Sanyo XT25 Instruction Manual, PLC-XT25
Sanyo XT25 - PLC XGA LCD Projector Manual
 |
UPC - 086483065170
View all Sanyo XT25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sanyo XT25 manual content summary:
- Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 1
Multimedia Projector MODEL PLC-XT25/PLC-XT20 PLC-XT25L*/PLC-XT20L* (*Models without lens.) Owner's Manual - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 2
the top control or remote control (p.59). PIN code lock functions prevents unauthorized use of the projector (pp.59-61). ◆ Multiple Interface Terminals The projector has several interface terminals that can support various types of equipment and signals (pp.11-12). ◆ Lamp Control Brightness of the - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 3
the Filter Counter 64 Lamp Replacement 65 Resetting the Lamp Counter 66 Warning Indicator 67 Cleaning the Projection Lens 68 Cleaning the Projector Cabinet 68 Appendix 69 Troubleshooting 69 Menu Tree 71 Indicators and Projector Condition 73 Compatible Computer Specifications 75 - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 4
the problem still persists, contact the dealer where you purchased the projector or the service center. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 5
Follow all warnings and instructions marked on the projector. For added protection to the projector during a projector exhibits a distinct change in performance-this indicates a need for service. When replacement parts are required, be sure the service technician has used replacement parts - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 6
and on or in the filter. If the projector detects that the filter is clogged, a "Filter warning" icon (red) will appear on the screen and "WARNING FILTER" indicator on the top panel will blink (see below). Stop using the projector immediately and clean or replace the filter. Blocking the air vents - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 7
Instructions Installing the Projector in Proper Directions Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe accident or fire hazard. This projector setting up the projector with upward/downward inclination of over 20 degrees to - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 8
Instructions Moving the Projector Use the hand grip when moving the projector. Replace the lens cap and retract the adjustable feet to prevent damage to the lens and cabinet when carrying. When the projector is not in use for an extended period, put it into a suitable case to protect the projector - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 9
unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Model Number(s) Trade Name Responsible party Address : PLC-XT25, PLC-XT20, PLC-XT25L, PLC-XT20L : Sanyo : SANYO FISHER COMPANY : 21605 Plummer - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 10
Part Names and Functions Front qw rt e yu i o Back !1 !2 !0 ✽ !3 !4 !5 !6 Bottom !7 o q Filter w Speaker e Lens Release Button r Top Controls and Indicators t Maintenance Cover WARNING: FOR MAINTENANCE USE ONLY. DO NOT OPEN. y Lens Cap CAUTION Do not turn on the projector with the lens - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 11
Rear Terminal q w Part Names and Functions e r t o iu y q 5 BNC INPUT JACKS Connect the ). t USB CONNECTOR (Series B) Use this connector when controlling a computer with the remote control of the projector. Connect the USB terminal of your computer to this connector with the supplied USB cable - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 12
to external video equipment (pp.22, 24). !3 CONTROL PORT CONNECTOR When controlling the projector from a computer, connect the computer to this connector with a control cable. !4 INFRARED REMOTE RECEIVER (Back) The infrared remote receiver is also located in the front (pp.10, 18). 12 ✽ RESET - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 13
Top Control q w e r t y Part Names and Functions i o !0 !1 !2 u q WARNING TEMP. indicator Blinks red when the internal temperature of the projector exceeds the operating range (pp.67, 73). w LAMP REPLACE indicator Lights yellow when the projection lamp reaches its end of life (pp.65, 74). e ON/ - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 14
Part Names and Functions Remote Control r ew q t y !2 u !1 i o !0 q STAND-BY button Turn the projector off (p.26). w WIRED REMOTE jack Connect the remote control cable (not supplied) to this jack when using as a wired remote control. e SIGNAL EMISSION indicator Lights red while the laser - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 15
Remote Control Part Names and Functions @6 !3 @5 !4 @4 !5 @3 !6 @2 !7 @1 !8 @0 !9 @7 For PIN code and remote control code. !3 MENU 32). @2 KEYSTONE button Correct keystone distortion (p.32). @3 LENS SHIFT button Select the Lens Shift function (p.31). @4 SCREEN button Select the screen - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 16
. Signal Emission Indicator Laser Light Window Pointer Function You can move the Spotlight or Pointer of the projector with the remote control to emphasize a part of the projected image. 1 Press and hold the MENU and NO SHOW buttons for more than 10 seconds to activate the Pointer function - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 17
Part Names and Functions Wireless Mouse Operation The remote control can be used as a wireless mouse for your computer. Before operating the wireless mouse, connect your computer and the projector with the supplied USB cable. (See page 22 for connection.) When the Pointer function is used, the - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 18
. ● Risk of an explosion if battery is replaced by an incorrect type. ● Dispose of used batteries according to the instructions. Remote Control Receivers and Operating Range Point the remote control toward the projector (to Infrared Remote Receivers) when pressing the buttons. Maximum operating - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 19
When replacing the lens or using an optional lens, install the lens by following the instructions below. Ask the sales dealer for detailed information of the optional lens specifications. Attaching the lens to the projector 1 Remove the lens mount cover. 2 Fit the lens to the projector by - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 20
Projector (for PLC-XT25/XT20) For projector positioning, see the figures below. The projector Lens For details about the Lens shift function, refer to "Lens Shift Adjustment" on page 29. The amount of lens shift range varies depending on the lens. The figures below are for PLC-XT25/XT20. 50% 20 - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 21
power being supplied, consult your authorized dealer or service station. Connect the projector with all peripheral equipment before turning the projector on. CAUTION For safety, unplug the AC power cord when the projector is not in use. When the projector is connected to an outlet with the AC power - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 22
Audio cable (stereo) ✔Notes: •When connecting the AUDIO OUT to external audio equipment, the projector's built-in speaker is disconnected. •USB cable connection is needed when operating the computer with the remote control. •See page 78 for ordering optional cables. Unplug the power cords of both - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 23
Input VIDEO AUDIO IN AUDIO IN VIDEO S-VIDEO Audio cable (stereo) ✔Notes: •When connecting the AUDIO OUT to external audio equipment, the projector's built-in speaker is disconnected. •The S-VIDEO jack connection overrides the VIDEO jack connection when selecting AUTO in the Input Menu (p.35 - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 24
Cables used for connection • Audio Cables (Mini Plug [stereo] x 2) • Scart-VGA Cable • BNC Cable • DVI-Digital Cable (Cables are not supplied with the projector.) RGB Scart 21-pin Input Audio Output Component Video Output (Y, Cb/Pb, Cr/Pr) RGB Scart 21-pin Output Digital Output (HDCP compatible - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 25
will disappear after 30 seconds. Selected Input Source and Lamp Control Lamp control status See page 54 for the Lamp control status. ✔Note: •The Filter warning and Lamp replacement icons may appear on the screen depending on the usage state of the projector. PIN Code Input Dialog Box After the OK - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 26
the lamp life. Turn off the projector and let stand for about an hour in every 24 hours. •The running speed of cooling fans is changed according to the temperature inside the projector. •Do not put the projector in a case before the projector is cooled enough. •If the WARNING TEMP. indicators - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 27
How to Operate the On-Screen Menu The projector can be adjusted or set via the On-Screen Menu. For each adjustment and setting procedure, refer to the respective sections in this manual. 1 Press the MENU button on the top control or the remote control to display the On-Screen Menu. 2 Use the Point - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 28
the input signals. Guide Window Show the projector's operating configurations (pp.53-62). - Language - Logo - Background - Lamp control - Pointer - Remote Control - RC sensor - Display - Power management - On start - Fan control - Security - Test pattern - Warning log - Lamp counter - Filter - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 29
up to 15 percent from the central axis of the lens shift. ✔Note: •The arrow disappears at the maximum lens shift in each direction. INFO. button MENU button POINT of the projector and the signal being projected through the projector. Press the INFO. button on the top control or remote control to - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 30
When the sound is turned off, "On" is displayed. Press the Point 7 8 buttons again to turn the sound back on. Top Control VOLUME +/- buttons Remote Control VOL - button VOL + button MUTE button Volume Dialog Box Approximate level of the volume. Press the MUTE button to set the Mute function On - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 31
the desired screen size. The selected screen size symbol appears on the screen for 4 seconds. See pages 51-52 for details. LENS SHIFT button See page 29 for details. Remote Control AUTO PC button D.ZOOM button ZOOM buttons FOCUS buttons FREEZE button INFO. button POINT ed buttons SCREEN button - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 32
normal, press the NO SHOW button again or press any other button. "No show" disappears after 4 seconds. P-TIMER button Press the P-TIMER button on the remote control. The PTimer display "00:00" appears on the screen and the countdown starts (00:00-59:59). To stop the countdown, press the P-TIMER - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 33
signal of equipment connected to the projector. This projector has three input options (INPUT 1, INPUT 2, and INPUT 3) and they are categorized by different signal type. Select an input source with the INPUT button on the top control or the INPUT 1-3 buttons on the remote control, or by On-Screen - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 34
Control Operation Press the INPUT 1, INPUT 2, or INPUT 3 buttons on the remote control. The input source appears on the screen as you press each button. Select the connected input source. RGB (Scart) RGB (PC digital) RGB (AV - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 35
When the RGB PC signal is connected. Video When the RGB video signal is connected. Component* When the component signal is connected. *If the projector cannot reproduce proper video image, select a system manually (see "Video System Selection" on page 36). INPUT 3 Auto When selecting Auto, the - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 36
itself to optimize its performance. When Video System is PAL-M or PAL-N, select the system manually. PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N. Component - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 37
's INPUT 1 or INPUT 2 terminals properly? ● Are the projector's input terminal and the connected computer signal selected properly with the INPUT 1 or INPUT 2 buttons on the remote control or by the On-Screen Menu? ● Is the signal correctly output from your computer? Many of the laptop computers - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 38
(pp.40-41). ----- There is no signal input from the computer. Check the connection between your computer and the projector. (See "Troubleshooting" on page 69.) Mode 1 The preset system is manually adjusted in the PC Adjust Menu. The adjusted data can be stored in Mode 1-10 (pp.40-41). SVGA - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 39
pressing the AUTO PC button on the remote control. Remote Control AUTO PC button Menu Operation Auto the Auto PC Adjustment can be stored in the projector. Once the parameters are stored, the setting can is not provided properly with this operation, manual adjustments are required (pp.40-41). • - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 40
enables you to precisely adjust several parameters to match those signal formats. The projector has 10 independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific computer. 1 Press the MENU button to display the On-Screen Menu. Use the - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 41
Display area H Use the Point 7 8 buttons to adjust the horizontal area displayed by this projector. Display area V Use the Point 7 8 buttons to adjust the vertical area displayed by this projector. Reset To reset the adjusted data, select Reset and press the SELECT button. A confirmation box - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 42
Computer Adjustment MEMO 42 - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 43
Image Mode Selection You can choose an image mode in accordance with each projected image such as presentation screen, movies, etc. You can also adjust image parameters in the Image Adjust Menu and save them as Image 1-4. The four image modes with respect to each input source are stored. Select - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 44
pictures in a bright room. Standard Normal picture mode preset on the projector. Real Picture mode with improved halftone for graphics. (This icon is This icon is displayed with the video signal.) Image 1-4 For viewing with the user preset image mode in the Image Adjust Menu (see page 48). This Image - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 45
signal can be displayed in progressive mode reproducing highly detailed images. The adjusted parameters are stored and called up later when needed. Maximum of four user image modes (Image 1-Image 4) are available and they can be called up in the Image Menu (see "Image Mode Selection" on pages 43-44 - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 46
Image Adjustment Image Adjustment 1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Adjust Menu icon. 2 Use the Point ed buttons to move the red frame pointer to the desired item and then press the SELECT button to display the - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 47
Disabled. L1........... For an active picture. L2........... For a still picture. Film ........ For watching a film. With this function, the projector reproduces pictures faithful to the original film quality. Image Adjustment ✔Notes: •Noise reduction and Progressive cannot be selected when 480p - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 48
Image Adjustment Reset To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select [Yes]. All adjustments will return to their previous figures. Store To store the adjusted data, select Store and press the SELECT button. Use the Point ed buttons - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 49
Screen Adjustment You can change or adjust the appearance of the image as well as the image orientation with the following options. Screen size Select a screen size conforming to the input signal source. Digital zoom Zoom up and down the images. (Only available with the computer signals.) Keystone - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 50
function is set to "On," the picture is top/bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector. Ceiling Rear When this function is set to "On," the picture is left/right reversed. This function is used to project the image from the - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 51
or select an input source from the Input Menu (p.35) again, or adjust the screen size with the D.ZOOM buttons on the remote control. ✔Notes: •The projector cannot display any resolution higher than 1600 x 1200. If your computer's screen resolution is higher than that, lower the resolution before - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 52
Screen Adjustment Screen Size Adjustment (Video, Component Signals) 1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Screen Menu icon. 2 Use the Point ed buttons to move the red frame pointer to the desired function and then - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 53
the cooling fans' operation Lamp counter Check the lamp time and reset the lamp counter Filter counter Set the filter cleaning timing On start Turn on the projector automatically when the AC cord is connected. Test-pattern Convenient test patters are provided. Warning log Check the records of - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 54
Setting This projector has no input signal is detected. Blue........ Project a blue background User ....... Project an image selected in the Logo setting. Black Lower brightness reduces the lamp lower consumption and extends the lamp life. Pointer You can emphasize a part of the projected image - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 55
select function and set it to "User". Then the captured image will be displayed the next time you turn on the projector or when you press the NO by the Keystone function, the adjusted data is automatically reset and the projector captures an image without keystone correction. •When the Logo PIN code - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 56
Enter a Logo PIN code Use the Point ed buttons or Number buttons on the remote control to enter a number. Press the Point 8 button to fix the number to "Set." Press the SELECT button so that you can start to operate the projector. If you entered an incorrect Logo PIN code, "Logo PIN code" and the - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 57
when the lamp is not bright enough. Off Hide the On-Screen Displays except; ●On-Screen Menu ●"Power off?" (p.26) ●"No signal" for Power management (p.58) ●"Please wait ..." ●White arrows for the True function in the Screen Menu (p.51) ●"Filter warning" icon (red) (p.74) Remote control Display - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 58
or any button on the top control or remote control is pressed. Shut down.......... When the lamp has been fully cooled down, the power will be turned off. Off Power management function is off. On start When this function is set to "On," the projector will be automatically turned on just by - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 59
not work properly and that causes malfunctions of the projector and decreases the lamp life. Slant Select the projector's installation condition from the following options: Off When using the projector with the upward/ downward inclination of 20 degrees to the horizontal plane. L1 When using the - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 60
. Enter a PIN code Use the Point ed buttons or Number buttons on the remote control to enter a number. Press the Point 8 button to fix the number to "Set." Press the SELECT button so that you can start to operate the projector. If you entered an incorrect PIN code, "PIN code" and the number will - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 61
Various test pattern are available for use when setting up the projector. CAUTION: WHEN YOU HAVE CHANGED THE PIN CODE, WRITE DOWN warning log records will be deleted. Lamp counter This function is used to reset the lamp counter. When the lamp life is left less than 100 hours, the Lamp replacement - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 62
. Factory default This function returns all setting values except for the user logo, PIN code lock, Logo PIN code lock, lamp counter, and filter counter to the factory default settings. Quit Exit the Setting Menu. Filter warning icon (yellow) appears on the screen at a set time. ✔Note: •The - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 63
Maintenance and Filter Cleaning In order to care for the projector appropriately, regular maintenance is required. The instructions described here will help minimize the need for optical cleaning, reduce the likelihood of costly repairs, and maximize lamp life. The projector uses a lamp which - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 64
and may result in internal heat buildup and adversely affect the life of the projector. If a "Filter warning" icon (yellow or red) appears on the screen and the WARNING FILTER indicator lights or blinks, clean the filter immediately. Clean the filter by following the steps below. 1 Turn off the - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 65
Screw Handle Screws ORDER REPLACEMENT LAMP Replacement lamp can be ordered through your dealer. When ordering, give the following information to the dealer. ● Model No. of your projector : PLC-XT25, PLC-XT20, PLC-XT25L, PLC-XT20L ● Replacement Lamp Type No. : POA-LMP105 (Service Parts No. 610 330 - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 66
the lamp should be replaced, i.e., if the LAMP REPLACE indicator lights up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down. (Follow carefully the instructions in the Lamp Replacement section of this manual.) Continuous use of the lamp with the LAMP REPLACE indicator - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 67
projector away from the duct or vent. - Is the filter clean? Clean the filter periodically or replace it with a new one. The projector is shut down and all five indicators are blinking. When the projector cord and contact the service station. CAUTION DO NOT LEAVE THE PROJECTOR WITH THE AC POWER - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 68
, solvents, or other harsh chemicals might scratch the surface of the lens. When the projector is not in use, replace the lens cap. Cleaning the Projector Cabinet Unplug the AC power cord before cleaning. Gently wipe the projector body with a soft dry cleaning cloth. When the cabinet is heavily - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 69
. See page 67. - Check the projection lamp. See page 65. - Unlock the Key lock function for the projector. See page 59. - Adjust focus of the projector. See pages 29, 31. - Provide proper distance between the projector and projection screen See page 20. - Check the projection lens to see if it needs - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 70
disconnecting the AC power cord. WARNING : High voltages are used to operate this projector. Do not attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Specify the model number - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 71
PAL-N Sound Volume Mute Quit 0-63 On/Off Information Input H-sync freq. V-sync freq. Screen Language Lamp status Power management Security Key lock PIN code lock Remote control code Image Dynamic Standard Real Cinema* Image 1 Image 2 Image 3 Image 4 ✔Note: •The Menu display varies - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 72
/Off Security Key lock Off Projector (all) Projector (part) Remote control (all) Remote control (part) PIN code lock Off/On 1/On 2 PIN code change Quit Test pattern 8 test patterns provided Quit Warning log Lamp counter Hour(s) Reset Yes/No Quit Filter counter Hour(s) Off/100H - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 73
POWER green LAMP red WARNING TEMP. red Projector Condition The projector is off. (The AC power cord is unplugged.) Appendix The projector is in stand-by mode. Press the ON/STAND-BY button to turn on the projector. POWER, LAMP, WARNING TEMP., WARNING FILTER, and LAMP REPLACE indicators are - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 74
when the projector detects filter clogging. ✔Note: •The Filter warning icon (red) will not appear during "Freeze" (p.31), or "Now show" (p.32). LAMP REPLACE indicator Indicators POWER green LAMP red LAMP REPLACE yellow Projector Condition The lamp cannot light up. (The projector is preparing - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 75
Appendix Compatible Computer Specifications Basically this projector can accept the signal from all 7 SXGA 8 SXGA 9 SXGA 10 SXGA 11 SXGA 12 SXGA 13 SXGA 14 SXGA 15 SXGA 16 SXGA 17 SXGA 18 SXGA 19 SXGA 20 SXGA+ 1 SXGA+ 2 SXGA+ 3 MAC21 WXGA 1 WXGA 2 WXGA 3 WXGA 4 WXGA 6 WXGA 7 WXGA 8 UXGA 1 UXGA 2 - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 76
) 60.00 (Interlace) 50.00 (Interlace) ✔Notes: •When the input signal is D-SXGA 1, D-SXGA 2, and D-SXGA 3, images may not be displayed properly depending on computers •Specifications are subject to change without notice.. 76 - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 77
. 15 kHz-100 kHz, V-sync. 50 Hz-100 Hz Optical Information Projection Image Size (Diagonal) Throw Distance Projection Lens Projection Lamp Adjustable from 30" to 300" (PLC-XT25/PLC-XT20) 3.9'-32.8' (1.2 m-10.0 m) F=1.7 to 2.1, f=33 to 43 mm with motor zoom and focus 300 W Interface Input 1 Input - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 78
Appendix Accessories Owner's Manual (CD-ROM) Quick Reference Guide AC Power Cord Remote Control and Batteries VGA Cable USB Cable Lens Cap (for PLC-XT25/XT20) Lens Mount Cover (for PLC-XT25L/XT20L) PIN Code Label ● The specifications are subject to change without notice. ● LCD panels are - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 79
supports all commands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1. Projector Input Input 1 RGB (PC Analog) RGB (Scart) RGB (PC Digital) RGB (AV HDCP) Input 2 Video Component RGB Input 3 Auto Video S-video Input 4 Network PJLink Input RGB - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 80
DVI-D TERMINAL (DIGITAL) 12345678 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 1 T.M.D.S. Data2- 2 T.M.D.S. Data2+ 3 T.M.D.S. Data2 Shield 4 No Hot Plug Detect 17 T.M.D.S. Data0- 18 T.M.D.S. Data0+ 19 T.M.D.S. Data0 Shield 20 No Connect 21 No Connect 22 T.M.D.S. Clock Shield 23 T.M.D.S. Clock+ 24 - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 81
Number Memo Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. PIN Code Lock No. Factory default set No: 1 2 3 4* Logo PIN Code Lock No. Factory default set - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 82
Appendix Dimensions Unit: inch (mm) 13.7 (348.1) 3.40 (86.4) 6.46 (164) 5º MAX 1.65 (41.9) 21.09 (535.7) 17.48 (444) 82 10.85 (275.5) 11.10 (282) 7.87 (200) Screw Holes for Ceiling Mount Screw: M6 Depth: 0.393 (10.0) - Sanyo XT25 | Instruction Manual, PLC-XT25 - Page 83
SANYO Electric Co., Ltd.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
 |
 |
Multimedia Projector
MODEL
PLC-XT25/PLC-XT20
PLC-XT25L
*
/PLC-XT20L
*
(*Models without lens.)
Owner’s Manual