Sanyo XP50L Instruction Manual, PLC-XP50

Sanyo XP50L - PLC XGA LCD Projector Manual

Get Sanyo XP50L - PLC XGA LCD Projector PDF manuals and user guides View all Sanyo XP50L manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo XP50L manual content summary:

  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 1
    Multimedia Projector MODEL PLC-XP50 PLC-XP50L (Lensless) Owner's Manual
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 2
    EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE OWNER'S MANUAL WITH
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 3
    Follow all warnings and instructions marked on the projector. For added protection to the projector during a lightning storm, projector exhibits a distinct change in performance-this indicates a need for service. When replacement parts are required, be sure the service technician has used replacement
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 4
    instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Model Number Trade Name Responsible party Address Telephone No. : PLC-XP50/PLC-XP50L : Sanyo : SANYO plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 5
    21 CLEANING PROJECTION LENS 43 21 LAMP REPLACEMENT 44 21 LAMP REPLACE COUNTER 45 21 TROUBLESHOOTING 46 21 INDICATORS AND PROJECTOR CONDITION 48 22 22 COMPATIBLE COMPUTER SPECIFICATION 49 22 MENU TREE 50 22 TECHNICAL SPECIFICATIONS 52 CONFIGURATIONS OF TERMINALS 53 OPTIONAL
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 6
    LCD) technology. N Compact Design This projector is extremely compact in size and weight. It is designed to carry and work anywhere you wish to use. N Compatibility This projector computer between XGA (1024 x 768) and SXGA (1280 x 1024) is compressed into 1024 x 768 dots. This projector cannot
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 7
    INFRARED REMOTE RECEIVER HOT AIR EXHAUSTED ! Air blown from exhaust vent is hot. When using or installing a projector, following LAMP COVER CARRYING HANDLE BOTTOM OF CABINET When attached the PJ-Net organizer (optional part) to the projector, remove the these parts. Refer to the owner's manual
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 8
    plug into any other type of power system. Consult your authorized dealer or service station if you are not sure of type of power supply being in use. Connect a projector with a peripheral equipment before turning a projector on. (Refer to pages 12 ~ 14 for connection.) CAUTION For safety, unplug AC
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 9
    NOTE: The figures below are only for Model PLC-XP50. Projection lens is not provided with Model PLC-XP50L. G This projector is designed to project on a flat projection surface. G Projector can be focused from 4.6' (1.4m) ~ 47.3' (14.4m). G Refer to figure below to adjust screen size. ROOM
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 10
    . (Refer to P 21 and 37.) ADJUSTABLE FEET FEET LOCK LATCHES INSTALLING PROJECTOR IN PROPER POSITION Install the projector properly. Improper installation may reduce the lamp lifetime and cause a fire hazard. 10˚ Do not tilt the projector more than 10 degrees above and below. 10˚ NO UPWARD Do not
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 11
    Use Carry Handle when moving a Projector. When moving a projector, replace lens cover and retract feet to prevent damage to lens and cabinet. When this projector is not in use for an extended period, put it into case (dust cover) supplied with this projector. PREPARATION CAUTION IN CARRYING OR
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 12
    /Y Cb/Pb Cr/Pr INPUT 2 VIDEO/Y Cb/Pb Cr/Pr R-AUDIO-L S-VIDEO (MONO) INPUT 3 CONTROL PORT CONNECTOR When controlling computer with Remote Control Unit of this projector, connect mouse port of your personal computer to this connector. (Refer to P13.) ✽ Do not press this button. This button is used
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 13
    ✽ IBM-compatible computer or Macintosh computer (VGA / SVGA / XGA / SXGA) Desktop type Laptop type Monitor Output Monitor Output or or Monitor output before using this terminal. (See page 23.) Terminals of a Projector INPUT 1 ANALOG IN/OUT DIGITAL(DVI-D) R/C JACK AUDIO 1 IN/OUT USB
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 14
    CONNECTING TO VIDEO EQUIPMENT Cables used for connection (✽ = Cable is not supplied with this projector.) • Video Cable (RCA x 1 or RCA x 3) ✽ • BNC Cable ✽ • S-VIDEO Cable ✽ • Audio Cable (RCA x 2) ✽ • Audio Cable {Mini Plug (stereo)} ✽ • Scart Cable ✽ Video Source (example) Video Cassette
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 15
    as shown in table below depending on Code No. that you want to select remote control code. (Refer to P39.) DIP SWITCH SETTING SW4 ........ LASER ON/OFF SW1 .M INPUT 2 INPUT 3 FOCUS LENS NETWORK POWER ON-OFF BUTTON Used to turn projector on or off. (P20) AUTO PC ADJ. BUTTON Use to operate AUTO PC
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 16
    or heat. G Do not drop Remote Control Unit. G If a battery has leaked on Remote Control Unit, carefully wipe case clean and install new batteries. G Danger of explosion if battery is incorrectly replaced. G Dispose of used batteries according to batteries manufacturers instructions and local rules.
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 17
    CONTROLS) and INDICATORS on its top. LAMP REPLACE INDICATOR Turns to yellow when life of projection lamp draws to an end. (P44) WARNING TEMP. INDICATOR Flashes red when internal projector temperature is too high. (P42) READY INDICATOR Lights green when a projector is ready to be turned on. And
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 18
    OPERATING ON-SCREEN MENU HOW TO OPERATE ON-SCREEN MENU You can control and adjust this projector through ON-SCREEN MENU. Refer to following pages to operate each adjustment on ON-SCREEN MENU. REMOTE CONTROL UNIT 1 DISPLAY MENU Press MENU button to display ON-SCREEN MENU. 2 MOVING POINTER Move
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 19
    Press MENU BUTTON while connecting to PC input source. GUIDE WINDOW Shows selected item of ONSCREEN MENU. PC Wide / Digital zoom +/-] (Refer to P29) SETTING MENU Used to change settings of projector or reset Lamp Replace Counter. (Refer to P37-40) INPUT MENU Used to select input source (Input
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 20
    POWER ON-OFF button on Top Control or on Remote Control Unit, and a message "Power off?" appears on a screen. 2 Press POWER ON-OFF button again to turn off projector. LAMP Indicator lights bright and READY Indicator turns off. After projector is turned off, Cooling Fans operate (for 90 seconds
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 21
    of direction being corrected turn(s) red. • Arrow(s) disappear(s) at the maximum correction. • If you press the KEYSTONE button on Top Control or on Remote Control Unit once more while the keystone dialog box is being displayed, the keystone adjustment will be canceled. Reduce the upper width with
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 22
    To restore to normal, press NO SHOW button again or press any other button. Message disappears after 4 seconds. P-TIMER FUNCTION Press P-TIMER button on Remote Control unit. Timer display "00 : 00" appears on screen and timer starts to count time (00 : 00 ~ 59 : 59). To stop P-TIMER display, press
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 23
    by pressing INPUT 1, INPUT 2 or INPUT 3 button on Remote Control Unit. If projector cannot reproduce proper image, select correct input source through MENU The specification of HDCP is decided and controlled by Digital Content Protection, LLC. Should the specification be changed, this projector may
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 24
    XGA or SXGA (refer to "COMPATIBLE COMPUTER SPECIFICATION" on page 49). When a computer is selected, this projector projector is set correctly. (Refer to TROUBLESHOOTING on page 46.) PC SYSTEM MENU PC SYSTEM Menu icon Displays system being selected. Mode 1 User preset adjustment in MANUAL
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 25
    AUTO PC ADJ. button on Top Control or on Remote Control Unit. PC ADJUST MENU PC ADJUST Menu icon PC Adjustment can be memorized in this projector. Once parameters are memorized, setting can be done is not provided properly through this function, manual adjustments are required. (Refer to page 26
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 26
    you to precisely adjust several parameters to match with those special signal formats. This projector has 5 independent memory areas to memorize those parameters manually adjusted. This enables you to recall setting for a specific computer whenever you use it. Note : This PC ADJUST Menu cannot be
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 27
    SELECT button at Display area icon and Display area dialog box appears. Display area Display area V Adjustment of vertical area displayed with this projector. Press POINT LEFT/RIGHT button(s) to decrease/increase value and then press SELECT button. Full screen Press POINT LEFT/RIGHT button(s) to
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 28
    among Standard, Real, Image 1, Image 2, Image 3 and Image 4 by pressing IMAGE button on Top Control or on Remote Control Unit. Standard Normal picture level preset on this projector. Real Picture level with improved halftone for graphics. IMAGE 1~4 User preset picture adjustment in IMAGE ADJUST Menu
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 29
    size. A projected image can be also expanded by pressing D.ZOOM L button on Remote Control Unit. NOTE G True and Digital zoom +/- cannot be operated when "480i 1280 X 1024, reset resolution to lower before connecting projector. G Image data in other than XGA (1024 x 768) is modified to fit screen
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 30
    VIDEO INPUT SELECTING INPUT SOURCE WHEN SELECT INPUT 2 (5 BNC INPUT JACKS ) When connecting to those equipment, select a type of Video INPUT MENU source in SOURCE SELECT Menu. 1 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move a red frame pointer to INPUT
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 31
    to optimize its performance. When Video System is 1035i or 1080i, select system manually first. COMPONENT VIDEO SIGNAL FORMAT If projector cannot reproduce proper video image, it is necessary to select a specific component video signal format among 480i, 575i, 480p, 575p, 720p, 1035i and 1080i
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 32
    among Standard, Cinema, Image 1, Image 2, Image 3 and Image 4 by pressing IMAGE button on Top Control or on Remote Control Unit. Standard Normal picture level preset on this projector. Cinema Picture level adjusted for picture with fine tone. IMAGE 1~4 User preset picture adjustment in IMAGE ADJUST
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 33
    VIDEO INPUT PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display desirable image size. 1 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 34
    display colors on the screen, and to replace these colors with other colors if required. The projector lets you replace up to eight colors for each image MODE COLOR MANAGEMENT POINTER NOTE; Press the COLOR M. button on the remote control to display the COLOR MANAGEMENT menu. If you would like to
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 35
    the pointer mode (even if you press the MENU key on the projector or the remote control). (You will need to reselect and re-adjust the color in DEL MENU COLOR M. NOTE; If you press the COLOR M. button on the remote control, the COLOR MANAGEMENT menu will be exited and the display will return to the
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 36
    mode to OFF. L1 ···· Progressive scan mode to ON (for active picture). L2 ···· Progressive scan mode to ON (for still picture). Store To store manually preset image, move a red frame pointer to Store icon and press SELECT button. Image Level Menu will appear. Move a red frame pointer to Image 1 to
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 37
    Russian, Chinese, Korean and Japanese. SETTING MENU SETTING Menu icon Set a red frame pointer to item and press SELECT button. Lamp mode When selecting the Lamp mode, the projector reduce the brightness and set into the low power consumption mode. Normal mode Auto mode The brightness is adjusted
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 38
    is "On," the screen image is forcibly changed to a 4:3 image, even if the input signal is HDTV. Blue back When this function is "On," this projector will produce a blue image instead of the video noise on the screen when any input source is unplugged or turned off. Display This function decides
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 39
    minutes). On start Time left until Lamp off. When this function is "On," projector is automatically turned on just by connecting remote control operation mixture (jam) when operating several projectors or video equipment together. For example operating projector in "Code 7," both projector and Remote
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 40
    remote control nearby, disconnect the AC cord to turn off the power, and then while pressing a SELECT button, reinsert the AC cord, This will cancel the projector's control panel lock. Lamp counter reset This function is used to reset Lamp Replace Counter. When replacing Projection Lamp, reset Lamp
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 41
    Remote Control Unit as Wireless Mouse for a Personal Computer, installation of the mouse driver (not supplied) is required. Make sure that the mouse driver connect Serial Port of your computer to Control Port of the projector with Control Cable for Serial Port (supplied). OPERATING WIRELESS MOUSE
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 42
    and the projector can be turned on by pressing the On/Off button on the remote control unit or on the top control. When you turn on the projector, the Contact the service station. When both of the Warning Temp. and Ready indicators are flashing: When the projector detects an internal problem, it
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 43
    Replace Air Filter properly. Make sure that Air Filter is fully inserted. CAUTION Do not operate a projector with Air Filter removed. Dust may accumulate on LCD service station for proper cleaning. CLEANING PROJECTION LENS Follow these steps to clean Projection Lens: 1 Apply a non-abrasive camera
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 44
    . LAMP ASSEMBLY LAMP COVER HANDLE ORDER REPLACEMENT LAMP Replacement Lamp can be ordered through your dealer. When ordering a Projection Lamp, give the following information to the dealer. G Model No. of your projector : G Replacement Lamp Type No. : PLC-XP50/PLC-XP50L POA-LMP67 (Service
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 45
    should be replaced, i.e., if the LAMP REPLACE INDICATOR lights up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down. ( Follow carefully the instructions in the LAMP REPLACEMENT section of this manual. ) Continuous use of the lamp with the LAMP REPLACE INDICATOR lighted
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 46
    APPENDIX TROUBLESHOOTING Before calling your dealer or service center for assistance, check matters below once again. 1. Make sure you have connected a projector to your computer or video equipment as described in section "CONNECTING PROJECTOR" on pages 12 ~ 14. 2. Check cable connection. Verify
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 47
    can often correct operating problems yourself. If a projector fails to work properly, see "TROUBLESHOOTING" section on pages 46, 47. To correct failure, try "Solutions". If after following all operating instructions, you find that service is necessary, contact Sanyo Service Station or store where
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 48
    center for service and checkup. Do not leave the projector on. It may cause electric shock or a fire hazard. ✽ The projector is in the Power management mode. • • • on • • • flashing • • • dim • • • off ✽ When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 49
    COMPATIBLE COMPUTER SPECIFICATIONS Basically this projector can accept a signal from all computers with V, H-Frequency mentioned below and less than 180 MHz of Dot Clock. ON-SCREEN DISPLAY RESOLUTION H-Freq. (kHz) V-Freq. ON-SCREEN (Hz) DISPLAY VGA 1 640 x 480 31.47 59.88 XGA 10 VGA
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 50
    APPENDIX Input Input Input 1 Input 2 Input 3 PC source System 1) Mode 1 Mode 2 VGA 1 SVGA 1 XGA 1 Image Standard Real Image 1 Image 2 Image 3 Image 4 50 MENU TREE RGB RGB( Scart) RGB(PC Digital) RGB( AV HDCP ) Monitor out Video Y, Pb/Cb, Pr/
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 51
    Logo Ceiling Rear Power management On start Remote control code USB Key lock Lamp counter reset Factory default Volume Built-in Code 2 Code 3 Code 4 Code 5 Code 6 Code 7 Code 8 Quit Mouse Projector Off Control panel Remote control Yes/No Yes/No Contrast 0 - 63 Brightness 0 - 63 Color 0 - 63
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 52
    ) Owner's Manual AC Power Cord Wireless/Wired Remote Control Transmitter and Batteries Remote Control Cable VGA Cable USB Cable Control Cable for Serial port Protective Dust Cover Lens Cover (PLC-XP50) Lens Attachment (PLC-XP50L) G Specifications are subject to change without notice. G LCD panels
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 53
    CONFIGURATIONS OF TERMINALS COMPUTER INPUT-1 and MONITOR OUT TERMINALS (ANALOG) Terminal : HDB15-PIN Pin Configuration 54 32 1 10 9 8 7 6 15 14 13 12 11 1 Red Input 9 +5V Power 2 Green Input 10 Ground (Vert.sync.) 3 Blue Input 11 Sense 0 4 Sense 2 12 DDC Data 5 Ground (Horiz.sync.) 13
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 54
    as it may cause injury. To the sales and service engineer; Referring to the attached lens replacement and installation manual, replace or install the lens properly. After installing the lens, attach the lens cap to the lens when setting up the projector. Do not hold the lens when carrying or lifting
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 55
    APPENDIX 55
  • Sanyo XP50L | Instruction Manual, PLC-XP50 - Page 56
    Printed in Japan Part No. 610 306 0910 (1AA6P1P3972-- MS3A) SANYO Electric Co., Ltd
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
Owner’s Manual
PLC-XP50
Multimedia Projector
MODEL
PLC-XP50L
(Lensless)