Sanyo XP57L Instruction Manual, PLC-XP57L
Sanyo XP57L - PLC XGA LCD Projector Manual
 |
UPC - 086483061066
View all Sanyo XP57L manuals
Add to My Manuals
Save this manual to your list of manuals |
Sanyo XP57L manual content summary:
- Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 1
Multimedia Projector MODEL PLC-XP57L Owner's Manual ✽ Projection lens is optional. - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 2
EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE OWNER'S MANUAL WITH - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 3
Follow all warnings and instructions marked on the projector. For added protection to the projector during a lightning storm, projector exhibits a distinct change in performance-this indicates a need for service. When replacement parts are required, be sure the service technician has used replacement - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 4
instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Model Number Trade Name Responsible party Address Telephone No. : PLC-XP57L : Sanyo : SANYO the plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 5
LENS 47 21 LAMP REPLACEMENT 48 22 LAMP REPLACE COUNTER 49 22 TROUBLESHOOTING 50 22 22 MENU TREE 52 22 COMPATIBLE COMPUTER SPECIFICATIONS 54 23 INDICATORS AND PROJECTOR CONDITION 55 23 TECHNICAL SPECIFICATIONS in the owner's manual is a trademark or a registered - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 6
for a troublesome manual adjustment of problem by digitally altering the projection to produce undistorted images. ◆ Power Management Power management function is provided to reduce power consumption when the projector is not in use. The Power management function operates to turn the projection lamp - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 7
temperature and automatically controls operating power of the cooling fans. BOTTOM OF CABINET LAMP COVER When attaching the PJ-Net Organizer (optional) to the projector, remove the these parts. Refer to the owner's manual of the optional PJ-Net organizer. CARRYING HANDLE AIR INTAKE VENTS This - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 8
any other type of power system. If you are not sure of the type of power being supplied, consult your authorized dealer or service station. Connect the projector with all peripheral equipment before turning it on. (See pages 12-14 for connection.) CAUTION For safety, unplug the AC power cord when - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 9
the area where the projector is used and prepare a suitable lens. For the specifications of a projection lens, contact sales dealer where you purchased the projector. 2. For installation, refer to the installation manual of the optional lens. NOTE: • When installing the lens, remove the cover cap - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 10
. (See pages 22 and 38.) ADJUSTABLE FEET FEET LOCK LATCHES INSTALLING PROJECTOR IN PROPER POSITION Install the projector properly. Improper installation may reduce the lamp life and cause a fire hazard. 10˚ Do not tilt the projector more than 10 degrees from side to side. 10˚ NO SIDEWAYS Do - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 11
when moving the projector. Replace the lens cap and retract the ADJUSTABLE FEET when moving the projector to prevent damages to the lens and cabinet. When this projector is not in use for an extended period, put it into a suitable case (not supplied with this projector). PREPARATION CAUTION IN - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 12
. (See page 13.) USB CONNECTOR (Series B) When controlling a computer with the remote control of this projector, connect USB terminal of your personal computer to this terminal. (See page 13.) RESET BUTTON This projector uses a micro processor to control the unit, and only occasionally, this micro - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 13
24.) INPUT 1 ANALOG IN/OUT DIGITAL(DVI-D) R/C JACK AUDIO 1 IN/OUT USB RESET CONTROL PORT AUDIO 2 G B R H/V V VIDEO/Y Cb/Pb Cr/Pr INPUT 2 Projector NOTE: Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables. Turn a projector - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 14
CONNECTING TO VIDEO EQUIPMENT Cables used for connection (✽ = Cables not supplied with this projector.) • Video Cable (RCA x 1 or RCA x 3) ✽ • BNC Cable ✽ • S-VIDEO Cable ✽ • Audio Cable (RCA x 2) ✽ • Audio Cable {Mini Plug (stereo)} ✽ • Scart Cable ✽ Video Source (Example) Video Cassette - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 15
Used to adjust focus. (p.22) POWER ON-OFF BUTTON Used to turn the projector on or off. (p.20, 21) AUTO PC ADJ. BUTTON Use to operate the (p.45) LENS SHIFT BUTTON Used to select the Lens Shift function. (p.22) WIRED REMOTE JACK When using as a Wired Remote Control, connect a remote control cable - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 16
heat. ● Do not drop the remote control. ● If a battery has leaked on the remote control, carefully wipe the case clean and install new batteries. ● Danger of explosion if battery is incorrectly replaced. ● Dispose of used batteries according to batteries manufacturers instructions and local rules. - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 17
BEFORE OPERATION TOP CONTROLS AND INDICATORS This projector has CONTROL BUTTONS (TOP CONTROLS) and INDICATORS on its top. LAMP REPLACE INDICATOR Turns to yellow when the projection lamp reaches its end of life. Blinks yellow when the lamp cannot light up. (p.48, 55-56) WARNING TEMP. INDICATOR - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 18
BEFORE OPERATION ON-SCREEN MENU HOW TO OPERATE ON-SCREEN MENU You can control and adjust this projector with On-Screen Menu. Refer to the relevant pages to operate each adjustment. REMOTE CONTROL 1. DISPLAY MENU Press the MENU button to display the On-Screen Menu. 2. MOVING POINTER Move the - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 19
the MENU button when connecting to the PC input source. GUIDE WINDOW Shows the selected item of On-Screen Menu. PC zoom +/-] (See page 30.) SETTING MENU Used to change settings of the projector or reset the Lamp replacement counter. (See pages 38-44.) INPUT MENU Used to select an input source - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 20
input source that was selected the last time and the Lamp control status icon (see page 41) appear on the screen. If the projector is locked with a PIN code, a PIN code Input Dialog Box appears. Enter a PIN code as instructed below. 16 The preparation display disappears after 30 seconds. Selected - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 21
ON-OFF button on the top control or on the remote control, and "Power off?" appears on the screen. 2 Press the POWER ON-OFF button again to turn off the projector. The LAMP indicator lights bright and the READY indicator turns off. After the projector is turned off, the cooling fans operate (for 90 - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 22
not function properly if the image is corrected by the Keystone function. "Focus" disappears after 4 seconds. LENS SHIFT ADJUSTMENT 1 Press the LENS SHIFT button on the top control or LENS SHIFT ▲/▼ buttons on the remote control. "Lens shift" appears on the screen. 2 Press the POINT UP button or - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 23
few seconds. Press the VOLUME (+) button to increase the volume; press the VOLUME (-) button to decrease the volume. Mute Press the MUTE button on the remote control to turn off the sound. To restore the sound to its previous level, press the MUTE button again or press the Volume (+/-) buttons. MENU - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 24
or the INPUT 1, INPUT 2, or INPUT 3 buttons on the remote control. If the projector cannot reproduce proper image, select a correct input source with the MENU specification of HDCP is decided and controlled by Digital Content Protection, LLC. Should the specification be changed, this projector - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 25
2 button on the remote control is pressed. SPECIFICATIONS" on pages 54-55). When Computer is selected, this projector projector is set correctly. (See "TROUBLESHOOTING" on page 50.) PC SYSTEM MENU PC SYSTEM Menu icon Displays system being selected. Mode 1 The User preset adjustment in MANUAL - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 26
or on the remote control. To store the adjusted parameters. The system parameters from Auto PC Adjustment can be memorized in this projector. Once the parameters function. When the image is not provided properly with this function, manual adjustments are required. (See pages 27 and 28.) • Auto PC - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 27
to precisely adjust several parameters to match with those special signal formats. This projector has 10 independent memory areas to store those parameters manually adjusted, which allows you to recall setting for a specific computer whenever you use it. Note: The PC ADJUST Menu cannot be operated - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 28
COMPUTER INPUT Reset To reset the adjusted parameters, select Reset and press the SELECT button. A confirmation box appears. Select [Yes]. All the adjustments return to their previous figures. To store adjustment data. This Mode has - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 29
among Standard, Real, and Image 1 to Image 10 by pressing the IMAGE button on the top control or on the remote control. Standard Normal picture level preset on this projector. Real Picture level with improved halftone for graphics. IMAGE 1~10 User preset picture adjustment in the IMAGE ADJUST Menu - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 30
The projected image can be also expanded by pressing the D.ZOOM ▲ button on the remote control. NOTE: • True, Full, and Digital zoom +/- cannot be operated when "480i is higher than 1600 x 1200, lower the resolution before connecting the projector. • The image data other than XGA (1024 x 768) is - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 31
an INPUT source by pressing the INPUT button on the top control or the INPUT 1, INPUT 2, or INPUT 3 buttons on the remote control. If the projector cannot reproduce proper image, select a correct input source with the MENU OPERATION (see below). MENU OPERATION INPUT button Input 1 Input 2 Input - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 32
itself to optimize its performance. When the Video System is 1035i or 1080i, select the system manually. COMPONENT VIDEO SIGNAL FORMAT If the projector cannot reproduce proper video image, select a specific component video signal format from among 480i, 575i, 480p, 575p, 720p, 1035i, and 1080i. AV - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 33
among Standard, Cinema, Image 1 to Image 10 by pressing the IMAGE button on the top control or on the remote control. Standard Normal picture level preset on this projector. Cinema Picture level adjusted for picture with fine tone. IMAGE 1~10 User preset picture adjustment in the IMAGE ADJUST Menu - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 34
VIDEO INPUT PICTURE SCREEN ADJUSTMENT PICTURE SCREEN SELECT This projector has a picture screen resize function, which enables you to customize the image size. 1 Press the MENU button to display the On-Screen Menu. Press the - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 35
display colors (except for black, white, and gray) on the screen and replace these colors with other colors if required. You can store up to eight (8) MODE COLOR MANAGEMENT POINTER NOTE: Press the COLOR M. button on the remote control to display the COLOR MANAGEMENT POINTER. If you would like to - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 36
Gamma adjustment palette. LIST COLOR M. MENU LIST MODE COLOR PALETTE DEL ALL DEL MENU COLOR M. NOTE: If you press the COLOR M. button on the remote control, the display returns to the normal projection screen, but any settings that have been changed will not be stored. To store the changed - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 37
. . Select for watching a film. With this function, the projector reproduces pictures faithful to the original film quality. NOTE: • The Film Reset and press the SELECT button. A confirmation box appears. Select [Yes]. All the adjustments return to their previous figures. Store To store the manually - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 38
. . stores the keystone correction even if the AC power cord is unplugged. Reset . . resets the keystone correction when the AC power cord is unplugged. Background Three background settings are available in this projector. Select one of the following options when no input source is connected to the - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 39
image that has been adjusted by the Keystone function, the adjusted data is automatically reset and the projector captures an image without keystone correction. • When starting to capture a new image the PIN code setting, refer to the relevant instructions of the PIN code lock function on page 43. 39 - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 40
consumption as well as maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not used for a lamp is turned on if the input signal is reconnected or any button on the top control or remote control is pressed. Shutdown . . When the lamp - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 41
to the input signal. . . . . normal brightness. . . . . lower brightness reduces the lamp power consumption and extends the lamp life. Remote control The eight different remote control codes (Code 1-8) are assigned to this projector: the factory-set, initial code (Code 1) and the other seven codes - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 42
below. Wireless Mouse mode Select " " when controlling a computer with the remote control of this projector. Projector mode: " " Not used. Security Key lock This function locks operation of the top control and remote control. It helps to prevent operation by an unauthorized person. . . . . unlocked - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 43
PIN CODE NO. MEMO ON PAGE 60, AND KEEP IT SECURELY. SHOULD THE PIN CODE BE LOST OR FORGOTTEN, THE PROJECTOR CAN NO LONGER BE OPERATED. PIN code lock When the projector is locked with the PIN code, the PIN code lock mark appears on the menu bar. Entering a PIN code Pointer - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 44
counter This function is used to reset the Lamp replacement counter. When replacing the projection lamp, reset the Lamp replacement counter with this function. See page 49 for operation. Factory default This function returns all setting values except for the User logo, Key lock, PIN - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 45
APPENDIX WIRELESS MOUSE Remote control is not only able to operate this projector but also functions as a mouse port, connect the Serial port of your computer to the Control port of the projector with the Control cable for Serial port (supplied). OPERATING WIRELESS MOUSE When controlling the - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 46
POWER ON/OFF button on the top control or the remote control. When you turn on the projector, the Warning Temp. indicator goes out. TOP CONTROL Warning Contact the service station. When both of the Warning Temp. and Ready indicators are blinking: When the projector detects an internal problem, it - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 47
the projected image. When the symptoms above are noticed, contact your authorized dealer or service station for proper cleaning. CLEANING PROJECTION LENS Follow these steps to clean the projection lens: 1 Turn off the projector and unplug the AC power cord from an AC outlet. 2 Apply a non-abrasive - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 48
not replaced. LAMP ASSEMBLY LAMP COVER HANDLE ORDER REPLACEMENT LAMP Replacement lamp can be ordered through your dealer. When ordering a projection lamp, give the following information to the dealer. ● Model No. of your projector : ● Replacement Lamp Type No. : PLC-XP57L POA-LMP101 (Service - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 49
the lamp should be replaced, i.e., if the LAMP REPLACE indicator lights up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down. (Follow carefully the instructions in the LAMP REPLACEMENT section of this manual.) Continuous use of the lamp with the LAMP REPLACE indicator - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 50
APPENDIX TROUBLESHOOTING Before calling your dealer or service center for assistance, check the items below once again. 1. Make sure you have connected the projector to your computer or video equipment as described in "CONNECTING PROJECTOR" on pages 12-14. 2. Check the cable connection. Make sure - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 51
usually correct operating problems by yourself. If the projector fails to work properly, see "TROUBLESHOOTING" on pages 50 and 51 and try "Solutions" to correct failures. If you find that service is necessary after following all operating instructions, contact the Sanyo Service Station or a store - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 52
Standard Real Image 1 Image 10 PC Adjust Auto PC adj. Fine sync. Total dots Position H Position V Current mode Clamp Display area - H Display area - V Reset Mode free Store Quit 0 - 31 Yes/No Mode 1 Mode 2 Mode 3 Mode 4 Mode 5 Mode 6 Mode 7 Mode 8 Mode 9 Mode 10 Quit Screen Normal True Wide - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 53
Color temp. Red Green Blue Sharpness Gamma Noise reduction Progressive Reset Store Quit 0 - 63 0 - 63 0 - 63 Lamp control Auto/Normal/Eco Remote Control Code 1 USB Security Lamp counter Factory default Quit Code 8 Quit Mouse Projector Key lock PIN code lock Yes/No Yes/No Off Projector Remote - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 54
APPENDIX COMPATIBLE COMPUTER SPECIFICATIONS Basically this projector can accept a signal from all computers with V-, H-Frequency mentioned below, and less than 140 MHz of Dot Clock. ON-SCREEN DISPLAY VGA 1 VGA 2 VGA 3 VGA 4 - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 55
not be properly viewed. NOTE: Specifications are subject to change without notice. INDICATORS AND PROJECTOR CONDITION Check the indicators for projector condition. Indicators LAMP WARNING REPLACE TEMP. yellow red READY green LAMP red Projector Condition The projector is OFF. (The AC power - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 56
is completed.) The lamp cannot light up. (The lamp has been cooled down enough and the projector is in stand-by mode and ready to be turned on with the POWER ON-OFF button.) The projection lamp reaches its end of life. Replace the lamp and then reset the Lamp replacement counter. The indicator - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 57
Owner's Manual (CD-ROM) Quick Reference Guide AC Power Cord Wireless/Wired Remote Control Transmitter and Batteries VGA Cable USB Cable Control Cable for Serial Port Lens Attachment Lens Replacement And Installation Manual PIN Code Label ● Specifications are subject to change without notice. ● LCD - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 58
APPENDIX CONFIGURATIONS OF TERMINALS COMPUTER INPUT-1 TERMINALS (ANALOG) Terminal: HDB15-PIN Pin Configuration 54 32 1 10 9 8 7 6 15 14 13 12 11 1 Red Input 9 +5V Power 2 Green Input 10 Ground (Vert. sync.) 3 Blue Input 11 Sense 0 4 Sense 2 12 DDC Data 5 Ground (Horiz.sync.) 13 Horiz. - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 59
the lens, attach the lens cap to the lens when setting up the projector. Do not hold the lens when carrying or lifting the projector. It may cause serious damage to the projector. To the sales and service engineers: Referring to the attached lens replacement and installation manual, replace or - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 60
CODE NUMBER MEMO Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to use the projector, contact the service station. PIN Code Lock No. Logo PIN Code Lock No. Factory default set No: 1 2 3 4* Factory default set - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 61
Unit : inch (mm) 2.39 (60.6) 10.5° 3.60 (91.5) DIMENSIONS 12.6 (319.0) 5.59 (142.0) 6.61 (168.0) APPENDIX 16.8 (429.5) 5.57 (141.5) 4.55 (115.5) 4.61 (117.0) 5.28 (134.0) 9.06 (230.0) Screw Holes for Ceiling Mount Screw: M6 Depth: 0.393 (10.0) 3.74 (95.0) 5.79 (147.0) 4.49 (114.0) 61 - Sanyo XP57L | Instruction Manual, PLC-XP57L - Page 62
1AA6P1P5225-- KE6A SANYO Electric Co., Ltd.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
 |
 |
Multimedia Projector
MODEL
PLC-XP57L
Owner’s Manual
✽
Projection lens is optional.