Sennheiser SKP 100 G4 Instruction manual ew 100 P G4 PDF
Sennheiser SKP 100 G4 Manual
View all Sennheiser SKP 100 G4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sennheiser SKP 100 G4 manual content summary:
- Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 1
evolution wireless G4 100 P series Instruction Manual Sennheiser electronic GmbH & Co. KG Am Labor 1, 30900 Wedemark, Germany, www.sennheiser.com ew 100 P G4 - v2.2 - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 2
Overview 6 ew 100 P G4 series products 7 EK 100 G4 diversity receiver 8 SKM 100 G4 handheld transmitter 9 SK 100 G4 bodypack transmitter 10 SKP 100 G4 plug-on transmitter 11 Accessories 12 Microphones and cables 13 Microphone modules 13 Headset and Lavalier microphones 13 Line connecting cable 15 - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 3
-> Software Revision menu item 67 Using the SKM 100 G4 68 Operating elements of the SKM 100 G4 handheld transmitter 69 Switching the SKM 100 G4 handheld transmitter on and off 70 Muting the handheld transmitter (AF mute) 71 SKM 100 G4 71 SKM 100 G4-S 71 Deactivating the RF signal (RF mute) 72 - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 4
> Reset menu item 102 Advanced > Software Revision menu item 102 Using the SKP 100 G4 103 Operating elements of the SKP 100 G4 plug-on transmitter 104 Switching the SKP 100 G4 plug-on transmitter on and off 105 Muting the plug-on transmitter (AF mute) 106 Deactivating the RF signal (RF mute) 107 - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 5
device 130 SKM 100 G4 131 RF characteristics 131 AF characteristics 131 Overall device 132 SK 100 G4 133 RF characteristics 133 AF characteristics 133 Overall device 134 SKP 100 G4 135 RF characteristics 135 AF characteristics 136 Overall device 136 Pin assignment 137 3.5 mm stereo jack plug 137 4 - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 6
6.3 mm stereo jack plug, balanced (audio in/loop out) 137 6.3 mm mono jack plug, unbalanced 138 6.3 mm stereo jack plug for headphone jack 138 XLR-3 plug, balanced 138 Hollow jack plug for power supply 138 Cleaning and maintenance 139 Cleaning the sound inlet basket of the microphone module 139 5 - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 7
You can find information about the individual products in the ew 100 P G4 series under "ew 100 P G4 series products". For information about the available accessories, see "Accessories". You can find information about the ew 100 P G4 series frequency bank system under "The frequency bank system - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 8
under "Product variants". • You can find technical specifications about the individual products under "Specifications". • You can find information about installing the products under "Installing ew 100 P G4 series devices". • You can find information about operating the products under "Using - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 9
EK 100 G4 diversity receiver ► You can find more detailed information about the EK 100 G4 in the following sections: • Installation and Startup: "Installing the EK 100 G4" • Operation: "Using the EK 100 G4" • Technical Data: "EK 100 G4" 8 - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 10
SKM 100 G4 handheld transmitter ► SKM 100 G4 variant: ► SKM 100 G4-S variant: ► The SKM 100 G4 handheld transmitter is also available in the SKM 100 G4S variant with an integrated mute switch. You can find more detailed information about the SKM 100 G4 in the following sections: • Installation and - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 11
SK 100 G4 bodypack transmitter ► You can find more detailed information about the SK 100 G4 in the following sections: • Installation and Startup: "Installing the SK 100 G4" • Operation: "Using the SK 100 G4" • Technical Data: "SK 100 G4" 10 - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 12
SKP 100 G4 plug-on transmitter ► You can find more detailed information about the SKP 100 G4 in the following sections: • Installation and Startup: "Installing the SKP 100 G4" • Operation: "Using the SKP 100 G4" • Technical Data: "SKP 100 G4" 11 - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 13
Accessories Accessories A variety of accessories are available for the ew 100 P G4 series. 12 - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 14
their respective product pages at www.sennheiser.com. Headset and Lavalier microphones We recommend using the following Lavalier microphones and headset microphones with the SK 100 G4 bodypack transmitter. ► Microphone Features Article no. ME 2-II Lavalier microphone, omni-direc- 507437 tional - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 15
Features Headband microphone, omni-directional, beige Headband microphone, omni-directional, black Headband microphone, omni-directional, silver Article no. 506272 506271 506904 You can find more information about the individual microphones on their respective product pages at www.sennheiser.com - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 16
Accessories Line connecting cable The following cables can be used to connect cameras to the EK 100 G4 diversity receiver: • CL 1 3.5 mm jack plug on lockable 3.5 mm jack plugs Article no. 005022 ► • CL 100 XLR-3 on a 3.5 mm jack plug Article no. 087046 ► 15 - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 17
battery and charger BA 2015 rechargeable battery The BA 2015 rechargeable battery is designed for use with evolution wireless G4 series handheld transmitters, bodypack transmitters and bodypack receivers. Article no. 009950 ► L 2015 charger The BA 2015 rechargeable battery can be charged in the - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 18
Accessories Accessories for camera mounting CA 2 camera adapter Camera adapter with hot shoe for portable bodypack transmitters/receivers from the ew G1, G2, G3 and G4 series. Article no. 009986 ► 17 - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 19
Accessories Additional accessories Color labeling set • KEN 2, color labeling set for SKM handheld transmitters Article no. 530195 ► Microphone clamp • MZQ 1, microphone clamp for SKM handheld transmitters Article no. 076670 ► 18 - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 20
the UHF band available for transmission. The following frequency ranges are available for the ew 100 G4 series: • A1 range: 470 - 516 MHz • A range: 516 - 558 MHz • AS range: 520 - 558 MHz • G range: 566 - 608 MHz • GB range: 606 - 648 MHz • B range: 626 - 668 MHz • C range: 734 - 776 MHz • D range - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 21
the EK 100 G4" • SKM 100 G4 handheld transmitter >> "Installing the SKM 100 G4" • SK 100 G4 bodypack transmitter >> "Installing the SK 100 G4" • SKP 100 G4 plug-on transmitter >> "Installing the SKP 100 G4" You can find information about operating the products under "Using ew 100 P G4 series devices - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 22
. You can find information about operating the EK 100 G4 under "Using the EK 100 G4". Inserting and removing the batteries/rechargeable batteries You can operate the diversity receiver either with batteries (AA, 1.5 V) or with the rechargeable Sennheiser BA 2015 battery. ▷ Press the two catches and - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 23
Battery status Charge status of the batteries: ► Installing the EK 100 G4 Charge status is critical (LOW BATT): ► 22 - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 24
to a camera You can attach the diversity receiver on the hot shoe of the camera with the included CA 2 camera kit. To attach the EK 100 G4 diversity receiver to a camera: ▷ Determine where on the perforated plate you need to attach the hot shoe adapter so that the diversity receiver can be - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 25
Installing the EK 100 G4 ▷ Lift the belt clip. ▷ Press one side of the clip downward on the fixing hole and pull it out of the housing. ▷ Do the same thing on the other side. ▷ Place the perforated plate on the rear side of the diversity receiver. ▷ Reattach the clip. 24 - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 26
▷ Slide the receiver onto a camera. Installing the EK 100 G4 25 - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 27
Installing the EK 100 G4 Connecting the diversity receiver to a camera To connect the diversity receiver to a camera: ▷ Attach the line input of the camera to the jack socket of the receiver us- ing one of the enclosed line connecting cables. 26 - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 28
Installing the EK 100 G4 ▷ Adjust the level of the AF Out audio output in the operating menu of the diversity receiver based on the input level of the camera ( - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 29
Installing the SKM 100 G4 Installing the SKM 100 G4 These sections contain detailed information about installing and starting up the SKM 100 G4. You can find information about operating the SKM 100 G4 under "Using the SKM 100 G4". 28 - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 30
Installing the SKM 100 G4 Inserting and removing the batteries/rechargeable batteries You can operate the wireless microphone either with batteries (AA, 1.5 V) or with the rechargeable Sennheiser BA 2015 battery. ▷ Screw the rear part of the wireless microphone in the direction of the arrow (counter - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 31
Battery status Charge status of the batteries: ► Installing the SKM 100 G4 Charge status is critical (LOW BATT): ► 30 - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 32
Installing the SKM 100 G4 Replacing the microphone module You can find a list of the recommended microphone modules for the handheld transmitter under "Microphones and cables". To change the microphone module: ▷ Unscrew the microphone module. ▷ Screw the desired microphone module on. ► Do not touch - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 33
Installing the SKM 100 G4 Changing the colored ring To change the colored ring: ▷ Pull the colored ring off as shown in the diagram. ► ▷ Attached a colored ring in the color you want as shown in the diagram. ► 32 - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 34
Installing the SK 100 G4 Installing the SK 100 G4 These sections contain detailed information about installing and starting up the SK 100 G4. You can find information about operating the SK 100 G4 under "Using the SK 100 G4". 33 - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 35
Installing the SK 100 G4 Inserting and removing the batteries/rechargeable batteries You can operate the bodypack transmitter either with batteries (AA, 1.5 V) or with the rechargeable Sennheiser BA 2015 battery. ▷ Press the two catches and open the battery compartment cover. ▷ Insert the batteries - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 36
Battery status Charge status of the batteries: ► Installing the SK 100 G4 Charge status is critical (LOW BATT): ► 35 - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 37
Installing the SK 100 G4 Connecting a microphone to the SK 100 G4 You can find a list of recommended Lavalier and headset microphones for the bodypack transmitter under "Microphones and cables". To connect a microphone to the bodypack transmitter: ▷ Insert the cable's 3.5 mm jack plug into the MIC/ - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 38
or line source to the SK 100 G4 You can connect instruments or audio sources with a line level to the bodypack transmitter. To do this, you will need the Ci 1-N (6.3 mm jack plug on a lockable 3.5 mm jack plug) or CL 2 (XLR-3F plug on lockable 3.5 mm jack plug) Sennheiser cables. To connect an - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 39
Installing the SK 100 G4 Attaching the bodypack transmitter to clothing You can use the belt clip to attach the bodypack transmitter to your waistband or on a guitar strap. The belt clip is detachable so that you can also attach the bodypack transmitter with the antenna pointing downwards. To do so, - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 40
Installing the SKP 100 G4 Installing the SKP 100 G4 These sections contain detailed information about installing the SKP 100 G4. You can find information about operating the SKP 100 G4 under "Using the SKP 100 G4". 39 - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 41
Installing the SKP 100 G4 Inserting and removing the batteries/rechargeable batteries You can operate the plug-on transmitter either with batteries (AA, 1.5 V) or with the rechargeable Sennheiser BA 2015 battery. ▷ Slide the battery compartment cover in the direction of the embossed arrow and open - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 42
Battery status Charge status of the batteries: ► Installing the SKP 100 G4 Charge status is critical (LOW BATT): ► 41 - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 43
the SKP 100 G4 Attaching the plug-on transmitter to the microphone Microphones with a metal casing should be used for optimal signal transmission. ▷ Loosen the locking ring (2) by rotating it in the clockwise direction past the center point. This unlocks the XLR-3 plug (1) of the plug-on transmitter - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 44
using ew 100 P G4 series devices in the following sections. • EK 100 G4 diversity receiver >> "Using the EK 100 G4" • SKM 100 G4 handheld transmitter >> "Using the SKM 100 G4" • SK 100 G4 bodypack transmitter >> "Using the SK 100 G4" • SKP 100 G4 plug-on transmitter >> "Using the SKP 100 G4" You - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 45
>> "Displays on the SKM 100 G4 handheld transmitter display panel" • Using the menu of the bodypack transmitter >> "Displays on the SK 100 G4 bodypack transmitter display panel" • Using the menu of the plug-on transmitter >> "Displays on the SKP 100 G4 plug-on transmitter display panel" 44 - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 46
Using the EK 100 G4 Using the EK 100 G4 These sections contain detailed information about using the EK 100 G4. You can find information about installing the EK 100 under "Installing the EK 100 G4". 45 - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 47
Using the EK 100 G4 Operating elements of the EK 100 G4 diversity receiver ► 1 Display panel • See "Displays on the EK 100 G4 display panel" 2 Operation and battery indicator, red LED • illuminated = ON See "Switching the EK 100 G4 on and off" • flashing = LOW BATTERY See "Inserting and removing the - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 48
ESC function in the operating menu • Switch the transmitter on or off See "Switching the EK 100 G4 on and off" • Escape function in the menu 100 G4 on and off ▷ Press the two catches and open the battery compartment cover. To switch the receiver on: ▷ Hold down the ON/OFF button until the Sennheiser - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 49
Using the EK 100 G4 Lock-off function You can set the automatic lock-off function in the Auto lock menu (see "Auto Lock menu item"). When you have switched on the lock-off function, you will have to turn the transmitter off and on again in order to operate it. To temporarily deactivate - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 50
Using the EK 100 G4 Displays on the EK 100 G4 display panel Status information such as reception quality, battery status, audio level, etc. is displayed on the home screen of the display panel. See "Home - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 51
Using the EK 100 G4 Buttons for navigating through the menu To navigate through the EK 100 G3 operating menu, you need the following buttons. ► Press the ON/OFF button • ESC function: Cancels the entry and returns to the current standard dis- - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 52
Using the EK 100 G4 ► Press the UP or DOWN button • Changes to the previous or next menu item • Changes the setting of a menu item 51 - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 53
Using the EK 100 G4 Home screen After you switch on the receiver, the display panel initially displays the Sennheiser logo. After a audio level (audio frequency) • Displays the audio level of the received transmitter When the display shows full deflection, the audio input level is excessively high - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 54
Using the EK 100 G4 6 Battery status of the receiver • See "Inserting and removing the batteries/rechargeable batteries" 7 MUTE muting function • No RF signal received 8 P pilot shows the level of the line output AF Out instead of the MUTE muting function. ► B.Ch: 1. 1 ew100 G4 RF AF P +6dB 53 - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 55
EK 100 G4 menu, you can configure the following settings. Synchronizing the transmitter with the diversity receiver ▷ See "Sync menu item" Adjusting the squelch threshold ▷ See "Squelch menu item" Scanning for unused frequency presets, releases and selects frequency presets ▷ See "Easy Setup menu - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 56
Using the EK 100 G4 Menu structure The figure shows the complete EK 100 G4 menu structure in an overview. 55 - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 57
Using the EK 100 G4 Sync menu item In the Sync menu item you can synchronize ew 100 P G4 series transmitters and receivers. For more information, see "Establishing a radio link". 56 - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 58
Using the EK 100 G4 Squelch menu item You can adjust the squelch threshold in the Squelch menu item. Setting range: • Low >> 5 dBμV • Middle >> 15 dBμV • High >> 25 dBμV The - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 59
Using the EK 100 G4 CAUTION Risk of hearing and material damage If you set the squelch threshold to a very low value, a very loud hissing noise can occur in the - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 60
Using the EK 100 G4 Easy Setup menu item You can scan for unused frequencies using the Easy Setup menu item. used. Switch off all transmitters before you perform the scan. If transmitters are still switched on, they are detected as unavailable frequencies and the frequencies that are actually - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 61
Using the EK 100 G4 ▷ Press the SET button to save the changes you made to the settings. or ▷ Press the ON/OFF button to cancel the entry without saving the set- tings. 60 - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 62
Using the EK 100 G4 Frequency Preset menu item In the Frequency Preset menu item, you can adjust the receiving frequency of the receiver by adjusting the frequency bank and - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 63
Using the EK 100 G4 Name menu item In the Name menu item you can enter a name for the radio link. To open the Name menu item: ▷ On the home - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 64
Using the EK 100 G4 AF Out menu item In the AF Out menu item you can adjust the level of the line audio output based on the level of - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 65
Using the EK 100 G4 Auto Lock menu item In the Auto Lock menu item you can activate or deactivate the auto lockoff function. You can find information about temporarily - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 66
Using the EK 100 G4 Advanced menu item In the Advanced submenu you can configure enhanced settings. To open the Advanced submenu: ▷ On the home screen, press the SET button - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 67
Using the EK 100 G4 Advanced -> Tune menu item In the Tune menu item of the Advanced submenu, you can configure the the pilot tone evaluation. ► The pilot tone has an inaudible frequency that is sent from the transmitter and evaluated by the receiver. It supports the receiver's squelch function. 66 - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 68
Using the EK 100 G4 Advanced -> LCD Contrast menu item In the LCD Contrast menu item of the Advanced submenu, you can adjust the display contrast of the display panel - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 69
Using the SKM 100 G4 Using the SKM 100 G4 These sections contain detailed information about using the SKM 100 G4 and SKM 100 G4-S. You can find information on installation and startup of the SKM 100 G4 and SKM 100 G4-S under "Installing the SKM 100 G4". 68 - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 70
, UP and SET multi-function switch • See "Buttons for navigating the SKM 100 G4 menu" 4 ON/OFF button with ESC function in the operating menu • Switch the transmitter on or off See "Switching the SKM 100 G4 handheld transmitter on and off" • Escape function in the menu See "Buttons for navigating - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 71
)" • See "Advanced > Mute Mode menu item (SKM 100 G4-S only)" Switching the SKM 100 G4 handheld transmitter on and off To switch on the SKM 100 G4: ▷ Hold down the ON/OFF button until the Sennheiser logo appears on the display. ► To switch off the SKM 100 G4: ▷ Hold down the ON/OFF button until the - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 72
Using the SKM 100 G4 Muting the handheld transmitter (AF mute) SKM 100 G4 The audio signal of the transmitter cannot be muted. However, when you deactivate the RF signal no AF signal is output. See "Deactivating the RF signal (RF mute)". SKM 100 G4-S You can mute the audio signal by pressing the MIC - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 73
. ▷ Press the SET button. The transmission frequency is displayed, however the wireless microphone is not transmitting an RF signal. The transmission icon is not lit (see "Displays on the SKM 100 G4 handheld transmitter display panel"). To activate the RF signal: ▷ Short-press the ON/OFF button - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 74
set the automatic lock-off function in the Auto lock menu (see "Buttons for navigating the SKM 100 G4 menu"). When you have switched on the lock-off function, you will have to turn the transmitter off and on again in order to operate it. To temporarily deactivate the lock-off function: ▷ Press - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 75
Using the SKM 100 G4 Displays on the SKM 100 G4 handheld transmitter display panel You can view the following information on the transmitter display. ► 1 AF audio level • Displays the audio level with peak hold function • See "Sensitivity menu item" 2 Frequency • Configured transmission frequency • - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 76
Using the SKM 100 G4 >> "Buttons for navigating the SKM 100 G4 menu" >> "Setting options in the menu" Select a standard display ▷ Move the multi-function switch to select a standard display: Frequency/Name standard display ► 548.100MHz ew100 G4 AF P MUTE Channel/Frequency standard display ► B.Ch: 20 - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 77
DOWN buttons to navigate through the individual menu items. ▷ Press the SET button to open the selected menu item. "Operating elements of the SKM 100 G4 handheld transmitter" Making changes in a menu item After you open a menu item, you can make changes as follows: ▷ Press the UP or DOWN buttons to - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 78
options in the menu In the SKM 100 G4 menu, you can configure the following settings. Adjusting the input MIC button setting (SKM 100 G4-S only) • Activating/deactivating the pilot tone evaluation • Adjusting the contrast of the display panel • Resetting the transmitter • Displaying the current - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 79
Using the SKM 100 G4 Sensitivity menu item • Adjusting the input sensitivity - AF audio level ► Setting range: 0 dB to -48 dB in 6 dB steps. The AF audio level is also displayed when the wireless microphone is muted, e.g. to check the sensitivity before a live broadcast. Recommended presets: • Loud - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 80
Using the SKM 100 G4 Frequency Preset menu item • Manually selecting a frequency bank and channel ► While you Entering names ► In the Name menu item you can enter any name you want for the wireless microphone (e.g. the names of the musicians). The name can be shown in the Frequency/Name and Name/ - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 81
Using the SKM 100 G4 Auto Lock menu item • Switching the automatic lock-off function on and off ► This lock prevents the wireless microphone from being unintentionally switched off and also prevents any unintentional changes to the transmitter's configuration. In the current standard display, the - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 82
"Advanced > Mute Mode menu item (SKM 100 G4-S only)" Activating/deactivating the pilot tone evaluation ▷ See "Advanced > Pilot Tone menu item" Adjusting the contrast of the display panel ▷ See "Advanced > LCD Contrast menu item" Resetting the transmitter ▷ See "Advanced > Reset menu item" Displaying - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 83
Using the SKM 100 G4 Advanced > Tune menu item • Configuring the transmission frequency and frequency bank U When you have configured the wireless microphone to a system bank and you call up the Tune menu item, channel 1 of the frequency bank U is automatically set. The message U.1 briefly appears - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 84
100 G4 Advanced > Mute Mode menu item (SKM 100 G4-S only) • Configuring the function of the MIC button ► AF On/Off mode • When you press the MIC button, no audio signal is transmitted. Disabled mode • No function You can find information about the MIC button under "Muting the handheld transmitter - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 85
Advanced > Reset menu item • Resetting the wireless microphone ► Using the SKM 100 G4 When you reset the wireless microphone, only the selected settings of the pilot tone and the U frequency bank are retained. Advanced > Software Revision menu item • Show software revision You can display - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 86
Using the SK 100 G4 Using the SK 100 G4 These sections contain detailed information about using the SK 100 G4. You can find information on installation and startup of the SK 100 G4 under "Installing the SK 100 G4". 85 - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 87
Using the SK 100 G4 Operating elements of the SK 100 G4 bodypack transmitter ► 1 Display panel • See "Displays on the SK 100 G4 bodypack transmitter display panel" 2 Operation and battery indicator, red LED • illuminated = ON See "Switching the SK 100 G4 bodypack transmitter on and off" • flashing = - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 88
signal See "Deactivating the RF signal (RF mute)" Switching the SK 100 G4 bodypack transmitter on and off ▷ Press the two catches and open the battery compartment cover. To switch on the SK 100 G4: ▷ Hold down the ON/OFF button until the Sennheiser logo appears on the display. To switch off the SK - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 89
Using the SK 100 G4 Muting the bodypack transmitter (AF mute) You can deactivate the audio signal with the MUTE switch. To do this, the MUTE switch function must be configured to AF On/ - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 90
Using the SK 100 G4 Deactivating the RF signal (RF mute) You can deactivate the RF signal in two ways: Deactivating the RF signal with the MUTE switch You can - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 91
Using the SK 100 G4 ▷ Slide the MUTE switch to the MUTE position. The RF signal is deactivated. The message MUTE is shown in the display and the transmission icon no longer appears. 90 - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 92
Using the SK 100 G4 Deactivating the RF signal with the ON/OFF button You can deactivate the RF signal with the ON/OFF button. To deactivate the RF signal: ▷ - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 93
set the automatic lock-off function in the Auto lock menu (see "Buttons for navigating the SK 100 G4 menu"). When you have switched on the lock-off function, you will have to turn the transmitter off and on again in order to operate it. To temporarily deactivate the lock-off function: ▷ Press - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 94
Using the SK 100 G4 Displays on the SK 100 G4 bodypack transmitter display panel You can view the following information on the transmitter display. ► 1 AF audio level • Displays the audio level with peak hold function • See "Sensitivity menu item" 2 Frequency • Configured transmission frequency • - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 95
Using the SK 100 G4 >> "Buttons for navigating the SK 100 G4 menu" >> "Setting options in the menu" Select a standard display ▷ Press the UP or DOWN buttons to select a standard display. Frequency/Name standard display ► 548.100MHz ew100 G4 AF P MUTE Channel/Frequency standard display ► B.Ch: 20.12 - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 96
DOWN buttons to navigate through the individual menu items. ▷ Press the SET button to open the selected menu item. "Operating elements of the SK 100 G4 bodypack transmitter" Making changes in a menu item After you open a menu item, you can make changes as follows: ▷ Press the UP or DOWN buttons to - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 97
Setting options in the menu In the SK 100 G4 menu, you can configure the following settings. Adjusting the input sensitivity ▷ See pilot tone evaluation • Adjusting the contrast of the display panel • Resetting the transmitter • Displaying the current software revision ▷ See "Advanced menu item" 96 - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 98
100 G4 Sensitivity menu item • Adjusting the input sensitivity - AF audio level ► Setting range: 0 dB to -60 dB in 6 dB steps. The AF audio level is also displayed when the bodypack transmitter -45 to -30 dB Frequency Preset menu item • Manually selecting a frequency bank and channel ► While you work - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 99
Entering names ► Using the SK 100 G4 In the Name menu item you can enter any name you want for the bodypack transmitters (e.g. the names of the musicians). the wireless microphone from being unintentionally switched off and also prevents any unintentional changes to the transmitter's configuration. - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 100
Using the SK 100 G4 Advanced menu item In the Advanced submenu you can configure Adjusting the contrast of the display panel ▷ See "Advanced > LCD Contrast menu item" Resetting the transmitter ▷ See "Advanced > Reset menu item" Displaying the current software revision ▷ See "Advanced > Software - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 101
Using the SK 100 G4 Advanced > Tune menu item • Configuring the transmission frequency and frequency bank U When you have configured the bodypack transmitter to a system bank and you call up the Tune menu item, channel 1 of the frequency bank U is automatically set. The message U.1 briefly appears - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 102
Using the SK 100 G4 Advanced > Mute Mode menu item • Configuring the MUTE switch ► AF On mode • No function You can find information about operating the mute switch under "Muting the bodypack transmitter (AF mute)" and "Deactivating the RF signal (RF mute)". Advanced > Cable Emulation menu item - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 103
Using the SK 100 G4 Advanced > Pilot Tone menu item • Activating/deactivating pilot tone transmission ► The pilot tone has an inaudible frequency that is sent from the transmitter and evaluated by the receiver. It supports the receiver's squelch function. Advanced > LCD Contrast menu item • - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 104
Using the SKP 100 G4 Using the SKP 100 G4 These sections contain detailed information about using the SKP 100 G4. You can find information on installation and startup of the SKP 100 G4 under "Installing the SKP 100 G4". 103 - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 105
the SKP 100 G4 plug-on transmitter ► 1 Display panel • See "Displays on the SKP 100 G4 plug-on transmitter display panel" 2 UP button • See "Buttons for navigating the SKP 100 G4 menu" 3 Operation and battery indicator, red LED • illuminated = ON See "Switching the SKP 100 G4 plug-on transmitter on - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 106
Using the SKP 100 G4 Switching the SKP 100 G4 plug-on transmitter on and off To switch on the SKP 100 G4: ▷ Hold down the ON/OFF button until the Sennheiser logo appears on the display. To switch off the SKP 100 G4: ▷ Hold down the ON/OFF button until the display goes off. 105 - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 107
Using the SKP 100 G4 Muting the plug-on transmitter (AF mute) You can mute the audio signal with the MUTE switch. To do this, the MUTE switch function must be configured to AF On/ - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 108
Using the SKP 100 G4 Deactivating the RF signal (RF mute) You can deactivate the RF signal in two ways: Deactivating the RF signal with the MUTE switch You can - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 109
Using the SKP 100 G4 The RF signal is deactivated. The message MUTE is shown in the display and the transmission icon no longer appears. Deactivating the RF signal with - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 110
Using the SKP 100 G4 Lock-off function You can set the automatic lock-off function in the Auto lock menu (see "Auto Lock menu item"). When you have switched on the lock-off function, you will have to turn the transmitter off and on again in order to operate it. To temporarily deactivate the - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 111
Using the SKP 100 G4 Displays on the SKP 100 G4 plug-on transmitter display panel You can view the following information on the transmitter display. ► 1 AF audio level • Displays the audio level with peak hold function • See "Sensitivity menu item" 2 Frequency • Configured transmission frequency • - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 112
Using the SKP 100 G4 >> "Buttons for navigating the SKP 100 G4 menu" >> "Setting options in the menu" Select a standard display ▷ Press the UP or DOWN buttons to select a standard display. Frequency/Name standard display ► 548.100MHz ew100 G4 AF P MUTE Channel/Frequency standard display ► B.Ch: 20. - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 113
DOWN buttons to navigate through the individual menu items. ▷ Press the SET button to open the selected menu item. "Operating elements of the SKP 100 G4 plug-on transmitter" Making changes in a menu item After you open a menu item, you can make changes as follows: ▷ Press the UP or DOWN buttons to - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 114
Using the SKP 100 G4 Setting options in the menu In the SKP 100 G4 menu, you can configure the following settings. Adjusting the input evaluation • Adjusting the contrast of the display panel • Resetting the transmitter • Displaying the current software revision ▷ See "Advanced menu item" 113 - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 115
SKP 100 G4 Sensitivity menu item • Adjusting the input sensitivity - AF audio level ► Setting range: 0 dB to -48 dB in 6 dB steps. The AF audio level is also displayed when the plug-on transmitter is muted, e.g. to check the sensitivity before a live broadcast. Frequency Preset menu item • Manually - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 116
Entering names ► Using the SKP 100 G4 In the Name menu item you can enter any name you want for the bodypack transmitters (e.g. the names of the musicians the wireless microphone from being unintentionally switched off and also prevents any unintentional changes to the transmitter's configuration. - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 117
Using the SKP 100 G4 Advanced menu item In the Advanced submenu you can configure enhanced Adjusting the contrast of the display panel ▷ See "Advanced > LCD Contrast menu item" Resetting the transmitter ▷ See "Advanced > Reset menu item" Displaying the current software revision ▷ See "Advanced > - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 118
Using the SKP 100 G4 Advanced > Tune menu item • Configuring the transmission frequency and frequency bank U When you have configured the bodypack transmitter to a system bank and you call up the Tune menu item, channel 1 of the frequency bank U is automatically set. The message U.1 briefly appears - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 119
Using the SKP 100 G4 Advanced > find information about operating the mute switch under "Muting the plug-on transmitter (AF mute)" and "Deactivating the RF signal (RF frequency that is sent from the transmitter and evaluated by the receiver. It supports the receiver's squelch function. Advanced - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 120
Advanced > Reset menu item • Resetting the plug-on transmitter ► Using the SKP 100 G4 When you reset the plug-on transmitter, only the selected settings of the pilot tone and the U frequency bank are retained. Advanced > Software Revision menu item • Show software revision You can display - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 121
"Synchronizing devices"). 3. Set the frequency on the receiver and the transmitter manually (EK 100 G4: "Frequency Preset menu item", SKM 100 G4: "Frequency Preset menu item", SK 100 G4: "Frequency Preset menu item", SKP 100 G4: "Frequency Preset menu item") Setting notes Please note the following - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 122
Synchronizing devices Synchronizing devices You can synchronize ew 100 P G4 series transmitters and receivers via the receiver's infrared interface. To synchronize the devices: ▷ Switch the transmitter and the receiver on. ▷ Call up the Sync menu item on the receiver. Sync appears in the receiver's - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 123
find information about the different variants of the products in the ew 100 P G4 series as well as technical data for the individual products. " You can also find information about safely cleaning and maintaining evolution wireless G4 series products as well as help in the event of malfunctions. • - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 124
Product variants Product variants EK 100 G4 product variants Made in Germany ► EK 100 G4-A1 EK 100 G4-A EK 100 G4-GB EK 100 G4-G EK 100 G4-B EK 100 G4-C EK 100 G4-E EK 100 G4-K+ 470 - 516 MHz 516 - 558 MHz 606 - 648 MHz 566 - 608 MHz 626 - 668 MHz 734 - 776 MHz 823 - 865 MHz 925 - 937.5 MHz Art - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 125
- 608 MHz 626 - 668 MHz 734 - 776 MHz 823 - 865 MHz 1785 - 1800 MHz 925 - 937.5 MHz ► SKM 100 G4-A1 SKM 100 G4-A SKM 100 G4-GB SKM 100 G4-G SKM 100 G4-B SKM 100 G4-C SKM 100 G4-E SKM 100 G4-1G8 SKM 100 G4-K+ 470 - 516 MHz 516 - 558 MHz 606 - 648 MHz 566 - 608 MHz 626 - 668 MHz 734 - 776 MHz 823 - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 126
. 508004 Art. no. 508005 Art. no. 508006 Art. no. 508007 Art. no. 508008 SK 100 G4 product variants Made in Germany ► SK 100 G4-A1 SK 100 G4-A SK 100 G4-GB SK 100 G4-G SK 100 G4-B SK 100 G4-C SK 100 G4-E SK 100 G4-1G8 SK 100 G4-K+ 470 - 516 MHz 516 - 558 MHz 606 - 648 MHz 566 - 608 MHz 626 - 668 - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 127
Product variants SKP 100 G4 product variants Made in Germany ► SKP 100 G4-A1 SKP 100 G4-A SKP 100 G4-GB SKP 100 G4-G SKP 100 G4-B SKP 100 G4-C SKP 100 G4-E SKP 100 G4-K+ 470 - 516 MHz 516 - 558 MHz 606 - 648 MHz 566 - 608 MHz 626 - 668 MHz 734 - 776 MHz 823 - 865 MHz 925 - 937.5 MHz Art. - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 128
Frequency tables Frequency tables You can find frequency tables for all available frequency ranges in the download section of the Sennheiser website uneer www.sennheiser.com/ download. Download area of the Sennheiser website Enter ew G4 into the search bar to show the frequency tables. 127 - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 129
Specifications Specifications You can find the cross-system and product-specific technical data in the sections below. 128 - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 130
EK 100 G4 RF characteristics ► Modulation Receiving frequency ranges Receiving frequencies Switching bandwidth Nominal/peak deviation Receiver principle Sensitivity (with HDX, peak deviation) Adjacent channel selection Intermodulation attenuation Blocking Squelch Pilot tone squelch Wideband FM A1: - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 131
AF output voltage (at peak deviation, 1 kHz AF) "AF Out" setting range Sennheiser HDX ≥ 110 dBA ≤ 0.9 % 3.5 mm jack socket +12 dBu (mono, 3 V battery / 2.4 V rechargeable battery at nominal voltage: typically 180 mA with transmitter switched off: ≤ 25 μA Typically 8 h Approx. 82 x 64 x 24 mm Approx - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 132
100 G4 RF characteristics ► Modulation Receiving frequency ranges Transmission frequencies Switching bandwidth Nominal/peak deviation Frequency stability RF output power at 50 ? Pilot tone squelch Wideband FM A1: 470 - 516 MHz A: 516 - 558 MHz AS: 520 - 558 MHz G: 566 - 608 MHz GB Sennheiser - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 133
Overall device ► Temperature range Power supply Nominal voltage Power consumption at nominal voltage with transmitter switched off Operating time Dimensions Weight (with batteries) -10 °C to +55 °C (14 °F to 131 °F) 2 AA batteries, 1,5 V or BA 2015 accupack 3 V battery / 2.4 V rechargeable battery - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 134
SK 100 G4 RF characteristics ► Modulation Receiving frequency ranges Transmission frequencies Switching bandwidth Nominal/peak deviation Frequency stability RF output power at 50 ? Pilot tone squelch Wideband FM A1: 470 - 516 MHz A: 516 - 558 MHz AS: 520 - 558 MHz G: 566 - 608 MHz GB: 606 - 648 MHz - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 135
Overall device ► Temperature range Power supply Nominal voltage Power consumption at nominal voltage with transmitter switched off Operating time Dimensions Weight (with batteries) -10 °C to +55 °C (14 °F to 131 °F) 2 AA batteries, 1,5 V or BA 2015 accupack 3 V battery 2.4 V rechargeable battery - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 136
SKP 100 G4 RF characteristics ► Modulation Receiving frequency ranges Transmission frequencies Switching bandwidth Nominal/peak deviation Frequency stability RF output power at 50 ? Pilot tone squelch Wideband FM A1: 470 - 516 MHz A: 516 - 558 MHz AS: 520 - 558 MHz G: 566 - 608 MHz GB: 606 - 648 - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 137
AF characteristics ► Compander system Sennheiser HDX AF frequency response 80 - 18,000 Hz Signal-to- BA 2015 accupack 3 V battery / 2.4 V rechargeable battery at nominal voltage: typically 180 mA with transmitter switched off: ≤ 25 μA Typically 8 h Approx. 105 x 43 x 43 mm Approx. 195 g 136 - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 138
EK IEM G4 • EK 500 G4 3.5 mm mic jack plug ► Mic • Plug for lavalier and headset microphone, e.g. ME 2. • Connect to: • SK 100 G4 • SK 300 G4 • SK 500 G4 3.5 mm line jack plug ► Line + • Plug for line and instrument cables, e.g. Ci 1-N • Connect to: • SK 100 G4 • SK 300 G4 • SK 500 G4 6.3 mm stereo - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 139
mm mono jack plug, unbalanced ► • Connect to: • EM 100 G4 Audio Out • EM 300-500 G4 Audio Out 6.3 mm stereo jack plug for headphone jack ► LR • Connect to: • EM 100 G4 headphone input • EM 300-500 G4 headphone input • SR IEM G4 headphone input XLR-3 plug, balanced ► 21 3 Hollow jack plug for power - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 140
following information when cleaning and maintaining evolution wireless G4 series products. CAUTION Liquids can damage the products instructions below for the following products. Cleaning the sound inlet basket of the microphone module ▷ Unscrew the top sound inlet basket from the microphone - Sennheiser SKP 100 G4 | Instruction manual ew 100 P G4 PDF - Page 141
Cleaning and maintenance ▷ Screw the sound inlet basket back onto the microphone module. From time to time, you should also clean the microphone module contacts: ▷ Wipe the contacts of the microphone module with a soft, dry cloth. 140
Instruction Manual
evolution wireless G4
100 P series
Sennheiser electronic GmbH & Co. KG
Am Labor 1, 30900 Wedemark, Germany, www.sennheiser.com
ew 100 P G4 - v
2.
2