the "Custom"
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 40
    . This function is used to project the image from a ceiling-mounted projector. Rear When this function is set to "On," the picture is left also enter the Digital zoom + mode by pressing the D.ZOOM button on the remote control. Digital zoom - Select Digital zoom -. The On-Screen Menu disappears and
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 41
    signal, and adjusts itself to optimize its performance. When the Video System is 1035i or 1080i, select the system manually. COMPONENT VIDEO SIGNAL FORMAT If the projector cannot reproduce proper video image, select a specific component video signal format from among 480i, 575i, 480p, 575p, 720p
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 42
    Operation Press the IMAGE SEL. button on the remote control to select the desired image level. Remote Control Standard Cinema Image1 • • • Image 10 Normal picture level preset on the projector. Cinema Picture level adjusted with fine tone. IMAGE 1-10 User preset picture adjustment in the Image
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 43
    at the normal video aspect ratio of 4:3. Wide Provide the image at the wide screen ratio of 16:9. Custom Adjust the screen scale and position manually with this function. Press the SELECT button at Custom and the "Custom" is displayed on the screen for a few seconds. To display the Aspect dialog
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 44
    function is set to "On," the picture is top/bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector. Rear When this function is set to "On," the picture is left/right reversed. This function is used to project the image from the rear
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 45
    can be used to adjust the LEVEL, PHASE, and GAMMA of the selected display colors (except for black, white, and gray) on the screen and replace these colors with other colors if required. You can store up to eight (8) color management data. 1 Use the Point ed buttons to move the red
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 46
    Image COLOR SELECTION MODE (continued) COLOR M. Return to the COLOR MANAGEMENT POINTER. (If you press the MENU button on the side control or the remote control, it returns to the COLOR MANAGEMENT POINTER and you will need to reselect and readjust the color.) MENU Return to the IMAGE ADJUST Menu.
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 47
    mode. Off . . . . . Progressive scan mode is "Off." On . . . . . Progressive scan mode is "On." Film . . . . For watching a film. With this function, the projector reproduces pictures faithful to the original film quality. ✔Note: •Picture is distorted at the moment of On/Off /Film switching. Reset
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 48
    when turning on the projector. Use this function when you want to project the image as early as possible even when the lamp is not bright enough. when no input signal is detected. Blue . . . . Blue colored background. User . . . . The image you captured. Black . . . Black colored background
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 49
    the projected image. After capturing the projected image, go to the Logo select function and set it to "User". Then the captured image will be displayed the next time you turn on the projector. To cancel the Capture function, select [No]. ✔Note: •Before capturing an image, select "Standard" in the
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 50
    PIN code is set to "4321" at the factory. Enter a Logo PIN code Use the Point ed buttons on the side control or on the remote control to enter a number. Press the Point 8 button to fix the number and move the red frame pointer to the next box. The number changes
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 51
    : • When neither of the two lamps is lighted, the projector will shutdown automatically. • When either of the two lamps does not light up, the LAMP 1/2 REPLACE indicator blinks orange and the projector will light the other automatically. • After changing the Lamp Mode, it cannot be switched again
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 52
    has been fully cooled down, the READY indicator starts blinking. In this condition, the projection lamp is turned on if the input signal is reconnected or any button on the side control or remote control is pressed . Shutdown . . When the lamp has been fully cooled down, the power is turned off
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 53
    the side control accidentally becomes locked and you do not have the remote control nearby and unable to operate the projector, contact the service station. PIN code lock This function prevents the projector from being operated by unauthorized persons and provides the following setting options for
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 54
    Point ed buttons on the side control or on the remote control to enter a number. Press the Point 8 button pin code, the projector can no longer be started. Projector ID This feature allows users to set serial communication configuration (Projector ID) when several projectors are connected via the
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 55
    dialog box turns red and the Lamp replacement icon appears on the screen, indicating that the end of lamp life is approaching. When replacing the projection lamp, reset the lamp counter. See "Resetting the Lamp Counter" on page 62. ✔Note: •The Lamp replacement icon will not appear when the Display
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 56
    filter needs replacement. To replace the filter, use the filter control function (p.51). Test pattern Various test pattern are available for use when setting up the projector. Factory default This function returns all setting values except for the user logo, PIN code lock, Logo PIN code lock, lamp
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 57
    when it detects the clogging. If the projector reaches a time set in the timer setting (p. 56), a Filter replacement icon (Fig.1) appears on the screen and the WARNING FILTER indicator on the top panel lights up (p.74). When you see this icon, replace the filter as soon as possible (pp.30, 51
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 58
    station for proper cleaning. ORDER REPLACEMENT FILTER CARTRIDGE Replacement filter cartridge can be ordered through your dealer. When ordering, give the following information to the dealer. ● Model No. of your projector PLC-XF70 ● Replacement Filter Cartridge Service Parts Cord: 610 335 9830
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 59
    . Select [Yes] to continue. 4 Another confirmation dialog box appears, select [Yes] to reset the Filter counter. Resetting the Scroll Counter Be sure to reset the Scroll counter after replacing the filter cartridge. 1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 60
    . When the image becomes darker or the color becomes unnatural, replace lamp. (LAMP 1/2 REPLACE indicator lights orange.) (LAMP 1/2 REPLACE indicator flashes orange.) Projection lamp is defective or fails to be turned on. Restart the projector on, and make sure lamp is on. If this mark still appears
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 61
    a new one promptly. The timing when the LAMP 1/2 REPLACE indicators should light is depending on the lamp mode. Indicators WARNING: TURN OFF THE UV LAMP BEFORE OPENING THE LAMP COVER. Lamp replacement icon LAMP 1 / 2 REPLACE indicators Allow the projector to cool, for at least 45 minutes before
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 62
    to reset the lamp counter. ORDER REPLACEMENT LAMP Replacement Lamp can be ordered through your dealer. When ordering a Projection Lamp, give the following information to the dealer. ● Model No. of your projector : PLC-XF70 ● Replacement Lamp Type No. : POA-LMP104 (Service Parts No
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 63
    i.e., if the LAMP 1/2 REPLACE indicators light up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down. (Follow carefully the instructions in the Lamp Replacement section of this manual.) Continuous use of the lamp with the LAMP 1/2 REPLACE indicators lighted may increase
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 64
    Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents, or other harsh chemicals might scratch the surface of the lens. Cleaning the Projector Cabinet Turn off the projector, press the Main On/Off Switch to Off and unplug the AC power cord from the AC outlet before cleaning. Gently
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 65
    Duct or Vent? Move the installation of the projector away from the duct or vent. - Is the filter clean? Replace the filter with a new one. The projector is shut down; and the LAMP indicator is lighting and other indicators are blinking. When the projector detects an abnormal condition, it will be
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 66
    solutions. Problem: No power. Solutions - Plug the power cord of the projector into the AC outlet. - Turn the MAIN ON/OFF switch to ON. - Press the ON/STAND-BY Button to ON. - Make sure the READY Indicator lights. - Check the indicators. If the LAMP indicator lights and the other indicators blink
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 67
    lamp life is approaching. Replace the lamp with a new one promptly. (See page 55) -The filter is out of scroll. Replace the filter cartridge with a new one promptly. (See pages 57-58) appears on the screen The image is out of focus. - Adjust the focus of the projector. - Check Projection Lens
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 68
    center. WARNING: High voltages are used to operate this projector. Do not attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Specify the model number and explain about the
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 69
    (2) Information Information Image Adjust Input H-sync freq. V-sync freq. Screen Language Lamp mode Lamp control Power management Shutter management Remote Control Projector Security 5 - 180 Min Key lock Remote control PIN code lock Image Adjust Contrast Brightness Color ] Tint ] Color
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 70
    Appendix Computer Input System (1) Mode 1 Mode 2 SVGA 1 SVGA 2 SVGA 3 ✽ System displayed in the System Menu varies depending on the input signal. PC Adjust Auto PC adj. Fine sync. Total dots Position H Position V Current mode Clamp Display area - H Display area - V Reset Mode free Store Quit
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 71
    Off Key lock PIN code lock Projector ID Shutter Quit 1-999 Protection Off Projector Remote Control Off/On1/On2 PIN code change Quit Remote control Projector On / Off On / Off Management Quit Lamp counter Hour(s) 5 - 180 Min. Reset Yes/No Quit Filter counter Test pattern Factory default
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 72
    the ON/STAND-BY button to turn on the projector. ✽ ✽ The filter is scrolled using the FILTER button on the remote control or the Filter control function in the setting menu. When the filter is being scrolled, the Filter replacement icon and "Please wait..." message (Fig. 1) appear on the
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 73
    returns to normal. When turning on the projector, the WARNING TEMP. indicator stops blinking. Check and replace the filter. ✽✽ The lamp cannot light up. (The projector is preparing for stand-by or the projection lamp is being cooled down. The projector cannot be turned on until cooling is
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 74
    and the WARNING FILTER indicator on the top panel lights up. Replace the filter as soon as possible. If the filter is out of scroll and the projector reaches a time set in the timer setting, Fig. 3 appears on the screen and the WARNING FILTER indicator lights up. Replace the filter cartridge as soon
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 75
    Appendix Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V- and H-Frequency mentioned below and less than 230 MHz of Dot Clock. PC Adjustment can be
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 76
    Appendix When an input signal is digital from the DVI terminal, refer to the chart below. ON-SCREEN DISPLAY D-VGA D-480p D-575p D-SVGA D-XGA D-WXGA 1 D-WXGA 2 D-WXGA 3 D-WXGA 4 D-WXGA 5 D-WXGA 6 D-WXGA 7 D-WXGA 8 D-WXGA 9 D-WXGA 10 D-SXGA 1 D-SXGA 2 RESOLUTION H-Freq.(kHz) V-Freq.(Hz) 640x480
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 77
    batteries) Accessories Owner's Manual (CD-ROM) Quick Reference Guide AC Power Cord Remote Control and Batteries VGA Cable PIN Code Label Lens Attachments (2 types) (For option lens) Light Block Plates (3 types) (For option lens) Spacer (For option lens) Real Color Manager Pro (CD-ROM) Mounting
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 78
    ineffective by the characteristics of the LCD panels. ● E ach projector has its own characteristics. When projecting with several projectors on the same screen or side Model No. to the sales dealer. Model No. Wired Remote Cable(30m) Optional Interface Board (DVI) : POA-CA-RC30
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 79
    Configurations of Terminals ANALOG (Mini D-sub 15 pin) 54 32 1 10 9 8 7 6 15 14 13 12 11 1 Red Input 2 Green Input 3 Blue Input 4 No Connect 5 Ground (Horiz.sync.) 6 Ground (Red) 7 Ground (Green) 8 Ground (Blue) 9 +5V Power 10 Ground (Vert. sync.) 11 Ground 12 DDC Data 13 Horiz. sync. 14 Vert.
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 80
    Number Memo Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. PIN Code Lock No. Logo PIN Code Lock No. Factory default set No: 1 2 3 4* Factory default set
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 81
    Dimensions Unit: inch (mm) 20.87(530) 4.72(120) 5.81(147.5) 9.63(244.5) 10.53(267.5) Appendix Screw Holes for Ceiling Mount Screw: M8 Depth: 0.393 (10.0) 8.66(220) 8.46(215) 1.18(30) 5.00(127) 3.03(77) 10.43(265) 6.89(175) 8.27(210) 7.28(185) 23.62(600) 26.77(680) 29.80(757.0) 10.89(276
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 82
    C05 C06 C07 C08 C0D C0E C0F C10 C1C C1D C3A Function Turn the projector ON Turn the projector OFF (immediately OFF) Select Input 1 Select Input 2 Select Input 3 Select DOWN Focus UP Lens shift UP Lens shift DOWN Lens shift LEFT Lens shift RIGHT Auto PC Adj. Keystone UP Keystone DOWN
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 83
    command. Cooling down at Power Management mode Power Management mode after Cooling down Cooling down after the projector is turned off when the lamps are out. Stand-by mode after Cooling down when the lamps are out. Stand-by mode after Cooling down at the temperature anomaly. Cooling down when the
  • Sanyo XF70 | Instruction Manual, PLC-XF70 - Page 84
    KS3A SANYO Electric Co., Ltd.
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
Multimedia Projector
MODEL
PLC-XF70
Owner’s Manual
✽
Projection lens is optional.