Sharp AL-1650 AL-1650 Operation Manual

Sharp AL-1650 Manual

Get Sharp AL-1650 PDF manuals and user guides View all Sharp AL-1650 manuals
Add to My Manuals
Save this manual to your list of manuals

Sharp AL-1650 manual content summary:

  • Sharp AL-1650 | AL-1650 Operation Manual - Page 1
    MODEL AL-1650 DIGITAL LASER COPIER OPERATION MANUAL Page • GETTING STARTED 2 • MAKING COPIES 16 • STATUS INDICATORS 32 • GENERAL INFORMATION 42
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 2
    Address State Zip SERIAL NUMBER City Telephone City Telephone For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, or supplies, please call 1 - 800 - BE-SHARP For customer assistance, please visit http://www.sharpusa.com on the World Wide Web
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 3
    . For description of the printer features, see the printer manual. Conventions used in this manual In this manual, the following icons are used to provide the user with information pertinent to the use of the copier. Warns the user that injury to the user or damage to the copier may result if the
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 4
    laser radiation. For your safety, observe the precautions below. q Do not remove the cabinet, operation panel or any other covers. q The copier's exterior covers contain several safety interlock switches. Do not bypass any safety interlock by inserting wedges or other items into switch slots. Use of
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 5
    dpi is performed. q In addition to the automatic exposure mode, the manual exposure can be adjusted in five steps. q The photo mode copying .  Printer feature q This copier can be used as a laser printer. ≈ Environmentally friendly design q Paper output tray is housed in the copier for space
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 6
    tray Each tray holds 250 sheets of copy paper. o Side cover Open to remove misfeeds and to service the copier. !0 Side cover handle Lift and pull to open the side cover. !1 Bypass tray guides Adjust to the width of the copy paper. !2 Bypass tray Special papers (including transparency film) and copy
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 7
    handle Hold to pull out the drum cartridge. @0 Drum cartridge Copy images are formed on the photoconductive drum. @1 TD cartridge lock release lever Use to unlock the TD cartridge. @2 TD cartridge strap Lift to remove the TD cartridge. @3 TD cartridge Contains toner. @4 Roller rotating knob Turn to
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 8
    Operation panel and keys for printer functions See the printer manual. w AUTO/MANUAL/PHOTO ( / / : TD cartridge replacement required indicator (p.32) : Drum replacement required returns the copier to the initial settings. !3 POWER SAVE ( ) indicator (p. 44) Lights up when the copier is in the
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 9
    dark ( ) keys and indicators (p. 17) Use to adjust the MANUAL ( ) or PHOTO ( ) exposure level. !8 AUTO IMAGE ( select the desired copy quantity or to make user program entries. @5 CLEAR ( ) key on. Press to start copying. Initial settings The copier assumes the initial settings when it is first
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 10
    , the light may flicker. 4" (10 cm) Be sure to allow the required space around the machine for servicing and proper ventilation. A small amount of ozone is produced within the copier during operation. The emission level is insufficient to cause any health hazard. NOTE: The present recommended long
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 11
    on handling CAUTIONS ON HANDLING Be careful in handling the copier as follows to maintain the performance of this copier. Do not drop the copier, subject it to shock or strike it against any object. Do not expose the drum cartridge to direct sunlight. Doing so will damage the surface (green
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 12
    Open the carton and check to ensure that the following components and accessories are included. TD cartridge Operation manual Power cord Copier Drum cartridge (installed in copier) Checking packed components and accessories q If anything is not included or is damaged, contact our Technical
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 13
    in the paper tray as described in step 6 because it must be used if the copier has to be moved. (p. 52) 3 Install the TD cartridge. q For installation of the TD cartridge, see steps 1 and 2 and steps 4 to 7 of TD CARTRIDGE REPLACEMENT on pages 32 and 33. 4 Gently lift and pull out the paper tray
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 14
    , you will need to make sure that your local power supply is compatible with your model. If you plug the copier into an incompatible power supply, irreparable damage to the copier will result. Only insert the power cord into a properly grounded wall socket. Do not use extension cords or power strips
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 15
    copier has been designed with one (AL-1620) or two (AL-1621) adjustable front-loading trays, which are easily opened for paper loading. For best results, use only SHARP of copies may become smudged with toner. Also, the AUTO PAPER line q Set the paper along the guides. q The tray holds up to 250
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 16
    the lock lever of the front guide and slide the front guide to match the width of the paper. Front guide 4 Move the left guide to the appropriate slot as marked may occur. q When using 11" x 17" copy paper, store the left guide in the slot at the left front of the paper tray. 5 Load copy paper
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 17
    LOADING COPY PAPER GETTING STARTED Loading copy paper 8 To set the selected paper size, press the PAPER SIZE ENTER ( ) key. q The selected paper feed location indicator will blink and the corre- sponding paper size (which is currently set) indicator will light up steadily. All other
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 18
    table. 3 Adjust the original guides to the size of the originals desired paper tray. See page 42, USER PROGRAMS. q To copy onto a different copier has three exposure modes to choose from - AUTOMATIC ( ), MANUAL ( ), and PHOTO ( ). q Automatic exposure is the standard initial setting for this copier
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 19
    COPYING MAKING COPIES Normal copying q For manual copy density adjustment, press the AUTO/MANUAL/ PHOTO ( / / ) key to select MANUAL ( ) and adjust with the light feeding mode If the stream feeding mode has been enabled using user program No. 4, the SPF indicator will continue to blink for
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 20
    tray cannot be selected automatically. 5 Adjust the copy density. q This copier has three exposure modes to choose from - AUTOMATIC ( ), MANUAL ( ), and PHOTO ( ). q Automatic exposure is the standard initial setting for this copier. In this mode, the characteristics of the original are "read
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 21
    NORMAL COPYING q For photographs, select PHOTO ( ) and then adjust with the light ( ) and dark ( ) keys as desired. q There are 5 exposure steps indicated by 3 indicator lights. (The indicators light up one or two at a time.) If exposure level 2 is selected, the two left-handmost indicators for
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 22
    REDUCTION/ENLARGEMENT/ZOOM Reduction and enlargement ratios can be selected either automatically with the AUTO IMAGE ( ) key or manually with the PRESET RATIO selector ( , ) keys and/or the zoom ( , ) keys. The zoom function enables precise copy ratio selection from 50% to 200% in 1% increments
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 23
    REDUCTION/ENLARGEMENT/ZOOM MAKING COPIES Reduction/enlargement/zoom Manual 1 Place the original in the document feeder tray or on the original table. 2 Use the PRESET RATIO selector ( , ) keys and the zoom ( , ) keys to select
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 24
    as large as the original image. 1 Unfold the bypass tray. q When feeding 8-1/2" x 14" or 11" x 17" sized paper, extend the bypass tray. 2 Set the paper guides to the copy paper width. 3 Insert the copy paper (print face down) all the way into the bypass tray. q Up to 100 sheets of standard
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 25
    BYPASS FEED (special paper) 4 Press the TRAY SELECT ( tray. ) key to select the bypass 5 Leave the copy quantity at 0 if using special papers. Set the number of copies if using standard copy paper or envelopes. 6 Press the START ( ) key. MAKING COPIES Bypass feed (special paper) 23
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 26
    TWO-SIDED COPYING Two-sided copies can be made on this copier using the bypass tray. MAKING COPIES Two-sided copying 1 Place the first original on the original table and make a copy. q The first copy can be
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 27
    XY ZOOM Original Copy The XY ZOOM feature allows the horizontal and vertical copy ratios to be changed independently. To use the XY ZOOM feature with the DUAL PAGE COPY feature, set the DUAL PAGE COPY feature first and then the XY ZOOM feature. (Enlargement cannot be set.) MAKING COPIES XY zoom
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 28
    XY ZOOM MAKING COPIES XY zoom 5 Use the PRESET RATIO selector ( , ) keys and zoom ( , ) keys to change the copy ratio in the horizontal direction in a similar manner as for the vertical direction. 6 Press the copy ratio display ( ) key. q The selected ratio for the horizontal direction will be
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 29
    exposure mode will be automatically set to the MANUAL mode. Other exposure modes cannot be selected. Even if this feature is canceled, the MANUAL mode will not automatically be canceled. MAKING COPIES TRAY SELECT ( ) key. 4 Make all other desired copier selections and press the START ( ) key. 27
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 30
    MAKING COPIES DUAL PAGE COPY Original Copy The DUAL PAGE COPY feature produces individual copies of two documents placed side by side on the original table. It is especially useful when copying books and other bound documents. If the AUTO IMAGE feature has been selected, this feature cannot be
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 31
    INTERRUPT is used to interrupt a long copy run so that another job can be done. 1 Press the INTERRUPT ( ) key. q The copier will return to the initial settings. q When the SPF is being used, the copier will stop after completing copying of the original which has been fed into the SPF. 2 When the
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 32
    setting is level "3". 3 Press the light ( ) or dark ( ) key to lighten or darken the automatic exposure level as desired. 4 Press the AUTO/MANUAL/PHOTO ( / / ) key. q The AUTO indicator will stop blinking and will light up steadily. q This automatic exposure level will remain in effect until you
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 33
    below for setting the toning level. MAKING COPIES Toner save mode 1 Press the AUTO/MANUAL/PHOTO ( to select the MANUAL ( ) mode. / / ) key 2 Press and hold down the AUTO/MANUAL/PHOTO ( / ) key for approximately 5 seconds. / q The MANUAL ( ) indicator will go out and the PHOTO ( ) indicator
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 34
    . Replace the TD cartridge by following the procedure below. For best copying results, be sure to use only SHARP Genuine Supplies which are designed, engineered and tested to maximize the life and performance of SHARP copiers. Look for the Genuine Supplies label on the toner package. GENUINE
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 35
    in the direction indicated by the arrow in the illustration. 6 Gently insert the TD cartridge along the guides until it locks in place. If dirt or dust is adhered to the TD cartridge, remove it before installing the cartridge. 7 Close the front cover by pushing both sides with your hands and then
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 36
    (black paper) of a new drum cartridge before use. The cover protects the drum against external light. For best copying results, be sure to use only SHARP Genuine Supplies which are designed, engineered and tested to maximize the life and performance of SHARP copiers. Look for the Genuine Supplies
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 37
    the lead end of the drum cartridge along the guides. Do not touch the surface of the drum (green portion) of the cartridge. Doing so may cause smudges on the copies. 6 Remove the protective cover from the drum cartridge and then push the cartridge all the way into the copier. 7 Gently install the TD
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 38
    careful not to damage the photoconductive drum. First confirm the misfeed location. (P. 36) (P. 37, 40) (P. 40) STATUS INDICATORS Misfeed removal A C Location A Left feeding roller cover Misfeed in the SPF If an original misfeed occurs in the SPF, the copier will B stop and the red indicator
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 39
    cover out until it stops. Close the side cover by pressing the handle on the cover. q The misfeed ( ) indicator will go out. Misfeed in the copier 1 Open the bypass tray. Lift slightly on the side cover and slide the cover out until it stops. 37 Misfeed removal
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 40
    the misfeed location. Remove the misfed paper following the instructions for each location in the illustration below. If the . Do not touch the surface of the drum (green portion) of the drum cartridge when removing the misfed paper. Doing so may damage the drum and cause smudges on copies. 3 Close
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 41
    drum (green portion) of the drum cartridge when removing the misfed paper. Doing so may damage the drum and cause smudges on copies. q Be careful about unfixed toner the transport area 1 Open the paper guide by pressing down the projection on either side of the guide and remove the misfed paper. The
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 42
    MISFEED REMOVAL 3 Close the side cover by pressing the handle on the cover. q The misfeed ( ) indicator will go out. Misfeed in the upper paper tray Before opening the paper tray, be sure to open the bypass tray, lift slightly on the side cover and slide the cover out until it stops, and then
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 43
    MISFEED REMOVAL 2 Remove the misfed paper. q Be careful not to tear the misfed paper during removal. 3 If the misfed paper is not seen in step 2, gently lift and pull out the lower paper tray and remove the misfed paper. q Be careful not to tear the misfed paper during removal. 4 Close the paper
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 44
    programs allow the parameters of certain functions to be set, changed, or canceled as desired. List of user programs This copier has the following user programs. Program No. Program name 1 Auto clear time 2 Preheat mode 3 Auto power shut-off timer 4 Stream feeding mode 5 Auto power
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 45
    quantity display will be steadily lit and the entered value will be stored. User programs GENERAL INFORMATION 6 To continue with other user programs, press the CLEAR ( ) key and then repeat steps 2 to 5. To exit the user program mode, press the light ( ) key. q All the alarm indicators will go
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 46
    30 min. for auto power shut-off mode. These times can be changed using user programs. It is suggested that you set appropriate times according to the actual usage of the copier. (See page 42.) Preheat mode When the copier enters the preheat mode, the POWER SAVE ( ) indicator will light up and other
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 47
    SAVE MODES Setting the power save modes The time that elapses before the copier enters a power save mode after any operation is made can be set manually. This time is set with user program No. 2 for the preheat mode and user program No. 3 for the auto power shut-off mode. For these settings, see
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 48
    USER MAINTENANCE Proper care is essential for clean, sharp copies. Please take a few minutes to regularly clean your copier. Original water. Do not use thinner, benzene, or similar volatile cleaning agents. User maintenance GENERAL INFORMATION q Also wipe the scanning window on the orignal table
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 49
    USER MAINTENANCE User maintenance 1 Turn the power switch off. 2 Open the bypass tray. cleaner is stopped on the way, smudges on copies may occur. q If the white sheet metal is smudged with toner, wipe it with a soft, clean cloth. 5 Return the charger cleaner to its original position. Close the
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 50
    COPIER TROUBLE? Problem Copier does not operate. Copies are too dark or too light. Blank copies Copies smear if rubbed. q Copier plugged in? Solution Plug the copier into a grounded outlet. See page 8. q Power switch ON? Turn the power switch ON. See page 16. q Copy density properly adjusted?
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 51
    locate the problem and stop the copier to prevent damage. An alphanumeric code will appear in the copy quantity display. Example Should the copier completely stop and a letter and a number appear alternately, contact your SHARP service center immediately. 49 Copier trouble? GENERAL INFORMATION
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 52
    These will cause physical damage to the copier. q For best results, use only paper recommended by SHARP. q Special papers except envelopes must be sure to use only genuine SHARP parts and supplies. Supply list Supply TD cartridge Drum cartridge Part number AL-160TD AL-160DR Usable life Approx. 15
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 53
    that are to be replaced by the user are copy paper, TD cartridge, and drum cartridge. For best copying results, be sure to use only SHARP Genuine Supplies which are designed, engineered and tested to maximize the life and performance of SHARP copiers. Look for the Genuine Supplies label on the
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 54
    front cover to open the cover. Moving instructions TD cartridge lock release lever 3 Lift the TD cartridge lock release lever and pull the cartridge out until the green strap handle can be grasped by the right hand. Lift the cartridge by the handle while supporting it with the left hand at the
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 55
    SPECIFICATIONS COPIER Type Copy system Originals Original sizes Copy sizes Copying speed (at 100% copy ratio) Continuous copy First-copy time Warm-up time Copy ratio Exposure
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 56
    bypass tray folded) Weight Copier dimensions Operating conditions 23-15/64" (W) x 20-23/32" (D) (590 mm (W) x 526 mm (D)) Approx. 70.6 lbs. (32 kg) TD and drum cartridges included 23-15/64" a part of our policy of continuous improvement, SHARP reserves the right to make design and specification
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 57
    tray 22 C Cautions on handling 9 Copier trouble 48 Copying - normal 16 - reduction/ cover 4 Document feeder tray 5, 16 Drum cartridge - indicator 34 - replacement 34 Dual user maintenance 46 Manual exposure 17 Manual feeding 22 Misfeed removal - bypass tray 37 - in the copier 37
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 58
    paper 22 Specifications - copier 53 - paper 50 - SPF 54 SPF 5, 16, 54 Status indicators 32 Supply - life 50 - part number 50 - storage 51 T TD cartridge replacement 32 Toner save mode 31 Total number of copies 7 Troubleshooting 48 Two-sided copying 24 U User maintenance - bypass tray
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 59
    Identification Product: AL-160TD (Black Toner) Date Issued:Nov. 1, 1998 MSDS No. F-00841 Section 2. Supplier's Name and Address Sharp Corporation 22-22 exposure based on animal tests performed using toner. When used as intended according to instructions, studies do not indicate any symptoms of
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 60
    Use Personal Protection Information (Respiratory, Eye Protection and Protective Glove): Use of a dust mask is recommended when handling a large quantity of toner or during long term exposure, as with any non-toxic dust. Engineering Control / Ventilation: Not required. Work / Hygienic Practice
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 61
    Identification Product AL-160TD(Black Developer) Date Issued :Nov. 1, 1998 MSDS No. F-30841 Section 2. Supplier's Name and Address Sharp Corporation 22-22 Overview) Developer is a black powder containing small amounts of toner, and possessing no immediate hazard. There are no anticipated
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 62
    , Lyon, pp149-261 H. Muhle, B. Bellmann, O. Creutzenberg, C. Dasenbrock, H. Ernst, R. Kilpper, J. C. MacKenzie, P. Morrow, U. Mohr, S. Takenaka, and R. Mermelstein (1991) Pulmonary Response to Toner upon Chronic Inhalation Exposure in Rats. Fundamental and Applied Toxicology 17, pp. 280-299 60
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 63
    MEMO 61
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 64
    MEMO
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 65
    to this equipment not expressly approved by the manufacturer could void the user's authority to operate this equipment. Note: This equipment has been and, if not installed and used in accordance with the operation manual, may cause harmful interference to radio communications. Operation of this
  • Sharp AL-1650 | AL-1650 Operation Manual - Page 66
    AL-1650 SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07430-2135. www.sharp-usa.com SHARP CORPORATION PRINTED IN HONG KONG 99D KS TINSE0230QSZZ
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
•
GETTING STARTED
•
MAKING COPIES
•
STATUS INDICATORS
•
GENERAL INFORMATION
2
16
32
42
DIGITAL LASER COPIER
OPERATION MANUAL
MODEL
AL-1650
Page