Sharp AF-08ERL AF-08ERL Operation Manual

Sharp AF-08ERL Manual

Sharp AF-08ERL manual content summary:

  • Sharp AF-08ERL | AF-08ERL Operation Manual - Page 1
    AF-08ERL ROOM AIR CONDITIONER INSTALLATION AND OPERATION MANUAL This INSTALLATION AND OPERATION MANUAL explains the proper use of your new Sharp Air Conditioner. Read these instructions carefully before installing or operating your air conditioner. The INSTALLATION AND OPERATION MANUAL should be
  • Sharp AF-08ERL | AF-08ERL Operation Manual - Page 2
    NUMBER DATE OF PURCHASE Dealer Name Address City State Zip Telephone TO PHONE: Dial 1-800-BE-SHARP (237-4277) for: SERVICE (for your nearest Sharp Authorized Servicer) PARTS (for your Authorized Parts Distributor) ACCESSORIES ADDITIONAL CUSTOMER INFORMATION TO WRITE: For service problems, warranty
  • Sharp AF-08ERL | AF-08ERL Operation Manual - Page 3
    Product: AF-08ERL Room Air Conditioner. Be sure to have this information available when you need service for your Product. One (1) year parts and labor from date of purchase. The warranty period continues for a total of five (5) years from date of purchase for the Sealed Cooling System parts; labor
  • Sharp AF-08ERL | AF-08ERL Operation Manual - Page 4
    instructions carefully. Use the enclosed MOUNTING KIT for proper installation. CHECK WINDOW AREA The mounting kit is designed for wooden sill double or single hung sash-type windows level. • The room air conditioner must be installed in an area within reach of a properly rated grounded outlet. •
  • Sharp AF-08ERL | AF-08ERL Operation Manual - Page 5
    INSTALLATION INSTRUCTIONS ACCESSORIES No. Accessories 1 Right closure assembly 2 Left closure assembly 3 Window sash foam seal 4 Window sash foam seal (adhesive type) 5 Bottom gasket 6 Screws (L=1", 25.4mm) 7 Screws (L= 13/32", 10mm) 8 Base pan angle 9 Remote control 10 Battery Q'ty 1
  • Sharp AF-08ERL | AF-08ERL Operation Manual - Page 6
    bottom tray during operation will not drain properly and may flow into the room where the air conditioner is installed. 4 Insert the bottom gasket into the space between the window sill and the bottom of the unit to seal outside air. If there is space between the bottom channel and the sill, fill
  • Sharp AF-08ERL | AF-08ERL Operation Manual - Page 7
    INSTALLATION INSTRUCTIONS 5 Insert the closure assemblies on both sides into the rails of the jamb. Jamb (Left) the closure assemblies to the sill with two of the provided screws. (L=1", 25.4mm) 9 Cut the window sash foam seal to the proper length and seal the opening between the top of the inside
  • Sharp AF-08ERL | AF-08ERL Operation Manual - Page 8
    the air conditioner by following the installation instructions given in the previous section of this manual. • Make sure the unit is the correct capacity for the area you want to cool. • Do not modify any part of this product. • Do not insert objects into any part of the unit. • Push the AC
  • Sharp AF-08ERL | AF-08ERL Operation Manual - Page 9
    doors open and let hot air rush in. Improperly installed air conditioners and improperly weatherstripped doors and windows will let hot air in and the cool air out. • Turn off air conditioner when no one is home. Use only when necessary. The fewer hours a room air conditioner is used, the lower the
  • Sharp AF-08ERL | AF-08ERL Operation Manual - Page 10
    Rear Cabinet 8 Air Inlet (Outdoor side)  9 Filter (Pull the filter handle to the right to remove.) 10 Filter Handle  11 Power Cord CONTROL PANEL  F hr ! SLEEP COOL TEMP SELECTOR TIMER ON/OFF ENERGY SAVER POWER ON/OFF "# $ 1 Receiver window for remote control signal 2 Display
  • Sharp AF-08ERL | AF-08ERL Operation Manual - Page 11
    mode and fan speed. • Fan speed and operation mode will change as you touch. HIGH COOL MED COOL LOW COOL LOW FAN MED FAN HIGH FAN NOTES ON OPERATION MODE: MODE COOL indicator HIGH COOL light on MED COOL light on LOW COOL light on HIGH FAN light off MED FAN light off LOW FAN light off
  • Sharp AF-08ERL | AF-08ERL Operation Manual - Page 12
    The horizontal louvers are used to adjust the UP / DOWN direction of air flow, and the vertical louvers are used to adjust the LEFT / RIGHT direction of air flow for uniform and efficient cooling of the room. Horizontal louvers Vertical louvers Adjust UP/DOWN air flow 12 Adjust LEFT/RIGHT
  • Sharp AF-08ERL | AF-08ERL Operation Manual - Page 13
    is set, the temperature setting is automatically adjusted to prevent the room from becoming too cold while you sleep. One hour after the hours. SLEEP indicator F hr During cooling operation 1 Press the SLEEP button on the remote control. SLEEP SLEEP COOL TEMP SELECTOR TIMER ON/OFF ENERGY
  • Sharp AF-08ERL | AF-08ERL Operation Manual - Page 14
    , or in 1 hour increments from 10 to 12 hours in advance of the start time. • The unit will start automatically according to your setting. COOL indicator F hr SLEEP COOL TEMP SELECTOR TIMER ON/OFF ENERGY SAVER POWER ON/OFF TIMER ON/OFF pad TIMER indicator (If you wish to start the operation
  • Sharp AF-08ERL | AF-08ERL Operation Manual - Page 15
    in advance of the stop time. • The unit will stop automatically according to your setting. F hr SLEEP COOL TEMP SELECTOR TIMER ON/OFF ENERGY SAVER POWER ON/OFF TIMER ON/OFF pad TIMER indicator (If you wish automatically start. • OFF TIMER OPERATION can also be set with the REMOTE CONTROL. 15
  • Sharp AF-08ERL | AF-08ERL Operation Manual - Page 16
    receiver window to direct sunlight. This can adversely affect its operation. In such case, close the curtains to block the sunlight. • Use of a fluorescent lamp in the same room may interfere with the transmission of the signal. • The unit may be affected by signals emitted from the remote control
  • Sharp AF-08ERL | AF-08ERL Operation Manual - Page 17
    fan speed and operation mode. HIGH MED LOW HIGH MED LOW COOL COOL COOL FAN FAN FAN AIR CONDITIONER OFF TIMER button Push to set delay "OFF" timer during operation is used for the Power ON/OFF and TEMP buttons. Keep the remote control in a lighted place for several hours in order for the buttons to
  • Sharp AF-08ERL | AF-08ERL Operation Manual - Page 18
    air flow will be reduced, resulting in poor cooling performance. The filter should be cleaned every 10 days. At the beginning of every cooling harsh chemicals or abrasive cleaners on any part of the unit. To avoid damage to REMOVING THE AIR CONDITIONER Before removing the air conditioner, operate the
  • Sharp AF-08ERL | AF-08ERL Operation Manual - Page 19
    and replace. Run the air conditioner on the MED FAN setting until all ice dissipates. • Is the temperature set properly? If your room is too warm, adjust the temperature setting lower. If your room is too cool, adjust the temperature setting higher. • Is the window exposed to direct sunlight? Close
  • Sharp AF-08ERL | AF-08ERL Operation Manual - Page 20
    SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07430-2135 SHARP CORPORATION Osaka, Japan Printed in Thailand TINSEA368JBRZ 03MO TH 1
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

ROOM AIR CONDITIONER
INSTALLATION AND OPERATION
MANUAL
PAGE
CONTENTS
This INSTALLATION AND OPERATION
MANUAL explains the proper use of your
new
Sharp Air Conditioner. Read these instructions
carefully before installing
or operating
your air
conditioner. The INSTALLATION
AND
OP-
ERATION
MANUAL
should be kept in a safe
place for handy reference.
FOR YOUR PROTECTION
....................
2
CONSUMER LIMITED WARRANTY
.....
3
INSTALLATION INSTRUCTIONS
• CHECK WINDOW AREA
........................
4
• LOCATlON
..............................................
4
• ACCESSORIES
......................................
5
• SUGGESTED TOOLS
............................
5
• INSTALLATION
.......................................
6
PRECAUTIONS
CAUTION FOR USE
............................
8
• GROUNDING INSTRUCTIONS
...........
8
• NOTES ON OPERATION
....................
9
• ENERGY EFFICIENCY TIPS
...............
9
HOW TO OPERATE
PARTS NAMES
...................................
10
COOLING OPERATION
......................
11
TO CHANGE FAN SPEED AND OPERATION MODE ..
11
TO CHANGE TEMPERATURE SETTING
..........
12
TO CHANGE AIR FLOW DIRECTION
.......
12
• ENERGY SAVER OPERATION
...........
13
• SLEEP OPERATION
...........................
13
• ON TIMER OPERATION
.....................
14
• OFF TIMER OPERATION
....................
15
• USING THE REMOTE CONTROL
.......
16
CLEANING AND MAINTENANCE
........
18
BEFORE CALLING FOR SERVlCE
......
19
AF-08ERL