Sealey BSCU170 Instruction Manual
Sealey BSCU170 Manual
 |
View all Sealey BSCU170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sealey BSCU170 manual content summary:
- Sealey BSCU170 | Instruction Manual - Page 1
BATTERY CHARGER/POWER SUPPLY MODEL NO: BSCU170 © Jack Sealey Limited Original Language Version BSCU170 Issue:1 - 25/10/18 - Sealey BSCU170 | Instruction Manual - Page 2
instructions and precautions carefully, as this manual contains important safety and operating instructions. The safety messages used throughout this manual or plug; have the cord or plug replaced immediately by a qualified service person. 88 DO NOT operate the charger if it has received a sharp - Sealey BSCU170 | Instruction Manual - Page 3
all instructions for the charger, battery, vehicle and any equipment used near the battery and charger. Study all of the battery manufacturer's specific precautions while charging and recommended rates of charge. Determine the voltage of the battery by referring to the vehicle owner's manual. Make - Sealey BSCU170 | Instruction Manual - Page 4
BSCU170 is non-portable equipment. Suitable for mounting only on concrete or other non-combustible surfaces. To permanently mount the charger, use the following instructions: Slide all 4 brackets (Item 1) into the track on the back, from the right side, as shown above. Make sure the set screws (Item - Sealey BSCU170 | Instruction Manual - Page 5
other personal property damage or personal injury. ●Mode Button: Use this button to select between the AUTOMATIC CHARGE, MANUAL CHARGE and FLASH REPROGRAM function. See Operating Instructions for details of these functions. ●Battery Type/Desulfation Mode Button: Set the type of battery to be - Sealey BSCU170 | Instruction Manual - Page 6
, charging will abort and the charger will go into Abort Mode. If MANUAL CHARGE mode is selected and the timer is set to between 10-120 unplugged from the AC outlet, connect the charger to the battery following the instructions given in Sections 6 and 7. 2. Plug the charger AC power cord into - Sealey BSCU170 | Instruction Manual - Page 7
in place and in good working condition, including the plastic boots on the battery clips. Servicing does not require opening the unit, as there are no user-serviceable parts. 13. MOVING AND STORAGE INSTRUCTIONS 13.1. 13.2. If the charger is moved around the shop or transported to another location - Sealey BSCU170 | Instruction Manual - Page 8
15. TROUBLESHOOTING PROBLEM NO DISPLAY AND THE LEDS ARE NOT LIT. DISPLAY READS 0.0 VOLTS. AMPS DIRT AND GRIME OFF THE FAN BLADES USING COMPRESSED AIR AS DESCRIBED IN MAINTENANCE INSTRUCTIONS. HAVE THE BATTERY CHECKED. RECHARGE THE BATTERY. ENVIRONMENT PROTECTION Recycle unwanted materials instead
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
BSCU170
Issue:1 - 25/10/18
Original Language Version
© Jack Sealey Limited
BATTERY CHARGER/POWER SUPPLY
MODEL NO:
BSCU170