Sanyo XU51 Instruction Manual, PLC-XU51

Sanyo XU51 - PLC XGA LCD Projector Manual

Get Sanyo XU51 - PLC XGA LCD Projector PDF manuals and user guides View all Sanyo XU51 manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo XU51 manual content summary:

  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 1
    Multimedia Projector MODEL PLC-XU58 PLC-XU56 PLC-XU51 PLC-SU51 Owner's Manual
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 2
    and matrix liquid crystal display (LCD) technology. ◆ Compact Design This projector is designed compact in size The PIN code lock function prevents others except users from using the projector. (See page 20 and 47.) ◆ Digital lamp life. (See page 45.) ◆ Switchable Interface Terminal The projector
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 3
    Projection Lens 51 Cleaning the Projector Cabinet 51 Lamp Replacement 52 Lamp Replace Counter 53 Appendix 54 Troubleshooting 54 Menu Tree 56 Indicators and Projector Condition 58 Compatible Computer Specifications 59 Technical Specifications 60 Optional Parts 61 Configurations
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 4
    problem still persists, contact the dealer where you purchased the projector or the service center. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 5
    , be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or injury to persons. Upon completion of any service or repairs to this projector, ask the
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 6
    fans are provided to cool down the projector. This projector monitors internal temperature and control the running speed of the cooling fans. Installing the Projector in Proper Position Install the projector properly. Improper Installation may reduce the lamp life and cause a fire hazard. 20˚ Do
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 7
    otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Model Numbers Trade Name Responsible party Address Telephone No. : PLC-XU58, PLC-XU56, PLC-XU51, PLC-SU51 : Sanyo : SANYO FISHER COMPANY : 21605
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 8
    Bottom !2 !3 !1 !4 q Power Cord Connector w Infrared Remote Receiver e Zoom Lever r Focus Ring t Projection Lens y Lens Cover (See page 50 for attaching.) u Air Intake Vent i Top Controls and Indicators o Air Intake Vent !0 Terminals and Connectors !1 Speaker !2 Lamp Cover !3 Air Intake Vent (back
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 9
    q or o to this jack. (p 17, 19) w SERVICE PORT This jack is used to service this projector. e AUDIO IN Connect the audio output from video equipment connected t USB (Series B) When operating the connected computer with the remote control, connect USB port of your computer to this connector with a
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 10
    Functions Top Control qw er t y ON - OFF INPUT POWER WARNING VOLUME - VOLUME + AUTO SET UP MENU SELECT LAMP REPLACE o internal temperature of the projector exceeds the operating range. (p49, 58) u LAMP REPLACE indicator Turns yellow when the life of the projection lamp draws to an end.
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 11
    indicator lights red while the laser beam is being emitted from the laser light window or a signal is being sent from the remote control to the projector. e AUTO PC button Operates the Auto PC adjustment function. (p29) r D.ZOOM button Selects the Digital zoom +/- mode and resize the image. (p34
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 12
    so that the Pointer function will be available. (The Laser pointer has switched to the Pointer.) 2 Press the LASER button on the remote control toward the projector. Spotlight or Pointer is displayed on the screen with the LASER button lighting green. Then move the Spotlight or Pointer with the
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 13
    R-CLICK button Acts as right click while the projector and a computer are connected with a USB cable. Operating Range Point the remote control toward the projector (Infrared Remote Receiver) whenever pressing any button. Maximum operating range for the remote control is about 16.4' (5m) and 60° in
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 14
    the remote control to moisture, or heat. ● Do not drop the remote control. ● If a battery has leaked on remote control, carefully wipe case clean and install new batteries. ● Risk of explosion if battery is replaced by an incorrect type. ● Dispose of used batteries according to the instructions. 14
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 15
    . 3 To retract the adjustable feet, lift the front of the projector and pull and undo the feet lock latches. Keystone distortion of the projected image can be adjusted automatically with Auto Setup function or manually with the remote control or the menu operation. (p24, 25, and 42) Adjustable Feet
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 16
    plug into any other type of power system. Consult your authorized dealer or service station if you are not sure of the type of power being supplied. Connect the projector with all peripheral equipment before turning the projector on. (See page 17-19 for connection.) CAUTION For safety, unplug AC
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 17
    • USB Cable • Audio Cables (Mini Plug: stereo Not supplied with this projector.) Monitor Input Audio Output Audio cable (stereo) ✽ USB port USB cable COMPUTER IN 1 DVI - I AUDIO IN R L (MONO) VIDEO USB SERVICE PORT S-VIDEO COMPUTER / COMPONENT RESET MCI COMPUTER IN 2 / COMPONENT IN
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 18
    VIDEO Cable ✽ • Audio Cable (Mini Plug: stereo Not supplied with this projector.) S-Video Output Composite Video and Audio Output (R) (L) (Video) S-Video IN 1 DVI - I AUDIO IN R L (MONO) VIDEO USB SERVICE PORT S-VIDEO COMPUTER / / CCOOMMPPOONNEENNTT RESET MCI COMPUTER IN 2 / COMPONENT
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 19
    2) ✽ • Scart-VGA Cable ✽ • Component-VGA Cable ✽ (✽ = Not supplied with this projector.) Installation RGB Scart 21-pin Output Component Video Output (Y, Pb/Cb, Pr/Cr) Audio Output Scart II AUDIO IN R L (MONO) VIDEO USB SERVICE PORT S-VIDEO COMPUTER / / CCOOMMPPOONNEENNTT RREESSEETT MCI
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 20
    is a security code using Personal Identification Number that allows the person who knows it to operate the projector. Setting PIN code prevents others except the specific users from operating the projector. A PIN code consists of a four-digit number. Refer to PIN Code Lock function in Setting on
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 21
    continuously without rest. Continuous use may result in shortening the lamp life. Turn off the projector and give it a rest about an hour in every 24 hours. • This projector monitors internal temperature and automatically controls the running speed of the cooling fans. • If the WARNING indicator
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 22
    Operation How to Operate the On-Screen Menu The projector can be adjusted or set via the On-Screen exit this menu. Remote Control POINT button SELECT button MENU button Top Control ON - OFF INPUT POWER WARNING VOLUME - VOLUME + AUTO SET UP MENU SELECT LAMP REPLACE POINT button (outer
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 23
    Basic Operation Menu Bar For computer source Guide Window Shows the selected Menu of the True / Wide / Digital zoom +/-] (p34) Setting Menu Used to change settings of the projector or reset lamp replace counter. (p42-48) Basic Operation Input Menu Used to select input source either Computer or
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 24
    be corrected properly by pressing the AUTO SETUP/ AUTO SET button, adjust manually by pressing the KEYSTONE button on the remote control or selecting Keystone in the Setting menu. (p25, 42) Remote Control AUTO SET button Top Control ON - OFF INPUT POWER WARN VOLUME - VOLUME + AUTO SET UP MENU
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 25
    top control or the AUTO SET on the remote control, correct the image manually as follows: 1 Press the KEYSTONE button on the remote control or or press any other button. When a projected image is captured and set as "User" in the Logo item in the Setting Menu (p44), the screen changes each time
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 26
    the screen for a few seconds. (+) button to turn up the volume and (-) button to turn down the volume. Mute Press the MUTE button on the remote control to cut off sound. To restore sound to its previous level, press the MUTE button again or press the VOLUME (+/-) button. Menu Operation 1 Press the
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 27
    by pressing the INPUT button on the top control or press the COMPUTER button on the remote control. Before using these buttons, correct input source . The specification of HDCP is decided and controlled by Digital Content Protection, LLC. Should the specification be changed, this projector may not
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 28
    Menu The Auto PC Adjustment function operates to adjust the projector. ----- There is no signal input from computer. Check the connection of your computer and the projector. (See " Troubleshooting" p54) Mode 1 User preset system manually adjusted in PC Adjust menu. Adjustment data can be stored
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 29
    on the remote control unit. To store adjustment parameters Adjustment parameters from Auto PC Adjustment can be memorized in this projector. Once PC Adjustment function. When the image is not provided properly with this operation, manual adjustments are required. (p30, 31) • The Auto PC Adj. cannot
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 30
    enables you to precisely adjust several parameters to match those signal formats. The projector has 5 independent memory areas to memorize those parameters manually adjusted. It allows you to recall the setting for a specific computer. 1 Press the MENU button and the On-Screen Menu will appear
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 31
    . Press the Point 7 8 button to decrease/increase value and then press the SELECT button. Display area V Adjusts the vertical area displayed by this projector. Press the Point 7 8 button to decrease/increase value and then press the SELECT button. Full screen With this function on, SXGA image is
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 32
    the remote control. Dynamic Picture level suitable for viewing picture in a bright room. Standard Normal picture level preset on this projector. green colored board, not truly effective on a black colored board. Image 1~4 User preset image in the Image Adjust Menu (p33). Menu Operation 1 Press the
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 33
    8 button to obtain better balance of contrast. (From 0 to 15.) Reset Resets all adjustment to their previous levels. Store To store the image data adjusted manually, move the red frame pointer to the Store icon and press the SELECT button. The Image Level Menu will appear. Move the red frame pointer
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 34
    the screen size (1024 x 768 for PLC-XU58/ PLC-XU56/ PLC-XU51, 800 x 600 for PLC-SU51), this projector enters "Digital zoom +" mode automatically. Wide image can be also compressed by pressing the D.ZOOM ▼ button on the remote control. To exit the Digital zoom +/- mode, press any button except the D.
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 35
    pressing the INPUT button on the top control or the VIDEO button on the remote control. Before using these buttons, correct input source selecting Auto, the projector automatically detects incoming video signal, and adjusts itself to optimize its performance. The projector selects connection in the
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 36
    Selection (Component, RGB Scart 21-Pin) Direct Operation Choose Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control. Before using these buttons, correct input source should be selected through menu operation as described below. INPUT button
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 37
    to optimize its performance. When Video System is PAL-M or PAL-N, select system manually. PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N If the projector cannot reproduce proper video image, it is necessary to select a specific broadcast signal format among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 38
    the remote control. Dynamic Picture level suitable for viewing picture in a bright room. Standard Normal picture level preset on this projector. Cinema projected on a Blackboard (Green). See above for further description. Image1~4 User preset image in the Image Adjust Menu (p39, 40). Image Select
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 39
    Image Level Adjustment 1 Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move the red frame pointer to the Image Adjust Menu icon. 2 Press the Point d button to move the red frame pointer to the item that you want to adjust and then press the SELECT button.
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 40
    picture. L2 . . . . .Select "L2" for a still picture. Film This function is effective on 3-2 pulldown video sources. With this function On, the projector reproduces pictures faithful to the original film quality. Reset Resets all adjustment to their previous figure. Store To store the adjustment
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 41
    Video Input Screen Size Adjustment This projector has a picture screen resize function, which enables you to display the desirable image size. 1 Press the MENU button and the On-Screen Menu will appear.
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 42
    . Auto Keystone Auto always works and corrects keystone distortion according to the projector's tilt. Manual . . . .works only when pressing the AUTO SET button on the remote control or the AUTO SETUP button on the top control. Off disables Auto Keystone. ✔Note: • Auto PC Adj. and Auto Keystone
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 43
    Setting Blue back When this function is "On," the projector produces a blue image while input signal is not no longer change the Logo PIN code setting. For details on PIN code setting, refer to relevant instructions of the PIN Code Lock function on page 47. Logo PIN Code Lock Logo PIN Code Lock
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 44
    the Logo function and set it to "User". Then the captured image can be displayed when turning on the projector next time or pressing the NO SHOW reversed. This function is used to project the image from a ceiling mounting the projector. Rear When this function is "On," the picture is left/right
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 45
    reconnected or any button on the top control or remote control unit is pressed. Shutdown . . .When the lamp has been fully cooled down, the power will be turned off. Off The Power Management function is canceled. On start When this function is "On," the projector is automatically turned on just by
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 46
    Spotlight or a pointer of three different patterns (Arrow, Finger, and Dot) of Pointer. (See page 12 for operation.) Remote control This projector provides eight different remote control codes (Code 1-Code 8); the factory-set, initial code (Code 1) and the other seven codes (Code 2 to Code 8). This
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 47
    PIN CODE NO. MEMO ON PAGE 63, AND KEEP IT SECURELY. SHOULD THE PIN CODE BE LOST OR FORGOTTEN, THE PROJECTOR CAN NO LONGER BE OPERATED. PIN code lock When the projector is locked with the PIN code, the PIN code lock mark appears on the menu bar. Enter a PIN code Pointer
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 48
    . In this mode, cooling time after turning off the projector will be extended longer than in the normal mode. Lamp counter reset This function is used to reset the lamp replace counter. When replacing the projection lamp, reset the lamp replace counter by using this function. See page 53 for
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 49
    , disconnect the AC power cord and contact the service station for check and repair. CAUTION DO NOT LEAVE THE PROJECTOR WITH THE AC POWER CORD CONNECTED UNDER THE ABNORMAL CONDITION. IT MAY RESULT IN FIRE OR ELECTRIC SHOCK. TOP CONTROL WARNING LECT LAMP REPLACE VOLUME + WARNING lights red 49
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 50
    symptoms above are noticed, contact your authorized dealer or service station for proper cleaning. Air Filter Pull up and remove. Attaching the Lens Cover When moving this projector or while not using it over an extended period of time, replace the lens cover. 1 Pass the string through a hole of
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 51
    of cleaner. Abrasive cleaners, solvents, or other harsh chemicals might scratch the surface. 3 When the projector is not in use, replace the lens cover. Cleaning the Projector Cabinet Follow these steps to clean the projector cabinet. 1 Disconnect the AC power cord before cleaning. 2 Softly wipe the
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 52
    can be ordered through your dealer. When ordering a projection lamp, give the following information to the dealer. ● Model No. of your projector ● Replacement Lamp Type No. : PLC-XU58/ PLC-XU56/ PLC-XU51/PLC-SU51 : POA-LMP55 (for PLC-XU58/PLC-XU51) (Service Parts No. 610 309 2706) POA-LMP65 (for
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 53
    should be replaced, i.e., if the LAMP REPLACE indicator lights up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down. ( Follow carefully the instructions in the Lamp Replacement section of this manual. ) Continuous use of the lamp with the LAMP REPLACE indicator lighted
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 54
    Troubleshooting Before calling your dealer or service center for assistance, check the items below once again. - Make sure you have properly connected the projector monitor output when connecting to a projector. See your computer's instruction manual for the setting. - It takes about 20 seconds
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 55
    See page 17.) WARNING : High voltages are used to operate this projector. Do not attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Give the model number and explain about the
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 56
    Appendix Menu Tree Computer Input / Video Input Input Computer 1 Computer 2 Video Sound Sound Volume Mute Quit Computer Input System (1) MODE 1 MODE 2 SVGA 1 - - - - ✽Systems displayed in the System Menu vary depending on an input signal. PC Adjust Auto PC Adj. Fine sync. Total dots
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 57
    start Lamp mode Pointer Remote control USB Key lock PIN code lock Fan Lamp User Default Yes/No On / Off On / Off Computer 2 Monitor out Eco / Normal Off Ready Shut down Timer(1-30 Min) Quit On / Off Normal Auto Eco Spotlight Pointer Quit Code 1 - 8 Quit Mouse / Projector Off Projector Remote Control
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 58
    or the service center for service and checkup. Do not leave the projector on. It may cause electric shock or a fire hazard. • • • lights green. • • • blinks green. • • • lights red. • • • blinks red. • • • off ✽ When the life of the projection lamp draws to an end, the LAMP REPLACE indicator
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 59
    Specifications PLC-XU58/PLC-XU56/PLC-XU51 can basically accept the signal from all computers with the V, H-Frequency mentioned below and less than 140 MHz of Dot Clock. PLC than 100 MHz of Dot Clock. These modes are not available on PLC-SU51. ON-SCREEN DISPLAY RESOLUTION VGA 1 640 x 480 VGA 2
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 60
    Projector 11.73" x 2.8" x 8.58" (298mm x 71mm x 218mm) (Not including adjustable feet) 6.2 lbs (2.8kgs) 0˚ to 11.8˚ Panel Resolution LCD Panel System Panel Resolution Number of Pixels PLC-XU58/PLC-XU56/XU51 ~ 140 ˚F (-10˚C ~ 60 ˚C) Remote Control Battery Operating Range Dimensions Net Weight AA,
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 61
    Appendix Appendix Accessories Owner's Manual AC Power Cord Remote Control and Batteries DVI-VGA Cable USB Cable Lens Cover with String and Screw Soft Carrying Bag PIN Code Label ● The specifications are subject to change without notice. ● LCD panels are manufactured to the highest possible
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 62
    (DIGITAL/ANALOG) Terminal : DVI-I C1 C2 12345678 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 C3 C4 C5 SERVICE PORT CONNECTOR Terminal : Mini DIN 8-PIN 876 5 43 21 C1 Analog Red Input C2 Analog Green Input C3 Analog Blue Input C4 Analog Horiz. sync
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 63
    Number Memo Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. PIN Code Lock No. Factory default set No: 1 2 3 4* Logo PIN Code Lock No. Factory default set
  • Sanyo XU51 | Instruction Manual, PLC-XU51 - Page 64
    Printed in Japan Part No. 610 314 6645 (1AA6P1P4532-- MT7A) SANYO Electric Co., Ltd.
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
Multimedia Projector
MODEL
PLC-XU58
PLC-XU56
PLC-XU51
PLC-SU51
Owner’s Manual