Seagate ES.2 Barracuda ES.2 SATA Product Manual

Seagate ES.2 - Barracuda Enterprise 750GB SATA/300 7200RPM 32MB Hard Drive Manual

Get Seagate ES.2 - Barracuda Enterprise 750GB SATA/300 7200RPM 32MB Hard Drive PDF manuals and user guides
UPC - 683728175870
View all Seagate ES.2 manuals
Add to My Manuals
Save this manual to your list of manuals

Seagate ES.2 manual content summary:

  • Seagate ES.2 | Barracuda ES.2 SATA Product Manual - Page 1
    Product Manual Barracuda ES.2 Serial ATA ST31000340NS ST3750330NS ST3500320NS ST3250310NS 100468393 Rev. H September 2009
  • Seagate ES.2 | Barracuda ES.2 SATA Product Manual - Page 2
    Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Barracuda, owners. When referring to hard drive capacity, one gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one trillion bytes.
  • Seagate ES.2 | Barracuda ES.2 SATA Product Manual - Page 3
    compatibility 23 4.2 Serial ATA device plug connector pin definitions 24 4.3 Supported ATA commands 25 4.3.1 Identify Device command 27 4.3.2 Set Features command 31 4.3.3 S.M.A.R.T. commands 32 5.0 Seagate Technology support services 33 Barracuda ES.2 Serial ATA Product Manual, Rev. H i
  • Seagate ES.2 | Barracuda ES.2 SATA Product Manual - Page 4
    ii Barracuda ES.2 Serial ATA Product Manual, Rev. H
  • Seagate ES.2 | Barracuda ES.2 SATA Product Manual - Page 5
    2. Figure 3. Figure 4. Figure 5. Typical 5V startup and operation current profile 11 Typical 12V startup and operation current profile 11 Serial ATA connectors 20 Attaching SATA cabling 20 Mounting dimensions-top, side and end view 21 Barracuda ES.2 Serial ATA Product Manual, Rev. H iii
  • Seagate ES.2 | Barracuda ES.2 SATA Product Manual - Page 6
  • Seagate ES.2 | Barracuda ES.2 SATA Product Manual - Page 7
    1.0 Introduction This manual describes the functional, mechanical and interface specifications for the following Seagate Barracuda® ES.2 Serial ATA model drives: ST31000340NS ST3750330NS ST3500320NS ST3250310NS These drives provide the following key features: • 7,200 RPM spindle speed. • High
  • Seagate ES.2 | Barracuda ES.2 SATA Product Manual - Page 8
    ATA easy by providing legacy software support. Serial ATA was designed to allow you to install a Serial ATA host adapter and Serial ATA disc drive in your current system and expect all The specification can be downloaded from www.serialata.org. 2 Barracuda ES.2 Serial ATA Product Manual, Rev. H
  • Seagate ES.2 | Barracuda ES.2 SATA Product Manual - Page 9
    drive models: ST31000340NS ST3750330NS ST3500320NS ST3250310NS 2.1 Specification summary tables The specifications listed in the following tables are for quick reference. For details on specification measurement or definition, see the appropriate section of this manual. Barracuda ES
  • Seagate ES.2 | Barracuda ES.2 SATA Product Manual - Page 10
    1000 GB (1 Tbyte) and 750 GB models Drive specification Formatted Gbytes Mbytes/sec max) ATA data-transfer modes supported Cache buffer Height (mm max) Width ( Shock (max at 2 msec) ST31000340NS ST3750330NS 1000 750 1,953,525,168 1,465, Barracuda ES.2 Serial ATA Product Manual, Rev. H
  • Seagate ES.2 | Barracuda ES.2 SATA Product Manual - Page 11
    : www.seagate.com/support/service/ From this page, click on the "Verify Your Warranty" link. You will be asked to provide the drive serial number, model number (or part number) and country of purchase. The system will display the warranty information for your drive. 50,000 Yes *One Gbyte equals one
  • Seagate ES.2 | Barracuda ES.2 SATA Product Manual - Page 12
    GB and 250 GB models Drive specification Formatted Gbytes rate (Mbytes/sec max) ATA data-transfer modes supported Cache buffer Height (mm max) Width (mm -Operational Shock (max at 2 msec) ST3500320NS ST3250310NS 500 250 976,773,168 488,397,168 4 Barracuda ES.2 Serial ATA Product Manual, Rev. H
  • Seagate ES.2 | Barracuda ES.2 SATA Product Manual - Page 13
    : www.seagate.com/support/service/ From this page, click on the "Verify Your Warranty" link. You will be asked to provide the drive serial number, model number (or part number) and country of purchase. The system will display the warranty information for your drive. 50,000 Yes *One Gbyte equals one
  • Seagate ES.2 | Barracuda ES.2 SATA Product Manual - Page 14
    capacity Model ST31000340NS ST3750330NS ST3500320NS ST3250310NS Formatted capacity* 1000 Gbytes 750 Gbytes 500 Gbytes 250 Gbytes Guaranteed sectors 1,953,525,168 1,465,149,168 976,773,168 488,397,168 Bytes per sector 512 *One Gbyte equals one billion bytes when referring to hard drive capacity
  • Seagate ES.2 | Barracuda ES.2 SATA Product Manual - Page 15
    nominal power at 25°C ambient temperature. All times are measured using drive diagnostics. The specifications in the table below are defined as follows: (sec) ST31000340NS 20 (max) 10 (max) 20 (max) ST3750330NS 9 (max) ST3500320NS, ST3250310NS 8 (max) Barracuda ES.2 Serial ATA Product Manual, Rev
  • Seagate ES.2 | Barracuda ES.2 SATA Product Manual - Page 16
    ) 10.42 0.500 0.660 Standby 0.99 0.150 0.020 Sleep 0.99 0.150 0.020 *During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels. 10 Barracuda ES.2 Serial ATA Product Manual, Rev. H
  • Seagate ES.2 | Barracuda ES.2 SATA Product Manual - Page 17
    2.8.1.1 Typical current profiles Figure 1. Typical 5V startup and operation current profile Figure 2. Typical 12V startup and operation current profile Barracuda ES.2 Serial ATA Product Manual, Rev. H 11
  • Seagate ES.2 | Barracuda ES.2 SATA Product Manual - Page 18
    zero. If the standby timer reaches zero before any drive activity is required, the drive makes a transition to Standby mode. In both Idle and Standby mode, the drive accepts all commands and returns to Active mode when disc access is necessary. 12 Barracuda ES.2 Serial ATA Product Manual, Rev. H
  • Seagate ES.2 | Barracuda ES.2 SATA Product Manual - Page 19
    shock The nonoperating shock level that the drive can experience without incurring physical damage or degradation in performance when subsequently put into operation is 300 Gs based on a nonrepetitive half-sine shock pulse of 2 msec duration. Barracuda ES.2 Serial ATA Product Manual, Rev. H 13
  • Seagate ES.2 | Barracuda ES.2 SATA Product Manual - Page 20
    vibration levels that the drive may experience without incurring physical damage or degradation in performance when subsequently put into operation are specified below. 5-22 Hz 22-350 Hz 350-500 Hz 2.0 Gs (limited displacement) 5.0 Gs 2.0 Gs 14 Barracuda ES.2 Serial ATA Product Manual, Rev. H
  • Seagate ES.2 | Barracuda ES.2 SATA Product Manual - Page 21
    , the drive is placed in seek mode only. The number of seeks per second is defined by the following equation: (Number of seeks per second = 0.4 / (average latency + average access time) Table 4: Fluid Dynamic Bearing (FDB) motor acoustics ST31000340NS ST3750330NS ST3500320NS ST3250310NS Active
  • Seagate ES.2 | Barracuda ES.2 SATA Product Manual - Page 22
    on-hours per year. • 250 average motor start/stop cycles for a specific drive, use a web browser to access the following web page: www.seagate.com/support/service/ From this . 2.13.2 Electromagnetic compatibility Hard drives that display the CE mark Barracuda ES.2 Serial ATA Product Manual, Rev. H
  • Seagate ES.2 | Barracuda ES.2 SATA Product Manual - Page 23
    (EMI/EMS) for Class B products. Drives are tested in a representative, end-user system by a Korean-recognized lab. • Barracuda ES.2 • Certificate number: 1 TB750 GB500 GB250 GB- STX- ST31000340NS (B) STX- ST31000340NS (B) STX- ST3500320NS (B) STX- ST3500320NS (B) Australian C-Tick (N176) If
  • Seagate ES.2 | Barracuda ES.2 SATA Product Manual - Page 24
    the China RoHS MCV Standard. X RoHS MCV 2.15 Corrosive environment Seagate electronic drive components pass accelerated corrosion testing equivalent to 10 years exposure to replacing materials near circuitry with sulfide-free alternatives. 18 Barracuda ES.2 Serial ATA Product Manual, Rev. H
  • Seagate ES.2 | Barracuda ES.2 SATA Product Manual - Page 25
    the factory-installed labels from the drive or cover them with additional labels. Removal voids the warranty. Some factory-installed labels contain information needed to service the drive. Other labels are used to seal out dirt and contamination. Barracuda ES.2 Serial ATA Product Manual, Rev. H 19
  • Seagate ES.2 | Barracuda ES.2 SATA Product Manual - Page 26
    the drive as illustrated in Figure 4. Signal connector Power connector Signal cable Power cable Figure 4. Attaching SATA cabling Each cable is keyed to ensure correct orientation. Barracuda ES.2 Serial ATA drives support latching SATA connectors. 20 Barracuda ES.2 Serial ATA Product Manual, Rev
  • Seagate ES.2 | Barracuda ES.2 SATA Product Manual - Page 27
    in the bottom-mounting holes. See Figure 5 for drive mounting dimensions. Follow these important mounting precautions when mounting the drive: • Allow a minimum clearance of 0.030 inches -lb). Figure 5. Mounting dimensions-top, side and end view Barracuda ES.2 Serial ATA Product Manual, Rev. H 21
  • Seagate ES.2 | Barracuda ES.2 SATA Product Manual - Page 28
    22 Barracuda ES.2 Serial ATA Product Manual, Rev. H
  • Seagate ES.2 | Barracuda ES.2 SATA Product Manual - Page 29
    can be downloaded from www.serialata.org. Caution: The drive motor must come to a complete stop (Ready to spindle stop time indicated in Section 2.7) prior to changing the plane of operation. This time is required to insure data integrity. Barracuda ES.2 Serial ATA Product Manual, Rev. H 23
  • Seagate ES.2 | Barracuda ES.2 SATA Product Manual - Page 30
    pre-charge, 2nd mate 5V power 5V power 2nd mate P11 Ground or LED signal If grounded, drive does not use deferred spin P12 Ground 1st mate. P13 V12 P14 V12 P15 V12 12V power, configuration. 4. All used voltage pins (Vx) must be terminated. 24 Barracuda ES.2 Serial ATA Product Manual, Rev. H
  • Seagate ES.2 | Barracuda ES.2 SATA Product Manual - Page 31
    ATA commands The following table lists Serial ATA standard commands that the drive supports. For a detailed description of the ATA commands, refer to the Serial ATA: High Speed Serialized 2FH C4H 29H F8H 27H 20H 24H 21H 40H 42H 41H 10H F6H F3H Barracuda ES.2 Serial ATA Product Manual, Rev. H 25
  • Seagate ES.2 | Barracuda ES.2 SATA Product Manual - Page 32
    B0H / D0H B0H / D5H B0H / DAH B0H / D3H B0H / D6H E2H E0H E8H CAH 35H 3DH CBH 3FH C5H 39H CEH 30H 31H 34H 26 Barracuda ES.2 Serial ATA Product Manual, Rev. H
  • Seagate ES.2 | Barracuda ES.2 SATA Product Manual - Page 33
    ASCII characters, 0000H = none) Retired Retired Obsolete Firmware revision (8 ASCII character string, padded with blanks to end of string) Drive model number: (40 ASCII characters, padded with blanks 0200H 0007H xxxxH xxxxH xxxxH xxxxH xxxxH Barracuda ES.2 Serial ATA Product Manual, Rev. H 27
  • Seagate ES.2 | Barracuda ES.2 SATA Product Manual - Page 34
    7C03H 4003H See Word 108-111 note. (4003H = 0100000000000011 binary) 30xxH 0001H 4000H xx3FH 0000H 0000H FFFEH xxxxH 0000H 1000 GB models = 1,953,525,168 750 GB models = 1,465,149,168 500 GB models = 976,773,168 250 GB models = 488,397,168 0000H 28 Barracuda ES.2 Serial ATA Product Manual, Rev. H
  • Seagate ES.2 | Barracuda ES.2 SATA Product Manual - Page 35
    7 WRITE DMA QUEUED FUA EXT command is supported. 8 64-bit World Wide Name is supported. 9-10 Obsolete. 11-12 Reserved for TLC. 13 IDLE IMMEDIATE command with IUNLOAD faeture is supported. 14 Shall be set to 1. 15 Shall be cleared to 0. Barracuda ES.2 Serial ATA Product Manual, Rev. H 29
  • Seagate ES.2 | Barracuda ES.2 SATA Product Manual - Page 36
    supported. 1 Ultra DMA mode 1 is supported. 2 Ultra DMA mode 2 is supported. 3 Ultra DMA mode 3 is supported. 4 Ultra DMA mode 4 is supported. 5 Ultra DMA mode 5 is supported. 6 Ultra DMA mode 6 is supported mode 6 is currently active. 30 Barracuda ES.2 Serial ATA Product Manual, Rev. H
  • Seagate ES.2 | Barracuda ES.2 SATA Product Manual - Page 37
    that the drive supports, the SATA features AAH Enable read look-ahead (read cache) feature (default). F1H Report full capacity available Note. At power-on, or after a hardware or software reset, the default values of the features are as indicated above. Barracuda ES.2 Serial ATA Product Manual
  • Seagate ES.2 | Barracuda ES.2 SATA Product Manual - Page 38
    new drives and is also available at: http://seatools.seagate.com. This drive is shipped with S.M.A.R.T. features disabled. You must have a recent BIOS or software package that supports S.M.A.R.T. and 0x04 (abort) is written to the Error register. 32 Barracuda ES.2 Serial ATA Product Manual, Rev. H
  • Seagate ES.2 | Barracuda ES.2 SATA Product Manual - Page 39
    Support: [email protected] Technical Support: [email protected] Warranty Support: http://www.seagate.com/support/service/index.html mySeagate my.seagate technical support specialist during normal business hours for the call center in your region. Barracuda ES.2 Serial ATA Product Manual,
  • Seagate ES.2 | Barracuda ES.2 SATA Product Manual - Page 40
    Africa, go to the "Contact Us" page on www.seagate.com. Asia/Pacific Support Services For an extensive list of telephone numbers to technical support, presales and warranty service in Asia/Pacific, go to the "Contact Us" page on www.seagate.com. 34 Barracuda ES.2 Serial ATA Product Manual, Rev. H
  • Seagate ES.2 | Barracuda ES.2 SATA Product Manual - Page 41
    B computing device 17 compatibility 16 Conducted noise 12 Conducted RF immunity 15 Configuring the drive 19 connectors 20 Corrosive environment 18 CSA C22.2 (950) 16 cycles 16 Cylinders 8 H Handling precautions 19 heads 8 height 9 humidity 13 Barracuda ES.2 Serial ATA Product Manual, Rev. H 35
  • Seagate ES.2 | Barracuda ES.2 SATA Product Manual - Page 42
    16 master/slave 2 maximum temperature 13 MIC 17 mounting 21 mounting screws 13 mounting the drive 19 N noise 12 nominal power 9 Nonoperating shock 13 Nonoperating vibration 14 Nonrecoverable read errors 15 RMS read/write current 12 RoHS 18 RRL 17 36 Barracuda ES.2 Serial ATA Product Manual, Rev. H
  • Seagate ES.2 | Barracuda ES.2 SATA Product Manual - Page 43
    mode power 10 Seek time 9 Seeking 10 Serial ATA (SATA) interface 23 serial ATA ports 2 Servo electronics 10 stop cycles 16 static-discharge 19 support services 33 Surge immunity 15 T technical support services 33 temperature 9, 13 temperature Barracuda ES.2 Serial ATA Product Manual, Rev. H 37
  • Seagate ES.2 | Barracuda ES.2 SATA Product Manual - Page 44
    38 Barracuda ES.2 Serial ATA Product Manual, Rev. H
  • Seagate ES.2 | Barracuda ES.2 SATA Product Manual - Page 45
  • Seagate ES.2 | Barracuda ES.2 SATA Product Manual - Page 46
    Seagate Technology LLC 920 Disc Drive, Scotts Valley, California 95066-4544, USA Publication Number: 100468393, Rev. H, Printed in U.S.A.
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
Product Manual
Barracuda ES.2 Serial ATA
100468393
Rev. H
September 2009
ST31000340NS
ST3750330NS
ST3500320NS
ST3250310NS