Seagate ST9500622SS Constellation SAS Product Manual

Seagate ST9500622SS Manual

Get Seagate ST9500622SS PDF manuals and user guides View all Seagate ST9500622SS manuals
Add to My Manuals
Save this manual to your list of manuals

Seagate ST9500622SS manual content summary:

  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 1
    Product Manual Constellation® SAS Standard Model ST9500430SS Self-Encrypting Drive Model ST9500431SS SED FIPS 140-2 Model ST9500432SS 100538693 Rev. F February 2011
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 2
    LLC in the United States and/or other countries. Constellation and SeaTools are either trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. The FIPS logo is a certification mark of NIST, which does not
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 3
    Contents 1.0 Seagate Technology support services 1 2.0 Scope 2 3.0 Applicable standards and maintenance 15 6.2.3 Hot plugging the drive 15 6.2.4 S.M.A.R.T 16 6.2.5 Thermal monitor 17 6.2.6 Drive Self Test (DST 18 6.2.7 Product dissipation 26 Constellation SAS Product Manual, Rev. F i
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 4
    download 37 9.8 Power requirements 37 9.9 Supported commands 37 10.0 Defect and error management 38 10.1 Drive internal defects/errors 38 10.2 Drive error recovery procedures 38 10.3 SAS descriptions 58 12.4.6 SAS transmitters and receivers 59 ii Constellation SAS Product Manual, Rev. F
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 5
    12.4.7 Power 59 12.5 Signal characteristics 59 12.5.1 Ready LED Out 59 12.5.2 Differential signals 60 12.6 SAS-2 Specification Compliance 60 12.7 Additional information 60 Constellation SAS Product Manual, Rev. F iii
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 6
    iv Constellation SAS Product Manual, Rev. F
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 7
    Air flow 43 Physical interface 55 SAS device plug dimensions 56 SAS device plug dimensions (detail 57 SAS transmitters and receivers 59 Constellation SAS Product Manual, Rev. F 1
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 8
    2 Constellation SAS Product Manual, Rev. F
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 9
    /support/warranty_&_returns_assistance For information regarding Data Recovery Services, visit http://www.i365.com For Seagate OEM & Distribution partner portal, visit https://direct.seagate.com/portal/system For Seagate reseller portal, visit http://spp.seagate.com Constellation SAS Product Manual
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 10
    Applications Engineer (FAE) or our global support services group as shown in Section 1.0. Unless otherwise stated, the information in this manual applies to standard and Self-Encrypting Drive models. Model Number ST9500430SS ST9500431SS ST9500432SS Self-Encrypting Drive (SED) No Yes Yes FIPS 140
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 11
    their systems to perform those tests required and design their system to ensure that equipment operating in the same system as the drive or external to the system does not adversely affect the performance of the drive. See Table 2, DC power requirements. Constellation SAS Product Manual, Rev. F 3
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 12
    confirm compliance with the directives/standards for CE Marking and C-Tick Marking. The drive was tested in a representative system for typical applications. The selected system represents Taiwanese Bureau of Standards, Metrology, and Inspection (BSMI). 4 Constellation SAS Product Manual, Rev. F
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 13
    A number of parts and materials in Seagate products are procured from external suppliers. We rely on the representations of our suppliers regarding the Manual Seagate part number: 100293071 SCSI Commands Reference Manual Seagate part number: 100293068 Self-Encrypting Drives Reference Manual
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 14
    support the Serial Attached SCSI Protocol as described in the ANSI specifications, this document, and the SAS Interface Manual (part number 100293071) which describes the general interface characteristics of this drive. Constellation drives with either SAS or SATA hard disc drives. This allows you to
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 15
    task set (queue) • Supports up applied to the drive • Zone bit Drive models have the following additional features: • Automatic data encryption/decryption • Controlled access • Random number generator • Drive locking • 16 independent data bands • Cryptographic erase of user data for a drive drive
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 16
    msec • Background processing of queue • Supports start and stop commands (spindle stops spinning choose, Seagate recommends product planning in one of two modes: 1. Seagate designs Interface Manual, part number 100293071. A value of zero in the Number of Blocks field indicates that the drive will
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 17
    sparing scheme and sector size requested. • Single-unit shipping pack. The drive is normally shipped in bulk packaging to provide maximum protection against transit number 75789512, is usually included with each standard OEM drive shipped, but extra copies may be ordered. Constellation SAS Product
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 18
    SAS physical interface" on page 55 and the SAS Interface Manual (part number 100293071) for additional timing details. 5.2.1 Access , voltage, and horizontal orientation as measured on a representative sample of drives. 4. Access time = controller overhead + average seek time and applies
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 19
    drive of the same capacity. 5.2.3 General performance characteristics Minimum sector interleave Data buffer to/from disc media (one 512 stop time The drive accepts the commands listed in the SAS Interface Manual less than 3 seconds after DC power has been applied. If the drive receives a NOTIFY
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 20
    the buffer. If the cache is enabled (see RCD bit in the SAS Interface Manual), data requested by the host with a read command is retrieved from the buffer 14 and 15) does not set up a new segment size. If the STRICT bit in Mode page 00h (byte 2, bit 1) is set to one, the drive responds as it does for
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 21
    set up for read functions. The buffer segmentation scheme is set drive does not overwrite data drive drive settings for the drive 0 enables prefetch. The drive does not use the Max drive enables prefetch of contiguous blocks from the disc when it senses that a prefetch hit will likely occur. The drive
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 22
    the following: • The drive is operated in accordance with this manual using DC power as defined in paragraph 7.3, "DC power requirements." • Errors caused by host system failures are excluded from error rate computations. • Assume random data. • Default OEM error recovery settings are applied. This
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 23
    drive service You can enhance the reliability of Constellation disc drives by ensuring that the drive service life of the drive drive drive When a disc is powered on by switching the power or hot plugged, the drive drive looses sync, the drive initiated link reset. The drive fails, the drive does not
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 24
    S.M.A.R.T. functions. When enabled, S.M.A.R.T. collects on-line data as the drive performs normal read and write operations. When the PERF bit is set, the drive is considered to be in "On-line Mode Only" and will is referred to as the Interval Counter. 16 Constellation SAS Product Manual, Rev. F
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 25
    in the temperature log page (see Table 1) can be used to set this trip point. The default value for this drive is 65°C, however, you can set it to any value in the range of 0 to 65°C. If 0000h 0001h Description Primary Temperature Reference Temperature Constellation SAS Product Manual, Rev. F 17
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 26
    it reports a fault condition. If the drive fails the test, remove it from service and return it to Seagate for service. 6.2.6.1 DST failure definition The drive will present a "diagnostic failed" condition extended test) in bytes 1, bits 5, 6, and 7. 18 Constellation SAS Product Manual, Rev. F
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 27
    as follows: 1. The Function Code field is set to the same value as sent in the DST command 2. The Self-Test Results Value field is set to Fh 3. The drive will store the log page to non-volatile self-test routine was interrupted by a reset condition). Constellation SAS Product Manual, Rev. F 19
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 28
    remaining warranty for a particular drive can be determined by calling Seagate Customer Service at 1-800-468-3472 label. Shipping a drive in a non-approved container voids the drive warranty. Seagate repair customer service centers are the only facilities authorized to service Seagate drives. Seagate
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 29
    command. PowerChoiceTM can be invoked using one of these two methods: • Power set in the Power Condition mode page. • START STOP UNIT command method-Use the START STOP UNIT command (OPERATION CODE 1Bh). This allows the host to directly transition the drive to any supported Manual, Rev. F 21
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 30
    Supported drive controller ASIC is enabled and functional in the SED models. This represents a small additional drain on the 5V supply of about 30mA and a commensurate increase of about 150mW in power consumption. There is no additional drain on the 12V supply. 22 Constellation SAS Product Manual
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 31
    Table 2: 500GB drive (Standard & SED model) DC power these values. [3] Power supply at nominal voltage. N (number of drives tested) = 6, 35 Degrees C ambient. [4] For +12 V, be maintained after the drive signifies that its power-up sequence has been completed and that the drive is able to accept
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 32
    the drive has idle, the drive heads are relocated drives from a common supply, careful consideration for individual drive -to-peak measurements and apply at the drive power connector. +5v = 250 mV drive does not require power sequencing. The drive protects against inadvertent writing during power-up and
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 33
    7.3.3 Current profiles The +12V (top) and +5V (bottom) current profiles for the Constellation drives are shown below. Figure 1. 500GB model current profiles Note: All times and currents are typical. See Table 2 for maximum current requirements. Constellation SAS Product Manual, Rev. F 25
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 34
    to the following I/O rate curve (see Figure 2). Locate the typical I/O rate for a drive in your system on the horizontal axis and read the corresponding +5 volt current, +12 volt For power details about SED vs. non-SED drive, please refer to section 7.8. 26 Constellation SAS Product Manual, Rev. F
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 35
    the following I/O rate curve (see Figure 3.). Locate the typical I/O rate for a drive in your system on the horizontal axis and read the corresponding +5 volt current, + about SED vs. non-SED drive, please refer to section 7.8. Power (watts) 5Volt A 12 Volt A Watts Constellation SAS Product
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 36
    drive meets all specifications over a 41°F to 131°F (5°C to 55°C) drive drives ability to meet specifications. The MTBF specification for the drive to drive ambient the drive in drive is packaged in the shipping container designed by Seagate for use with drive condensation on the drive occurs. a.
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 37
    drive chassis. If the drive drive movement. The limits of shock and vibration defined within this document are specified with the drive normal The drive, as The drive, as drive drives and integrated drives. The drive axis. The drive subjected to nonrepetitive axis. The drive subjected to nonrepetitive
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 38
    height 60 in (1524 mm) 48 in (1219 mm) 42 in (1067 mm) 36 in (914 mm) Drives packaged in single or multipacks with a gross weight of 20 pounds (8.95 kg) or less by Seagate for general floor or equivalent. Z Y X X Z Y Figure 5. Recommended mounting 30 Constellation SAS Product Manual, Rev. F
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 39
    shall apply to all conditions of handling and transportation. This includes both isolated drives and integrated drives. The drive shall not incur physical damage or degraded performance as a result of continuous circuitry with sulfide-free alternatives. Constellation SAS Product Manual, Rev. F 31
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 40
    2.3 bels typical when measured to ISO 7779 specification. There will not be any discrete tones more than 10 dB above the masking noise on typical drives when measured according to Seagate specification 30553-001. There will not be any tones more than 24 dB above the masking noise on any
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 41
    specifications Refer to Figure 6 for detailed mounting configuration dimensions. See Section 11.3, "Drive mounting." Weight: 0.50 pounds 0.227 kilograms Note. These dimensions conform to the in mm in mm Figure 6. Mounting configuration dimensions Constellation SAS Product Manual, Rev. F 33
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 42
    Federal Information Processing Standard (FIPS) 140-2 Level 2 Certification requires drives to go through government agencies certifications to add requirements for physical tamper of FIPS tamper evidence labels. Note. Does not represent actual drive. 34 Constellation SAS Product Manual, Rev. F
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 43
    drive in their command payloads. 9.1 Data encryption Encrypting drives use one external to the encryption engine. A unique data encryption key is used for each of the drive's possible16 data bands (see Section 9.5). 9.2 Controlled access The drive to the drive security services. Security-related
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 44
    password When the drive is shipped from the factory, all passwords are set to the value of MSID. This 32-byte random value is printed on the drive label and it be sequential with one band ending at LBA (x) and the next beginning at LBA (x+1). Each data band has its own drive-generated encryption
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 45
    written with one key and will be read using a different key. Since the drive overwrites the old key with the new one, and download attempts, the drive also only accepts drive models. 9.9 Supported commands The SED models support the following two commands in addition to the commands supported by
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 46
    set in the Error Recovery Parameters mode page. Error recovery and defect management may involve using several SCSI commands described in the SAS Interface Manual. The drive implements selectable error recovery time limits required in video applications. The error recovery scheme supported
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 47
    bit is one, reallocations are disabled even if the ARRE or AWRE bits are one. The drive will still RC bit = 0, the read retry count set to 4, and the recovery time limit set to 450. A 4-block read command can interface is given in the SAS Interface Manual. The SSP Response returns information to
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 48
    service by the host system. On regular duty drives, if the host system makes use of the BMS Log Page, it can avoid placing data in suspect locations on the media. Unreadable and recovered error sites will be logged or reallocated per ARRE/AWRE settings service drive's life. The default setting setting
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 49
    written data from the media and compares it to valid write command data resident in the drives data buffer. Any sectors that fail the comparison result in the invocation of a rewrite and this rewrite fails, the sector is re-mapped to a spare location. Constellation SAS Product Manual, Rev. F 41
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 50
    jumpers, switches, or terminators on the drive. SAS drives are designed to be used in a host system that provides a SAS-compatible backplane with bays designed to accommodate the drive host system using the instructions provided by the host system. This connects the drive directly to your system's
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 51
    should be chosen to minimize the travel length of air heated by the drive and other heat sources within the rack, cabinet, or drawer environment. If are shown in Figure 9. The air-flow patterns are created by one or more fans, either forcing or drawing air as shown in the Product Manual, Rev. F 43
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 52
    you mount the drive using the bottom holes, ensure that you do not physically distort the drive by attempting to in the drive and cannot be separated by the user. The equipment in which the drive is mounted is electrically isolating) method of mounting the drive in the host equipment. Increased
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 53
    lists the SAS-specific features supported by Constellation drives. 12.1.1 task management functions Table 4 lists the SAS task management functions supported. Table 4: SAS task management functions supported Task name Abort Task Clear ACA Clear task set Abort task set Logical Unit Reset Query
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 54
    drives support: • Concurrent port transfers-The drive supports receiving COMMAND, TASK management transfers on both ports at the same time. • Full duplex-The drive supports sending XFER_RDY, DATA and RESPONSE transfers while receiving frames on both ports. 46 Constellation SAS Product Manual
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 55
    supported by Constellation drives. Table 6: Supported commands Command name Change Definition Compare Copy Copy and Verify Format Unit [1] DPRY bit supported DCRT bit supported STPF bit supported IP bit supported DSP bit supported IMMED bit supported 81h) Jumper Settings page (C2h) Supported Vital
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 56
    bit supported FUA bit supported Read (12) A8h Read (16) 88h Read (32) 7Fh/0009h Read Buffer (modes 0, 2, 3, Ah and Bh supported) 3Ch Supported N N Y Y Y N Y Y Y Y Y Y [2] Y Y [2] Y Y Y Y Y Y N Y Y Y Y Y N Y Y Y N Y Y Y Y N Y N Y (non-SED drives only) 48 Constellation SAS Product Manual
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 57
    ) Send Diagnostics Supported Diagnostics pages (00h) Translate page (40h) Set Limits Start Unit SAS Product Manual, Rev. F Command code 25h 9Eh/10h 37h B7h 3Eh 9Eh/11h 07h 1Ch 17h 57h A0h 03h 16h 56h 01h 31h 30h 32h A2h B5h 0Bh 2Bh 1Dh 33h 1Bh 35h 91h 00h Supported Y Y Y Y Y (non-SED drives only)
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 58
    Verify (16) Write and Verify (32) Write Buffer (modes 0, 2, supported) Write Buffer Firmware Download option (modes 5, 7, Ah and Bh) [3] Supported Y Y N Y N Y Y Y Y N Y N Y Y N Y N Y (non-SED drives only) Y (non-SED drives only) Y (SED drives only) Y Y Y N N Y N N N N [1] Constellation drives
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 59
    drive should return to the initiator per the format given in the SAS Interface Manual ** SCSI Revision support. See the appropriate drive to report its operating parameters to the initiator. The drive maintains four sets of mode parameters: 1. Default values Default values are hard-coded in the drive
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 60
    after a power on reset, hard reset, or Bus Device Reset message all of the bits in byte 02 are ones, all of these bits are changeable. The changeable drive in response to the Mode Sense command pages for SCSI implementation (see the SAS Interface Manual ). DEF = Default value. Standard OEM drives
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 61
    Table 8: Mode Sense data changeable and default values for 500GB drives MODE DATA HEADER: 01 92 00 10 00 00 00 08 BLOCK DESCRIPTOR: 3a 38 60 30 00 00 02 00 MODE PAGES: DEF 81 ff ff ff ff DEF 80 06 00 80 0f 00 00 00 CHG 80 06 b7 c0 8f 00 00 00 Constellation SAS Product Manual, Rev. F 53
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 62
    10: Miscellaneous status Supported Y Status Good Y Check condition Y Condition met/good Y Busy Y Intermediate/good Y Intermediate/condition met/good Y Reservation conflict Y Task set full N ACA active N ACA active, faulted initiator 54 Constellation SAS Product Manual, Rev. F
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 63
    the dimensions of the SAS connector. Details of the physical, electrical, and logical characteristics are provided within this section. The operational aspects of Seagate's SAS drives are provided in the SAS Interface Manual. Figure 10. Physical interface Constellation SAS Product
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 64
    (6X) 5.08 B 0.84 0.05 (22X) 0.15 B 4.90 0.08 P15 P1 S1 S7 CL OF DATUM B Figure 11. SAS device plug dimensions 56 Constellation SAS Product Manual, Rev. F
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 65
    DATUM A 0.03 1.23 0.05 65 30 0.08 0.05 Detail 2 1.90 0.08 2.40 0.08 0.10 A D Figure 12. SAS device plug dimensions (detail) SECTION B - B Constellation SAS Product Manual, Rev. F 57
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 66
    B_out Diff output pair S13* +Port B_out S14 Port B Ground * - Short pin to support hot plugging NC - No connection in the drive. Pin Signal name Signal type P1* NC (reserved 3.3Volts) P2* NC (reserved 3.3Volts) P14* 12 Volts P15* 12 Volts 58 Constellation SAS Product Manual, Rev. F
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 67
    and signal name information. 12.5.1 Ready LED Out The Ready LED Out signal is driven by the drive as indicated in Table 12. Table 12: Ready LED Out conditions Normal command activity Ready LED Meaning on and off for 0.5 seconds) Toggles on/off Constellation SAS Product Manual, Rev. F 59
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 68
    resistor are external to the drive. See Table 13 for the output characteristics of the LED drive signals. Table 13: LED drive signal State Manual, part number 100293071. For more information about the SCSI commands used by Seagate SAS drives, refer to the Seagate SCSI Commands Reference Manual
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 69
    10 Constellation SAS Product Manual, Rev. F task set function 45 commands supported 47 condensation 28 condition met/good status 54 connector illustrated 58 requirements 58 continuous vibration 31 cooling 43 CRC error 15 Cryptographic erase 37 C-Tick 4 Current profiles 25 customer service
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 70
    guide 5 interface commands supported 47 error rate 14 errors 15 illustrated 55 physical 55 requirements 45 interleave minimum 11 intermediate/condition met/good status 54 intermediate/good status 54 internal data rate 10 internal defects/errors 38 internal drive characteristics 10 IRAW 41 J jumpers
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 71
    (locked) spindle operation 54 Zero latency read 54 miscellaneous status support ACA active 54 ACA active, faulted initiator 54 Busy 54 Check condition met/good 54 Intermediate/good 54 Reservation conflict 54 Task set full 54 miscorrected media data 14 Mode sense data, table Manual, Rev. F 63
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 72
    task set full status 54 TCG 35 technical support services 1 temperature 28, 43 ambient 28 case 28 gradient 28 limits 28 non-operating 28 regulation 3 See also cooling terminate task function 45 terminators 42 tracks per inch 10 tracks per surface 10 transmitters 59 transporting the drive 20 Trusted
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 73
    U unformatted 8 Unrecoverable Errors 14 unrecovered media data 14 V vibration 29, 31 W warranty 20 Z zero latency read 54 zone bit recording (ZBR) 7 Constellation SAS Product Manual, Rev. F 65
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 74
    66 Constellation SAS Product Manual, Rev. F
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 75
  • Seagate ST9500622SS | Constellation SAS Product Manual - Page 76
    Seagate Technology LLC 920 Disc Drive, Scotts Valley, California 95066-4544, USA Publication Number: 100538693, Rev. F
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
Product Manual
Constellation
®
SAS
100538693
Rev. F
February 2011
Standard Model
ST9500430SS
Self-Encrypting Drive Model
ST9500431SS
SED FIPS 140-2 Model
ST9500432SS