Schwinn 270 Journey 2.5 Recumbent Bike Assembly and Owner's Manual
Schwinn 270 Journey 2.5 Recumbent Bike Manual
View all Schwinn 270 Journey 2.5 Recumbent Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Schwinn 270 Journey 2.5 Recumbent Bike manual content summary:
- Schwinn 270 Journey 2.5 Recumbent Bike | Assembly and Owner's Manual - Page 1
270 / 230 / 430 / 470 / 2.5 Manual en Español Latino Americano: http://www.schwinnfitness.com ASSEMBLY MANUAL / OWNER'S MANUAL - Schwinn 270 Journey 2.5 Recumbent Bike | Assembly and Owner's Manual - Page 2
Machine 18 Console Service Mode 36 Leveling the Machine 19 Maintenance 37 Maintenance Parts 38 Important Safety Instructions 20 Troubleshooting 40 Features 21 Warranty 42 Console Features 22 Sears Customer Warranty 43 To validate warranty support, keep the original - Schwinn 270 Journey 2.5 Recumbent Bike | Assembly and Owner's Manual - Page 3
read and understand the Assembly instructions. • Keep bystanders and children parts can cause a risk to users, keep the machine from operating correctly and void the warranty. • Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the Manual - Schwinn 270 Journey 2.5 Recumbent Bike | Assembly and Owner's Manual - Page 4
• Not intended for use by anyone under 14 years of age. • Prior to use, read and understand the Owner's Manual. • Injury or death is possible if Caution is not used while using this machine. • The maximum user weight for Class B digital device, pursuant to Part 15 of the FCC Rules. The• - Schwinn 270 Journey 2.5 Recumbent Bike | Assembly and Owner's Manual - Page 5
For safe operation, the location must be on a hard, level surface. Allow a workout area of a minimum 74.6" x 110.5" (189.5 cm x 280.5 cm). Basic ) to tighten, and the left (counterclock- wise) to loosen, unless instructed otherwise. • When attaching 2 pieces, lightly lift and look through the - Schwinn 270 Journey 2.5 Recumbent Bike | Assembly and Owner's Manual - Page 6
PARTS 17 16 15 14 13 12 2 1 5 6 7 3 4 9 11 8 10 Item Qty Description 1 1 Console 2 1 Water Bottle Holder 3 1 Seat Back 4 1 Seat Cover 5 1 Seat Frame Assembly 6 1 Seat Bottom 7 1 Seat Adjustment Handle 8 1 Rear Stabilizer 9 1 Frame Item Qty Description 10 1 AC Adapter - Schwinn 270 Journey 2.5 Recumbent Bike | Assembly and Owner's Manual - Page 7
HARDWARE / TOOLs A B C D Item Qty Description A 8 Button Head Hex Screw, M8x20 B 10 Button Head Hex Screw, M6x12 C 4 Flat Washer, M8 D 8 Lock Washer, M8 E 10 Flat Washer, M6 E F G H I J Item Qty Description F 2 Phillips Head Screw, M5x12 G 14 Lock Washer, M6 H 4 Curved - Schwinn 270 Journey 2.5 Recumbent Bike | Assembly and Owner's Manual - Page 8
ASSEMBLY 1. Attach Stabilizers to Frame Note: H ardware is pre-installed and not on the Hardware Card. * 6mm X2 * * * 6mm X2 * * * 8 9 12 8 - Schwinn 270 Journey 2.5 Recumbent Bike | Assembly and Owner's Manual - Page 9
2. Attach the Seat Frame Assembly to the Seat Rail NOTICE: Do not crimp the Heart Rate Cable. Once all hardware has been inserted, be sure to fully tighten it. 6mm X4 A D C 5 X2 B GE 4mm 9 - Schwinn 270 Journey 2.5 Recumbent Bike | Assembly and Owner's Manual - Page 10
3. Attach Seat Pads to Seat Frame Assembly 3 6 X8 E G B 4mm X4 H G I #2 10 - Schwinn 270 Journey 2.5 Recumbent Bike | Assembly and Owner's Manual - Page 11
4. Attach Cover to Frame Assembly 4 11 - Schwinn 270 Journey 2.5 Recumbent Bike | Assembly and Owner's Manual - Page 12
5. Attach Seat Adjustment Handle to Frame Assembly 7 12 - Schwinn 270 Journey 2.5 Recumbent Bike | Assembly and Owner's Manual - Page 13
6. Connect the Cables and Attach the Console Mast to Frame Assembly NOTICE: Do not crimp Console Cables. 16 14 X4 A 6mm J D 15 13 - Schwinn 270 Journey 2.5 Recumbent Bike | Assembly and Owner's Manual - Page 14
* * 7. Remove Hardware from Console NOTICE: Do not crimp the cable. Note: H ardware is pre-installed and not on the Hardware Card. * 1 X4 #2 8. Connect Cables and Attach Console to Frame Assembly NOTICE: Align the clips on the cable connectors and make sure the connectors lock. Do not - Schwinn 270 Journey 2.5 Recumbent Bike | Assembly and Owner's Manual - Page 15
9. Attach Pedals to Frame Assembly NOTICE: The Left Pedal is reverse-threaded. Be sure to attach Pedals on the proper side of the Bike. Orientation is based from a seated position on the bike. The Left Pedal has an "L", the Right Pedal an "R". 13 11 15 - Schwinn 270 Journey 2.5 Recumbent Bike | Assembly and Owner's Manual - Page 16
10. Attach Water Bottle Holder to Frame Assembly Note: H ardware is pre-installed and not on the Hardware Card. * #2 X2 2 F 16 - Schwinn 270 Journey 2.5 Recumbent Bike | Assembly and Owner's Manual - Page 17
all hardware is tight and components are properly assembled. Be sure to record the serial number in the field provided at the front of this manual. Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the Owner - Schwinn 270 Journey 2.5 Recumbent Bike | Assembly and Owner's Manual - Page 18
carefully lift the machine onto the transport rollers. 3. Push the machine into position. 4. Carefully lower the machine into position. NOTICE: B e careful when you move the bike. All abrupt motions can affect the computer operation. 18 - Schwinn 270 Journey 2.5 Recumbent Bike | Assembly and Owner's Manual - Page 19
from the machine. Injury to you or damage to the machine can occur. 3. Tighten the upper locking nut to lock the leveler. Make sure the bike is level and stable before you exercise. X2 19 - Schwinn 270 Journey 2.5 Recumbent Bike | Assembly and Owner's Manual - Page 20
loose parts or signs of wear. Do not use if found in this condition. Monitor the Seat, Pedals, and Crank Arms closely. Contact Nautilus® Customer Service • Do not over exert yourself during exercise. Operate the machine in the manner described in this manual. • Correctly adjust and safely engage all - Schwinn 270 Journey 2.5 Recumbent Bike | Assembly and Owner's Manual - Page 21
E Transport Handle F Stabilizer G Leveler H Handlebar, Side I Contact Heart Rate (CHR) Sensors J Power Connector K Transport Wheel L Fully Shrouded Flywheel M Pedal N Storage Bin O Seat Adjustment Handle P Handlebar, Upright Q Speakers R Fan S Media Tray T Telemetry Heart Rate (HR) Receiver 21 - Schwinn 270 Journey 2.5 Recumbent Bike | Assembly and Owner's Manual - Page 22
features the Schwinn Dual Track™ display with touch control buttons to navigate you through the exercise programs. Resistance Level Quick Buttons Fan 10 9 8 7 6 5 4 3 2 1 10% 40% 70% Hr 21 15 QUICK START PROGRAMS PAUSE/ END GOAL TRACK 25 18 9 5 LAST 30 DAYS LONGEST WORKOUT CALORIE RECORD OK - Schwinn 270 Journey 2.5 Recumbent Bike | Assembly and Owner's Manual - Page 23
result is reviewed, the achievement indicator light will activate. Schwinn Dual workout guide for a certain target zone (anaerobic, aerobic, or fat burn). Consult a physician before you start an exercise program. Stop exercising of goal (Distance, Time or Calories), the current value to achieve - Schwinn 270 Journey 2.5 Recumbent Bike | Assembly and Owner's Manual - Page 24
the machine. Note: If a Quick Start workout is performed for more than 99 minutes and 59 this manual. Level The LEVEL display shows the current resistance level in the workout. RPM Calories The Calories display field shows the estimated calories that you have burned during the exercise. 24 - Schwinn 270 Journey 2.5 Recumbent Bike | Assembly and Owner's Manual - Page 25
Monitoring your Heart Rate is one of the best procedures to control the intensity of your exercise. Contact Heart Rate (CHR) sensors are are the stainless steel parts of the Handlebars. To use, put your hands comfortably around the sensors. Be sure that your hands touch both the top and the bottom - Schwinn 270 Journey 2.5 Recumbent Bike | Assembly and Owner's Manual - Page 26
Calculations Your maximum heart rate usually decreases from 220 Beats Per Minute (BPM) in childhood to all exercises and fitness regimens, always use your best judgment when you increase your exercise time or intensity. Heart Rate BPM (beats per minute) 250 200 150 100 50 FAT-BURNING TARGET - Schwinn 270 Journey 2.5 Recumbent Bike | Assembly and Owner's Manual - Page 27
workouts in advance and try to follow the schedule. Seat Adjustment Correct seat placement encourages exercise efficiency seat toward the back. Step off the bike before you adjust the seat. 3. Push down on the Seat Adjustment Handle, and adjust the seat to the desired height. 4. Pull up the Seat - Schwinn 270 Journey 2.5 Recumbent Bike | Assembly and Owner's Manual - Page 28
level. The default Manual resistance level is 4. The time will count up from 00:00. Note: If a Manual workout is performed for more than 99 . The User profiles automatically record the workout results for each workout, and allow the workout data to be reviewed. The User profile stores the following - Schwinn 270 Journey 2.5 Recumbent Bike | Assembly and Owner's Manual - Page 29
by editing. Be sure to edit the User Profile for more accurate calorie and heart rate information. From the Power-Up Mode screen, push the to customize which Workout Values are displayed during a workout. The Lower Display will show all of the workout values, with the active Workout Value flashing. - Schwinn 270 Journey 2.5 Recumbent Bike | Assembly and Owner's Manual - Page 30
screen. Changing Resistance Levels Push the Resistance Level Increase() or Decrease() buttons to change the resistance level at any time in a workout program. To rapidly change the resistance level, push the desired Resistance Level Quick Button. The Console will adjust to the selected resistance - Schwinn 270 Journey 2.5 Recumbent Bike | Assembly and Owner's Manual - Page 31
Profile and Goal Program The Console lets you select the Profile Program and type of Goal for your workout (Distance, Time or Calories), and set the REVED : 122G61o2al value. REVED : 122612 1. Sit on the machine. 2. Push the Increase() or Decrease() buttons to select the correct User profile - Schwinn 270 Journey 2.5 Recumbent Bike | Assembly and Owner's Manual - Page 32
Program. The Console will show "STOP EXERCISING" and the goal will begin to count down. Stop exercising but continue to grip the contact heart rate and obtain the best result, in the Manual program so you can control the levels of resistance. Heart Rate Control (HRC) Workout Programs The Heart Rate - Schwinn 270 Journey 2.5 Recumbent Bike | Assembly and Owner's Manual - Page 33
physician before you start an exercise program. Stop exercising if you feel pain or WORKOUT PAUSED - PEDAL TO CONTINUE (if a bike) / STRIDE TO CONTINUE (if an elliptical) - PUSH END TO STOP During a paused workout, you can use the Increase/Decrease buttons to move through the result channels manually - Schwinn 270 Journey 2.5 Recumbent Bike | Assembly and Owner's Manual - Page 34
(and Achievements) The statistics from every workout are recorded to a User Profile. The Schwinn Dual Track™ Console shows the Goal Track workout Statistics on the Lower Display in three channels: a.) TIME (total), DISTANCE (total), and CALORIES (total) b.) SPEED (average), RPM (average), and - Schwinn 270 Journey 2.5 Recumbent Bike | Assembly and Owner's Manual - Page 35
have been reset. 10. Push GOAL TRACK to return to the Power-Up screen. When a User performs a workout that surpasses the "LONGEST WORKOUT" or "CALORIE RECORD" of the previous workouts, the Console will congratulate with an audible sound and tell the User the new achievement. The corresponding - Schwinn 270 Journey 2.5 Recumbent Bike | Assembly and Owner's Manual - Page 36
to either English or Metric, change the machine type, control the sound settings ( on/ off), or see maintenance statistics (Error Log and Run Hours - for service technician use only). 1. Hold down the PAUSE/END button and Right button together for 3 seconds while in the Power-Up Mode to go into the - Schwinn 270 Journey 2.5 Recumbent Bike | Assembly and Owner's Manual - Page 37
MAINTENANCE Read all maintenance instructions fully before you start any repair work. In some , examine the exercise machine for loose, broken, damaged, or worn parts. Do not use if found in this condition. Repair or replace all parts at the first sign of wear or damage. After each workout, use a - Schwinn 270 Journey 2.5 Recumbent Bike | Assembly and Owner's Manual - Page 38
Maintenance Parts A VN U T CC D AA BB Z F X Y G H W O M L P K B C E I J SRQ 38 - Schwinn 270 Journey 2.5 Recumbent Bike | Assembly and Owner's Manual - Page 39
D Water Bottle Holder E Handlebar, Side F Seat Bottom G Seat Adjustment Handle H Frame Assembly I Rear Stabilizer J Pedal, Left K Shroud, Left L Transport Wheel M Stabilizer, Front N Heart Rate Cable, Lower O Speed Sensor P Crank Arm Q Servo Motor R Brake - Schwinn 270 Journey 2.5 Recumbent Bike | Assembly and Owner's Manual - Page 40
Troubleshooting Condition/Problem No display/partial display/ unit will not turn on Things display and all connections are fine, replace the Console. If the above steps do not resolve the problem, contact Customer Care for further assistance. Be sure cable is connected securely to Console. Be sure - Schwinn 270 Journey 2.5 Recumbent Bike | Assembly and Owner's Manual - Page 41
will not turn on, but Console operates Unit rocks/does not sit level Seat Assembly shifts / squeaks when in use Pedals loose/unit difficult to pedal surfaces. Move machine to level area. Check hardware that attaches Seat assembly, and fully tighten hardware. Pedal should be tightened securely to - Schwinn 270 Journey 2.5 Recumbent Bike | Assembly and Owner's Manual - Page 42
(Assembly, Owner's Manuals, etc.). • Product must be used exclusively for the purpose intended. • Notify Nautilus within 30 days after detecting an issue with the Product. • Install replacement parts or components in accordance with any Nautilus instructions. • Perform diagnostic procedures with - Schwinn 270 Journey 2.5 Recumbent Bike | Assembly and Owner's Manual - Page 43
Canada. Terms • Frame 10 years • Mechanical parts 2 years • Electronics 1 year • Labor 3 months (Labor support does not include the installation of replacement parts involved in the initial product assembly and preventative maintenance services.) What You Must Do To arrange for - Schwinn 270 Journey 2.5 Recumbent Bike | Assembly and Owner's Manual - Page 44
Nautilus® 8002160.080113.B Bowflex® Schwinn® Fitness EN Universal®
ASSEMBLY MANUAL / OWNER’S MANUAL
Manual en Español Latino Americano:
270 /
2.5