Seagate ST31000322CS Pipeline HD Series SATA Product Manual
Seagate ST31000322CS - Pipeline HD 1 TB Hard Drive Manual
UPC - 715663214335
View all Seagate ST31000322CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Seagate ST31000322CS manual content summary:
- Seagate ST31000322CS | Pipeline HD Series SATA Product Manual - Page 1
Product Manual Pipeline HD Series SATA ST3500321CS ST3500422CS ST3320310CS ST3320410CS ST3160310CS 100504234 Rev. C October 2008 - Seagate ST31000322CS | Pipeline HD Series SATA Product Manual - Page 2
reserved. Printed in U.S.A. Publication number: 100504234, Rev. C October 2008 Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Pipeline HD Series, SeaTools and SeaTDD are either trademarks or registered - Seagate ST31000322CS | Pipeline HD Series SATA Product Manual - Page 3
Plug compatibility 23 4.2 Serial ATA device plug connector pin definitions 24 4.3 Supported ATA commands 25 4.3.1 Identify Device command 27 4.3.2 Set Features command 31 4.3.3 S.M.A.R.T. commands 32 5.0 Seagate Technology support services 33 Pipeline HD Series SATA Product Manual, Rev. C i - Seagate ST31000322CS | Pipeline HD Series SATA Product Manual - Page 4
ii Pipeline HD Series SATA Product Manual, Rev. C - Seagate ST31000322CS | Pipeline HD Series SATA Product Manual - Page 5
11 Serial ATA connectors 20 Attaching SATA cabling 20 Mounting dimensions (for 500 GB models 21 Mounting dimensions (for 320 and 160 GB models 22 Pipeline HD Series SATA Product Manual, Rev. C iii - Seagate ST31000322CS | Pipeline HD Series SATA Product Manual - Page 6
- Seagate ST31000322CS | Pipeline HD Series SATA Product Manual - Page 7
software performs a drive self-test that eliminates unnecessary drive returns. • Support for S.M.A.R.T. drive monitoring and reporting. • Supports latching SATA cables and connectors. • Worldwide Name (WWN) capability uniquely identifies the drive. Pipeline HD Series SATA Product Manual, Rev. C 1 - Seagate ST31000322CS | Pipeline HD Series SATA Product Manual - Page 8
In addition, Serial ATA makes the transition from parallel ATA easy by providing legacy software support. Serial ATA was designed to allow you to install a Serial ATA host adapter and Serial The specification can be downloaded from www.sata-io.org. 2 Pipeline HD Series SATA Product Manual, Rev. C - Seagate ST31000322CS | Pipeline HD Series SATA Product Manual - Page 9
convenience, the phrases the drive and this drive are used throughout this manual to indicate the following drive model: ST3500321CS ST3500422CS ST3320310CS ST3320410CS ST3160310CS or definition, see the appropriate section of this manual. Pipeline HD Series SATA Product Manual, Rev. C 3 - Seagate ST31000322CS | Pipeline HD Series SATA Product Manual - Page 10
data transfer rate Sustained data transfer rate I/O data-transfer rate ATA data-transfer modes supported Cache buffer Height (max) Width (max) Length (max) Weight (typical) Avg. (-200 ft. to 40,000+ ft.) 70 Gs at 2 msec max ST3500321CS 8 Mbytes 4 Pipeline HD Series SATA Product Manual, Rev. C - Seagate ST31000322CS | Pipeline HD Series SATA Product Manual - Page 11
the warranty for a specific drive, use a web browser to access the following web page: support.seagate.com/customer/warranty_validation.jsp From this page, click on the "Verify Your Warranty" link. You acoustic and power to operational levels. Pipeline HD Series SATA Product Manual, Rev. C 5 - Seagate ST31000322CS | Pipeline HD Series SATA Product Manual - Page 12
data transfer rate Sustained data transfer rate I/O data-transfer rate ATA data-transfer modes supported Cache buffer Height (max) Width (max) Length (max) Weight (typical) Avg. ft.) 70 Gs at 2 msec max ST3160310CS 160 Gbytes 312,581,808 1 1 6 Pipeline HD Series SATA Product Manual, Rev. C - Seagate ST31000322CS | Pipeline HD Series SATA Product Manual - Page 13
the warranty for a specific drive, use a web browser to access the following web page: support.seagate.com/customer/warranty_validation.jsp From this page, click on the "Verify Your Warranty" link. You acoustic and power to operational levels. Pipeline HD Series SATA Product Manual, Rev. C 7 - Seagate ST31000322CS | Pipeline HD Series SATA Product Manual - Page 14
Device command" (words 60-61 and 100-103) for additional information about 48bit addressing support of drives with capacities over 137 Gbytes. 2.3 Default logical geometry Cylinders 16,383 Read/write in max 215 Gbits/in2 avg 1,201 Mbits/sec max 8 Pipeline HD Series SATA Product Manual, Rev. C - Seagate ST31000322CS | Pipeline HD Series SATA Product Manual - Page 15
mode. Note. These drives are designed to consistently meet the seek times represented in this manual. Physical seeks, regardless of mode (such as track-to-track and average), are expected ) - Seagate ST31000322CS | Pipeline HD Series SATA Product Manual - Page 16
0.014 *During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels. 10 Pipeline HD Series SATA Product Manual, Rev. C - Seagate ST31000322CS | Pipeline HD Series SATA Product Manual - Page 17
. Equivalent resistance is calculated by dividing the nominal voltage by the typical RMS read/write current. 2.8.3 Voltage tolerance Voltage tolerance (including noise): 5V ± 5% 12V ± 10% Pipeline HD Series SATA Product Manual, Rev. C 11 - Seagate ST31000322CS | Pipeline HD Series SATA Product Manual - Page 18
to Standby mode. In both Idle and Standby mode, the drive accepts all commands and returns to Active mode when disk access is necessary. 12 Pipeline HD Series SATA Product Manual, Rev. C - Seagate ST31000322CS | Pipeline HD Series SATA Product Manual - Page 19
°F max) 2.9.4 Altitude Operating: Nonoperating: -60.96 m to 3,048 m (-200 ft. to 10,000+ ft.) -60.96 m to 12,192 m (-200 ft. to 40,000+ ft.) Pipeline HD Series SATA Product Manual, Rev. C 13 - Seagate ST31000322CS | Pipeline HD Series SATA Product Manual - Page 20
experience without incurring physical damage or degradation in performance when subsequently put into operation are specified below. 5-350 Hz 350-500 Hz 5.0 Gs 1.0 Gs 14 Pipeline HD Series SATA Product Manual, Rev. C - Seagate ST31000322CS | Pipeline HD Series SATA Product Manual - Page 21
is the use of the absolute threshold of hearing. Seagate uses the lower limit for the threshold curve* to Test Electrostatic discharge Radiated RF immunity Electrical fast transient Surge immunity Conducted RF immunity Voltage dips, interrupts 94 Pipeline HD Series SATA Product Manual, Rev. C 15 - Seagate ST31000322CS | Pipeline HD Series SATA Product Manual - Page 22
the warranty for a specific drive, use a web browser to access the following web page: support.seagate.com/customer/warranty_validation.jsp From this page, click on the "Verify Your Warranty" link. You and provide CE marking for their products. 16 Pipeline HD Series SATA Product Manual, Rev. C - Seagate ST31000322CS | Pipeline HD Series SATA Product Manual - Page 23
device is required. Seagate has tested this device manufacturer's instructions, may Problems. This booklet is available from the Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402. Refer to publication number 004-000-00345-4. Pipeline HD Series SATA Product Manual - Seagate ST31000322CS | Pipeline HD Series SATA Product Manual - Page 24
by the installation environment. The silver, copper, nickel and gold films used in Seagate products are especially sensitive to the presence of sulfide, chloride, and nitrate contaminants. materials near circuitry with sulfide-free alternatives. 18 Pipeline HD Series SATA Product Manual, Rev. C - Seagate ST31000322CS | Pipeline HD Series SATA Product Manual - Page 25
mounting the drive This section contains the specifications and instructions for configuring and mounting the drive. 3.1 Handling labels contain information needed to service the drive. Other labels are used to seal out dirt and contamination. Pipeline HD Series SATA Product Manual, Rev. C 19 - Seagate ST31000322CS | Pipeline HD Series SATA Product Manual - Page 26
drive as illustrated in Figure 3. Signal connector Power connector Signal cable Power cable Figure 3. Attaching SATA cabling Each cable is keyed to ensure correct orientation. Pipeline HD Series SATA drives support latching SATA connectors. 20 Pipeline HD Series SATA Product Manual, Rev. C - Seagate ST31000322CS | Pipeline HD Series SATA Product Manual - Page 27
side mounting holes. • Do not overtighten the mounting screws (maximum torque: 6 inch-lb). Recommended case temperature measurement location Figure 4. Mounting dimensions (for 500 GB models) Pipeline HD Series SATA Product Manual, Rev. C 21 - Seagate ST31000322CS | Pipeline HD Series SATA Product Manual - Page 28
Recommended case temperature measurement location Figure 5. Mounting dimensions (for 320 and 160 GB models) 22 Pipeline HD Series SATA Product Manual, Rev. C - Seagate ST31000322CS | Pipeline HD Series SATA Product Manual - Page 29
supports FIS data transfers. It supports Pipeline HD Series SATA drives incorporate connectors which enable you to hot plug these drives in accordance with the Serial ATA Revision 2.5 specification. This specification can be downloaded from www.serialata.org. Pipeline HD Series SATA Product Manual - Seagate ST31000322CS | Pipeline HD Series SATA Product Manual - Page 30
pin from each voltage is used for pre-charge when installed in a blind-mate backplane configuration. 4. All used voltage pins (Vx) must be terminated. 24 Pipeline HD Series SATA Product Manual, Rev. C - Seagate ST31000322CS | Pipeline HD Series SATA Product Manual - Page 31
page 32.for details and subcommands used in the S.M.A.R.T. implementation. Table 7: Supported ATA commands Command name Check Power Mode Device Configuration Freeze Lock Device Configuration Identify F8H 27H 20H 24H 21H 40H 42H 41H 10H F6H F3H Pipeline HD Series SATA Product Manual, Rev. C 25 - Seagate ST31000322CS | Pipeline HD Series SATA Product Manual - Page 32
B0H / D0H B0H / D5H B0H / DAH B0H / D3H B0H / D6H E2H E0H E8H CAH 35H CDH CBH 3FH C5H 39H CEH 30H 31H 34H 26 Pipeline HD Series SATA Product Manual, Rev. C - Seagate ST31000322CS | Pipeline HD Series SATA Product Manual - Page 33
sectors per interrupt on Read multiple and Write multiple (16) Reserved Standard Standby timer, IORDY supported and may be disabled ATA-reserved PIO data-transfer cycle timing mode Retired Words 54-58, 64 0200H 0007H xxxxH xxxxH xxxxH xxxxH xxxxH Pipeline HD Series SATA Product Manual, Rev. C 27 - Seagate ST31000322CS | Pipeline HD Series SATA Product Manual - Page 34
93 95-99 Command sets enabled Command sets enabled Command sets enable extension Ultra DMA support and current mode (see note following this table) Security erase time Enhanced security erase = 625,142,448 ST3160310CS= 312,581,808 0000H 28 Pipeline HD Series SATA Product Manual, Rev. C - Seagate ST31000322CS | Pipeline HD Series SATA Product Manual - Page 35
supported. 7 WRITE DMA QUEUED FUA EXT command is supported. 8 64-bit World Wide Name is supported. 9-10 Obsolete. 11-12 Reserved for TLC. 13 IDLE IMMEDIATE command with IUNLOAD faeture is supported. 14 Shall be set to 1. 15 Shall be cleared to 0. Pipeline HD Series SATA Product Manual - Seagate ST31000322CS | Pipeline HD Series SATA Product Manual - Page 36
supported. 1 Ultra DMA mode 1 is supported. 2 Ultra DMA mode 2 is supported. 3 Ultra DMA mode 3 is supported. 4 Ultra DMA mode 4 is supported. 5 Ultra DMA mode 5 is supported. 6 Ultra DMA mode 6 is supported mode 6 is currently active. 30 Pipeline HD Series SATA Product Manual, Rev. C - Seagate ST31000322CS | Pipeline HD Series SATA Product Manual - Page 37
an interrupt. If the value in the register does not represent a feature that the drive supports, the command is aborted. Power-on default has the read look-ahead and write caching features , the default values of the features are as indicated above. Pipeline HD Series SATA Product Manual, Rev. C 31 - Seagate ST31000322CS | Pipeline HD Series SATA Product Manual - Page 38
also available at: http://seatools.seagate.com. This drive is shipped with S.M.A.R.T. features disabled. You must have a recent BIOS or software package that supports S.M.A.R.T. to enable this feature 0x04 (abort) is written to the Error register. 32 Pipeline HD Series SATA Product Manual, Rev. C - Seagate ST31000322CS | Pipeline HD Series SATA Product Manual - Page 39
and compatibility. Technical Support Seagate technical support is available to assist you online at support.seagate.com or through one of our call centers. Have your system configuration information and your "ST" model/product number available. Pipeline HD Series SATA Product Manual, Rev. C 33 - Seagate ST31000322CS | Pipeline HD Series SATA Product Manual - Page 40
Africa, go to the "Contact Us" page on www.seagate.com. Asia/Pacific Support Services For an extensive list of telephone numbers to technical support, presales and warranty service in Asia/Pacific, go to the "Contact Us" page on www.seagate.com. 34 Pipeline HD Series SATA Product Manual, Rev. C - Seagate ST31000322CS | Pipeline HD Series SATA Product Manual - Page 41
mark 16 certification 16 Check Power Mode 25 compatibility 16 Conducted noise 11 Conducted RF immunity 15 Configuring the drive 19 connectors 20 Corrosive environment 18 CSA C22.2 8 I/O duty cycle 16 Identify Device 25 Identify Device command 27 Pipeline HD Series SATA Product Manual, Rev. C 35 - Seagate ST31000322CS | Pipeline HD Series SATA Product Manual - Page 42
prominent discrete tones 15 Q quick reference 3 R Radiated RF immunity 15 radio and television interference 17 radio frequency (RF) 15 Read Buffer 25 Read DMA 25 Read DMA Log Sector 26 S.M.A.R.T. Return Status 26 S.M.A.R.T. Save Attribute Values 26 36 Pipeline HD Series SATA Product Manual, Rev. C - Seagate ST31000322CS | Pipeline HD Series SATA Product Manual - Page 43
Sectors Without Retries 26 T technical support services 33 temperature 9, 13 temperature gradient 13 timer 12 timers 12 track density 8 Track-to-track 9 Track-to-track seek time 9 tunneling magnetoresistive (TMR) recording heads 1 U UL 1950 16 Pipeline HD Series SATA Product Manual, Rev. C 37 - Seagate ST31000322CS | Pipeline HD Series SATA Product Manual - Page 44
38 Pipeline HD Series SATA Product Manual, Rev. C - Seagate ST31000322CS | Pipeline HD Series SATA Product Manual - Page 45
- Seagate ST31000322CS | Pipeline HD Series SATA Product Manual - Page 46
Seagate Technology LLC 920 Disc Drive, Scotts Valley, California 95066-4544, USA Publication Number: 100504234, Rev. C, Printed in U.S.A.
Product Manual
Pipeline HD Series SATA
100504234
Rev. C
October 2008
ST3500321CS
ST3500422CS
ST3320310CS
ST3320410CS
ST3160310CS