Sanyo XP51L Owners Manual

Sanyo XP51L - PLC XGA LCD Projector Manual

Get Sanyo XP51L - PLC XGA LCD Projector PDF manuals and user guides View all Sanyo XP51L manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo XP51L manual content summary:

  • Sanyo XP51L | Owners Manual - Page 1
    Multimedia Projector MODEL PLC-XP50/XP51 PLC-XP50L/XP51L (Lensless) Owner's Manual
  • Sanyo XP51L | Owners Manual - Page 2
    operate improperly, read this manual again, check operations and cable connections and try the solutions in the "Trouble-shooting" section of the end of this booklet. If the problem still persists, contact the sales dealer where you purchased the projector or the service center. SAFETY PRECAUTIONS
  • Sanyo XP51L | Owners Manual - Page 3
    service personnel under the following conditions: a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the projector. c. If the projector has been exposed to rain or water. d. If the projector does not operate normally by following the operating instructions
  • Sanyo XP51L | Owners Manual - Page 4
    otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Model Number Trade Name Responsible party Address Telephone No. : PLC-XP50/PLC-XP51/PLC-XP50L/PLC-XP51L : Sanyo : SANYO FISHER COMPANY : 21605 Plummer
  • Sanyo XP51L | Owners Manual - Page 5
    CLEANING PROJECTION LENS 43 21 LAMP REPLACEMENT 44 21 LAMP REPLACE COUNTER 45 21 TROUBLESHOOTING 46 21 INDICATORS AND PROJECTOR CONDITION 48 22 22 G Each name of corporations or products in the owner's manual is a trademark or a registered trademark of its respective corporation. 5
  • Sanyo XP51L | Owners Manual - Page 6
    System This projector has Multi-Scan System to conform to almost all computer output signals quickly. There is no need for troublesome manual adjustment of frequency a projector may result in distorted image being displayed in a trapezoid shape. Keystone Correction solves this problem by digitally
  • Sanyo XP51L | Owners Manual - Page 7
    temperature and automatically controls operating power of Cooling Fans. LAMP COVER CARRYING HANDLE BOTTOM OF CABINET When attached the PJ-Net organizer (optional part) to the projector, remove the these parts. Refer to the owner's manual in the optional PJ-Net organizer. AIR INTAKE VENTS
  • Sanyo XP51L | Owners Manual - Page 8
    plug into any other type of power system. Consult your authorized dealer or service station if you are not sure of type of power supply being in use. Connect a projector with a peripheral equipment before turning a projector on. (Refer to pages 12 ~ 14 for connection.) CAUTION For safety, unplug AC
  • Sanyo XP51L | Owners Manual - Page 9
    NOTE: The figures below are only for Model PLC-XP50/PLC-XP51. Projection lens is not provided with Model PLC-XP50L/PLC-XP51L. G This projector is designed to project on a flat projection surface. G Projector can be focused from 4.6' (1.4m) ~ 47.3' (14.4m). G Refer to figure below to adjust
  • Sanyo XP51L | Owners Manual - Page 10
    . (Refer to P 21 and 37.) ADJUSTABLE FEET FEET LOCK LATCHES INSTALLING PROJECTOR IN PROPER POSITION Install the projector properly. Improper installation may reduce the lamp lifetime and cause a fire hazard. 10˚ Do not tilt the projector more than 10 degrees above and below. 10˚ NO UPWARD Do not
  • Sanyo XP51L | Owners Manual - Page 11
    CAUTION IN CARRYING OR TRANSPORTING A PROJECTOR G Do not drop or bump a projector, otherwise damages or malfunctions may result. G When carrying a projector, use a suitable carrying case. G Do not transport a projector by using a courier or transport service in an unsuitable transport case. This
  • Sanyo XP51L | Owners Manual - Page 12
    Cr/Pr INPUT 2 VIDEO/Y Cb/Pb Cr/Pr R-AUDIO-L S-VIDEO (MONO) INPUT 3 CONTROL PORT CONNECTOR When controlling computer with Remote Control Unit of this projector, connect mouse port of your personal computer to this connector. (Refer to P13.) ✽ Do not press this button. This button is used for our
  • Sanyo XP51L | Owners Manual - Page 13
    is switchable. Set the terminal up as either Computer input or Monitor output before using this terminal. (See page 23.) Terminals of a Projector INPUT 1 ANALOG IN/OUT DIGITAL(DVI-D) R/C JACK AUDIO 1 IN/OUT USB RESET CONTROL PORT AUDIO 2 G B R H/V V VIDEO/Y Cb/Pb Cr/Pr INPUT 2 VIDEO
  • Sanyo XP51L | Owners Manual - Page 14
    CONNECTING TO VIDEO EQUIPMENT Cables used for connection (✽ = Cable is not supplied with this projector.) • Video Cable (RCA x 1 or RCA x 3) ✽ • BNC Cable ✽ • S-VIDEO Cable ✽ • Audio Cable (RCA x 2) ✽ • Audio Cable {Mini Plug (stereo)} ✽ • Scart Cable ✽ Video Source (example) Video Cassette
  • Sanyo XP51L | Owners Manual - Page 15
    MUTE IMAGE VOLUME- SELECT VOLUME+ MENU KEYSTONE LASER P-TIMER INPUT 1 ZOOM COLOR.M INPUT 2 INPUT 3 FOCUS LENS NETWORK POWER ON-OFF BUTTON Used to turn projector on or off. (P20) AUTO PC ADJ. BUTTON Use to operate AUTO PC Adjustment function. (P25) IMAGE BUTTON Used to select image level. (P28
  • Sanyo XP51L | Owners Manual - Page 16
    Used to select input source (INPUT 1). (P23) Operating Range Point Remote Control Unit toward projector (Receiver Window) whenever pressing any button. Maximum operating range for Remote Control Unit is about of used batteries according to batteries manufacturers instructions and local rules.
  • Sanyo XP51L | Owners Manual - Page 17
    is ready to be turned on. And it flashes green in Power Management mode. (P39) LAMP INDICATOR Becomes dim when a projector is turned on. And bright when a projector is in stand-by mode. MENU BUTTON Used to open or close MENU operation. (P18, 19) ZOOM BUTTON Used to adjust zoom. (P21) POWER
  • Sanyo XP51L | Owners Manual - Page 18
    BEFORE OPERATION OPERATING ON-SCREEN MENU HOW TO OPERATE ON-SCREEN MENU You can control and adjust this projector through ON-SCREEN MENU. Refer to following pages to operate each adjustment on ON-SCREEN MENU. REMOTE CONTROL UNIT 1 DISPLAY MENU Press MENU button to
  • Sanyo XP51L | Owners Manual - Page 19
    Press MENU BUTTON while connecting to PC input source. GUIDE WINDOW Shows selected item of ONSCREEN MENU. PC Wide / Digital zoom +/-] (Refer to P29) SETTING MENU Used to change settings of projector or reset Lamp Replace Counter. (Refer to P37-40) INPUT MENU Used to select input source (Input
  • Sanyo XP51L | Owners Manual - Page 20
    or on Remote Control Unit, and a message "Power off?" appears on a screen. 2 Press POWER ON-OFF button again to turn off projector. LAMP Indicator lights bright and READY Indicator turns off. After projector is turned off, Cooling Fans operate (for 90 seconds). During this "Cooling Down" period
  • Sanyo XP51L | Owners Manual - Page 21
    BASIC OPERATION ADJUSTING SCREEN ZOOM ADJUSTMENT 1 Press ZOOM button on Top Control or ZOOM L/M button on Remote Control Unit. Message "Zoom" is displayed. 2 Press ZOOM L button or POINT UP button to make image larger, and press ZOOM M button or POINT DOWN button to make image smaller. Message
  • Sanyo XP51L | Owners Manual - Page 22
    BASIC OPERATION PICTURE FREEZE FUNCTION Press FREEZE button on Remote Control Unit to freeze picture on-screen. To cancel FREEZE function, press FREEZE button again or press any other button. NO SHOW FUNCTION Press NO SHOW button on Remote Control Unit to black out image. To restore to normal, press
  • Sanyo XP51L | Owners Manual - Page 23
    by pressing INPUT button on Top Control. Select INPUT source by pressing INPUT 1, INPUT 2 or INPUT 3 button on Remote Control Unit. If projector cannot reproduce proper image, select correct input source through MENU OPERATION (see below). NOTE G Input 1 terminal is switchable and can be used as
  • Sanyo XP51L | Owners Manual - Page 24
    signal input from computer. Make sure connection of computer and a projector is set correctly. (Refer to TROUBLESHOOTING on page 46.) PC SYSTEM MENU PC SYSTEM Menu icon Displays system being selected. Mode 1 User preset adjustment in MANUAL PC ADJUSTMENT. Adjustment data can be stored in the Mode
  • Sanyo XP51L | Owners Manual - Page 25
    Adjustment parameters from Auto PC Adjustment can be memorized in this projector. Once parameters are memorized, setting can be done just by selecting Mode in Adjustment function. When image is not provided properly through this function, manual adjustments are required. (Refer to page 26, 27.) G Auto PC
  • Sanyo XP51L | Owners Manual - Page 26
    cannot reproduce a proper image and image may be recognized as a flickering picture, a non-synchronized picture, a non-centered picture or a skewed picture. This projector has a Manual PC Adjustment to enable you to precisely adjust several parameters to match with those special signal formats. This
  • Sanyo XP51L | Owners Manual - Page 27
    SELECT button at Display area icon and Display area dialog box appears. Display area Display area V Adjustment of vertical area displayed with this projector. Press POINT LEFT/RIGHT button(s) to decrease/increase value and then press SELECT button. Full screen Press POINT LEFT/RIGHT button(s) to
  • Sanyo XP51L | Owners Manual - Page 28
    to level that you want to set and then press SELECT button. Standard Normal picture level preset on this projector. Real Picture level with improved halftone for graphics. IMAGE 1~4 User preset picture adjustment in IMAGE ADJUST Menu (P36). IMAGE SELECT MENU IMAGE SELECT Menu icon Move a red frame
  • Sanyo XP51L | Owners Manual - Page 29
    press SELECT button. True Provides image in its original size. When original image size is larger than screen size (1024 x 768), this projector enters "Digital zoom +" mode automatically. Wide Provides image to fit wide video aspect ratio (16 : 9) by expanding image width uniformly. This function
  • Sanyo XP51L | Owners Manual - Page 30
    VIDEO INPUT SELECTING INPUT SOURCE WHEN SELECT INPUT 2 (5 BNC INPUT JACKS ) When connecting to those equipment, select a type of Video INPUT MENU source in SOURCE SELECT Menu. 1 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move a red frame pointer to INPUT
  • Sanyo XP51L | Owners Manual - Page 31
    Video signal, and adjusts itself to optimize its performance. When Video System is 1035i or 1080i, select system manually first. COMPONENT VIDEO SIGNAL FORMAT If projector cannot reproduce proper video image, it is necessary to select a specific component video signal format among 480i, 575i
  • Sanyo XP51L | Owners Manual - Page 32
    IMAGE button on Top Control or on Remote Control Unit. Standard Normal picture level preset on this projector. Cinema Picture level adjusted for picture with fine tone. IMAGE 1~4 User preset picture adjustment in IMAGE ADJUST Menu (P36). IMAGE button Standard Cinema Image 1 Image 2 Image 3 Image
  • Sanyo XP51L | Owners Manual - Page 33
    VIDEO INPUT PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display desirable image size. 1 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/
  • Sanyo XP51L | Owners Manual - Page 34
    adjust the level, phase and gamma of the selected display colors on the screen, and to replace these colors with other colors if required. The projector lets you replace up to eight colors for each image. There are four preset images for VIDEO mode and four preset images for PC, giving
  • Sanyo XP51L | Owners Manual - Page 35
    palette. Gamma adjustment palette. COLOR SELECTION MODE CANCEL The mode will return to the pointer mode (even if you press the MENU key on the projector or the remote control). (You will need to reselect and re-adjust the color in this case.) QUIT The COLOR MANAGEMENT menu will be exited
  • Sanyo XP51L | Owners Manual - Page 36
    mode to OFF. L1 ···· Progressive scan mode to ON (for active picture). L2 ···· Progressive scan mode to ON (for still picture). Store To store manually preset image, move a red frame pointer to Store icon and press SELECT button. Image Level Menu will appear. Move a red frame pointer to Image 1 to
  • Sanyo XP51L | Owners Manual - Page 37
    Russian, Chinese, Korean and Japanese. SETTING MENU SETTING Menu icon Set a red frame pointer to item and press SELECT button. Lamp mode When selecting the Lamp mode, the projector reduce the brightness and set into the low power consumption mode. Normal mode Auto mode The brightness is adjusted
  • Sanyo XP51L | Owners Manual - Page 38
    is "On," the screen image is forcibly changed to a 4:3 image, even if the input signal is HDTV. Blue back When this function is "On," this projector will produce a blue image instead of the video noise on the screen when any input source is unplugged or turned off. Display This function decides
  • Sanyo XP51L | Owners Manual - Page 39
    to the time setting, and then use the POINT LEFT/RIGHT button(s) to set the time (1 minute to 30 minutes). On start Time left until Lamp off. When this function is "On," projector is automatically turned on just by connecting AC Power cord to a wall outlet. Note ; Be sure to turn
  • Sanyo XP51L | Owners Manual - Page 40
    then while pressing a SELECT button, reinsert the AC cord, This will cancel the projector's control panel lock. Lamp counter reset This function is used to reset Lamp Replace Counter. When replacing Projection Lamp, reset Lamp Replace Counter by using this function. Refer to page 45 for operation
  • Sanyo XP51L | Owners Manual - Page 41
    may not work properly. Note : When your computer has no mouse port, connect Serial Port of your computer to Control Port of the projector with Control Cable for Serial Port (supplied). OPERATING WIRELESS MOUSE When controlling a PC mouse pointer, operate Wireless Mouse with POINT button, Drag ON
  • Sanyo XP51L | Owners Manual - Page 42
    performing above checks, Cooling Fans or Internal Circuits may be malfunctioning. Contact the service station. When both of the Warning Temp. and Ready indicators are flashing: When the projector detects an internal problem, it will shut down automatically and both of the Warning temp. and Ready
  • Sanyo XP51L | Owners Manual - Page 43
    may accumulate on a lens, liquid crystal panels, or optical elements inside a projector. This condition may degrade quality of a projected image. When above symptoms are noticed, contact your authorized dealer or service station for proper cleaning. CLEANING PROJECTION LENS Follow these steps to
  • Sanyo XP51L | Owners Manual - Page 44
    give the following information to the dealer. G Model No. of your projector : G Replacement Lamp Type No. : G Replacement Lamp Type No. : PLC-XP50/XP50L/XP51/XP51L POA-LMP67 (for PLC-XP50/XP50L) (Service Parts No. 610 306 5977) POA-LMP81 (for PLC-XP51/XP51L) (Service Parts No. 610 314 9127) 44
  • Sanyo XP51L | Owners Manual - Page 45
    a new one IMMEDIATELY after the projector has cooled down. ( Follow carefully the instructions in the LAMP REPLACEMENT section of this manual. ) Continuous use of the lamp with the LAMP REPLACE INDICATOR lighted may increase the risk of lamp explosion. G A Lamp may explode as a result of vibration
  • Sanyo XP51L | Owners Manual - Page 46
    APPENDIX TROUBLESHOOTING Before calling your dealer or service center for assistance, check matters below once again. 1. Make sure you have connected a projector to your computer or video equipment as described in section "CONNECTING PROJECTOR" on pages 12 ~ 14. 2. Check cable connection. Verify
  • Sanyo XP51L | Owners Manual - Page 47
    can often correct operating problems yourself. If a projector fails to work properly, see "TROUBLESHOOTING" section on pages 46, 47. To correct failure, try "Solutions". If after following all operating instructions, you find that service is necessary, contact Sanyo Service Station or store where
  • Sanyo XP51L | Owners Manual - Page 48
    center for service and checkup. Do not leave the projector on. It may cause electric shock or a fire hazard. ✽ The projector is in the Power management mode. • • • on • • • flashing • • • dim • • • off ✽ When the life of the projection lamp draws to an end, the LAMP REPLACE indicator
  • Sanyo XP51L | Owners Manual - Page 49
    APPENDIX COMPATIBLE COMPUTER SPECIFICATIONS Basically this projector can accept a signal from all computers with V, H-Frequency mentioned below and less than 180 MHz of Dot Clock. ON-SCREEN DISPLAY RESOLUTION H-Freq. (kHz) V-Freq.
  • Sanyo XP51L | Owners Manual - Page 50
    APPENDIX Input Input Input 1 Input 2 Input 3 PC source System 1) Mode 1 Mode 2 VGA 1 SVGA 1 XGA 1 Image Standard Real Image 1 Image 2 Image 3 Image 4 50 MENU TREE RGB RGB( Scart) RGB(PC Digital) RGB( AV HDCP ) Monitor out Video Y, Pb/Cb, Pr/Cr RGB Video Y, Pb/Cb, Pr/Cr S-Video SYSTEM 1)
  • Sanyo XP51L | Owners Manual - Page 51
    Power management On start Remote control code USB Key lock Lamp counter reset Factory default Volume Built-in SP. Mute Quit Code 1 Code 2 Code 3 Code 4 Code 5 Code 6 Code 7 Code 8 Quit Mouse Projector Off Control panel Remote control Yes/No Yes/No Contrast 0 - 63 Brightness 0 - 63 Color
  • Sanyo XP51L | Owners Manual - Page 52
    / Wave length : 650±20nm) Owner's Manual AC Power Cord Wireless/Wired Remote Control Transmitter and Batteries Remote Control Cable VGA Cable USB Cable Control Cable for Serial port Protective Dust Cover Lens Cover (PLC-XP50/XP51) Lens Attachment (PLC-XP50L/XP51L) G Specifications are subject to
  • Sanyo XP51L | Owners Manual - Page 53
    CONFIGURATIONS OF TERMINALS COMPUTER INPUT-1 and MONITOR OUT TERMINALS (ANALOG) Terminal : HDB15-PIN Pin Configuration 54 32 1 10 9 8 7 6 15 14 13 12 11 1 Red Input 9 +5V Power 2 Green Input 10 Ground (Vert.sync.) 3 Blue Input 11 Sense 0 4 Sense 2 12 DDC Data 5 Ground (Horiz.sync.) 13
  • Sanyo XP51L | Owners Manual - Page 54
    as it may cause injury. To the sales and service engineer; Referring to the attached lens replacement and installation manual, replace or install the lens properly. After installing the lens, attach the lens cap to the lens when setting up the projector. Do not hold the lens when carrying or lifting
  • Sanyo XP51L | Owners Manual - Page 55
    APPENDIX 55
  • Sanyo XP51L | Owners Manual - Page 56
    Printed in Japan Part No. 610 315 6910 (1AA6P1P3972A- MH5A) SANYO Electric Co., Ltd
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
Owner’s Manual
PLC-XP50/XP51
Multimedia Projector
MODEL
PLC-XP50L/XP51L
(Lensless)