Schwinn 270 Recumbent Bike 2017 model Assembly and Owner s Manual
Schwinn 270 Recumbent Bike 2017 model Manual
View all Schwinn 270 Recumbent Bike 2017 model manuals
Add to My Manuals
Save this manual to your list of manuals |
Schwinn 270 Recumbent Bike 2017 model manual content summary:
- Schwinn 270 Recumbent Bike 2017 model | Assembly and Owner s Manual - Page 1
270 Manual en Español Latino Americano: http://www.schwinnfitness.com ASSEMBLY MANUAL / OWNER'S MANUAL - Schwinn 270 Recumbent Bike 2017 model | Assembly and Owner s Manual - Page 2
Features 21 Console Service Mode 38 Console Features 22 Maintenance 39 Bluetooth® Connectivity 25 Maintenance Parts 40 Virtual Reality Experience on Troubleshooting 42 Your Fitness Machine 26 Warranty 45 Remote Heart Rate Monitor 27 To validate warranty support, keep the - Schwinn 270 Recumbent Bike 2017 model | Assembly and Owner s Manual - Page 3
not connect power supply to the machine until instructed to do so. • Do not assemble this Service for replacement labels. • Children must not be let on or near to this machine. Moving parts and other features of the machine can be dangerous to children. • Not intended for use by anyone under 13 years - Schwinn 270 Recumbent Bike 2017 model | Assembly and Owner s Manual - Page 4
stable before you step on them. Use caution when you step on and off the machine. • Disconnect all power before servicing this machine. • Do not operate this injury. • Prior to use, read and understand the owner's manual. The appliance is not to be used by persons with functional limitations - Schwinn 270 Recumbent Bike 2017 model | Assembly and Owner s Manual - Page 5
SERIAL NUMBER Serial Number Product specification WARNING! • Injury or death is possible if caution is not used while using this machine. • Keep children and pets away. • Read and follow all warnings on this machine. • Refer to the Owner's Manual for additional warnings and safety information - Schwinn 270 Recumbent Bike 2017 model | Assembly and Owner s Manual - Page 6
SPECIFICATIONS Maximum User Weight: 300 lbs. (136 kg) Power Requirements: Operational Voltage: machine: • Read and understand the "Important Safety Instructions" before assembly. • Collect all the pieces necessary for each assembly step. • Using the recommended wrenches, turn the bolts and nuts to - Schwinn 270 Recumbent Bike 2017 model | Assembly and Owner s Manual - Page 7
17 16 15 14 13 12 1 6 7 3 4 2 5 9 11 8 10 PARTS Item Qty Description 1 1 Console 2 1 Water Bottle Holder 3 1 Seat Back 4 1 Seat Cover 5 1 Seat Frame Assembly 6 1 Seat Bottom 7 1 Seat Adjustment Handle 8 1 Rear Stabilizer 9 1 Frame Item Qty Description 10 1 AC - Schwinn 270 Recumbent Bike 2017 model | Assembly and Owner s Manual - Page 8
HARDWARE / TOOLS A B C D E F G H I J Item Qty Description A 8 Button Head Hex Screw, M8x20 B 10 Button Head Hex Screw, M6x12 C 4 Flat Washer, M8 D 8 Lock Washer, M8 E 10 Flat Washer, M6 Item Qty Description F 2 Phillips Head Screw, M5x12 G 14 Lock Washer, M6 H 4 Curved - Schwinn 270 Recumbent Bike 2017 model | Assembly and Owner s Manual - Page 9
1. Attach Stabilizers to Frame Note: H ardware is pre-installed and not on the Hardware Card. * 6mm X2 * * * ASSEMBLY 6mm X2 * * * 8 9 12 9 - Schwinn 270 Recumbent Bike 2017 model | Assembly and Owner s Manual - Page 10
2. Attach the Seat Frame Assembly to the Seat Rail NOTICE: Do not crimp the Heart Rate Cable. Once all hardware has been inserted, be sure to fully tighten it. 6mm X4 A D C 5 X2 B GE 4mm 10 - Schwinn 270 Recumbent Bike 2017 model | Assembly and Owner s Manual - Page 11
3. Attach Seat Pads to Seat Frame Assembly 3 6 X8 E G B 4mm X4 H G I #2 11 - Schwinn 270 Recumbent Bike 2017 model | Assembly and Owner s Manual - Page 12
4. Attach Cover to Frame Assembly 4 12 - Schwinn 270 Recumbent Bike 2017 model | Assembly and Owner s Manual - Page 13
5. Attach Seat Adjustment Handle to Frame Assembly 7 13 - Schwinn 270 Recumbent Bike 2017 model | Assembly and Owner s Manual - Page 14
6. Connect the Cables and Attach the Console Mast to Frame Assembly NOTICE: Do not crimp Console Cables. 16 14 X4 A 6mm J D 15 14 - Schwinn 270 Recumbent Bike 2017 model | Assembly and Owner s Manual - Page 15
* * 7. Remove Hardware from Console NOTICE: Do not crimp the cable. Note: H ardware is pre-installed and not on the Hardware Card. * 1 X4 #2 8. Connect Cables and Attach Console to Frame Assembly NOTICE: Align the clips on the cable connectors and make sure the connectors lock. Do not - Schwinn 270 Recumbent Bike 2017 model | Assembly and Owner s Manual - Page 16
9. Attach Pedals to Frame Assembly NOTICE: T he Left Pedal is reverse-threaded. Be sure to attach Pedals on the proper side of the Bike. Orientation is based from a seated position on the bike. The Left Pedal has an "L", the Right Pedal an "R". 13 (R) 11 (L) 16 - Schwinn 270 Recumbent Bike 2017 model | Assembly and Owner s Manual - Page 17
10. Attach Water Bottle Holder to Frame Assembly #2 X2 2 F 17 - Schwinn 270 Recumbent Bike 2017 model | Assembly and Owner s Manual - Page 18
hardware is tight and components are properly assembled. Be sure to record the serial number in the field provided at the front of this manual. ! Do not use or put the machine into service until the machine has been fully assembled and inspected for correct performance in accordance with the Owner - Schwinn 270 Recumbent Bike 2017 model | Assembly and Owner s Manual - Page 19
capacities. Make sure that you and others are all physically fit and able to move the machine safely. 1. Remove the power cord. 2. Use the Transport Handle to carefully lift the machine onto the transport rollers. 3. Push the machine into position. 4. Carefully lower the machine into position - Schwinn 270 Recumbent Bike 2017 model | Assembly and Owner s Manual - Page 20
from the machine. Injury to you or damage to the machine can occur. 3. Tighten the upper locking nut to lock the leveler. Make sure the bike is level and stable before you exercise. X2 20 - Schwinn 270 Recumbent Bike 2017 model | Assembly and Owner s Manual - Page 21
Handle P Handlebar, Upright Q Speakers R Fan S Media Tray T Telemetry Heart Rate (HR) Receiver U Bluetooth® Connectivity (not shown) V Media Cable WARNING! Use the values calculated or measured by the machine's computer for reference purposes only. The heart rate displayed is an approximation and - Schwinn 270 Recumbent Bike 2017 model | Assembly and Owner s Manual - Page 22
The Console provides important information about your workout and lets you control the resistance levels while you exercise. The Console features the Schwinn Dual Track™ display with touch control buttons to navigate you through the exercise programs. Hr Resistance Level Quick Buttons Fan Upper - Schwinn 270 Recumbent Bike 2017 model | Assembly and Owner s Manual - Page 23
or a result is reviewed, the achievement indicator light will activate. Schwinn Dual Track™ Display Upper Display Data Program Display 10 9 8 7 falls into for the current User. These Heart Rate Zones can be used as a workout guide for a certain target zone (anaerobic, aerobic, or fat burn). - Schwinn 270 Recumbent Bike 2017 model | Assembly and Owner s Manual - Page 24
Imperial or metric, refer to the "Console Setup Mode" section in this manual. Level The LEVEL display shows the current resistance level in the workout. RPM your doctor before you use the machine again. The heart rate displayed is an approximation and should be used for reference only. Calories - Schwinn 270 Recumbent Bike 2017 model | Assembly and Owner s Manual - Page 25
connectivity and can wirelessly sync with the "Schwinn Trainer™" Fitness App on supported devices. The Software App syncs with your instructions. 4. To sync your workout data from your Schwinn Connect™ account with MyFitnessPal® or Under Armour® Connected Fitness, click on "Connected Services - Schwinn 270 Recumbent Bike 2017 model | Assembly and Owner s Manual - Page 26
This fitness machine is equipped to support a Virtual Reality (VR) experience on supported devices. Review, understand, and follow all warning instructions and the correct operation as supplied with your Virtual Reality equipment. No one under the age of 13 should use this exercise equipment or the - Schwinn 270 Recumbent Bike 2017 model | Assembly and Owner s Manual - Page 27
heart rate is usually linear, decreasing by approximately one BPM for each year. There is no indication that training influences the decrease in maximum more accurate to find this value by completing a stress test than by using an age related formula. Your at-rest heart rate is influenced by - Schwinn 270 Recumbent Bike 2017 model | Assembly and Owner s Manual - Page 28
rate may be higher or lower. Consult your physician for your individual target heart rate zone. Note: A s with all exercises and fitness regimens, always use your best judgment when you increase your exercise time or intensity. Heart Rate BPM (beats per minute) 250 200 150 100 50 FAT-BURNING - Schwinn 270 Recumbent Bike 2017 model | Assembly and Owner s Manual - Page 29
of breath, or feel faint. Contact your doctor before you use the machine again. Use the values calculated or measured by the machine's computer for leg is bent too much, move the seat toward the back. Step off the bike before you adjust the seat. 3. Push down on the Seat Adjustment Handle, and - Schwinn 270 Recumbent Bike 2017 model | Assembly and Owner s Manual - Page 30
segment is the currently active value (month / day / year). 2. Push OK to set. 3. Time: 3. Push the QUICK START button to start the Manual program. 4. To change the resistance level, push . User Profiles The Console lets you store and use 4 User profiles. The User profiles automatically record - Schwinn 270 Recumbent Bike 2017 model | Assembly and Owner s Manual - Page 31
segments. Push the OK button to accept the displayed User name. 5. To edit the other User data (EDIT AGE, EDIT WEIGHT, EDIT HEIGHT, EDIT GENDER), use the Increase/Decrease buttons to adjust, and push OK to set each entry. 6. The Console display shows the SCAN prompt. This option controls how the - Schwinn 270 Recumbent Bike 2017 model | Assembly and Owner s Manual - Page 32
9. The Console will go to the Power-Up Mode screen with the user selected. Reset a User Profile 1. From the Power-Up Mode screen, push the User Button to select one of the User Profiles. 2. Push the OK button to select the User Profile. 3. The Console display shows the current User Profile name - Schwinn 270 Recumbent Bike 2017 model | Assembly and Owner s Manual - Page 33
from the FEEDBACK category. The Fitness Test program first prompts you to select your fitness level-Beginner ( "BEG" ) or Advanced ( "ADV" ). The Console will use the Age and Weight values for the selected User Profile to calculate the Fitness Score. Start to workout and hold the Heart Rate Sensors - Schwinn 270 Recumbent Bike 2017 model | Assembly and Owner s Manual - Page 34
must grip the heart rate sensors for the duration of the test if not using a Remote Heart Rate Monitor. The display will continue to show "RELAX" This will be easier to achieve, and obtain the best result, in the Manual program so you can control the levels of resistance. Heart Rate Control (HRC) - Schwinn 270 Recumbent Bike 2017 model | Assembly and Owner s Manual - Page 35
change every 4 seconds: - WORKOUT PAUSED - PEDAL TO CONTINUE (if a bike) / STRIDE TO CONTINUE (if an elliptical) - PUSH END TO STOP During a paused workout, you can use the Increase/Decrease buttons to move through the result channels manually. 1. Stop pedaling and push the PAUSE/END button to pause - Schwinn 270 Recumbent Bike 2017 model | Assembly and Owner s Manual - Page 36
or Right() buttons to move through the result channels manually. During the Cool Down period, the Resistance Level recorded to a User Profile. The Schwinn Dual Track™ Console shows the Goal Track seven days, along with the workout value totals. Use the Left() or Right() buttons to move through - Schwinn 270 Recumbent Bike 2017 model | Assembly and Owner s Manual - Page 37
others who have lost muscle mass. Contact your doctor for more information about Body Mass Index (BMI) and the weight that is appropriate for you. Use the values calculated or measured by the machine's computer for reference purposes only. 8. Push the Increase() button to move to the "SAVE TO USB - Schwinn 270 Recumbent Bike 2017 model | Assembly and Owner s Manual - Page 38
on/ off), or see maintenance statistics (Error Log and Run Hours - for service technician use only). 1. Hold down the PAUSE/END button and Right button together for to change which segment is the currently active value (month / day / year). 3. Push OK to set. 4. The Console display shows the Time - Schwinn 270 Recumbent Bike 2017 model | Assembly and Owner s Manual - Page 39
MAINTENANCE Read all maintenance instructions fully before you start any repair work. In unreadable or dislodged, contact Nautilus Customer Service for replacement labels. Disconnect all power to the machine before you service it. Daily: Before each use, examine the exercise machine for loose, - Schwinn 270 Recumbent Bike 2017 model | Assembly and Owner s Manual - Page 40
Maintenance Parts A AA BB X A CC AA BB Z Y G VN U T W P M O L S B C D E F H I K J RQ 40 - Schwinn 270 Recumbent Bike 2017 model | Assembly and Owner s Manual - Page 41
A Console B Seat Back C Seat Cover D Water Bottle Holder E Handlebar, Side F Seat Bottom G Seat Adjustment Handle H Frame Assembly I Rear Stabilizer J Pedal, Left K Shroud, Left L Transport Wheel M Stabilizer, Front N Heart Rate Cable, Lower O Speed Sensor P Crank Arm Q Servo Motor R Brake Assembly - Schwinn 270 Recumbent Bike 2017 model | Assembly and Owner s Manual - Page 42
TROUBLESHOOTING Condition/Problem No display/partial display/ unit will not turn on Unit display and all connections are fine, replace the Console. If the above steps do not resolve the problem, contact Customer Care for further assistance. Be sure cable is connected securely to Console. Be sure - Schwinn 270 Recumbent Bike 2017 model | Assembly and Owner s Manual - Page 43
Condition/Problem No speed/RPM reading, Console displays "Please Pedal" error code Resistance does not change (machine turns on and operates) Console shuts off (enters sleep mode) while in use Fan will not turn on or will not turn off Fan will not turn on, but Console operates Things to Check Check - Schwinn 270 Recumbent Bike 2017 model | Assembly and Owner s Manual - Page 44
Condition/Problem Unit rocks/does not sit level Pedals loose/unit difficult to pedal Clicking sound when pedaling Seat Assembly shifts / squeaks when in use Things to Check Solution Check leveler adjustment Adjust levelers until machine is level. Check surface under unit Check pedal to crank - Schwinn 270 Recumbent Bike 2017 model | Assembly and Owner s Manual - Page 45
used in the United States or Canada. Terms • Frame 10 years • Mechanical parts 2 years • Electronics 1 year • Labor 90 days (Labor support service instructions, maintenance instructions, or safety warnings as stated in the Product Documentation (Assembly, Owner's Manuals specific - Schwinn 270 Recumbent Bike 2017 model | Assembly and Owner s Manual - Page 46
Nautilus® 8011519.030117.B Bowflex® Schwinn® Fitness EN Universal®
ASSEMBLY MANUAL / OWNER’S MANUAL
Manual en Español Latino Americano:
http://www.schwinnfitness.com
270