Sanyo plc-xu38 Owners Manual

Sanyo plc-xu38 - XGA LCD Projector Manual

Get Sanyo plc-xu38 - XGA LCD Projector PDF manuals and user guides View all Sanyo plc-xu38 manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo plc-xu38 manual content summary:

  • Sanyo plc-xu38 | Owners Manual - Page 1
    Multimedia Projector MODEL PLC-XU33 PLC-XU38 Owner's Manual
  • Sanyo plc-xu38 | Owners Manual - Page 2
    operate improperly, read this manual again, check operations and cable connections and try the solutions in the "TROUBLESHOOTING" section at the end of this booklet. If the problem still persists, contact the sales dealer where you purchased the projector or the service center. SAFETY PRECAUTIONS
  • Sanyo plc-xu38 | Owners Manual - Page 3
    and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Follow all warnings and instructions marked on the projector. For added protection to the projector during a lightning storm, or when it is
  • Sanyo plc-xu38 | Owners Manual - Page 4
    Numbers Trade Name Responsible party Address Telephone No. : PLC-XU33, PLC-XU38 : Sanyo : SANYO FISHER COMPANY : 21605 Plummer Street, Chatsworth, California 91311 : (818)998-7322 AC POWER CORD REQUIREMENT The AC Power Cord supplied with this projector meets the requirement for use in the country
  • Sanyo plc-xu38 | Owners Manual - Page 5
    COMPUTER SYSTEM COMPATIBLE COMPUTER SPECIFICATIONS 22 23 PC ADJUSTMENT 24 NAME OF EACH PART OF PROJECTOR 7 AUTO PC ADJUSTMENT 24 SETTING-UP PROJECTOR 8 MANUAL PC ADJUSTMENT 25 CONNECTING AC POWER CORD 8 PICTURE IMAGE ADJUSTMENTS 27 POSITIONING PROJECTOR 9 IMAGE LEVEL SELECT 27
  • Sanyo plc-xu38 | Owners Manual - Page 6
    solves this problem by digitally altering projection to produce undistorted images. N Power Management Power Management function is provided to reduce power consumption while a projector is not in use. This Power Management function operates to turn Projection Lamp off when a projector detects
  • Sanyo plc-xu38 | Owners Manual - Page 7
    part. This area will become hot while a projector is used. This projector detects internal temperature and automatically controls operating power of Cooling Fans. LENS COVER BACK TOP CONTROLS AND INDICATORS INFRARED REMOTE RECEIVER POWER CORD CONNECTOR BOTTOM LAMP COVER ADJUSTABLE FEET AND
  • Sanyo plc-xu38 | Owners Manual - Page 8
    shock, do not plug into any other type of power system. Consult your authorized dealer or service station if you are not sure of the type of power supply being in use. Connect a projector with a peripheral equipment before turning a projector on. (Refer to pages 11 ~ 13 for connection.) CAUTION
  • Sanyo plc-xu38 | Owners Manual - Page 9
    on a flat projection surface. G The projector can be focused from 3.0'(0.9m) ~ 22 the front of the projector and pull FEET LOCK LATCHES on the both sides of the projector. 2 Release FEET LOCK retract ADJUSTABLE FEET, lift the front of the projector and pull and undo FEET LOCK LATCHES. Keystone distortion
  • Sanyo plc-xu38 | Owners Manual - Page 10
    carrying bag) supplied with a projector. CAUTION Carrying Bag (supplied) is intended for protection from dust and scratches on the surface of a cabinet, and it is not designed to protect an appliance from external forces. Do not transport a projector through a courier or transport services with this
  • Sanyo plc-xu38 | Owners Manual - Page 11
    / Wireless Imager TERMINAL Connect computer output (Digital / Analog DVI-I type), Media Card Imager*, or Wireless Imager* to this terminal. *optional accessories USB CONNECTOR (Series B) When controlling the computer with Remote Control Unit of this projector, connect USB port of your personal
  • Sanyo plc-xu38 | Owners Manual - Page 12
    OUT NOTE : When connecting the cable, the power cords of both the projector and the external equipment should be disconnected from AC outlet. Turn the projector and peripheral equipment on before the computer is switched on. N MAC ADAPTER (Not supplied) Set switches as shown in the table ON
  • Sanyo plc-xu38 | Owners Manual - Page 13
    Cables used for connection (✽ = Cable is not supplied with this projector.) • Video Cable (RCA x 1 or RCA RESET MCI / WI MONITOR OUT USB CONTROL PORT AUDIO OUT AUDIO IN Terminals of the Projector Audio Cable (Stereo) ✽ NOTE : When connecting the cable, the power cords of both the projector
  • Sanyo plc-xu38 | Owners Manual - Page 14
    ALL-OFF SWITCH When using Remote Control Unit, turn this switch to "ON." And turn it to "ALL OFF" when DIGITAL ZOOM +/- mode. (P29) It is also used as a PC mouse in Wireless Mouse Operation. (P39) KEYSTONE NO SHOW FREEZE AUTO PC ADJ. IMAGE P-TIMER POWER ON-OFF BUTTON Used to turn projector
  • Sanyo plc-xu38 | Owners Manual - Page 15
    keystone distortion. (P20, 35) NO SHOW BUTTON Used to turn the picture into black image. (P21) AUTO PC ADJ. DIGITAL ZOOM +/- mode and resize image. (P29) Operating Range Point Remote Control Unit toward projector (Receiver Window) whenever pressing any button. Maximum operating range for Remote
  • Sanyo plc-xu38 | Owners Manual - Page 16
    INDICATOR Lights green when the projector is ready to be turned on. And it flashes green in Power Management mode. (P36) RLEAPMLPACE WATRENMIPN.G VOLUME - INPUT IMAGE MENU READY VOLUME + LAMP SELECT ZOOM FOCUS LAMP INDICATOR Becomes dim when the projector is turned on. And it is bright
  • Sanyo plc-xu38 | Owners Manual - Page 17
    TO OPERATE ON-SCREEN MENU You can control and adjust this projector through ON-SCREEN MENU. Refer to the following pages to operate each adjustment on ON-SCREEN MENU. 1 DISPLAY MENU Press MENU button to display ON-SCREEN MENU. REMOTE CONTROL UNIT ON -- OFF 2 MOVING POINTER Move the pointer (✽ see
  • Sanyo plc-xu38 | Owners Manual - Page 18
    Press MENU BUTTON while connecting to PC input source. GUIDE WINDOW Shows selected item of ONSCREEN MENU. PC SYSTEM size of image. [Normal / True / Wide / Digital zoom +/-] (Refer to P29) SETTING MENU Used to change settings of projector or reset Lamp Replace Counter. (Refer to P35, 36) INPUT
  • Sanyo plc-xu38 | Owners Manual - Page 19
    ON-OFF button on Top Control or on Remote Control Unit, and a message "Power off?" appears on a screen. 2 Press POWER ON-OFF button again to turn off the projector. LAMP Indicator lights bright and READY Indicator is turned off. After projector is turned off, Cooling Fans operate (for 90 seconds
  • Sanyo plc-xu38 | Owners Manual - Page 20
    Arrows are white in no correction. • Arrow(s) of direction being corrected turn(s) red. • Arrow(s) disappear(s) at the maximum correction. Reduce the upper with POINT RIGHT button. PICTURE FREEZE FUNCTION Press FREEZE button on Remote Control Unit to freeze the picture on-screen. To cancel FREEZE
  • Sanyo plc-xu38 | Owners Manual - Page 21
    show Message disappears after 4 seconds. P-TIMER FUNCTION Press P-TIMER button on Remote Control Unit. The timer display "00 : 00" appears on the screen and 4 seconds. MENU OPERATION 1 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer
  • Sanyo plc-xu38 | Owners Manual - Page 22
    from computer. Make sure the connection of computer and a projector is set correctly. (Refer to TROUBLESHOOTING on page 41.) PC SYSTEM MENU SYSTEM Menu icon Displays system being selected. SELECT COMPUTER SYSTEM MANUALLY This projector automatically selects PC system among those provided in this
  • Sanyo plc-xu38 | Owners Manual - Page 23
    COMPUTER INPUT COMPATIBLE COMPUTER SPECIFICATIONS Basically this projector can accept the signal from -------- 1035i (HDTV) -------- 1080i 60(HDTV) -------- 1080i 50(HDTV) -------- When an input signal is digital from DVI terminal, refer to the chart below. H-Freq. (kHz) 61.00 35.522 46.90 47
  • Sanyo plc-xu38 | Owners Manual - Page 24
    Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to Remote Control Unit. Store adjustment parameters. Adjustment parameters from Auto PC Adjustment can be memorized in this projector not provided properly through this function, manual adjustments are required. (Refer to
  • Sanyo plc-xu38 | Owners Manual - Page 25
    to precisely adjust several parameters to match with those special signal formats. This projector has 5 independent memory areas to memorize those parameters manually adjusted. This enables you to recall the setting for a specific computer whenever you use it. Note : This PC ADJUST Menu cannot be
  • Sanyo plc-xu38 | Owners Manual - Page 26
    Display area V Adjustment of vertical area displayed with this projector. Press POINT LEFT/RIGHT button(s) to decrease/increase value and clear and then press SELECT button. Other icons operate as follows. Reset Reset all adjust parameters on adjustment dialog box to previous figure. Vacant Mode
  • Sanyo plc-xu38 | Owners Manual - Page 27
    2, Image 3 and Image 4 by pressing IMAGE button on Top Control or on Remote Control Unit. Standard Normal picture level preset on this projector. Real Picture level with improved halftone for graphics. IMAGE 1~4 User preset picture adjustment in IMAGE ADJUST Menu (P28). IMAGE button Standard Real
  • Sanyo plc-xu38 | Owners Manual - Page 28
    3 Store To store manually preset image, move a red frame pointer to Store icon and press SELECT button. Image Level Menu will appear. Move a red frame pointer to the Image 1 to 4 where you want to set and then press SELECT button. Other icons operate as follows. Reset Reset
  • Sanyo plc-xu38 | Owners Manual - Page 29
    projector has a picture screen resize function, which enables you to display the desirable image size. 1 Press MENU button and ON-SCREEN MENU will ), this projector enters "Digital zoom +" Remote Control Unit. Digital zoom - When Digital reset the resolution to the lower before connecting projector.
  • Sanyo plc-xu38 | Owners Manual - Page 30
    pressing INPUT button on Top Control or on Remote Control Unit. If projector cannot reproduce proper video source, select correct input Select Menu will appear. 3 Move a pointer to the source that you want to select and then press SELECT button. Auto Video Projector automatically detects incoming
  • Sanyo plc-xu38 | Owners Manual - Page 31
    to optimize its performance. When Video System is PAL-M or PAL-N, select system manually. PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N If projector cannot reproduce proper video image, it is necessary to select a specific broadcast signal format among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL
  • Sanyo plc-xu38 | Owners Manual - Page 32
    Image 3 and Image 4 by pressing IMAGE button on Top Control or on Remote Control Unit. Standard Normal picture level preset on this projector. Cinema Picture level adjusted for the picture with fine tone. IMAGE 1~4 User preset picture adjustment in IMAGE ADJUST Menu (P33, 34). IMAGE button Standard
  • Sanyo plc-xu38 | Owners Manual - Page 33
    VIDEO INPUT IMAGE LEVEL ADJUSTMENT 1 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button(s) to move a red frame pointer to IMAGE ADJUST Menu icon. 2 Press POINT DOWN button to move a red frame pointer
  • Sanyo plc-xu38 | Owners Manual - Page 34
    Menu will appear. Move a red frame pointer to the Image Level 1 to 4 and then press SELECT button. Other icons operate as follows. Reset Reset all projector has a picture screen resize function, which enables you to display the desirable image size. 1 Press MENU button and ON-SCREEN MENU will
  • Sanyo plc-xu38 | Owners Manual - Page 35
    projector will produce a blue image instead of the video noise on the screen when any input source is unplugged or turned G "Power off?" message Logo When this function is "On," projector displays our project the image from a ceiling mounting the projector. Ceiling function Rear When this function
  • Sanyo plc-xu38 | Owners Manual - Page 36
    to flash after cooling down Projection Lamp about for 90 seconds (Power Management mode). In this Power Management mode, Projection Lamp is automatically turned on when the input signal is connected or projector is operated with any button on Top Control or on Remote Control Unit again. On start
  • Sanyo plc-xu38 | Owners Manual - Page 37
    SCREW HANDLE ORDER REPLACEMENT LAMP Replacement Lamp can be ordered through your dealer. When ordering a Projection Lamp, give the following information to the dealer. G Model No. of your projector : G Replacement Lamp Type No. : PLC-XU33 / PLC-XU38 POA-LMP35 (Service Parts No. 610 293
  • Sanyo plc-xu38 | Owners Manual - Page 38
    REPLACE COUNTER Be sure to reset the Lamp Replace Counter after the Lamp Assembly is replaced. When the Lamp Replace Counter is reset, the LAMP REPLACE Indicator stops lighting. 1 Turn projector on, press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button(s) to move a red
  • Sanyo plc-xu38 | Owners Manual - Page 39
    Remote Control Unit as Wireless Mouse for a Personal Computer, installation of the mouse driver (not supplied) is required. Make sure that the mouse driver of this projector with Control Cable (or USB cable). (Refer to page 11, 12 for connection.) 2 Turn the projector on first, and then turn on your
  • Sanyo plc-xu38 | Owners Manual - Page 40
    will reduce Cooling Fans' effectiveness and may result in internal heat build up and adversely affect the life of the projector. Clean Air Filter following the steps below: 1 Turn off the projector, and disconnect AC power cord from the AC outlet. 2 Turn the projector dealer or service station for
  • Sanyo plc-xu38 | Owners Manual - Page 41
    rather than with the projector. (When you reconnect the projector, be sure to turn the computer and monitor off before you power up the projector. Turn the projector on, and then the computer.) 6. If the problem still exists, check the following chart. Problem: No power. Try these Solutions G Plug
  • Sanyo plc-xu38 | Owners Manual - Page 42
    to open the cabinet. If the problem still persists after following all operating instructions, contact the sales dealer where you purchased the projector or the service center. Give the model number and explain about the problem. We will advise you how to obtain service. 42 This symbol on the
  • Sanyo plc-xu38 | Owners Manual - Page 43
    ) : 0.35 lbs (160 g) (including batteries) Owner's Manual AC Power Cord Remote Control Unit and Batteries VGA Cable Control Cable for PS/2 port DVI/VGA Adapter Carrying Bag Lens Cover G The specifications are subject to change without notice. G LCD panels are manufactured to the highest possible
  • Sanyo plc-xu38 | Owners Manual - Page 44
    32 1 10 9 8 7 6 15 14 13 12 11 1 Red Input 9 +5V Power 2 Green Input 10 Ground (Vert.sync.) 3 Blue Input 11 Sense 0 4 Sense 2 14 Vert. sync. 7 Ground (Green) 15 DDC Clock 8 Ground (Blue) DVI-I TERMINAL (DIGITAL/ANALOG) Pin Configuration C1 C2 12345678 9 10 11 12 13 14 15 16 17 18 19 20
  • Sanyo plc-xu38 | Owners Manual - Page 45
    GND GND USB CONNECTOR (Series B) Pin Configuration 21 34 1 Vcc 2 - Data 3 + Data 4 Ground APPENDIX OPTIONAL PARTS The parts listed below are optionally supplied. When ordering those parts, give the name and Type No. to the sales dealer. G Control Cable (Serial Port) G Control Cable (ADB Port
  • Sanyo plc-xu38 | Owners Manual - Page 46
    46
  • Sanyo plc-xu38 | Owners Manual - Page 47
    47
  • Sanyo plc-xu38 | Owners Manual - Page 48
    Printed in Japan Part No. 610 300 4426 (1AA6P1P3394-- MH8A) SANYO Electric Co., Ltd
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
Multimedia Projector
MODEL
PLC-XU33
PLC-XU38
Owner’s Manual