Sealey LEDFLEXG Instruction Manual

1 COB + 1 LED FLEXI RECHARGEABLE

INSPECTION LAMP GREEN LI-ION

MODEL NO:

LEDFLEXG

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,

and properly maintained, give you years of trouble free performance.

1. SAFETY

i

1.1.

GENERAL

9

Ensure the lamp is fully charged before initial use.

8

DO NOT

turn the lamp on when it is being charged.

8

DO NOT

shine directly into your, another person’s or an animal’s eyes.

8

DO NOT

allow children to use the lamp.

8

DO NOT

use the lamp if you suspect that the battery or the lamp casing is damaged.

8

DO NOT

leave battery in a discharged state, recharge battery immediately. Before storage, fully recharge the battery, subsequently

recharge the battery at least once every six months of non-use.

1.2.

BATTERY SAFETY

±

WARNING!

To reduce the risk of burns or fire:

8

DO NOT

attempt to open, disassemble, modify or service the battery pack.

8

DO NOT

crush, puncture, short external contacts or dispose of in fire or water.

8

DO NOT

expose to temperatures above 60°C (140°F).

9

If the electrolyte in the cells gets on your skin, thoroughly wash with soap and water. If it gets in your eyes, rinse thoroughly with cool

water and seek immediate medical attention

2. INTRODUCTION

Unique new 360° design made from high impact materials. High power COB LED produces up to 500 lumens in tight spaces like engine

compartments. Features a 160mm strong heavy-duty flexible neck with the ability to hold its position wherever you need it. Top light is a 3W LED

producing up to 120 lumens. Features a sturdy base which means it can also be used as a desk lamp. Base includes a strong magnet and 90°

folding hook. One switch controls top light, side light and dimmer function. Features LED battery charge level indicator and charges via a USB

Type-C lead. (Supplied with USB Type-C Cable).

3. SPECIFICATION

Model no:

...........................................................

LEDFLEXG

Battery:

......................................................

3.7V 2.6 Ah Li-ion

Charging time:

...................................................................

4hr

LED Qty:

.......................................................

1 COB + 1 LED

Lumen output:

............................

Side 50 - 500lm / Top 120lm

Operating time:

.................................

Side:2-16hr /

Top 9.5hr

Overall length:

............................................................

425mm

IP Rating:

........................................................................

IP54

4. OPERATION

4.1.

CHARGING

4.1.1.

Lift rubber cover and connect micro USB cable to socket on rear of handle (fig2).

4.1.2.

The unit has 3 LEDs to indicate charge level (fig.2). Whilst charging the LEDs will

flash. Once fully charged all LEDs will be permanently lit.

4.2.

LIGHTING MODES

4.2.1.

The unit has four lighting modes, LED, COB, COB Dimmer or Off. To select LED

press and hold Mode Selector switch (fig.1). To change to COB mode press and hold

Mode Selector once more. To dim COB mode rotate Mode Selector switch to achieve

desired light level. To turn unit off, press and hold Mode Selector once more.

LEDFLEXG

Issue 4 (2)

04/08/20

Original Language Version

© Jack Sealey Limited

Refer to

instruction

manual

fig.1

fig.2